Hi everyone, I’m building a React Native iOS app where I’m integrating Wazo (native WebRTC) and Jitsi (WebView / WebRTC). Use case: Wazo is used to maintain a background call session (mainly signaling + audio keep-alive). Jitsi is used in the foreground for video calls. Problem: When Jitsi starts, it takes control of the microphone and camera. The Wazo call disconnects after ~5 minutes (likely due to media / audio session conflict). Even if Wazo audio/video is muted or tracks are disabled, the session still drops. My questions: Is it officially supported or recommended to run two WebRTC stacks (Wazo + Jitsi) simultaneously on iOS? Can Wazo stay connected without active audio/video tracks while Jitsi uses mic/camera? Is there a way to release Wazo media streams temporarily (but keep signaling alive) while Jitsi is loading or active? Are there any AVAudioSession / background mode limitations on iOS that make this impossible by design? If this is not supported, what is the recommended architecture (single WebRTC pipeline, switching media ownership, etc.)? Environment: iOS (React Native) Wazo SDK (native WebRTC) Jitsi Meet (WebView) CallKit + PushKit enabled Any guidance, documentation, or real-world experience would be greatly appreciated. Thanks in advance 🙏

The crash is specific to iOS 26.2 WKScriptMessageHandler delegate func userContentController(_ userContentController: WKUserContentController, didReceive message: WKScriptMessage) Name attribute is accessible but WKScriptMessage body attribute causes crash The object seems to be not accessible

I'm trying to sync authentication data from my iOS app to a Safari Web Extension using App Groups, but the extension isn't consistently receiving the data. Setup: App Group: group.com.airaai.AiraApp (configured in both app and extension) iOS app writes auth data using UserDefaults(suiteName: "group.com.airaai.AiraApp") Extension's Swift SafariWebExtensionHandler reads from App Groups in beginRequest() Extension's JavaScript reads from browser.storage.local Problem: Extension popup always shows "logged out" even when: User is logged into main iOS app Auth data exists in App Groups (verified via native module logs) Handler successfully writes test values to extension storage Current Behavior: Handler CAN read from App Groups ✅ Handler CAN write test values to extension storage ✅ But auth data doesn't appear in browser.storage.local when popup checks ❌ Popup reads empty keys even though handler logged writing them Code: // Handler reads from App Groups guard let sharedDefaults = UserDefaults(suiteName: "groupName") else { return } let authData = sharedDefaults.string(forKey: "auth_data") // Handler writes to extension storage (tried multiple suite names) let extensionDefaults = UserDefaults(suiteName: Bundle.main.bundleIdentifier ?? "") extensionDefaults?.set(authData, forKey: "oauth_token") extensionDefaults?.synchronize() // Popup reads from storage browser.storage.local.get(['oauth_token']).then(data => { console.log(data); // Always empty {} }); What I've tried: ✅ App Groups properly configured in both targets ✅ Extension has App Groups capability enabled ✅ Multiple UserDefaults suite names (bundle ID, bundle ID + suffix) ✅ Delayed sync attempts in handler ✅ Comprehensive logging Questions: What is the correct UserDefaults suite name for Safari extension storage on iOS? When does beginRequest() get called? Can it be triggered manually? Is App Groups the right approach, or should I use a different pattern? Alternatives I've considered: Deep link/redirect method (app opens Safari with token in URL) Content script intercepts URL and sends to background script Is this a supported approach for iOS Safari extensions? Any guidance or examples would be greatly appreciated!

I’m developing a Safari App Extension and I want to debug the background.js script. However, I can’t find any tool or option to do this. When I run the extension from Xcode using the ProjectName Extension (macOS) scheme, I expect to see a “ProjectName” item under the Develop → Web Extension Background Content menu. But there’s nothing there. Has anyone encountered the same issue? How did you fix it? Environment: Manifest Version: V3 Safari: 26.0.1 (21622.1.22.11.15) Xcode: 26.0.1 (17A400)

