I’m currently experiencing a concerning battery issue on my MacBook Pro and wanted to share it here in case others are facing something similar or if it’s possibly tied to a software-level behavior. Device & Software Info: • MacBook Pro 14” (2023) • macOS 26.0(25A5316i) • Battery Cycle Count: 307 • Battery Health: 91% (as of today) • Condition: Normal Issue: • Battery health has dropped from 96% to 91% in less than a week. • For the last week each day, the maximum capacity seems to decline by 1%, even when usage is light and the Mac is plugged in most of the time with Battery Health Management enabled. • When the battery drops below 10%, it drains extremely fast — the percentage decreases nearly second by second, which doesn’t feel normal.

Dear Apple Developer / MFi Program Support, I am exploring technical possibilities for screen sharing and remote interaction between iOS devices and external hardware (e.g., embedded systems, in-vehicle systems) for a prototype we are currently developing. I have reviewed the public iOS developer documentation, but I would appreciate your guidance and clarification on the following advanced use cases, particularly in the context of MFi or enterprise-level integrations: Full-Screen Sharing of iOS Device Is it possible to mirror or stream the entire iOS screen, even when the app is running in the background or not in the foreground? Does ReplayKit or any other framework under the MFi or enterprise entitlements allow full-device screen capture outside the app context? Remote Touch Injection and Control Is there any officially supported mechanism, under MFi or otherwise, that allows external systems to remotely control an iOS device’s touch interface (e.g., simulate gestures, taps, swipes)? Are any of the following permitted under special entitlements: Access to IOHIDEventSystem or similar private APIs for input injection? Communication over USB or network to relay control commands that simulate direct user interaction? Hardware-Level Integration and Entitlements Does the MFi Program allow: Use of private frameworks or entitlements to build low-level integrations for iOS device control or mirroring? Communication over USB/Lightning/USB-C to enable bi-directional interaction (streaming out, commands in)? What are the specific APIs or entitlements available under MFi that enable these use cases? Can you provide references to documentation, SDKs, or prerequisites for companies seeking such capabilities? Eligibility and Certification Process What are the criteria to be approved for the MFi program with access to such advanced capabilities? Can PoC or early-stage research prototypes be eligible, or is MFi access restricted to commercial production intent? How long does it typically take to gain access to these entitlements (assuming NDA and certification requirements are met)? Alternative Pathways If MFi access is not feasible in the short term, is there any Apple-supported alternative path (e.g., test device provisioning, enterprise signing, custom profiles) that permits more advanced capabilities for prototyping purposes? We are not looking to publish this as a general App Store app at this stage, but rather to demonstrate feasibility as part of an innovation prototype that may lead to further OEM-level engagement in the future. Thank you for your support and guidance. Best regards,

On the iPad Pro 12.9-inch (3rd generation) cellular model, when you touch the screen with four fingers and then move your fingers, the touch is no longer detected. The same operation with one to three fingers works normally. This phenomenon does not occur when accessibility is turned on. Is this a beta-specific issue that will be fixed in the official release?

We are develop an application with corebluetooth framework. we connect to device with ble. and open two l2cap channels. it can transfer data with stream. but when it close the second l2cap channel, it always close the first l2cap channel.

My MacBook speakers have started crackling on every sound since macOS 26 Beta 1, the problem is still the same on Beta 9. Happens especially when Simulator is opened.

According to Accessory Design Guidelines iPadOS support HID trackpad. Is there a design example of such supported devices? I have tried to adapt device software to guidelines without any result on iPad.

Hello, The Apple Pencil Pro brought with it the UICanvasFeedbackGenerator API, which lets us trigger haptic feedback on discrete events initiated by the pencil. That works fine. My question then: is it possible / are we "allowed" to trigger haptic feedback on events that weren't initiated by the pencil? For example, say the user is using a left hand finger to drag a slider, while holding the pencil in their right hand-- would it be possible to make the pencil vibrate to indicate the dragged slider knob reached a certain point? Or is the rule that vibration is only possible/allowed when the pencil itself generated a touch? Thanks!

