FaceTime’s screen-share audio balance is insanely absurd right now. Whenever I share media, the system audio that gets sent through FaceTime is a tiny whisper even at full volume (or even when connected to my speaker or headphones). The moment anyone on the call makes any noise at all, the shared audio ducks so hard it disappears, while the voice (or rustling or air conditioning noise) spikes to painful levels. It’s impossible to watch or listen to anything together. Also, the feature where FaceTime would shrink to a square during screen-sharing has been completely removed. That was a good feature and I'm really confused why it's gone. Now, the FaceTime window stays as a long rectangle that covers part of the content I'm trying to share (unless I do full screen tile, but then I can't pull up any other windows during the call) and can't be made smaller than about a third of the screen. You can't resize the window or adjust its dimensions, so it ends up blocking the actual media you're trying to watch. Here are some feature requests/fixes that would greatly improve the FaceTime screen-share experience: Option to adjust the shared media volume independently of call audio. Disable/toggle the extreme automatic audio docking while screen-sharing Reintroduce the minimized “floating square” mode or allow full manual resizing and repositioning of the FaceTime window during screen-share sessions. Overall, this setup makes FaceTime screen-sharing basically unusable. The audio balance is so inconsistent that it’s easier to switch to Zoom or Google Meet, which both handle shared sound correctly and let you move the call window out of the way. Until these issues are fixed, there’s no practical reason to use FaceTime for shared viewing at all.

I developed an educational app that implements audio-video communication through RTC, while using WebView to display course materials during classes. However, some users are experiencing an issue where the audio playback from WebView is very quiet. I've checked that the AVAudioSessionCategory is set by RTC to AVAudioSessionCategoryPlayAndRecord, and the AVAudioSessionCategoryOption also includes AVAudioSessionCategoryOptionMixWithOthers. What could be causing the WebView audio to be suppressed, and how can this be resolved?

Hello, I need to know what is a unique identifier of a MIDI device (source/destination). Important note: I want to get the same ID when a device is reconnected (unplugged and then plugged again). The main candidate is kMIDIPropertyUniqueID property. But I don't know if it meets the requirement above or not. Additional question: is it always available for any endpoint? Also there is kMIDIPropertyDeviceID property. What about it? And one more option is just MIDIEndpointRef returned by MIDIGetSource or MIDIGetDestination. So what is the proper way to get ID which persists between device reconnections?

Hi all, I’ve implemented the new Core Audio Tap API (AudioHardwareCreateProcessTap with CATapDescription) and I’m seeing consistent level attenuation that scales with the number of stereo output pairs exposed by the target device. What I observe Device with 4 stereo pairs (8 outs) → tap shows −12.04 dB relative to source. True 2-ch devices (built-in speakers, AirPods) → ~0 dB attenuation. The attenuation appears regardless of whether I: Create a global (default-output) tap via initStereoGlobalTapButExcludeProcesses: Or create a per-process/per-device tap via initWithProcesses:andDeviceUID:withStream: Additionally, the routing choice inside the sending app matters: App output to “System/Default Output” → I often see no attenuation. App output directly to a multi-out interface (e.g., RME Fireface) → I see the pair-count-scaled attenuation. I can query Core Audio for the number of output channels/pairs and gain-compensate (+20·log10(N_pairs) dB) and that matches my measurements for many cases. However, this compensation is not universally correct because it seems to depend on where each process routes its audio (Default Output vs. direct device), even when those processes are included in the same tap aggregate. Question Is there a supported way to obtain the raw, unattenuated streams for all processes through the Tap API—i.e., to bypass this automatic headroom/attenuation behavior entirely? If this attenuation is expected by design: Is there a documented rule for when it applies (global vs. device taps, per-process taps, stream selection, etc.)? Is there a property/flag to disable it, or a reliable, official method to compute the exact compensation (beyond counting stereo pairs)? Any guidance on ensuring consistent levels when multiple processes route differently (Default Output vs. direct device) but are captured by the same tap? Environment API: AudioHardwareCreateProcessTap + CATapDescription Devices: built-in output (2-ch), RME Fireface (8+ outs / 4+ stereo pairs) Behavior reproducible with both global and per-process/per-device tap descriptions. Attenuation example: 4 stereo pairs → −12.04 dB observed. Happy to provide a minimal sample, measurements, and device logs. Thanks! — David