We have a SAML-based SSO App Extension that uses WKWebView to load the SAML login request. This implementation has been working correctly on iOS versions prior to 26. However, starting with iOS 26, the extension consistently crashes when calling WKWebView.load(_:). The crash occurs inside WebKit, specifically in: /Library/Caches/com.apple.xbs/Sources/WebKit/Source/WebKit/UIProcess/WebsiteData/WebsiteDataStore.cpp at WebKit::WebPageProxy::loadRequest(...) No app-level exception is thrown, and the extension terminates with: Thread 10: EXC_BREAKPOINT (code=1, subcode=0x1a31dbe00) It appears that WKWebView initialization or WebsiteDataStore creation is now restricted in extension contexts on iOS 26, but this change is not documented in the SDK release notes. Could you please confirm if this is an intentional sandbox restriction in iOS 26 or a regression in WebKit? Steps to reproduce: Implement an App Extension using ASAuthorizationProviderExtensionAuthorizationRequest. Create a WKWebView instance in the extension. Attempt to load a SAML login request (POST request with headers). Observe immediate crash on iOS 26 (works fine on earlier versions). Expected behavior: WKWebView should load the request or fail gracefully as in prior releases, without crashing the extension process. Request: Please clarify if WKWebView usage inside extensions is officially unsupported as of iOS 26, and if so, recommend an alternative approach for handling SSO flows.

When I open the browser in Safari on iOS 26, I want to specify the background color for the header notch (where the time, battery, etc. are displayed) and the footer indicator area. Specifying the theme color in HTML as shown below did not change anything. <meta name="theme-color" content="#ff0000"> <meta name="theme-color" media="(prefers-color-scheme: light)" content="#ff0000"> <meta name="theme-color" media="(prefers-color-scheme: dark)" content="#ff0000"> The HTML below specifies the background color as green, but is it necessary to specify the background color directly in the body like this? Or is there some kind of metadata, like theme color? <!doctype html> <html lang="ja"> <head> <meta charset="utf-8" /> <meta name="viewport" content="width=device-width,initial-scale=1" /> <meta name="theme-color" content="#ff0000"> <meta name="theme-color" media="(prefers-color-scheme: light)" content="#ff0000"> <meta name="theme-color" media="(prefers-color-scheme: dark)" content="#ff0000"> <title>サンプル</title> </head> <body style="background:#00ff00"> <main> <p>テキスト</p> </main> <div id="overlay" role="dialog" aria-modal="true" data-test-id="health-warning-modal" style=" color:#000000; position:fixed; inset:0; z-index:30000; background:#2563eb; display:grid; /* 初期表示：表示中 */ align-items:center; justify-content:center; overflow-y:auto; " > <div style=" padding:60px 16px; display:flex; flex-direction:column; gap:20px; width:100%; box-sizing:border-box; " > <p style=" font-weight:700; text-align:center; margin-top:20px; font-size:28px; line-height:1.4; " > オーバーレイ </p> </div> </div> </body> </html>

Since Xcode 26 our tests are crashing due to the Main Thread not being able to deallocate WKNavigationResponse. Following an example: import Foundation import WebKit final class WKNavigationResponeMock: WKNavigationResponse { private let urlResponse: URLResponse override var response: URLResponse { urlResponse } init(urlResponse: URLResponse) { self.urlResponse = urlResponse super.init() } convenience init(httpUrlResponse: HTTPURLResponse) { self.init(urlResponse: httpUrlResponse) } convenience init?(url: URL, statusCode: Int) { guard let httpURLResponse = HTTPURLResponse(url: url, statusCode: statusCode, httpVersion: nil, headerFields: nil) else { return nil } self.init(httpUrlResponse: httpURLResponse) } } import WebKit import XCTest final class ExampleTests: XCTestCase { @MainActor func testAllocAndDeallocWKNavigationResponse() { let expectedURL = URL(string: "https://galaxus.ch/")! let expectedStatusCode = 404 let instance = WKNavigationResponeMock() // here it should dealloc/deinit `instance` automatically } Here the call stack: Thread 0 Crashed:: Dispatch queue: com.apple.main-thread 0 CoreFoundation 0x101f3dd54 CFRetain.cold.1 + 16 1 CoreFoundation 0x101e14860 CFRetain + 104 2 WebKit 0x10864dd24 -[WKNavigationResponse dealloc] + 52

Hello We've encountered an issue with WKWebView in the latest iOS 26 beta. When loading a PDF URL, the background of the PDF viewer now displays as a dark gray instead of the expected white. Device: iOS 26 Simulator/Device Component: WKWebView Issue: The background color of the loaded PDF is gray. Expected Behavior: The background should be white, as it has been in all previous iOS versions. Link for Testing: https://help.apple.com/pdf/security/en_US/apple-platform-security-guide.pdf We confirmed that the same PDF and code render with a white background on iOS 26 and earlier. Questions: Is this an intentional change in iOS 26's WKWebView? If so, is there a new property or configuration setting available to control the background color of the PDF viewer within WKWebView? We would like to have the ability to set it back to white. Any insights, workarounds, or information on this matter would be greatly appreciated. Thank you.

