O aplicativo do PAGBANK e do IFOOD PAGO não funcionam com a versão do IOS26. Está me causando muitos contra tempos… O que devo fazer!?

I’ve updated to iOS 26 Beta 1, and now I can’t revert to an earlier version because my iPhone automatically created a backup using the iOS 26 version. I’m also unable to check for updates—my device can’t retrieve information from the server, so it’s not detecting that Beta 2 is available. I need help resolving this issue, please.

My app works perfectly the first time it is used but when returning to the start after playing the game and playing another it does some random things. I figure it is because the app still retains the previous game in it’s memory allocation? My question is, what is the best way programmatically to have an app start fresh and not have to quit it and open it again?

Good day. Friends, please help. I installed iOS 26 Betta version. During the update, there was a power surge and the Internet went out. The download was difficult but it went through. Now I can't check for updates. Write connection error and checking for updates. I can't roll back to 18.5. It gives an error through the computer. Please help. Thank you in advance.

Dear Apple Support Team, I am writing to request clarification regarding paid service eligibility for my iPhone 14 Pro outside its original country of purchase. Here are the details of my device: Model: iPhone 14 Pro Serial Number: J346337TKY Purchase Date: December 2022 Current Location: Astana, Kazakhstan Warranty Status: Expired I recently visited an Apple Authorized Service Provider in Kazakhstan, and I was informed that my device could not be accepted for repair due to regional restrictions, even on a paid basis. I would appreciate your assistance in confirming whether my device qualifies for paid repair service in Kazakhstan, or if it is strictly limited to service in its country of origin. If not eligible, could you please advise on the nearest country or region where I can receive authorized service? Looking forward to your guidance on the next steps. Best regards, Ruslan D

I launched Amazon Prime and bricked my IPad all reset options have failed, any one have some thought?

I'm trying to make my own MDM server and I'm having trouble allowing nginx to proxy the connection. The web app I'm making can accept http requests so I require nginx. I'm using a certificate from letsencrypt. Every time I try to enroll a phone it instantly rejects at nginx. I have tried multiple cipher options in nginx. I found the following link and my cert supports all except the DHE ones but they say you only need 1. (https://developer.apple.com/forums/thread/128482?answerId=404052022#404052022) What else can I do? 2025/05/21 14:39:44 [info] 105709#105709: *2887 peer closed connection in SSL handshake while SSL handshaking, client: 27.32.155.108, server: 0.0.0.0:9234 2025/05/21 14:41:42 [info] 106014#106014: *2891 peer closed connection in SSL handshake while SSL handshaking, client: 27.32.155.108, server: 0.0.0.0:9234 2025/05/21 14:42:32 [info] 106134#106134: *89 peer closed connection in SSL handshake while SSL handshaking, client: 27.32.155.108, server: 0.0.0.0:9234 2025/05/21 15:09:13 [info] 106132#106132: *124 client timed out (110: Connection timed out) while waiting for request, client: 172.40.1.61, server: 0.0.0.0:9234 below from ssllabs.com upstream backendmdmios { server 172.40.1.61:6744; } server { listen 9234 ssl; http2 on; server_name mdm.domainplaceholder.com; error_log /etc/nginx/logs/ios.com.error.log debug; # error; ssl_certificate /etc/letsencrypt/live/mdm.domainplaceholder.com/fullchain.pem; ssl_certificate_key /etc/letsencrypt/live/mdm.domainplaceholder.com/privkey.pem; ssl_protocols TLSv1.2 TLSv1.3; #ssl_ciphers ECDHE-RSA-AES128-GCM-SHA256:ECDHE-RSA-AES256-GCM-SHA384; ssl_ciphers ECDHE-RSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-CBC-SHA256:ECDHE-RSA-AES128-CBC-SHA:ECDHE-RSA-AES256-GCM-SHA384; #ssl_ciphers TLS_AES_128_GCM_SHA256:TLS_AES_256_GCM_SHA384:TLS_CHACHA20_POLY1305_SHA256:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-ECDSA-CHACHA20-POLY1305; #ssl_protocols TLSv1 TLSv1.1 TLSv1.2; #ssl_ciphers EECDH+AESGCM:EDH+AESGCM:AES256+EECDH:AES256+EDH:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES128-GCM-SHA256:ECDHE-RSA-AES256-SHA384:ECDHE-RSA-AES128-SHA256:ECDHE-RSA-AES256-SHA:ECDHE-RSA-AES128-SHA:DHE-RSA-AES256-SHA256:DHE-RSA-AES128-SHA256:DHE-RSA-AES256-SHA:DHE-RSA-AES128-SHA:AES256-GCM-SHA384:AES128-GCM-SHA256:AES256-SHA256:AES128-SHA256:AES256-SHA:AES128-SHA:HIGH:!aNULL:!eNULL:!EXPORT:!DES:!MD5:!PSK:!RC4:!3DES:!CAMELLIA; ssl_prefer_server_ciphers on; ssl_dhparam /etc/nginx/dhparams.pem; location / { proxy_set_header Host $host; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_pass http://backendmdmios$request_uri; } }

