Hey everyone, I'm encountering an issue with audio sample rate conversion that I'm hoping someone can help with. Here's the breakdown: Issue Description: I've installed a tap on an input device to convert audio to an optimal sample rate. There's a converter node added on top of this setup. The problem arises when joining Zoom or FaceTime calls—the converter gets deallocated from memory, causing the program to crash. Symptoms: The converter node is being deallocated during video calls. The program crashes entirely when this happens. Traditional methods of monitoring sample rate changes (tracking nominal or actual sample rates) aren't working as expected. The Big Challenge: I can't figure out how to properly monitor sample rate changes. Listeners set up to track these changes don't trigger when the device joins a Zoom or FaceTime call. Please, if anyone has experience with this or knows a solution, I'd really appreciate your help. Thanks in advance! ⁠

When multiple identical songs are added to a playlist, Playlist.Entry.id uses a suffix-based identifier (e.g. songID_0, songID_1, etc.). Removing one entry causes others to shift, changing their .id values. This leads to diffing errors and collection view crashes in SwiftUI or UIKit when entries are updated. Steps to Reproduce: Add the same song to a playlist multiple times. Observe .id.rawValue of entries (e.g. i.SONGID_0, i.SONGID_1). Remove one entry. Fetch playlist again — note the other IDs have shifted. FB18879062

Environment→ ・Device: iPad 10th generation ・OS：**iOS18.3.2 I'm using AVAudioSession to record sound in my application. But I recently came to realize that when the app starts a recording session on a tablet, OS automatically sets the tablet volume to 50% and when after recording ends, it doesn't change back to the previous volume level before starting the recording. So I would like to know whether this is an OS default behavior or a bug? If it's a default behavior, I much appreciate if I can get a link to the documentation.

I'm streaming mp3 audio data using URLSession/AudioFileStream/AVAudioConverter and getting occasional silent buffers and glitches (little bleeps and whoops as opposed to clicks). The issues are present in an offline test, so this isn't an issue of underruns. Doing some buffering on the input coming from the URLSession (URLSessionDataTask) reduces the glitches/silent buffers to rather infrequent, but they do still happen occasionally. var bufferedData = Data() func parseBytes(data: Data) { bufferedData.append(data) // XXX: this buffering reduces glitching // to rather infrequent. But why? if bufferedData.count > 32768 { bufferedData.withUnsafeBytes { (bytes: UnsafeRawBufferPointer) in guard let baseAddress = bytes.baseAddress else { return } let result = AudioFileStreamParseBytes(audioStream!, UInt32(bufferedData.count), baseAddress, []) if result != noErr { print("❌ error parsing stream: \(result)") } } bufferedData = Data() } } No errors are returned by AudioFileStream or AVAudioConverter. func handlePackets(data: Data, packetDescriptions: [AudioStreamPacketDescription]) { guard let audioConverter else { return } var maxPacketSize: UInt32 = 0 for packetDescription in packetDescriptions { maxPacketSize = max(maxPacketSize, packetDescription.mDataByteSize) if packetDescription.mDataByteSize == 0 { print("EMPTY PACKET") } if Int(packetDescription.mStartOffset) + Int(packetDescription.mDataByteSize) > data.count { print("❌ Invalid packet: offset \(packetDescription.mStartOffset) + size \(packetDescription.mDataByteSize) > data.count \(data.count)") } } let bufferIn = AVAudioCompressedBuffer(format: inFormat!, packetCapacity: AVAudioPacketCount(packetDescriptions.count), maximumPacketSize: Int(maxPacketSize)) bufferIn.byteLength = UInt32(data.count) for i in 0 ..< Int(packetDescriptions.count) { bufferIn.packetDescriptions![i] = packetDescriptions[i] } bufferIn.packetCount = AVAudioPacketCount(packetDescriptions.count) _ = data.withUnsafeBytes { ptr in memcpy(bufferIn.data, ptr.baseAddress, data.count) } if verbose { print("handlePackets: \(data.count) bytes") } // Setup input provider closure var inputProvided = false let inputBlock: AVAudioConverterInputBlock = { packetCount, statusPtr in if !inputProvided { inputProvided = true statusPtr.pointee = .haveData return bufferIn } else { statusPtr.pointee = .noDataNow return nil } } // Loop until converter runs dry or is done while true { let bufferOut = AVAudioPCMBuffer(pcmFormat: outFormat, frameCapacity: 4096)! bufferOut.frameLength = 0 var error: NSError? let status = audioConverter.convert(to: bufferOut, error: &error, withInputFrom: inputBlock) switch status { case .haveData: if verbose { print("✅ convert returned haveData: \(bufferOut.frameLength) frames") } if bufferOut.frameLength > 0 { if bufferOut.isSilent { print("(haveData) SILENT BUFFER at frame \(totalFrames), pending: \(pendingFrames), inputPackets=\(bufferIn.packetCount), outputFrames=\(bufferOut.frameLength)") } outBuffers.append(bufferOut) totalFrames += Int(bufferOut.frameLength) } case .inputRanDry: if verbose { print("🔁 convert returned inputRanDry: \(bufferOut.frameLength) frames") } if bufferOut.frameLength > 0 { if bufferOut.isSilent { print("(inputRanDry) SILENT BUFFER at frame \(totalFrames), pending: \(pendingFrames), inputPackets=\(bufferIn.packetCount), outputFrames=\(bufferOut.frameLength)") } outBuffers.append(bufferOut) totalFrames += Int(bufferOut.frameLength) } return // wait for next handlePackets case .endOfStream: if verbose { print("✅ convert returned endOfStream") } return case .error: if verbose { print("❌ convert returned error") } if let error = error { print("error converting: \(error.localizedDescription)") } return @unknown default: fatalError() } } }

