I'm working on an application that uses the iPhone camera for scientific purposes - and, as a result would like to receive video in as unprocessed format as possible. In particular, I'm interested in getting pixel buffers that contain pretty much the bayer data as the sensor sees it - with the minimum processing of color possible. Currently we configure the AVCaptureDevice to fix the focus and exposure, use a low ISO with no gain and set the white balance gains to 1. AVCaptureVideoDataOutput is using 32BGRA. What I'd like to do is remove any additional color and brightness processing such that the data is effectively processed with a linear transfer function (i.e. gamma function is 1). I thought that this might be down to using the AVCaptureDevice activeColorSpace - we currently use P3_D65 for this. But there only seems to be a few choices (e.g. sRGB, HLG_BT2020) all of which I think affect the gamma. So: is it possible to control or specify the gamma / transfer function when using CaptureVideoDelegate? if not, does one of the color space settings have a defined gamma function that I can effectively reverse it from the pixel data without losing too much information? or is there a better way to capture video-ish speed images (15-30fps) from the camera sensor that skips processing like this? Many thanks for any suggestions.

I'm working on an application that uses the iPhone camera for scientific purposes - and, as a result would like to receive sensor data in as unprocessed format as possible. I'm using AVCapturePhotoOutput to take Bayer RAW stills and receiving data in kCVPixelFormatType_14Bayer_RGGB format. However, I'm puzzled as to the content of the bits. I simply demosaic the image by taking each 2x2 square: RG GB and use R, (G+G)/2, B to get 16-bit RGB values - and this indeed works. However, I am puzzled as to the values we are getting as they seem to be approximately in the range 2048 - 16383. The top value is understandable - the maximum that you can fit in 14-bits (as implied by the pixel format type). However we don't seem to be able to get lower than ~2048 no matter how black/dark we make the sensor. I'm aware that the sensor is probably not 14-bits (we're using the iPhone 16e camera) and that maybe this is to do with the way the sensor data is packaged. The Advances in iOS Photography video (https://developer.apple.com/videos/play/wwdc2016/501/) describes it as "10-bit sensor RAW packaged in 14 bits per pixel instead of eight." Is there any documentation describing what is going on here? It's vital for our use that we get as close to the raw camera sensor light readings as possible, so any pointers as to the mapping (e.g. decompanding?) being used would be extremely useful. Many thanks in advance for your help.