I have some logic which requires NFC support on the device. This is what I'm using to make sure that it's available: isNFCMissing = !NFCNDEFReaderSession.readingAvailable && !NFCTagReaderSession.readingAvailable && !NFCVASReaderSession.readingAvailable Is it possible for isNFCMissing to be true even if the device has an NFC chip. The minimum iOS version for the application is 16 which is only supported on devices with an NFC chip to begin with.

Recently, I've noticed that background Bluetooth scanning stops when I move an app to the background on an iPhone 17 device with Bluetooth 6. I'm curious about a solution. Background Bluetooth scanning doesn't stop on devices older than iOS 26, or on devices that were updated from an iPhone 17 or earlier to iOS 26.

I have a small furnace that heats a sample of my product, a cylinder measuring 20mm x 100mm. As it is heated, there is thermal expansion, and I at this moment read (using my eyes) a micrometer dial gauge and type into my app the value read in hundredths of a millimeter. My source code uses quartz to draw a PDF graph that represents this thermal expansion. I would like to enhance my set up by getting my app to collect the linear displacement from my dilatometer furnace. One possibility I have been trying to implement is to have my app collect DC millivolts from an instrument, like a voltmeter reading the output of an LVDT (Linear Variable Differential Transformer), but the model I have requires MODBUS-RTU protocol, which is not well implemented by Mac OS X developers. It requires an USB-Serial converter, which complicates things and makes it more unreliable. At this moment, I have to sit next to my furnace and type into my app the temperature and linear displacement for 3 hours. I would like to read some comments and suggestions from you or an Apple Engineer and how this could be achieved. Here is a video of my dilatometer furnace: https://www.correiofacil.com/video/IMG_8888.MOV Here is a PDF I generated using my APP: https://www.correiofacil.com/PDF/117.pdf Here is a video showing how I type data manually into my app: https://www.correiofacil.com/video/recording2.mov Here is a video that shows my app drawing a graph: https://www.correiofacil.com/video/recording1.mov These 2 images show my attempts to use the app ModBusRtuMaster to collect data from the voltmeter which at this moment fails: https://www.correiofacil.com/PDF/8f9be971dee32a58c36b307dbab3dc2d.png https://www.correiofacil.com/PDF/4ac20c2ea762fd42ed340a7a2b567900.png You will notice that although the instrument is displaying 0.000 volts, the data collected changes at each message I send to the instrument, proving me that Modbus RTU set up is not working. Here is a link to the manual of the DC voltmeter I am using: https://www.correiofacil.com/PDF/manual1.pdf Here is an image of the LVDT I am trying to use: https://www.correiofacil.com/PDF/e0349986512f9273b26b209baa3ba5c7.png Here is the manual for the LVDT: https://www.correiofacil.com/PDF/GGD19.pdf I suspect that there could be a completely different approach to collecting the data and inputting into my app, maybe Bluetooth? Maybe using a Mitutoyo gauge such as? This: https://www.mitutoyo.com/Images/CatalogUS-1003/resources/_pdfs_/US-1003_Catalog_251.pdf And a cable with SPC support like this: https://www.gw-style.com/product-p-942977.html I am very grateful for your comments

Hello. Is there a solution to the issue where Core Bluetooth does not run in the background on the iPhone17? https://developer.apple.com/library/archive/documentation/NetworkingInternetWeb/Conceptual/CoreBluetooth_concepts/CoreBluetoothBackgroundProcessingForIOSApps/PerformingTasksWhileYourAppIsInTheBackground.html The bluetooth-central Background Execution Mode When an app that implements the central role includes the UIBackgroundModes key with the bluetooth-central value in its Info.plist file, the Core Bluetooth framework allows your app to run in the background to perform certain Bluetooth-related tasks. While your app is in the background you can still discover and connect to peripherals, and explore and interact with peripheral data. In addition, the system wakes up your app when any of the CBCentralManagerDelegate or CBPeripheralDelegate delegate methods are invoked, allowing your app to handle important central role events, such as when a connection is established or torn down, when a peripheral sends updated characteristic values, and when a central manager’s state changes. Although you can perform many Bluetooth-related tasks while your app is in the background, keep in mind that scanning for peripherals while your app is in the background operates differently than when your app is in the foreground. In particular, when your app is scanning for device while in the background: The CBCentralManagerScanOptionAllowDuplicatesKey scan option key is ignored, and multiple discoveries of an advertising peripheral are coalesced into a single discovery event. If all apps that are scanning for peripherals are in the background, the interval at which your central device scans for advertising packets increases. As a result, it may take longer to discover an advertising peripheral. These changes help minimize radio usage and improve the battery life on your iOS device.