I bought two "Apple USB-C to Headphone Jack Adapters". Upon closer inspection, they seems to be of different generations: The one with product ID 0x110a on top is working fine. The one with product ID 0x110b has two issues: There is a short but loud click noise on the headphone when I connect it to the iPad. When I play audio using AVAudioPlayer the first half of a second or so is cut off. Here's how I'm playing the audio: audioPlayer = try AVAudioPlayer(contentsOf: url) audioPlayer?.delegate = self audioPlayer?.prepareToPlay() audioPlayer?.play() Is this a known issue? Am I doing something wrong?

I've got a setup using AVAudioEngine with several tone generator nodes, each with a chain of processing nodes, the chains then mixed into the main output. Generator ➡️ Effect ➡️... ➡️ .mainMixerNode ➡️ .outputNode). Generator ➡️ Effect ➡️... ⤴️ ... Generator ➡️ Effect ➡️... ⤴️ The user should be able to mute any chain individually. I've found several potential approaches to muting, but not terribly happy with any of them. Adjust the amplitudes directly in my tone generators. Issue: Consumes CPU even when completely muted. 4 generators adds ~15% cpu, even when all chains are muted. Detach/attach chains that are muted/unmuted. Issue: Causes loud clicking/popping sounds whenever muted/unmuted. Fade mixer output volume while detaching/attaching a chain (just cutting the volume immediately to 0 doesn't get rid of the clicking/popping). Issue: Causes all channels to fade during the transition, so not ideal. The rest of these ideas are variations on making volume control+detatch/attach work for individual chains, since approach #3 worked well. Add an AVAudioMixer to the end of each chain (just for volume control). Issue: Only the mixer on the final chain functions -- the others block all output. Not sure what's going on there. Use matrix mixer (for multi-input volume control). Plus detach/attach to reduce CPU if necessary. Not yet attempted, due to perceived complexity and reports of fragility in order of wiring in. A bunch of effort before I even know if it's going to work. Develop my own fader node to put on the end of each channel. Unlike the tone generator (simple AVSourceNode), developing an effect node seems complex and time consuming. Might not even fix CPU use. I'm not completely averse to the learning curve of either 5 or 6, but would rather get some guidance on best approach before diving in. They both seem likely to take more effort than I'd like for the simple behavior I'm trying to achieve.

