ARCamera.TrackingState questions: Did the threshold or sensitivity for transitioning ARCamera.TrackingState from .normal to .limited(.excessiveMotion) or .limited(.insufficientFeatures) change between iOS 26.3 and iOS 26.4? What does "ARWorldTrackingTechnique: resource constraints [33]" mean, and is it new in iOS 26.4? Does it correspond to a tracking state degradation? Is there a way for the client to detect or respond to ARKit entering a resource-constrained mode short of the full tracking state transition — for example, a lower-level notification or a flag on ARFrame — so that apps can take protective action without interpreting it as a full tracking failure? ARCamera.unprojectPoint questions: Did the behavior of ARCamera.unprojectPoint(_:ontoPlane:orientation:viewportSize:) change between iOS 26.3 and iOS 26.4 for near-parallel geometry? Specifically, on iOS 26.3 this method returns nil when the camera ray is nearly parallel to the target plane (denominator of the ray-plane intersection → 0 at ~90° of camera rotation). On iOS 26.4, with identical code and environment, it returns a large finite value instead — we observed z = −12.27m. Since the method's optional return type implies nil is the documented signal for no valid intersection, this reads as a behavioral regression rather than an intentional change. If returning the computed value for near-parallel geometry is now the intended behavior, is there a recommended way for the caller to guard against it? For example, should we check abs(dot(rayDirection, planeNormal)) against a threshold before calling, and if so, is there a documented epsilon Apple uses internally? Alternatively, is there a newer API we should prefer over unprojectPoint(:ontoPlane:) for this use case that handles degenerate geometry more gracefully — such as ARSession.raycast(:)? Are there any other ARKit API adjustments between OS 26.3 and 26.4? We are using the same codebase, but it behaves differently in between these 2 OS versions now. Thanks!

I have two RealityView: ParentView and When click the button in ParentView, ChildView will be shown as full screen cover, but the camera feed in ChildView will not be shown, only black screen. If I show ChildView directly, it works with camera feed. Please help me on this issue? Thanks. import RealityKit import SwiftUI struct ParentView: View{ @State private var showIt = false var body: some View{ ZStack{ RealityView{content in content.camera = .virtual let box = ModelEntity(mesh: MeshResource.generateSphere(radius: 0.2),materials: [createSimpleMaterial(color: .red)]) content.add(box) } Button("Click here"){ showIt = true } } .fullScreenCover(isPresented: $showIt){ ChildView() .overlay( Button("Close"){ showIt = false }.padding(20), alignment: .bottomLeading ) } .ignoresSafeArea(.all) } } import ARKit import RealityKit import SwiftUI struct ChildView: View{ var body: some View{ RealityView{content in content.camera = .spatialTracking } } }

I have an iOS app that uses RealityView to display some models and interact with them, and the app uses regular iOS app navigations, then a challenge I'm facing is how to maintain multiple RealityView on multiplescreens. For example Screen A has a RealityView, and then I navigate to Screen B (also has a RealityView) using stack based navigation, when I do so I got a crash -[MTLDebugRenderCommandEncoder validateCommonDrawErrors:]:5970: failed assertion `Draw Errors Validation Fragment Function(fsRealityPbr): argument envProbeTable[0] from Buffer(7) with offset(0) and length(16) has space for 16 bytes, but argument has a length(864). Fragment Function(fsRealityPbr): incorrect type of texture (MTLTextureType2D) bound at Texture binding at index 20 (expect MTLTextureTypeCubeArray) for envProbeDiffuseArray[0]. Interestingly this crash only happens when debugging with Xcode, not happens when the app runs on its own. I'm not sure what I'm doing is anti-pattern or it's some Xcode debugging limitation.

I use ARKit for motion tracking. I get the skeleton joint coordinates and use them for animation. I didn't make any changes to the code, but I updated the iOS version from 18 to 26, and modelTransform now always returns nil. https://developer.apple.com/documentation/arkit/arskeleton3d/modeltransform(for:) For example bodyAnchor.skeleton.modelTransform(for: .init(rawValue: "head_joint")) bodyAnchor is ARBodyAnchor. I see the default skeleton on the screen, but now I can't get the coordinates out of it. I'm using an example from Apple's WWDC presentation. https://developer.apple.com/documentation/arkit/capturing-body-motion-in-3d Are there any changes in the API? Or just bug?

Hi, is there a way to track feet in a visionOS app in an immersive space? I want the whole body to be visible in VR, and I want to know if the user touches an object with their foot.