YouTube now requires a Referer to be sent to be able to embed Youtube videos, otherwise the videos won't work. But WKWebView doesn't send a Referer when using a custom scheme, so Youtube videos stopped working in that case. This affects Ionic apps, both using Cordova or Capacitor. There's an open issue for Cordova and another one for Capacitor. In these apps, the app is served using a custom scheme like capacitor://localhost or ionic://localhost. I tried modifying the Ionic WebView source code to force adding a referrer to the URL loaded using WKWebView's loadRequest: [request addValue:@"https://my.test.app" forHTTPHeaderField:@"Referer"]; [_engineWebView loadRequest:request] But the Referer is still not sent in the Requests, I guess because the app is using a custom scheme (e.g. capacitor://localhost). However, if I modify this code to force loading an "online URL" (using https) instead of capacitor://localhost, then the my.test.app Referer is sent to the requests. Is there any way to make WKWebView send a Referer when using a custom scheme?

Hi, this is my first post in the community, so please correct me if i am posting this somewhat in a wrong manner. Im using my Apple M1 Pro(14inch, 2021) and installed the os 26 yesterday. Today, I was using Safari, and all of sudden it gets frozen, then the following window popped up. Is this something expected? i.e. my usage is somewhat unusual or is there any report around potential memory leak in Safari? appreciate any suggestions, as Safari is my main browser and currently on hold due to this issue. Thanks

Hi there I've been having trouble finding any details around how safari is supposed to behave when a FairPlay license expires. My assumption was that the video segments would stop getting decrypted and playback would stop, however I just see that the playback continues like nothing has happened. I've setup the "fps_safari_has_key_renewal.html" sample code from the Fairplay SDK and got encrypted playback working. The renewal method also appears to work. However, if I don't issue a renew call, or if I wait several minutes after the renew has succeeded the video never stops (my license is set with a 1 minute expiry so I can test this quickly). I've also observed that the MediaKeySession expiration property is always set to NaN even though my license has an expiry. I've tried with both Lease and Rental expiries set in the license (separately AND at the same time in separate tests). I'm using EZDRM as my drm provider. Just looking for some feedback on if this is supposed to work this way in safari or if license expiry isn't supported in safari. Thanks!

iPadOS 26, dark mode Open Safari Search for anything or open a website that has white background Kill Safari Open Safari again I still can reproduce it with Safari on iPadOS 26.0.1 This issue also happens to my app when opening a HTML/JS on WKWebView with white background while using dark mode. I did send a feedback ticket when using iPadOS 26 beta but havent seen any reply. This is my first time sending a feedback so I dont know if Apple would reply or not.

I'd like to know the install state of my iOS safari extension in the associated swift app. Is there any way to get this? As we have seen it is available for macOS here, is there anyway to know iOS Safari extension is enabled or not? Thanks

Whenever I make a safari view controller on XCode26 Beta 5, there appears to be a blurry white overlay overtop the controller. This worked fine in XCode26 Beta 2, with no code differences. Anyone have any suggestions?