I have an AUv3 that passes all validation and can be loaded into Logic Pro without issue. The UI for the plug in can be any aspect ratio but Logic insists on presenting it in a view with a fixed aspect ratio. That is when resizing, both the height and width are resized. I have never managed to work out what it is I need to do specify to Logic to allow the user to resize width or height independently of each other. Can anyone tell me what I need to specify in the AU code that will inform Logic that the view can be resized from any side of the window/panel?

I developed an educational app that implements audio-video communication through RTC, while using WebView to display course materials during classes. However, some users are experiencing an issue where the audio playback from WebView is very quiet. I've checked that the AVAudioSessionCategory is set by RTC to AVAudioSessionCategoryPlayAndRecord, and the AVAudioSessionCategoryOption also includes AVAudioSessionCategoryOptionMixWithOthers. What could be causing the WebView audio to be suppressed, and how can this be resolved?

I've been trying to use AVMIDIControlChangeEvent with a bankSelect message type to change the instrument the sequencer uses on a AVMusicTrack with no luck. I started with the Apple AVAEMixerSample, converting the initial setup/loading and portions dealing with the sequencer to Swift. I got that working and playing the "bluesyRiff" and then modified it to play individual notes. So my createAndSetupSequencer looked like func createAndSetupSequencer() { sequencer = AVAudioSequencer(audioEngine: engine) // guard let midiFileURL = Bundle.main.url(forResource: "bluesyRiff", withExtension: "mid") else { // print (" failed guard trying to get URL for bluesyRiff") // return // } let track = sequencer.createAndAppendTrack() var currTime = 1.0 for i: UInt32 in 0...8 { let newNoteEvent = AVMIDINoteEvent(channel: 0, key: 60+i, velocity: 64, duration: 2.0) track.addEvent(newNoteEvent, at: AVMusicTimeStamp(currTime)) currTime += 2.0 } The notes played, so then I also replaced the gs_instruments sound bank with GeneralUser GS MuseScore v1.442 first by trying guard let soundBankURL = Bundle.main.url(forResource: "GeneralUser GS MuseScore v1.442", withExtension: "sf2") else { return} do { try sampler.loadSoundBankInstrument(at: soundBankURL, program: 0x001C, bankMSB: 0x79, bankLSB: 0x08) } catch{.... } This appears to work, the instrument (8 which is "Funk Guitar") plays. If I change to bankLSB: 0x00 I get the "Palm Muted guitar". So I know that the soundfont has these instruments Stuff goes off the rails when I try to change the instruments in createAndSetupSequencer. Putting let programChange = AVMIDIProgramChangeEvent(channel: 0, programNumber: 0x001C) let bankChange = AVMIDIControlChangeEvent(channel: 0, messageType: AVMIDIControlChangeEvent.MessageType.bankSelect, value: 0x00) track.addEvent(programChange, at: AVMusicTimeStamp(1.0)) track.addEvent(bankChange, at: AVMusicTimeStamp(1.0)) just before my add note loop doesn't produce any change. Loading bankLSB 8 (Funk) in sampler.loadSoundBankInstrument and trying to change with bankSelect 0 (Palm muted) in createAndSetupSequencer results in instrument 8 (Funk) playing not Palm Muted. Loading bankLSB 0 (Palm muted) and trying to change with bankSelect 8 (Funk) doesn't work, 0 (Palm muted) plays I also tried sampler.loadInstrument(at: soundBankURL) and then I always get the first instrument in the sound font file (piano)no matter what values I put in my programChange/bankChange I've also changed the time in the track.addEvent to be 0, 1.0, 3.0 etc to no success The sampler.loadSoundBankInstrument specifies two UInt8 parameters, bankMSB and BankLSB while the AVMIDIControlChangeEvent bankSelect value is UInt32 suggesting it might be some combination of bankMSB and BankLSB. But the documentation makes no mention of what this should look like. I tried various combinations of 0x7908, 0X0879 etc to no avail I will also point out that I am able to successfully execute other control change events For example adding if i == 1 { let portamentoOnEvent = AVMIDIControlChangeEvent(channel: 0, messageType: AVMIDIControlChangeEvent.MessageType.portamento, value: 0xFF) track.addEvent(portamentoOnEvent, at: AVMusicTimeStamp(currTime)) let portamentoRateEvent = AVMIDIControlChangeEvent(channel: 0, messageType: AVMIDIControlChangeEvent.MessageType.portamentoTime, value: 64) track.addEvent(portamentoRateEvent, at: AVMusicTimeStamp(currTime)) } does produce a change in the sound. (As an aside, a definition of what portamento time is, other than "the rate of portamento" would be welcome. is it notes/seconds? freq/minute? beats/hour?) I was able to get the instrument to change in a different program using MusicPlayer and a series of MusicTrackNewMIDIChannelEvent on a track but these operate on a MusicTrack not the AVMusicTrack which the sequencer uses. Has anyone been successful in switching instruments through an AVMIDIControlChangeEvent or have any feedback on how to do this?

