I am using Entity of RealityKit to display virtual content, however I find that sometimes the real object in front of the virtual content can not occulude the virtual content. For example, I place an Entity in a room, but when I walk into another room, I can still see the Entity through the wall. I wonder how should I fix the problem. Thank you!

I am currently creating an app where two people share an instance of an immersive space so that they are able to point to certain things in the immersive space. Right now, other people are hidden behind the immersive space, and even with people awareness enabled for everything, people are still too difficult to see. I've found this documentation (https://developer.apple.com/documentation/arkit/occluding-virtual-content-with-people) which describes what I want to do, but it is only listed as working on iOS an iPadOS. Is there anything similar to this that will work on VisionOS?

Is it possible to detect distance from the vision pro to real live objects and people? I tried using scene.raycast to perform a raycast forward from the center of the viewport, but it doesn't seem to react to real life objects, only entities. I see mentioned here: https://developer.apple.com/forums/thread/776807?answerId=829576022#829576022, that a raycast with scene reconstruction should allow me to measure that distance, as long as the object is non-moving. How could I accomplish that?

As far as I know, Apple hasn’t opened access to the Vision Pro camera for developers yet, so I’m trying to find possible workarounds within the current capabilities. I’m wondering if there’s any way to apply a mesh to a person in the scene in Vision Pro, or if there’s an alternative approach to roughly detect a human shape in front of the user?

I am looking for a material that functions in the same way that Occlusion Material does, except that it only partially occludes whatever is behind it. One way that I have thought of doing this was to change the opacity of the entity that was covered in Occlusion Material, however this did not change anything. Please let me know if this is possible.

Hi, I'm playing now with hand tracking. I want to get position of hand inside a system update function. I was not sure if transform I'm getting from hand attached AnchorEntity (with trackingMode: .predicted) would give same results as handAnchors(at:) from hand tracking provider, so I started to read them both and compare. For handAnchors i tried using context.scene.timebase.sourceTimebase!.sourceClock!.time.seconds and CACurrentMediaTime() as timestamp source. They seem to use exactly same clock, so that doesn't matter, but: for some reason update handler is always called twice with same context.deltaTime, but first time the query finds 0 entities, second time it finds them all. The query is the standard EntityQuery(where: .has(MyComponent.self)) and in update (matching: Self.query, updatingSystemWhen: .rendering). Here's part of logs: System update called, entity count: 0, dt: 0.01000458374619484, absTime: 4654.222593541 System update called, entity count: 11, dt: 0.01000458374619484, absTime: 4654.22262525 System update called, entity count: 0, dt: 0.009999999776482582, absTime: 4654.249390875 System update called, entity count: 11, dt: 0.009999999776482582, absTime: 4654.249425 accounting for the double update calling I started to calculate time delta of absolute time between calls and they're most of the time much bigger, or much smaller than advertised by system's context.deltaTime, only sometimes they kind of match, for example: system: (dt: 0.01000458374619484) scene : (dt: 0.021419291667371) (absTime: 4654.222628125001) and the very next call system: (dt: 0.010009 166784584522) scene : (dt: 0.0013097083328830195) (absTime: 4654.223937833334) but sometimes system: (dt: 0.009999999776482582) scene : (dt: 0.009 112249999816413) (absTime: 4654.351299 166668) Shouldn't those be more or less equal, or am I missing something? In the end it seems that getting hand position from AnchorEntity and with handAnchors(at:) gives kind of same results, but at different time points, so I'd love to understand what's the correct way to use them and why time flows differently :). --Edit-- P.S. Had to put spaces everywhere in logs between "9" and "1", otherwise post was blocked due to "sensitive content" :D

Using the example code posted here: https://developer.apple.com/documentation/visionOS/tracking-images-in-3d-space I can register multiple ReferenceImage s with a ImageTrackingProvider, but only one updates at a time - to have realtime updating, I can only have one ImageAnchor in my field of view at a time. Is it possible to track multiple imageAnchors at the same time in the same field of view? As in having several ImageAnchor's tracked and entities updated to the transforms of the anchor in the same frame/moment from the Apple Vision Pro?

Hi 26 beta guys, I have apps using ARKit. In iPadOS 26 beta, ARKit stops working after switching to other apps. how to: Enable WindowMode in iPadOS 26 Launch my app and start ARSession Switch to another app (preference app, etc.) Switch back to my app AR stops updating camerafeed. I debug printed ARSessionDelegate, and found that after sessionWasInterrupted was called, sessionInterruptionEnded was never called. sessionInterruptionEnded is called if WindowMode disabled. Is this just a bug for 26 beta? I suspect there is similar problem with non-AR camera. Any idea?

Hello, I am trying to develop an app that broadcasts what the user sees via Apple Vision Pro. I am a graduate student studying at the university. And I have two problems, If I want to use passthrough in screen capture (in VisionOS), do I have to join Apple Developer Enterprise Program to get Enterprise API? and Can I buy Apple Developer Enterprise Program (Enterprise API) with my university account? Have any of you been able to do this? Thank you

I have read in the apple documentation and on forums that in order to access the camera and capture images on VisionPro, both an Entitlement and an Enterprise.license are required. I already have the Entitlement, but I don’t yet have the Enterprise.license. I would like to ask: is the Enterprise.license strictly required to gain camera access for capturing images? How can I obtain this file, and does it require an Enterprise account? Currently, my developer account is a regular Developer 99$, not an Enterprise account.

