We are seeing repeated occurrences of the following log line in test runs triggered via .xctestrun files on iOS 26: IDERunDestination: Supported platforms for the buildables in the current scheme is empty. This line is printed n number of times after a test fails, significantly increasing test execution duration (2–3 minutes extra in some cases). The issue does not occur when tests are built and run together from Xcode directly — it’s specific to .xctestrun-based executions using xcodebuild test-without-building. Steps to Reproduce: Use Xcode 26 to build a sample XCTest target (we used a simple UI test project). Locate the generated .xctestrun file under DerivedData/.../Build/Products/.... Run tests using: xcodebuild -xctestrun /path/to/sample.xctestrun \ -destination "id=<device_id>" \ test-without-building Observe the logs during test failure. Observed Behavior: The log line IDERunDestination: Supported platforms for the buildables in the current scheme is empty appears multiple times. The test cleanup and teardown phase takes significantly longer (2–3 minutes). Expected Behavior: The log should appear once or not at all. Test cleanup time should remain consistent. Additional Information: Affects only iOS 26 devices and .xctestrun-based runs. Not reproducible on iOS < 26. Xcode 26 and 26.x beta versions tried. Reproducible both locally and on CI systems using real devices. Same .xctestrun file, when used on older OS versions, does not cause delay.