Hello, I'm observing an intermittent memory leak being reported in the iOS Simulator when initializing and starting an AVAudioEngine. Even with minimal setup—just attaching a single AVAudioPlayerNode and connecting it to the mainMixerNode—Xcode's memory diagnostics and Instruments sometimes flag a leak. Here is a simplified version of the code I'm using: // This function is called when the user taps a button in the view controller: #import "ViewController.h" @interface ViewController () @end @implementation ViewController - (void)viewDidLoad { [super viewDidLoad]; } - (IBAction)myButtonAction:(id)sender { NSLog(@"Test"); soundCreate(); } @end // media.m static AVAudioEngine *audioEngine = nil; void soundCreate(void) { if (audioEngine != nil) return; [[AVAudioSession sharedInstance] setCategory:AVAudioSessionCategoryAmbient error:nil]; [[AVAudioSession sharedInstance] setActive:YES error:nil]; audioEngine = [[AVAudioEngine alloc] init]; AVAudioPlayerNode* playerNode = [[AVAudioPlayerNode alloc] init]; [audioEngine attachNode:playerNode]; [audioEngine connect:playerNode to:(AVAudioNode *)[audioEngine mainMixerNode] format:nil]; [audioEngine startAndReturnError:nil]; } In the memory leak report, the following call stack is repeated, seemingly in a loop: ListenerMap::InsertEvent(XAudioUnitEvent const&, ListenerBinding*) AudioToolboxCore ListenerMap::AddParameter(AUListener*, void*, XAudioUnitEvent const&) AudioToolboxCore AUListenerAddParameter AudioToolboxCore addOrRemoveParameterListeners(OpaqueAudioComponentInstance*, AUListenerBase*, AUParameterTree*, bool) AudioToolboxCore 0x180178ddf

I’m developing a macOS audio monitoring app using AVAudioEngine, and I’ve run into a critical issue on macOS 26 beta where AVFoundation fails to detect any input devices, and AVAudioEngine.start() throws the familiar error 10877. FB#: FB19024508 Strange Behavior: AVAudioEngine.inputNode shows no channels or input format on bus 0. AVAudioEngine.start() fails with -10877 (AudioUnit connection error). AVCaptureDevice.DiscoverySession returns zero audio devices. Microphone permission is granted (authorized), and the app is properly signed and sandboxed with com.apple.security.device.audio-input. However, CoreAudio HAL does detect all input/output devices: Using AudioObjectGetPropertyDataSize and AudioObjectGetPropertyData with kAudioHardwarePropertyDevices, I can enumerate 14+ devices, including AirPods, USB DACs, and BlackHole. This suggests the lower-level audio stack is functional. I have tried: Resetting CoreAudio with sudo killall coreaudiod Rebuilding and re-signing the app Clearing TCC with tccutil reset Microphone Running on Apple Silicon and testing Rosetta/native detection via sysctl.proc_translated Using a fallback mechanism that logs device info from HAL and rotates logs for submission via Feedback Assistant I have submitted logs and a reproducible test case via Feedback Assitant : FB#: FB19024508]