Maybe a bit of a simplistic question, but…. Best ways to create music - programmatically - within an app? I have a few small, simple games that I would like to add some background music to. I’ve fiddled with AVAudio, SKAudio, and now AudioKit. I’m just not quite finding the holy grail of music generation. I don’t know if it’s more technique or tool. So I thought I’d hit up the pool of minds here for some suggestions…?

I recent installed IOS 26, with my iphone 15 as a machine. I am experiencing glitch on switching apps, switching users in a specific apps. Delay is also visible when unlocking the phone, typing, touching the screen, going back to the previous app (clicking the arrow button on the top left). When using a two fingers navigating the phone, the other finger is unrecognizable when clicking on to something. Overall, UI were elegant and amazing. Please fix the responsiveness and may consider lower versions of iphone when possible.

I have an idea for an app for awhile (5+ years) and it took awhile (a year or more to figure out how to develop on - I know C/C++/FORTRAN, started in the punch card era). I ended up using the MacBook I had, some books and chatGPT and plunged into development. BTW this was all happening while I'm retired, included moving to FL from MD. There are times where development stops for months at a time, I've started and stopped at least four or five times on different portions of the project. I've realized that I can actually skip the user interface until the end if ever. At the beginning of code development, I did little more that "Hello world" programs to get my feet wet. Golf, pickleball, doctor appointments, etc. interrupts development. When I get back to it, my code has "disappeared", I open Xcode, open the project and I don't see any of my code - where did it go? I did find the code using the Finder in Directory/projname/projname/ContentView.swift (I'm not sure why projname is duplicated, no doubt my ignorance!) - so the code is still present, somewhere!

So recently, last week, ive updated to the Dev Beta of ios 26. This began the very issue of my cellular data. I woke up to a warning symbol where my cellular bars should be, telling me there was something wrong with my antenna or carrier when in reality there was no problem with any of those problems and took up about 53% of my storage. This is absolutely insane and unacceptable.

I have been working on telecommunication testing of ALE Softwar. Since no invite email received, I can’t unable to test in my IPhone. there is no options to add my test app. this that app url https://apps.apple.com/in/app/ale-softphone/id1588713865

Hi, After installing Macos 26 Beta on my Mac Mini M1 it doesn't boot. On the front panel there is an orange blinking light. The monitor doesn't recognize it. In DFU mode my other Mac Mini (M4) recognizes it but I can't restore it from Configurator (see print). Thanks for your help.

Connect the Zigbee color temperature light bridge to the Home app through the Matter Bridge (a device with a screen), and adjust the color temperature of the light on the screen. However, the color temperature of the corresponding device on the Home app is not synchronized, as shown in the following figure What information is missing from the Home app when my device reports color temperature during control?

what else can you do with it except for getting the alarm run off? and the alarm even gets dismissed when the user presses any buttons on device even volume buttons. I hope it's better by the time when iOS26 is officially released but I can't prepare for the new iOS update with this useless new framework. does anybody know what new features in this framework are coming up?

After the update of the Xcode to latest version, I’m getting “No Such Module Unity Framework” as error. the complete information is below. I had to update the Xcode and the O.S as per the Apple Requirement from my older version of 14.x to latest 16.3. I had no issued running the Unity within my iOS App till the recent update. Previous Setup: Unity was successfully integrated into this iOS app and running fine before the update. As it was working till the Xcode version 14.3, i have not changed any code relevant to Unity. What I’ve Tried: a. Added UnityFramework.framework to “Link Binary with Libraries” and marked it as “Embed & Sign”. b. Verified Framework Search Paths include $(PROJECT_DIR)/UnityProject/build/Debug-iphoneos c. Cleaned build folder, deleted Derived Data d. Checked [CP] Embed Pods Frameworks step in Build Phases Stuck On: Xcode still throws "No such module 'UnityFramework'" — it’s as if the framework isn’t being built or seen from my main project. Request for Help: Has anyone encountered this issue post-Xcode 16.3 update from 14.x. I’d really appreciate any guidance, updated workflows, or even a checklist of steps for properly integrating Unity into an existing iOS app with the new Xcode build system.

