iOS | 26.3 specific | Google Map hangs after sharing the location to other app which open the location in new app Device: iPhone 13 Pro Max
iOS Version: iOS 26.3
Google Maps Version: 26.08.2 Steps to Reproduce: Open Google Maps. Select any location Tap Share. Share the location to another app (e.g., navigation app, co - pilot or any third party apps). Return to Google Maps. Expected Result:
Google Maps should continue functioning normally. Actual Result:
Google Maps becomes unresponsive and hangs.

aka MKLocalSearch.Request in Swift. Today my users reported that our address auto-complete functionality was returning strange results. We narrowed the issue down to pointOfInterestFilter being set. Sample code below: MKLocalSearchRequest *request = [[MKLocalSearchRequest alloc] init]; request.region = self.region; request.naturalLanguageQuery = addressString; request.resultTypes = MKLocalSearchResultTypeAddress; request.pointOfInterestFilter = [MKPointOfInterestFilter filterIncludingAllCategories]; That last line is the problem. When I stopped setting request.pointOfInterestFilter the MKLocalSearch started working as it always had. To further hammer home the point, with request.pointOfInterestFilter unset I set resultTypes to MKLocalSearchCompleterResultTypePointOfInterest (aka .pointOfInterest) and the issue returned. It seems Apple made a change on their backend recently such that pointOfInterestFilter now overrides resultTypes.

I use MapKit and MKDirections for driving directions. The error "Directions Not Available" appears when the two points (A and B) are outside mainland China (e.g. Tokyo → Osaka). For routes inside China (e.g. Shanghai → Beijing), the same code works. let req = MKDirections.Request() req.source = MKMapItem(placemark: MKPlacemark(coordinate: origin)) req.destination = MKMapItem(placemark: MKPlacemark(coordinate: destination)) req.transportType = .automobile MKDirections(request: req).calculate { response, error in // Tokyo–Osaka (outside China): "Directions Not Available" // Shanghai–Beijing (inside China): works } Questions: Is MKDirections intended to support only routes within the device’s region (e.g. China)? When A/B are abroad, is "Directions Not Available" expected? Is this documented? For cross-country or overseas routes (e.g. Tokyo–Osaka), what is the recommended approach—third-party routing API + drawing on MapKit? Thanks.

I display the BackgroundLocationIndicator (blue/white bubble in status bar) in all my apps, that use background location service. Up to iOS 18 it allowed the user to tap on the bubble from within any other non fullscreen app and bring the app using the background location service to the foreground. In iOS26 this only works from the home screen. Is this intended behaviour or a bug ? If intended, please provide us with an option to allow the user to keep the pre iOS26 behavour. This was a quite convenient shortcut to jump directly to the locationservice using app.

Hello, I’m planning to use MapKit JS for a production web/mobile application and I’m trying to better understand the quota limits and pricing model. From the documentation, I understand that MapKit JS provides a free daily limit of: 250,000 map views 25,000 service calls per Apple Developer Program membership. However, I’m not clear about what exactly happens if these limits are exceeded. My questions: If my application exceeds 250,000 map views or 25,000 service calls in a day, what happens? Will the API simply start returning errors (for example HTTP 429), or will Apple automatically charge for additional usage? Is there an official pricing model for usage above the free quota, or do we need to contact Apple to request higher limits? Are these limits strict daily hard limits that should never be exceeded in production? I’m trying to design the architecture of my application and would like to understand whether we must strictly stay below these limits or whether scaling beyond them is possible. Thank you.

When iterating over a CMSensorDataList (which conforms to NSFastEnumeration) returned by CoreMotion's CMSensorRecorder's accelerometerData(from:to:) method, we sometimes see the crash below, with the frame above pointing to the close brace of the for loop iterating over the list. 0 CoreMotion 0x000000019fcf01dc CLInternalGetPinnedLocationAuthorizationState + 423316 1 CoreMotion 0x000000019fcf036b CLInternalGetPinnedLocationAuthorizationState + 423715 2 CoreMotion 0x000000019fcf02cb CLInternalGetPinnedLocationAuthorizationState + 423555 3 CoreMotion 0x000000019fbb8553 CLMotionActivity::isStatic() const + 1751823 It has been incredibly difficult to reproduce. We managed to reproduce a similar crash stack twice in a separate app that misused accelerometerData(from:to:) by providing a from and to Date that were more than 12 hours apart and iterating over the returned data, but it only occurred twice in many hours of testing. We hope to know if this could be a bug in Core Motion or it is definitely in our SDK, or if there is any way to fail gracefully in this scenario.

how to tracking location service while user killed app

how to keep BG running while user killed app, because admin want to tracking inside/outside of employee

Hello everyone, a few months ago I started building an app using flutter, and a few days ago when I told one of my friends to test it trough Test Flight he asked me why it shows an 🟡 Yellow Circle in front of the app name ? is there an Apple documentation regarding this yellow circle so I can point others to that page ? I googled to find out about this behaviour and it says that my app uses the microphone, but I do not have any code, any library that is using the microphone, it is an Outdoor/GPS Recording app. Thank you.