Someone is using all of these tools to hack my phone I have several device and my daughters tabkets and androids are also compromised . Use my home hub / home kit : cloudy it / Xcode / swift ui and siri search . If anyone could help I’d highly appreciate it I have contacted the FBI and have an apt in October b it if someone or anyone could help me debug my phone in the mean time I’d highly appreciate it . Have used my doctors apps and changed iclouds . Used family sharing with my daughter and screen time and have used share across devices . Starting wi try my outlook account that Jeremy Walker had access to . Please help me it’s effects my mental and physical health and quality time with My daughter . Using ethernet and hardware keyboards / voice over and AI . Please assist as this is extremely exhausting help pls

I'm building a React Native call application using the following combination of libraries: https://github.com/react-native-webrtc/react-native-callkeep https://github.com/react-native-webrtc/react-native-webrtc https://github.com/react-native-webrtc/react-native-voip-push-notification When I press the speaker button on the call screen displayed by CallKit and change it to ON, the speaker button display on the call screen reverts back to OFF after a few seconds. However, when the speaker button display reverts to OFF, the actual audio output route does not return to the earpiece - the audio continues to output from the speaker without any change. Could you please advise on what cases might cause the speaker button display to revert, and if there are any potential solutions?

[sysdiagnose_2025.10.01_18-29-27+0800_iPhone-OS_iPhone_23A341] I got sysdiagnose from my app user.He can't pair his bluetooth peripheral. in the sysdiagnose,I found this: device AC:7A:94:85:47:F4 is already paired, with a different irk (old:F5 C9 4F 5A 4E BE D0 20 0A 1F F7 DC 3A 89 E0 3A new 4A 8A 00 4C FF D0 CE 7B 61 13 FA B3 84 F4 65 29 ). Unpair first and then restart pairing. (status=65535) but there is no device in his iphone's SYSTEM BLUETOOTH PREPHERAL LIST. I don't know how to delete the irk info when you can't find it in SYSTEM BLUETOOTH PREPHERAL LIST. PLEASE answer me. THANKS.

When our Bluetooth device is scanned and a connection is initiated through the app on the iPhone 17, the air log shows that the iPhone sends an LL_LENGTH_REQ to execute the Data Length Update Procedure. However, our peripheral does not support the Bluetooth LE Data Length Extension, so it responds with an LL_UNKNOWN_RSP PDU with the UnknownType field set to LL_LENGTH_REQ. After receiving the LL_UNKNOWN_RSP, the iPhone 17 does not proceed with the subsequent Bluetooth LE service discovery process. The connection is maintained until the peripheral actively disconnects. Once the peripheral disconnects and continues broadcasting Bluetooth signals, the iPhone 17 repeatedly tries to connect to the peripheral and executes the aforementioned process, even if the app has been terminated. According to the Bluetooth 4.2 core specification ([Vol. 6] Part B, Section 5.1.9), which can be found here: https://www.bluetooth.com/specifications/specs/core-specification-amended-4-2/, the iPhone should accept the LL_UNKNOWN_RSP and terminate the Data Length Update Procedure after receiving it, proceeding with the subsequent operations using the default minimum parameters. Phenomenon: When the app calls the - (void)connectPeripheral:(CBPeripheral *)peripheral options:(nullable NSDictionary<NSString *, id> *)options method, the connection result callback is never received. After a period of approximately 10 seconds, it fails with a callback, displaying the message: central did fail to connect to peripheral: <TY : 45E4A697-31AE-9B5A-1C38-53D7CA624D8C, Error Domain=CoreBLEErrorDomain Code=400 "(null)">.