Hi everyone, We’re developing a Unity project for Apple Vision Pro that connects PSVR2 Sense controllers for advanced interaction and input. We’ve encountered a major limitation: when the controller is not held close to the designated hand (e.g., resting on a table or held by the non designated hand), the Sense controller enters a low-power or reduced-update mode. This results in noticeably reduced tracking update frequency and responsiveness until the controller is held again. For certain use cases, this behavior is undesirable. In our case, it prevents continuous real-time tracking of the controller even when it’s stationary or being tracked externally. Request: Please consider exposing an API flag or developer option in ARKit to disable and optionally delay the low-power mode when the app requires full-rate updates regardless of proximity or hand pose detection.

0 I’m using ARKit + SceneKit (Swift) with ARWorldTrackingConfiguration and detectionImages to place a 3D object (USDZ via SCNScene(named:)) when a reference image is detected. While the image is tracked, the object stays correctly aligned. Goal: When the tracked image is no longer visible, I want the placed node to remain visible and fixed at its last known pose (no drifting) as I move the camera. What works so far: Detect image → add node → track updates When the image disappears → keep showing the node at its last pose Problem: After the image is no longer tracked, the node drifts as I move the device/camera. It looks like it’s still influenced by the (now unreliable) image anchor or accumulating small world-tracking errors. Question: What’s the correct way in ARKit to “freeze” the node at its last known world transform once ARImageAnchor stops tracking, so it doesn’t drift?

i'd like to have a little bit control over the transparency of the videomaterial. is there any way to prepare a shadergraph unlit shader and use it with the videomaterial.

Hardware Specifications Regarding the LiDAR scanner in the iPhone 13/14/15/16/17 Pro series, could you please provide the following technical details for academic verification: Point Cloud Density / Resolution: The effective resolution of the depth map. Sampling Frequency: The sensor's refresh rate. Accuracy Metrics: Official tolerance levels regarding depth accuracy relative to distance (specifically within 0.5m – 2m range). Data Acquisition Methodology For a scientific thesis requiring high data integrity: Does Apple recommend a custom ARKit implementation over third-party applications (e.g., Polycam) to access raw depth data? I need to confirm if third-party apps typically apply smoothing or post-processing that would obscure the sensor's native performance, which must be avoided for my error analysis.

I use ARKit to build an app, scan rooms to collect the spatial data of objects and re-construct the 3D scene. the problem is I found the depth map values captured in ARFrame significantly deviate from the real distances, even nonlinearly, for the distances below 1.5m, values are basically correct, but beyond 1.5m, they are smaller than real values. for example read 1.9m from the generated depthmap.tiff, but real distance is 3 meters. below is my code of generating tiff file to record depth map data: Generated TIFF file (captured from ARKit): as shown above, the maximum distance is around 1.9m, but real distance to that wall is more than 3 meters, and also you can see, the depth map picture captured in ARKit is quite blurry, particularly at far distance (> 2.0m), almost smeared out. Generated TIFF file (captured from AVFoundation): In comparison, the depth map captured from traditional AVFoundation and with the same hardware device is much clear, the values seem not in meter unit though.

I am a newby of spatial computing. Here I am learning how to use ARKit to capture the environment texture and apply it on a ModelEntity of RealityKit on Vision Pro. But I do not find a demo of how to use EnvironmentLightEstimationProvider. After checking the documentation, I also have some questions: EnvironmentProbeAnchor.environmentTexture is a MTLTexture, but EnvironmentResource needs a CGImage. How do I translate MTLTexture to CGImage(Forgive me that I do not know much about Metal or other framework, so It will be better if there is a code that I can copy and paste directly) It seems that the EnvironmentProbeAnchor can only get the light information around the device. But what should I do if I want get the light information around the ModelEntity so that I can apply the environment texture on it. It will be better if you can provide a code demo about how to use the new api. Thank you!

I am a newby of spatial computing and I am using ARKit and RealityKit to develop a visionPro app. I want to accomplish such a goal: If the user's hand touchs an object(an entity in RealityView) on the table, it will post a Window. But I do not know how to handle the event "the user's hand touchs the object". Should I use hand tracking feature to do some computing by myself? Or is there some api to use directly? Thank you!

Hello, We discovered that a bunch of our old animated models were no longer animated on iOS15 and onwards. After a few days of playing spot the difference between usda files I noticed that all the broken models had an xform called "Scene". Lo and behold, changing the name of that xform fixed the issue on all the models. Even lowercase "scene" makes the animations work again. Is "Scene" a reserved keyword or something? What other keywords do we need to avoid so we can create more robust USDZ files? I'm surprised this issue isn't more widespread considering Blender wraps models in a "Scene" node. At the drive link below you can find two animated cube USDZs. The only difference is the name of one of the xforms. The one with a "Scene" xform is not animated in quicklook (replicated on iPhone 13 iOS v15.2, iPhone 13 iOS v 18.3, and various devices on Browserstack including iPhone 16 iOS v18.3). https://drive.google.com/drive/folders/1dch1WaM9O6mbHy29S6NGWgnSHkZkPiBf?usp=sharing

I am developing an visionos app. I load a .usdz file as a Reality Entity(such as a cabbage). And I want such an effect: When I turn on a desk lamp in real world near the Entity, the surface of the Entity will correctly respond to the light in the real world. I want an effect like this: https://www.reddit.com/r/virtualreality/comments/1as01mm/shiny_disco_ball_reflecting_my_room/ I look up the api such as ImageBasedLightComponent andVirtualEnvironmentProbeComponent in RealityKit、EnvironmentLightEstimationProvider in ARKit，but I do not know how to code. Besides, it will be better if the shadow will also respond to the light correctly.

I am developing an app in VisionPro using RealityKit and ARKit. I want my RealityKit entity looks more realistic. So it is important to render its shadow based on light in real world. e.g. When I turn on the light in real world, the shadow of the entity will change. Can this effect be implemented in VisionPro?