Starting in iOS 26 (tested on 26.1), when I use any of the “policy” methods of WKNavigationDelegate to return an action policy of cancel I get a trace like this printed to console: 1 0x18de71bbc WebKit::WebFramePolicyListenerProxy::ignore(WebKit::WasNavigationIntercepted) 2 0x18db3dd50 WebKit::NavigationState::NavigationClient::decidePolicyForNavigationAction(WebKit::WebPageProxy&, WTF::Ref<API::NavigationAction, WTF::RawPtrTraits<API::NavigationAction>, WTF::DefaultRefDerefTraits<API::NavigationAction>>&&, WTF::Ref<WebKit::WebFramePolicyListenerProxy, WTF::RawPtrTraits<WebKit::WebFramePolicyListenerProxy>, WTF::DefaultRefDerefTraits<WebKit::WebFramePolicyListenerProxy>>&&)::$_0::operator()(WKNavigationActionPolicy, WKWebpagePreferences*) 3 0x100189e5c $sSo24WKNavigationActionPolicyVIeyBhy_ABIeghy_TR 4 0x100189d38 $s16WebkitPolicyTrap14ViewControllerC03webD0_06decideB3For15decisionHandlerySo05WKWebD0C_So18WKNavigationActionCySo0lmB0VctF 5 0x100189df4 $s16WebkitPolicyTrap14ViewControllerC03webD0_06decideB3For15decisionHandlerySo05WKWebD0C_So18WKNavigationActionCySo0lmB0VctFTo 6 0x18db255c0 WebKit::NavigationState::NavigationClient::decidePolicyForNavigationAction(WebKit::WebPageProxy&, WTF::Ref<API::NavigationAction, WTF::RawPtrTraits<API::NavigationAction>, WTF::DefaultRefDerefTraits<API::NavigationAction>>&&, WTF::Ref<WebKit::WebFramePolicyListenerProxy, WTF::RawPtrTraits<WebKit::WebFramePolicyListenerProxy>, WTF::DefaultRefDerefTraits<WebKit::WebFramePolicyListenerProxy>>&&) 7 0x18dea9848 WebKit::WebPageProxy::decidePolicyForNavigationAction(WTF::Ref<WebKit::WebProcessProxy, WTF::RawPtrTraits<WebKit::WebProcessProxy>, WTF::DefaultRefDerefTraits<WebKit::WebProcessProxy>>&&, WebKit::WebFrameProxy&, WebKit::NavigationActionData&&, WTF::CompletionHandler<void (WebKit::PolicyDecision&&)>&&) 8 0x18dea7a34 WebKit::WebPageProxy::decidePolicyForNavigationActionAsync(IPC::Connection&, WebKit::NavigationActionData&&, WTF::CompletionHandler<void (WebKit::PolicyDecision&&)>&&) 9 0x18d9cbbf4 void IPC::handleMessageAsync<Messages::WebPageProxy::DecidePolicyForNavigationActionAsync, IPC::Connection, WebKit::WebPageProxy, WebKit::WebPageProxy, void (IPC::Connection&, WebKit::NavigationActionData&&, WTF::CompletionHandler<void (WebKit::PolicyDecision&&)>&&)>(IPC::Connection&, IPC::Decoder&, WebKit::WebPageProxy*, void (WebKit::WebPageProxy::*)(IPC::Connection&, WebKit::NavigationActionData&&, WTF::CompletionHandler<void (WebKit::PolicyDecision&&)>&&)) 10 0x18d9c7728 WebKit::WebPageProxy::didReceiveMessage(IPC::Connection&, IPC::Decoder&) 11 0x18e49a0d8 IPC::MessageReceiverMap::dispatchMessage(IPC::Connection&, IPC::Decoder&) 12 0x18df1908c WebKit::WebProcessProxy::dispatchMessage(IPC::Connection&, IPC::Decoder&) 13 0x18d9dfc28 WebKit::WebProcessProxy::didReceiveMessage(IPC::Connection&, IPC::Decoder&) 14 0x18e47f72c IPC::Connection::dispatchMessage(WTF::UniqueRef<IPC::Decoder>) 15 0x18e47fac4 IPC::Connection::dispatchIncomingMessages() 16 0x199ad3758 WTF::RunLoop::performWork() 17 0x199ad4eb0 WTF::RunLoop::performWork(void*) 18 0x1804563a4 __CFRUNLOOP_IS_CALLING_OUT_TO_A_SOURCE0_PERFORM_FUNCTION__ 19 0x1804562ec __CFRunLoopDoSource0 20 0x180455a78 __CFRunLoopDoSources0 21 0x180454c4c __CFRunLoopRun 22 0x18044fcec _CFRunLoopRunSpecificWithOptions 23 0x1926be9bc GSEventRunModal 24 0x18630f0d8 -[UIApplication _run] 25 0x186313300 UIApplicationMain 26 0x18554ac38 block_destroy_helper.15 27 0x10018a70c $sSo21UIApplicationDelegateP5UIKitE4mainyyFZ 28 0x10018a67c $s16WebkitPolicyTrap11AppDelegateC5$mainyyFZ 29 0x10018a818 __debug_main_executable_dylib_entry_point 30 0x1000cd3d0 29 dyld 0x00000001000cd3d0 start_sim + 20 31 0x1002bab98 30 ??? 0x00000001002bab98 0x0 + 4297829272 This doesn’t happen in 18.6. Also, it doesn’t seem to have any negative consequences other than the console spam? But then, the navigation is being cancelled anyway, so maybe it’s trapping and just happens to have the effect of not loading the request? Anyway, I guess I can’t upload zips. But it’s pretty easy to reproduce. Just assign a WKWebView a navigationDelegate with an implementation like: func webView(_ webView: WKWebView, decidePolicyFor navigationAction: WKNavigationAction, decisionHandler: @escaping @MainActor (WKNavigationActionPolicy) -> Void) { decisionHandler(.cancel) } and then have it .load() anything. Have I been doing this wrong and 26 exposes it? Or is this a bug in 26? If the latter, any downstream consequences I should be looking out for? macOS 15.7.1 (24G231) Xcode 26.1.1 (17B100) iOS 26.1 (23B86)