Prerequisite: After the MDM APP issues the command, the camera on the phone is no longer visible (unusable). After upgrading to iOS 26.1, the isSourceTypeAvailable: UIImagePickerControlSourceTypeCamera method keeps returning true when the camera is unavailable. The isSourceTypeAvailable: UIImagePickerControlSourceTypeCamera method on iOS 26.0.1 is normal, returning false when the camera is unavailable and true when it is available. Please fix this method to determine If the isSourceTypeAvailable: UIImagePickerControlSourceTypeCamera method cannot determine whether the camera is available, please provide an available judgment method.

Hi everyone, I’m working on a custom camera implementation in iOS using native code. My goal is to capture unprocessed, realistic images directly from the camera — without any filters or post-image processing applied by the system. I’ve implemented RAW image capture using the native camera APIs (AVFoundation) and successfully received .dng files. However, even the RAW outputs don’t look like the real environment — the colors, tone, and exposure still seem processed or corrected in some way. I’ve tried various configurations such as photoSettings.rawPhotoPixelFormatType, experimenting with AVCaptureDevice and AVCapturePhotoOutput settings, and reviewing ProRAW and standard RAW behavior, but I’m still not getting truly unprocessed results that reflect the actual sensor data. Has anyone experienced similar results when capturing RAW images on iOS, or found a way to bypass Apple’s image signal processing (ISP) pipeline for more realistic captures? Any insights or references from Apple’s camera framework behavior would be greatly appreciated. Thank you!

Hi everyone, I submitted an app for review and was met with a rejection for unresolved issues. This was what was asked in the rejection: Provide detailed answers to the following questions: -Does your app interact with any hardware? Would that be referring to the camera/microphone of the device? My app uses haptics when you select an option. I didn't see anything in connect where I needed to specify the use of haptics. Also, does this mean that when the reviewer answers me I have to resubmit as a version 1.1? I'm not sure what I would need to change. This is my first app so I'm not entirely sure on the procedure.

Hi everyone, I am developing a .NET MAUI Mac Catalyst app (sandboxed) that communicates with a custom vendor-specific HID USB device. Within the Catalyst app, I am using a native iOS library (built with Objective-C and IOKit) and calling into it via P/Invoke from C#. The HID communication layer relies on IOHIDManager and IOUSBInterface APIs. The device is correctly detected and opened using IOHIDManager APIs. However, IOHIDDeviceRegisterInputReportCallback never triggers — I don’t receive any input reports. To investigate, I also tried using low-level IOKit USB APIs via P/Invoke from my Catalyst app, calling into a native iOS library. When attempting to open the USB interface using IOUSBInterfaceOpen() or IOUSBInterfaceOpenSeize(), both calls fail with: kIOReturnNotPermitted (0xe00002e2). — indicating an access denied error, even though the device enumerates and opens successfully. Interestingly, when I call IOHIDDeviceSetReport(), it returns status = 0, meaning I can successfully send feature reports to the device. Only input reports (via the InputReportCallback) fail to arrive. I’ve confirmed this is not a device issue — the same hardware and protocol work perfectly under Windows using the HIDSharp library, where both input and output reports function correctly. What I’ve verified •Disabling sandboxing doesn’t change the behavior. •The device uses a vendor-specific usage page (not a standard HID like keyboard/mouse). •Enumeration, open, and SetReport all succeed — only reading input reports fails. •Tried polling queues, in queues Input_Misc element failed to add to the queues. •Tried getting report in a loop but no use.

Im running macOS Tahoe and I have the proper nvram boot-args , however when I try to poke the log stream im not getting any verb information related to the card im using. The audio system im using is AppleHDA.kext from the Beta 1 KDK. I've tried asking AI it doesn't make a difference what it suggests to me..... In the meantime of while im asking for assistance what ill do is go ahead and let it template me a kernel extension that I guess just traffics it to the Log for me and hopefully this isn't filtered out as what I suspect is it saying is happening is is that it actually masks some of the information. Why am I doing this? not For the Linux Driver its so I can see from the Log where it came from as this is what the developer said he did GitHub/davidjo/snd_hda_macbookpro is the kabylake iMac.