I'm encountering numerous crashes involving the com.apple.coreaudio.AQClient thread on our application. The crash details are as follows: #10 com.apple.coreaudio.AQClient SIGSEGV SEGV_ACCERR 0 libobjc.A.dylib _objc_msgSend + 44 1 AudioToolbox ClientMessageHandler::PropertyChanged(unsigned int) + 872 2 AudioToolbox ClientAudioQueue::FetchAndDeliverPendingCallbacks(unsigned int) + 924 3 AudioToolbox __XCallbackNotificationsAvailable + 212 4 libAudioToolboxUtility.dylib _mshMIGPerform + 260 5 CoreFoundation ___CFRUNLOOP_IS_CALLING_OUT_TO_A_SOURCE1_PERFORM_FUNCTION__ + 56 6 CoreFoundation ___CFRunLoopDoSource1 + 596 7 CoreFoundation ___CFRunLoopRun + 2392 8 CoreFoundation _CFRunLoopRunSpecific + 572 9 AudioToolbox CADeprecated::GenericRunLoopThread::Entry(void*) + 156 10 libAudioToolboxUtility.dylib CADeprecated::CAPThread::Entry(CADeprecated::CAPThread*) + 88 11 libsystem_pthread.dylib __pthread_start + 116 All these crashes occur on system versions below iOS/iPadOS 17, primarily when the device's available RAM is low. What steps can I take to resolve this issue? Any insights would be greatly appreciated!

Thread 5 Crashed: 0 libobjc.A.dylib 0x19af7b038 objc_msgSend + 56 1 CoreFoundation 0x19dfdb618 cow_cleanup + 135 2 CoreFoundation 0x19dfdb6fc -[__NSDictionaryM dealloc] + 147 3 MediaToolbox 0x1b167636c FigRemotePropertyCacheTeardown + 31 4 MediaToolbox 0x1b1c5b648 remoteXPCAsset_Finalize + 107 5 CoreMedia 0x1b1e9166c FigBaseObjectFinalize + 275 6 CoreFoundation 0x19dfcc5ec _CFRelease + 295 7 AVFCore 0x1b1054d64 -[AVFigAssetTrackInspector dealloc] + 151 8 AVFCore 0x1b0f818d8 -[AVAssetTrack dealloc] + 63 9 CoreFoundation 0x19dfdba28 RELEASE_OBJECTS_IN_THE_ARRAY + 115 10 CoreFoundation 0x19dfdb7e0 -[__NSArrayM dealloc] + 147 11 AVFCore 0x1b0f52e04 -[AVURLAsset dealloc] + 167 12 libobjc.A.dylib 0x19af821f8 object_cxxDestructFromClass(objc_object*, objc_class*) + 115 13 libobjc.A.dylib 0x19af7df20 objc_destructInstance_nonnull_realized(objc_object*) + 75 14 libobjc.A.dylib 0x19af7d4a4 _objc_rootDealloc + 71 15 AVFCore 0x1b0fef988 -[AVAssetReaderOutput dealloc] + 415 16 AVFCore 0x1b0ff11ec -[AVAssetReaderTrackOutput dealloc] + 127 17 CoreFoundation 0x19dfe20a4 -[__NSSingleObjectArrayI dealloc] + 63 18 libobjc.A.dylib 0x19af7d3f8 AutoreleasePoolPage::releaseUntil(objc_object**) + 203