I have already add liscene and entitlement for Passthrough in screen capture, but still get black background instaed of real world. Do you have any idea ? I've been stuck with this question for a long time 😢

I am using AccessoryTrackingProvider from ARKit to get the transform of the PSVR2 controller via originFromAnchorTransform of the AccessoryAnchor. I also am trying to use AnchorEntity on the controller using RealityKit However, none of the three options for Accessory.LocationName, which should be used to define the AnchorEntity target, seem to match the position on the controller which is being sent from ARKit. The picture attached is showing two transforms: RealityKit - using .gripSurface to define the AnchoringComponent.Target.accesssory location. ARKit - using originFromAnchorTransform for AccessoryTrackingProvider. They are not aligned at the same point. As for the other options of Accessory.LocationName, using .aim is located at the tip of the controller and .grip is the same position as .gripSurface but with a different orientation. I am wondering why there is not an option for Accessory.LocationName that actually matches the transform captured by ARKit?

I have a ModelEntity with GroundingShadowComponent entity.enumerateHierarchy { child, stop in child.components.set(GroundingShadowComponent(castsShadow: true)) } When I set it on the table, I can see the shadow on the table, even if I disable plane detection. However, when I enable plane detection, and the plane's material is OcclusionMaterial. I can not see the shadow on the table. As far as I know, receivesDynamicLighting is not usable in VisionOS. So how can I cast shadow on OcclusionMaterial in VisionOS? Or rather, is it possible to have the shadow properly displayed on the tabletop while ensuring that I cannot see objects beneath the table through it?

Dear Apple Team, I’m a high school student (vocational upper secondary school) working on my final research project about LiDAR sensors in smartphones, specifically Apple’s iPhone implementation. My current understanding (for context): I understand Apple’s LiDAR uses dToF with SPAD detectors: A VCSEL laser emits pulses, a DOE splits the beam into a dot pattern, and each spot’s return time is measured separately → point cloud generation. My specific questions: How many active projection dots does the LiDAR projector have in the iPhone 15 Pro vs. iPhone 12 Pro? Are the dots static or do they shift/move over time? How many depth measurement points does the system deliver internally (after processing)? What is the ranging accuracy (cm-level precision) of each measurement point? Experimental background: Using an IR night vision camera, I counted approximately 111 dots on the 15 Pro vs. 576 dots on the 12 Pro. Do these match the internal specifications? Photos of my measurements are available if helpful. Contact request: I would be very grateful if you could connect me with an Apple engineer or ARKit specialist who works with LiDAR technology. I would love to ask follow-up questions directly and would be happy to provide my contact details for this purpose. These specifications would be essential for my research paper. Thank you very much in advance! Best regards, Max! Vocational Upper Secondary School Hans-Leipelt-Schule Donauwörth Research Project: “LiDAR Sensor Technology in Smartphones”

ARSession provides video stream from the wide angle camera. If ARSession uses the ultra wide camera at the same time, ARSession may provide video stream from that camera, otherwise AVCaptureSession with an ultra wide camera should be allowed to launch. It would be very very useful if we can access different cameras while ARSession is running. We'd like to cooperate with you if possible. Steps to reproduce: run an AVCaptureSession and then run an ARSession. The AVCaptureSession stops.

Hardware Specifications Regarding the LiDAR scanner in the iPhone 13/14/15/16/17 Pro series, could you please provide the following technical details for academic verification: Point Cloud Density / Resolution: The effective resolution of the depth map. Sampling Frequency: The sensor's refresh rate. Accuracy Metrics: Official tolerance levels regarding depth accuracy relative to distance (specifically within 0.5m – 2m range). Data Acquisition Methodology For a scientific thesis requiring high data integrity: Does Apple recommend a custom ARKit implementation over third-party applications (e.g., Polycam) to access raw depth data? I need to confirm if third-party apps typically apply smoothing or post-processing that would obscure the sensor's native performance, which must be avoided for my error analysis.

https://developer.apple.com/documentation/arkit/arpointcloud https://developer.apple.com/documentation/arkit/arframe/rawfeaturepoints The point cloud (collection of points/features) main intention is a debug visualization to what the underlying tracking algorithm processes and is not designed for additional algorithms on top of that. But, we are utilizing information contained in the points/features collected by ARKit. Currently, the range of rawfeaturepoints is limited to about 10 meter from the device. We see a great chance if the range is unlock. The global localization will be more robust and accurate. ARPointCloud - Apple ARKit - FindSurface YouTube SIdQRiLj2jY

The samples shown in volumetric work great but moving to an immersive experience the pen physical buttons don't work when you're focusing to an entity with a collision.