I'm developing a TTS Audio Unit Extension that needs to write trace/log files to a shared App Group container. While the main app can successfully create and write files to the container, the extension gets sandbox denied errors despite having proper App Group entitlements configured. Setup: Main App (Flutter) and TTS Audio Unit Extension share the same App Group App Group is properly configured in developer portal and entitlements Main app successfully creates and uses files in the container Container structure shows existing directories (config/, dictionary/) with populated files Both targets have App Group capability enabled and entitlements set Current behavior: Extension can access/read the App Group container Extension can see existing directories and files All write attempts are blocked with "sandbox deny(1) file-write-create" errors Code example: const char* createSharedGroupPathWithComponent(const char* groupId, const char* component) { NSString* groupIdStr = [NSString stringWithUTF8String:groupId]; NSString* componentStr = [NSString stringWithUTF8String:component]; NSURL* url = [[NSFileManager defaultManager] containerURLForSecurityApplicationGroupIdentifier:groupIdStr]; NSURL* fullPath = [url URLByAppendingPathComponent:componentStr]; NSError *error = nil; if (![[NSFileManager defaultManager] createDirectoryAtPath:fullPath.path withIntermediateDirectories:YES attributes:nil error:&amp;error]) { NSLog(@"Unable to create directory %@", error.localizedDescription); } return [[fullPath path] UTF8String]; } Error output: Sandbox: simaromur-extension(996) deny(1) file-write-create /private/var/mobile/Containers/Shared/AppGroup/36CAFE9C-BD82-43DD-A962-2B4424E60043/trace Key questions: Are there additional entitlements required for TTS Audio Unit Extensions to write to App Group containers? Is this a known limitation of TTS Audio Unit Extensions? What is the recommended way to handle logging/tracing in TTS Audio Unit Extensions? If writing to App Group containers is not supported, what alternatives are available? Current entitlements: &lt;dict&gt; &lt;key&gt;com.apple.security.application-groups&lt;/key&gt; &lt;array&gt; &lt;string&gt;group.com.&lt;company&gt;.&lt;appname&gt;&lt;/string&gt; &lt;/array&gt; &lt;/dict&gt;

Hello everyone, I am working on an app that allows you to review your own music using Apple Music. Currently I am running into an issue with the skipping forwards and backwards outside of the app. How it should work: When skipping forward or backwards on the lock or home screen of an iPhone, the next or previous song on an album should play and the information should change to reflect that in the app. If you play a song in Apple Music, you can see a Now Playing view in the lock screen. When you skip forward or backwards, it will do either action and it would reflect that when you see a little frequency icon on artwork image of a song. What it's doing: When skipping forward or backwards on the lock or home screen of an iPhone, the next or previous song is reflected outside of the app, but not in the app. When skipping a song outside of the app, it works correctly to head to the next song. But when I return to the app, it is not reflected NOTE: I am not using MusicKit variables such as Track, Album to display the songs. Since I want to grab the songs and review them I need a rating so I created my own that grabs the MusicItemID, name, artist(s), etc. NOTE: I am using ApplicationMusicPlayer.shared Is there a way to get the song to reflect in my app? (If its easier, a simple example of it would be nice. No need to create an entire xprod file)

Since iOS 18, the system setting “Allow Audio Playback” (enabled by default) allows third-party app audio to continue playing while the user is recording video with the Camera app. This has created a problem for the app I’m developing. ➡️ The problem: My app plays continuous audio in both foreground and background states. If the user starts recording video using the iOS Camera app, the app’s audio — still playing in the background — gets captured in the video — obviously an unintended behavior. Yes, the user could stop the app manually before starting the video recording, but that can’t be guaranteed. As a developer, I need a way to stop the app’s audio before the video recording begins. So far, I haven’t found a reliable way to detect when video recording starts if ‘Allow Audio Playback’ is ON. ➡️ What I’ve tried: — AVAudioSession.interruptionNotification → doesn’t fire — devicesChangedEventStream → not triggered I don’t want to request mic permission (app doesn’t use mic). also, disabling the app from playing audio in the background isn’t an option as it is a crucial part of the user experience ➡️ What I need: A reliable, supported way to detect when the Camera app begins video recording, without requiring mic access — so I can stop audio and avoid unintentional overlap with the user’s recordings. Any official guidance, workarounds, or AVFoundation techniques would be greatly appreciated. Thanks.