I’m developing a macOS audio monitoring app using AVAudioEngine, and I’ve run into a critical issue on macOS 26 beta where AVFoundation fails to detect any input devices, and AVAudioEngine.start() throws the familiar error 10877. FB#: FB19024508 Strange Behavior: AVAudioEngine.inputNode shows no channels or input format on bus 0. AVAudioEngine.start() fails with -10877 (AudioUnit connection error). AVCaptureDevice.DiscoverySession returns zero audio devices. Microphone permission is granted (authorized), and the app is properly signed and sandboxed with com.apple.security.device.audio-input. However, CoreAudio HAL does detect all input/output devices: Using AudioObjectGetPropertyDataSize and AudioObjectGetPropertyData with kAudioHardwarePropertyDevices, I can enumerate 14+ devices, including AirPods, USB DACs, and BlackHole. This suggests the lower-level audio stack is functional. I have tried: Resetting CoreAudio with sudo killall coreaudiod Rebuilding and re-signing the app Clearing TCC with tccutil reset Microphone Running on Apple Silicon and testing Rosetta/native detection via sysctl.proc_translated Using a fallback mechanism that logs device info from HAL and rotates logs for submission via Feedback Assistant I have submitted logs and a reproducible test case via Feedback Assitant : FB#: FB19024508]

Hello everyone, I've written an audio unit plugin that needs to be aware of any upstream latency caused by heavy plugins before it on the channel. Is there any way to query this? I know that Logic applies PDC at the channel's output (summing point), but I need to know what the accumulated latency is at the point the audio enters my plugin. Thanks!

I’m running the iOS 26.2 Public Beta update and my album artwork is missing from the music app (I’m not using Apple Music). I use google to get my album artwork. Do I need to wait for a new update?

Hi, everyone, I downloaded the source code EditingSpatialAudioWithAnAudioMix.zip from https://developer.apple.com/documentation/Cinematic/editing-spatial-audio-with-an-audio-mix, when I carried out one of the actions named "process" in command line the program crashed!! Form the source code, I found that the value of componentType is set to kAudioUnitType_FormatConverter: // The actual `AudioUnit`. public var auAudioMix = AVAudioUnitEffect() init() { // Generate a component description for the audio unit. let componentDescription = AudioComponentDescription( componentType: kAudioUnitType_FormatConverter, componentSubType: kAudioUnitSubType_AUAudioMix, componentManufacturer: kAudioUnitManufacturer_Apple, componentFlags: 0, componentFlagsMask: 0) auAudioMix=AVAudioUnitEffect(audioComponentDescription: componentDescription) } But in the document from https://developer.apple.com/documentation/avfaudio/avaudiouniteffect/init(audiocomponentdescription:), it seems that componentType can not be set to kAudioUnitType_FormatConverter and : Has everyone encountered this problem?

When multiple identical songs are added to a playlist, Playlist.Entry.id uses a suffix-based identifier (e.g. songID_0, songID_1, etc.). Removing one entry causes others to shift, changing their .id values. This leads to diffing errors and collection view crashes in SwiftUI or UIKit when entries are updated. Steps to Reproduce: Add the same song to a playlist multiple times. Observe .id.rawValue of entries (e.g. i.SONGID_0, i.SONGID_1). Remove one entry. Fetch playlist again — note the other IDs have shifted. FB18879062

I'm working in Swift/SwiftUI, running XCode 16.3 on macOS 15.4 and I've seen this when running in the iOS simulator and in a macOS app run from XCode. I've also seen this behaviour with 3 different audio files. Nothing in the documentation says that the speechRecognitionMetadata property on an SFSpeechRecognitionResult will be nil until isFinal, but that's the behaviour I'm seeing. I've stripped my class down to the following: private var isAuthed = false // I call this in a .task {} in my SwiftUI View public func requestSpeechRecognizerPermission() { SFSpeechRecognizer.requestAuthorization { authStatus in Task { self.isAuthed = authStatus == .authorized } } } public func transcribe(from url: URL) { guard isAuthed else { return } let locale = Locale(identifier: "en-US") let recognizer = SFSpeechRecognizer(locale: locale) let recognitionRequest = SFSpeechURLRecognitionRequest(url: url) // the behaviour occurs whether I set this to true or not, I recently set // it to true to see if it made a difference recognizer?.supportsOnDeviceRecognition = true recognitionRequest.shouldReportPartialResults = true recognitionRequest.addsPunctuation = true recognizer?.recognitionTask(with: recognitionRequest) { (result, error) in guard result != nil else { return } if result!.isFinal { //speechRecognitionMetadata is not nil } else { //speechRecognitionMetadata is nil } } } } Further, and this isn't documented either, the SFTranscriptionSegment values don't have correct timestamp and duration values until isFinal. The values aren't all zero, but they don't align with the timing in the audio and they change to accurate values when isFinal is true. The transcription otherwise "works", in that I get transcription text before isFinal and if I wait for isFinal the segments are correct and speechRecognitionMetadata is filled with values. The context here is I'm trying to generate a transcription that I can then highlight the spoken sections of as audio plays and I'm thinking I must be just trying to use the Speech framework in a way it does not work. I got my concept working if I pre-process the audio (i.e. run it through until isFinal and save the results I need to json), but being able to do even a rougher version of it 'on the fly' - which requires segments to have the right timestamp/duration before isFinal - is perhaps impossible?