Since a recent macOS update (around one month ago), I’ve been experiencing a random issue on my MacBook Air (2023, M2). After the device enters sleep mode and I try to wake it, sometimes the screen stays black with only the cursor visible. The issue occurs randomly — not every time — but frequently enough to impact daily use. The system becomes completely unresponsive, and the only recovery method is a forced restart (holding the power button). Steps to Reproduce: 1. Leave the MacBook idle until it enters sleep automatically. 2. Wait for 10–30+ minutes. 3. Attempt to wake it using the keyboard, trackpad, or by opening the lid. 4. Randomly, the system fails to wake properly: screen turns on, shows a black background with a movable cursor, but nothing else appears. Expected Result: The system wakes normally and restores to the previous desktop session. Actual Result: The system randomly freezes on a black screen with a visible cursor. No user interface or login prompt appears. Requires a hard restart. System Information: • Device: MacBook Air 13”, M2, 2023 • macOS Version: [Insert exact version, e.g., macOS Sonoma 14.5] • Issue Since: Around one month ago (possibly after latest macOS update) • Peripherals: [Mention any external devices if applicable] • Reproducibility: Random (approximately 30–50% of the time after longer sleep) Additional Notes: • Issue is not consistent; sometimes the system wakes as expected. • Occurs regardless of whether on battery or plugged in. • No external monitors or USB accessories are connected when this happens.

Issue with SwiftData: “no such table: ZAPPSETTINGS” and SQLite I/O error on app launch Hello, I’m encountering persistent errors with SwiftData in my SwiftUI app related to Core Data’s underlying SQLite database. Despite defining my models correctly, the app fails to initialize the persistent store, throwing the following error on startup: CoreData error: SQLCore dispatchRequest: no such table: ZAPPSETTINGS. I/O error opening database at /.../default.store. SQLite error code:1, NSSQLiteErrorDomain=1. File “default.store” couldn’t be opened. Context The error only appears concerning my AppSettings model. I have another model, LocationPoint, which appears correctly defined and used. I have tried deleting the app, resetting the device, and cleaning builds but the error persists. The error message suggests the database file is present but the table for ZAPPSETTINGS (the Core Data table for AppSettings) does not exist. Code Samples Main App Entry import SwiftData import SwiftUI @main struct Krow3_0App: App { @State private var userLocationManager = UserLocationManager() @State private var geocodingViewModel = GeocodingViewModel() @State private var locationSearchViewModel = LocationSearchViewModel() @State private var router = Router() var body: some Scene { WindowGroup { LaunchView() .environment(userLocationManager) .environment(geocodingViewModel) .environment(locationSearchViewModel) .environment(router) .modelContainer(for: [LocationPoint.self, AppSettings.self]) } } } AppSettings Model import Foundation import SwiftData @Model class AppSettings { var isMetric: Bool init(isMetric: Bool = false) { self.isMetric = isMetric } } What I’ve Tried Fully uninstalling and reinstalling the app on device and simulator. Resetting the simulator/device. Cleaning the Xcode build folder. Verifying the schema logs which correctly list both LocationPoint and AppSettings. Changing model names to avoid potential conflicts. Adding .modelContainer configuration with autosave enabled. Questions Is there a known bug or limitation with SwiftData concerning certain model setups or naming? Could this be related to how the data container initializes or migrates schemas? Are there recommended debugging or migration steps to resolve “no such table” SQLite errors with SwiftData? How can I safely reset or migrate the persistent store without corrupting the database? Any insights or suggestions would be greatly appreciated! Thank you!

There is no option in the contacts through the phone selection to search contacts. You have to go into the actual contacts app to do that now

Hi guys, good afternoon, I just updated to mac os tahoe and it works great on the mac, but at the moment the wifi and bluetooth connection are not working. I would like to ask for a little support, I have not installed little snitch.app or anything, it is a mac book pro, I hope you can help me, greetings!