Error: RoomCaptureSession.CaptureError.exceedSceneSizeLimit Apple Documentation Explanation: An error that indicates when the scene size grows past the framework’s limitations. Issue: This error is popping up in my iPhone 14 Pro (128 GB) after a few roomplan scans are done. This error shows up even if the room size is small. It occurs immediately after I start the RoomCaptureSession after the relocalisation of previous AR session (in world tracking configuration). I am having trouble understanding exactly why this error shows and how to debug/solve it. Does anyone have any idea on how to approach to this issue?

Since updating to iOS 26.0 (and confirmed on 26.1), ARBodyTrackingConfiguration no longer detects a valid ARBodyAnchor on devices with LiDAR (e.g., iPhone 15 Pro, iPhone 17 Pro Max). This issue reproduces in custom projects and Apple’s official sample “Capturing Body Motion in 3D”. The AR session runs normally, but the delegate call: func session(_ session: ARSession, didUpdate anchors: [ARAnchor]) never yields an ARBodyAnchor with valid joint transforms. All joints return nil when calling: body.skeleton.modelTransform(for: jointName) resulting in 0 valid joints per frame. Environment • Device: iPhone 17 Pro Max (LiDAR) • iOS: 26.0 / 26.1 • Xcode: 16.0 (stable) • Framework: ARKit + RealityKit • Configuration used: config.worldAlignment = .gravityAndHeading config.isAutoFocusEnabled = true config.environmentTexturing = .none session.run(config) Also tested: with and without frameSemantics = .bodyDetection Expected Behavior ARBodyAnchor should be detected and body.skeleton should contain ~89 valid joints with continuous updates.

i'd like to have a little bit control over the transparency of the videomaterial. is there any way to prepare a shadergraph unlit shader and use it with the videomaterial.

Hi there, I received an enterprise license file to include enhanced object tracking configuration for the Vision Pro. My account is part of the team which got the allowance from Apple to use this capability. Unfortunately, although I followed the guide, I do not find the Object Tracking capability when I try to add it to my project. There are other capabilities like Main Camera on the Vision Pro, but not for Object Tracking. I am using Xcode 26.1 and visionOS 26.1. What am I missing here? Thanks in advance, Matthias

Problem Description: I am developing an application that runs in the Shared Space on Apple Vision Pro using Unity. When using the UI ScrollView (Scroll View) component, I found that the Mask / RectMask2D does not function in the Shared Space. Scrolling content is not masked or cropped; it extends beyond the view boundary and is displayed directly. The same UI works correctly across platforms such as Unity Editor, iOS, and macOS, but the issue only occurs in the shared space of Vision Pro. Reproduction steps: Create a ScrollView in Unity. Add a Mask or RectMask2D to the viewport. Deploy the application to Apple Vision Pro and run it in Shared Space mode. Sliding content will not be clipped by the mask, and the masked area is entirely ineffective. Expected behavior: The content of ScrollView should be properly clipped by Mask / RectMask2D and should not render outside the mask boundary. Actual results: In the shared space of Vision Pro, the mask is ineffective, causing scrolling content to extend beyond the designated area and resulting in severe UI distortion. Environmental Information: Device: Apple Vision Pro Mode: Shared Space Unity Version: 6000.0.40f1 visionOS version: visionOS 26.0 Unity PolySpatial Version: 2.0.4 Impact This issue causes Unity UI to fail to display correctly on Vision Pro, preventing ScrollView from properly clipping content, which impacts the UI experience and interaction effects in practical applications. Expected Result: When running a Unity app in the shared space of visionOS, the Mask / RectMask2D of ScrollView functions correctly

What is the reason the hand-tracking joints have these axes? I'm trying to create a virtual hands model and that's a mess.

My development team admin requested the Enterprise API for camera access on the vision pro. We got that granted, got a license for usage, and got instructions for integrating it with next steps. We did the following: Even when I try to download and run the sample project for "Accessing the Main Camera", and follow all the exact instructions mentioned here: https://developer.apple.com/documentation/visionos/accessing-the-main-camera I am just unable to receive camera frames. I added the capabilities, created a new provisioning profile with this access, added the entitlements to info.plist and entitlements, replaced the dummy license file with the one we were sent, and also have a matching bundle identifier and development certificate, but it is still not showing camera access for some reason. "Main Camera Access" shows up in our Signing & Capabilities tab, and we also added the NSMainCameraDescription in the Info.plist and allow access while opening the app. None of this works. Not on my app, and not on the sample app that I just downloaded and tried to run on the Vision Pro after replacing the dummy license file.