【溦N51888M】腾龙公司会员申请流程步骤【罔纸 211239.com 】输入官惘到浏览器打开联系24小时在线业务人员办理上下，打开公司官网. 二、点击主页右上角注册按钮. 三、填写账号信息. 四、输入手机号，验证码，密码. 五、勾选用户协议，完成注册协议，完成注册. 注意：若出现账号已存在」提示，需重新设置唯一账号名称

Hello, I have an existing AUv3 instrument plugin. In the plug in, users can access files (audio files, song projects) via a UIDocumentPickerViewController In Logic Pro, (and some other hosts, but not all), the document picker is unable to receive touches, while a keyboard case is attached to the iPad. Removing the case (this is an Apple brand iPad case) allows the interactions to resume and allows me to pick files in the usual way. One of my users reports this non-responsive behavior occurs even after disconnecting their keyboard. I have fiddled with entitlements all day, and have determined that is not the issue, since the keyboard disconnection appears to fix it every time for me. Here is my, very boilerplate, presentation code : guard let type = UTType("com.my.type") else { return } let fileBrowser = UIDocumentPickerViewController(forOpeningContentTypes: [type]) fileBrowser.overrideUserInterfaceStyle = .dark fileBrowser.delegate = self fileBrowser.directoryURL = myFileFolderURL() self.present(fileBrowser, animated: true) {

Many Apple users own both Bluetooth earphones (AirPods) and traditional wired earphones. While Bluetooth audio provides freedom of movement, some users still prefer wired earphones for comfort, sound profile, or personal preference. However, plugging wired earphones directly into an iPhone can feel restrictive and inconvenient during daily use. This proposal suggests a hybrid audio approach where wired earphones can be connected to a Bluetooth-enabled AirPods charging case (or a similar Apple-designed module), allowing users to enjoy wired earphones without a physical connection to the iPhone. #Problem Statement *Wired earphones offer consistent audio quality and zero latency *Bluetooth earphones provide freedom from cables *Users must currently choose one or the other *Plugging wired earphones into an iPhone limits movement and can feel intrusive in daily scenarios (walking, commuting, working) There is no native Apple solution that allows wired earphones to function wirelessly while maintaining Apple’s audio experience standards. #Proposed Solution Introduce a Wired-to-Wireless Audio Mode through the AirPods charging case or a dedicated Apple Bluetooth audio bridge. How it works: User plugs wired earphones into the AirPods case (or a future AirPods accessory port) The case acts as a Bluetooth audio transmitter Audio is streamed wirelessly from iPhone to the case The case outputs audio to the wired earphones #User experiences: No cable connected to the iPhone Familiar wired earphone sound Freedom of movement similar to Bluetooth earbuds User Experience (UX Flow) Plug wired earphones into the AirPods case iPhone automatically detects: “Wired Earphones via AirPods Case” Seamless pairing using existing AirPods framework Audio controls, volume, and switching handled through iOS No additional apps required #Key Benefits Combines wired sound reliability with wireless convenience Reduces physical cable disturbance during use Extends usefulness of existing wired earphones Minimal learning curve for users Fits naturally into Apple’s ecosystem and design philosophy #Privacy & Performance Considerations On-device audio processing only No cloud involvement Low-latency audio using Apple’s proprietary Bluetooth codecs Power-efficient usage leveraging AirPods case battery #Target Users Users who prefer wired earphones but want wireless freedom Commuters and walkers Developers and professionals who multitask Users sensitive to Bluetooth earbud fit or comfort #Ecosystem Fit Builds on existing AirPods pairing and audio stack Aligns with Apple’s focus on seamless UX Could be implemented via: New AirPods hardware Firmware update + accessory Dedicated Apple audio bridge