According to the header file the outputVolume properties supported range is 0.0-1.0: /*! @property outputVolume @abstract The mixer's output volume. @discussion This accesses the mixer's output volume (0.0-1.0, inclusive). @property (nonatomic) float outputVolume; However when setting the volume to 2.0 the audio does indeed play louder. Is the header file out of date and if so, what is the supported range for outputVolume? Thanks

In my app I use AVAssetReaderTrackOutput to extract PCM audio from a user-provided video or audio file and display it as a waveform. Recently a user reported that the waveform is not in sync with his video, and after receiving the video I noticed that the waveform is in fact double as long as the video duration, i.e. it shows the audio in slow-motion, so to speak. Until now I was using CMFormatDescription.audioStreamBasicDescription.mSampleRate which for this particular user video returns 22'050. But in this case it seems that this value is wrong... because the audio file has two audio channels with different sample rates, as returned by CMFormatDescription.audioFormatList.map({ $0.mASBD.mSampleRate }) The first channel has a sample rate of 44'100, the second one 22'050. If I use the first sample rate, the waveform is perfectly in sync with the video. The problem is given by the fact that the ratio between the audio data length and the sample rate multiplied by the audio duration is 8, double the ratio for the first audio file (4). In the code below this ratio is given by Double(length) / (sampleRate * asset.duration.seconds) When commenting out the line with the sampleRate variable definition in the code below and uncommenting the following line, the ratios for both audio files are 4, which is the expected result. I would expect audioStreamBasicDescription to return the correct sample rate, i.e. the one used by AVAssetReaderTrackOutput, which (I think) somehow merges the stereo tracks. The documentation is sparse, and in particular it’s not documented whether the lower or higher sample rate is used; in this case, it seems like the higher one is used, but audioStreamBasicDescription for some reason returns the lower one. Does anybody know why this is the case or how I should extract the sample rate of the produced PCM audio data? Should I always take the higher one? I created FB19620455. let openPanel = NSOpenPanel() openPanel.allowedContentTypes = [.audiovisualContent] openPanel.runModal() let url = openPanel.urls[0] let asset = AVURLAsset(url: url) let assetTrack = asset.tracks(withMediaType: .audio)[0] let assetReader = try! AVAssetReader(asset: asset) let readerOutput = AVAssetReaderTrackOutput(track: assetTrack, outputSettings: [AVFormatIDKey: Int(kAudioFormatLinearPCM), AVLinearPCMBitDepthKey: 16, AVLinearPCMIsBigEndianKey: false, AVLinearPCMIsFloatKey: false, AVLinearPCMIsNonInterleaved: false]) readerOutput.alwaysCopiesSampleData = false assetReader.add(readerOutput) let formatDescriptions = assetTrack.formatDescriptions as! [CMFormatDescription] let sampleRate = formatDescriptions[0].audioStreamBasicDescription!.mSampleRate //let sampleRate = formatDescriptions[0].audioFormatList.map({ $0.mASBD.mSampleRate }).max()! print(formatDescriptions[0].audioStreamBasicDescription!.mSampleRate) print(formatDescriptions[0].audioFormatList.map({ $0.mASBD.mSampleRate })) if !assetReader.startReading() { preconditionFailure() } var length = 0 while assetReader.status == .reading { guard let sampleBuffer = readerOutput.copyNextSampleBuffer(), let blockBuffer = sampleBuffer.dataBuffer else { break } length += blockBuffer.dataLength } print(Double(length) / (sampleRate * asset.duration.seconds))