I am using Significant Location Change (SLC) monitoring to relaunch my app after it has been terminated. I have implemented SLC in two separate apps installed on the same device, and I would like to understand how the system delivers SLC events in this scenario. Specifically: Will both apps receive the SLC event at the same time, or can there be differences in the timing of delivery? If there are differences, what factors influence when each app receives the event? What criteria or system conditions determine how and when SLC events are delivered to different apps on the same device? Any clarification on the event delivery behavior would be greatly appreciated.

Recently, we have received continuous feedback from users that the Bluetooth key and digital key are not working properly or are not functioning; Through analysis of App logs, it was found that after the iOS system locks the screen, the iBeacon background keep-alive function fails, Bluetooth connection also fails, and system callbacks cannot be obtained; the digital key also fails, and it fails simultaneously with the Bluetooth key; We have checked the specific permission configuration and it aligns with the recommended configuration in the official documentation, with no abnormalities. Although this type of issue is not a widespread problem, it has been continuously reported by users and is very troublesome. Does the official team have a clear explanation? Why are both Bluetooth keys and digital keys affected after the app is locked? Digital keys should be less affected. The following is a log analysis of a certain user 1: Step 2, the App entered the background; Step 3, the App's Bluetooth was disconnected; 3-4 The App remained in the background for 5 hours before being launched again 2: This type of issue is due to the system disconnecting the Bluetooth connection when the app enters the background; most likely, the app has been killed by the system when the user gets out of the car, and it has not been revived; the car key also does not work; During the time period from 2026-03-23T17:59:33 to 2026-03-23T21:23:49, why didn't carkey work properly 1：2026-03-23T16:52:11.676+08:00 new_carkey: key:, rssi:-89, AUTH_OK 2：2026-03-23T17:55:51.782+08:00 new_carkey: AppMonitor appDidEnterBackground bleStatus: success(Nimbus.NIOCarBLEKey.State.connected) 3：2026-03-23T17:59:33.747+08:00 new_carkey: ibeacon: didExitRegion, vid: NIO BLE Key, uuid: *** bleStatus: failure(Error Domain=CBErrorDomain Code=15 ""Failed to encrypt the connection, the connection has timed out unexpectedly."" UserInfo={key_device_name=NIO Key 0201 , NSLocalizedDescription=Failed to encrypt the connection, the connection has timed out unexpectedly., vehicle_id=}) " 4：2026-03-23T21:23:49.920+08:00 new_carkey: AppMonitor appDidFinishLaunching: [:] bleStatus: success(Nimbus.NIOCarBLEKey.State.disconnected) 5：2026-03-23T22:01:51.235+08:00 new_carkey: key:****, rssi:-90, AUTH_OK

Hello, I am trying to gather information on the global availability of the Apple Find My Network. Specifically, I would like to know: Which countries currently support this feature? Is it available worldwide, with only a few specific countries/regions facing usage restrictions or complete unavailability? I have already reviewed the public Feature Availability page, but was unable to find any documentation addressing regional restrictions. Any clarification or pointers to relevant documentation would be greatly appreciated. Thank you!

Hello, I am currently working with the Nearby Interaction framework on iOS and exploring the capabilities of UWB-based communication. I would like to ask whether Nearby Interaction supports multicast communication over UWB. Specifically, is it possible for one device to interact simultaneously with multiple peer devices using UWB (e.g., broadcasting ranging or spatial information to multiple devices at once), or is the framework strictly limited to one-to-one peer interactions? If multicast is not supported, are there any recommended approaches or best practices for achieving similar functionality using the current APIs? Thank you for your help. Best regards,

Hello, I have a question similar to this post regarding MapKit JS quota limits. I understand that we can request rate limit increases, but it is not a guaranteed increase. My app is rapidly growing. What if Apple decides to not award the limit increase? Then, the directions service of my app will stop working, which would be catastrophic for my company. I need to know if the rate limit increases are guaranteed. I need to decide early on whether to use MapKit JS or another service on, because the more time that passes, the more entangled my code will get with MapKit JS. Can we get some more information on this?