Environment→ ・Device: iPad 10th generation ・OS：**iOS18.3.2 We're using AVAudioPlayer to play a sound when a button is tapped. In our use case, this button can be tapped very frequently — roughly every 0.1 to 0.2 seconds. Each tap triggers the following function: var audioPlayer: AVAudioPlayer? func soundPlay(resource: String, type: String){ guard let path = Bundle.main.path(forResource: resource, ofType: type) else { return } do { audioPlayer = try AVAudioPlayer(contentsOf: URL(fileURLWithPath: path)) audioPlayer!.delegate = self try audioSession.setCategory(.playback) } catch { return } self.audioPlayer!.play() } The issue is that under high-frequency tapping (especially around 0.1–0.15s intervals), the app occasionally crashes. The crash does not occur every time, but it happens randomly — sometimes within 30 seconds, within 1 minute, or even 3 minutes of continuous tapping. Interestingly, adding a delay of 0.2 seconds between button taps seems to prevent the crash entirely. Delays shorter than 0.2 seconds (e.g.,0.15s,0.18s) still result in occasional crashes. My questions are: **Is this expected behavior from AVAudioPlayer or AVAudioSession? Could this be a known issue or a limitation in AVFoundation? Is there any documentation or guidance on handling frequent sound playback safely?** Any insights or recommendations on how to handle rapid, repeated audio playback more reliably would be appreciated.

Dear Sirs, I’ve written a virtual audio driver based on AudioDriverKit and running as dext in my MacOS app. Sometimes when waking up from a sleep state the recording side of my driver extension seems to hang and I don’t see any calls to my io_operation callback. Then the recording app like a DAW seems to hang when trying to start a recording. This doesn’t happen after short sleep states or after a complete new start of my MacBook. I already opened a case in Feedback-Assistant on 5th of May (FB17503622) which also includes a sysdiagnose and a ktrace but I didn't get any feedback so far. Meanwhile some of our customers are getting angry and I'd like to know if there's anything I could do to fix this problem on my side. We’re not sure whether this worked in previous MacOS versions, we think we didn’t observe this before 15.3.1 but at least since 15.3.1. we’ve seen this problem. Best regards, Johannes

I have a flutter iOS app that has some simple sound FX for button clicks, swipes, etc. In simulator and on real device the sound works fine, but when i upload the app to testflight (and App store) the sound FX don't play. When I upload the app to my phone via xcode I am using the release profile so I don't see what the difference could be. I have also gone through the archive that i uploaded and verified that the sound files are indeed there. I have other flutter apps that use sound but non since the iOS 26 update. I've tried 3 different flutter sound libraries and all face the same issue. Wondering if anyone else is seeing this issue or if I'm missing a simple permission or something that has changed recently? Thanks in advanced

I bought two "Apple USB-C to Headphone Jack Adapters". Upon closer inspection, they seems to be of different generations: The one with product ID 0x110a on top is working fine. The one with product ID 0x110b has two issues: There is a short but loud click noise on the headphone when I connect it to the iPad. When I play audio using AVAudioPlayer the first half of a second or so is cut off. Here's how I'm playing the audio: audioPlayer = try AVAudioPlayer(contentsOf: url) audioPlayer?.delegate = self audioPlayer?.prepareToPlay() audioPlayer?.play() Is this a known issue? Am I doing something wrong?

I am work an app development on an app which request an audio function in background as an alert sound. during debug testing , the function work fine, but once I testing standalone without debugging , The function not work , it will play out the sound when I back to app. does any way to trace the issues ?