Hi guys, I am having issue in live-streaming audio from Bluetooth headset and playing it live on the iPhone speaker. I am able to redirect audio back to the headset but this is not what I want. The issue happens when I am trying to override output - the iPhone switches to speaker but also switches a microphone. This is example of the code: import AVFoundation class AudioRecorder { let player: AVAudioPlayerNode let engine:AVAudioEngine let audioSession:AVAudioSession let audioSessionOutput:AVAudioSession init() { self.player = AVAudioPlayerNode() self.engine = AVAudioEngine() self.audioSession = AVAudioSession.sharedInstance() self.audioSessionOutput = AVAudioSession() do { try self.audioSession.setCategory(AVAudioSession.Category.playAndRecord, options: [.defaultToSpeaker]) try self.audioSessionOutput.setCategory(AVAudioSession.Category.playAndRecord, options: [.allowBluetooth]) // enables Bluetooth HFP profile try self.audioSession.setMode(AVAudioSession.Mode.default) try self.audioSession.setActive(true) // try self.audioSession.overrideOutputAudioPort(.speaker) // doens't work } catch { print(error) } let input = self.engine.inputNode self.engine.attach(self.player) let bus = 0 let inputFormat = input.inputFormat(forBus: bus) self.engine.connect(self.player, to: engine.mainMixerNode, format: inputFormat) input.installTap(onBus: bus, bufferSize: 512, format: inputFormat) { (buffer, time) -> Void in self.player.scheduleBuffer(buffer) print(buffer) } } public func start() { try! self.engine.start() self.player.play() } public func stop() { self.player.stop() self.engine.stop() } } I am not sure if this is a bug or not. Can somebody point me into the right direction? I there a way to design a custom audio routing? I would also appreciate some good documentation besides AVFoundation docs.

I'm working on adding CarPlay support to an audio app and am running into an issue. Occasionally, when a user opens the app from CarPlay while the main app scene is either not connected or is currently in the background, I will receive an error when attempting to activate the audio session. The code below mimics my setup: do { try AVAudioSession.sharedInstance().setCategory(.playback, mode: .spokenAudio) try AVAudioSession.sharedInstance().setActive(true) } catch { print(error) // NSOSStatusErrorDomain - 560557684: Session activation failed } That error code maps to AVAudioSession.ErrorCode.cannotInterruptOthers. Once in this state, all subsequent attempts to play different pieces of content will fail. However, things will start working normally if the user opens the app on their phone and tries again from CarPlay (while the app is in the foreground on their phone). I'm not sure why it would behave this way and want to note that I do have the audio background mode capability enabled. Has anyone else encountered this? Are there any workarounds or changes I could make to prevent this from happening?

I am developing an app that uses MusicKit to play music and then I need to have spoken words played to the user, while ducking the audio coming from MusicKit (application music player) the built in Siri voices are not off sufficient quality so I am using an external service to create an mp3 file and then play this back using AVAudioSession Sample code below the problem I am having is that .duckOthers is not ducking the Application Music Player output Is this a bug or am I doing this wrong? // Configure audio session for system-wide ducking try AVAudioSession.sharedInstance().setCategory(.playback, mode: .spokenAudio, options: [.duckOthers, .mixWithOthers]) try AVAudioSession.sharedInstance().setActive(true) // Set the ducking level to maximum try AVAudioSession.sharedInstance().setPreferredIOBufferDuration(0.005) // Create and configure audio player self.audioPlayer = try AVAudioPlayer(data: audioData) self.audioPlayer?.delegate = self self.audioPlayer?.volume = 1.0 // Ensure full volume for speech self.audioPlayer?.prepareToPlay() // Set the audio player's settings for maximum clarity self.audioPlayer?.enableRate = false self.audioPlayer?.pan = 0.0 // Center the audio self.audioPlayer?.play()

A bit of a novice to app development here but I have a paid developer account, I have registered the identifier for MusicKit on the developer website (using the bundle identifier I've selected in Xcode) but the option to add MusicKit as a capability is not available in Xcode? I've manually updated the certificates, closed the app and reopened it, started a new project and tried with a different demo project? Apologies if I am missing something obvious but could someone help me get this capability added?