Hi, I have an app that uses WKWebView and it's crashing on iOS 26 Simulator in places I've never had problems before. In this case it's crashing when calling WKWebView.callAsyncJavaScript, but in my other project WKWebView is crashing with some sort of EXC_BAD_ACCESS other than callAsyncJavaScript. Am I missing something? Thanks,

It seems that in iOS 18.5+ built with Xcode 16.4+, there has been a breaking change since 18.4 with 16.3 within WebKit and how the navigationAction.sourceFrame property is initialized when implementing the decidePolicy delegate method. The flow goes: Implement a WKNavigationActionDelegate with decidePolicy Call WKWebView.loadHTMLString("some-string", baseURL: nil) Upon loading the HTML content, read the value of navigationAction.sourceFrame within the decidePolicy method of the WKNavigationActionDelegate On iOS 18.4 (and below) with Xcode 16.3 (and below); navigationAction.sourceFrame is <uninitialized> On iOS 18.5+ with Xcode 16.4+: navigationAction.sourceFrame is already initialized and is equal to navigationAction.targetFrame It appears that this change was made between minor versions of Xcode and is unexpected behavior of a minor version. Not only was this not called out in the release notes for Xcode 16.4 and iOS 18.5, but it's technically also a breaking change to the WebKit API. Can we get insight on why this change was made and what Apple's policy is on breaking changes between minor versions of Xcode/iOS?

Hello, In iOS 26 beta, we are seeing an unexpected behavior when using SwiftUI WebView (or a custom WKWebView via UIViewRepresentable). When an alert is presented above the WebView, the WebView immediately reloads to its initial page. The alert itself also disappears instantly, making it impossible for the user to interact with it. This issue occurs both with the new SwiftUI WebView / WebPage API and with a wrapped WKWebView. The problem was not present in previous iOS versions (iOS 17/18). Steps to reproduce: Create a SwiftUI view with a WebView (pointing to any URL). Add a toolbar button that toggles a SwiftUI alert. Run the app on iOS 26 beta. Tap the button to trigger the alert. Expected behavior: The WebView should remain as-is, and the alert should stay visible until the user dismisses it. Actual behavior: As soon as the alert appears, the WebView reloads and resets to the initial page. The alert disappears immediately. Minimal Example: struct ContentView: View { @State private var showAlert = false var body: some View { NavigationStack { WebView(URL(string: "https://apple.com")!) .toolbar { ToolbarItem(placement: .topBarTrailing) { Button("Close") { showAlert = true } } } .alert("Confirm close?", isPresented: $showAlert) { Button("Cancel", role: .cancel) {} Button("Close", role: .destructive) {} } } } } I'm using Xcode Version 26.0 beta 7 Thanks for your help.

Our current iOS application utilizes WKWebView to display a web application. We've observed intermittent deletion of non-expired 1st-party persistent cookies within this web application, leading to session drops. Here are our environment details and specific questions: Environment: App Build: Built with Xcode 16.2. WebView Class: WKWebView. Cookie Type: 1st-Party Persistent Cookie (Explicit expiration set, not a session cookie). Domain Configuration: The content server and the cookie-issuing server are the same (same IP address, same eTLD+1). The Cookie is set via the Set-Cookie HTTP Header on the server side. Questions: Automatic Deletion Policy: Are there any scenarios (e.g., related to iOS system behavior, Safari policies, or Intelligent Tracking Prevention (ITP)) where iOS or Safari might automatically delete non-expired 1st-party persistent cookies used by WKWebView? Deletion Conditions: If the answer to Q1 is Yes, under what specific conditions (e.g., memory pressure, inactivity, storage limits, specific ITP criteria) does this cookie deletion occur, and does the behavior differ significantly across various iOS versions? OS Update Impact: Are there any known specifications or documented cases where an iOS version update itself triggers the mass deletion of existing cookies stored in the WKWebsiteDataStore? Mitigation Strategy: If this automatic deletion is a known behavior, what mitigation strategies are officially recommended to ensure the persistence of essential 1st-party authentication cookies (e.g., manual synchronization with WKHTTPCookieStore or Keychain/UserDefaults)? Official Documentation: If the answer to Q1 is Yes, please provide URLs to any official Apple documentation or technical notes that detail the specifications or behavior of 1st-party persistent cookie deletion within WKWebView.