I am using Xcode 27 beta 3 Device Hub with iPadOS Simulator. The iPadOS app I'm developing supports a standard two finger pinch/unpinch gesture to zoom in and out. In Xcode 26 Simulator, I could hold down the option key to zoom in and out with a two finger multitouch gesture. How can I effect a two finger multitouch zoom gesture with Xcode 27 beta 3 Device Hub iPadOS Simulator? I tried holding down the option key, which did not work. I tried using a macOS two finger multitouch pinch/unpinch zoom gesture, but this did not work. I've spent about 30 minutes investigating this, searching through Device Hub Settings and macOS Settings and exploring different permutations of options and reading Xcode 27 beta release notes. The Option key worked great in Xcode 26 iPadOS Simulator. I'd appreciate any assistance that an Apple Engineer could provide. Thank you.

For a UIKit app based on scenes (UIScene), is it safe to reference UserDefaults in code that is executed from UIApplicationDelegate/application(_: didFinishLaunchingWithOptions:) ? I've read that in iOS 15, there were undocumented scenarios involving app prewarming that would cause UserDefaults reads to fail within a window of time after device reboots, as described at https://christianselig.com/2024/10/beware-userdefaults/ The failure mode is that an app would be released, and months later, a small fraction of users would report failures consistent with UserDefaults reads unexpectedly returning nil, causing a loss of data. The user experience is bad, and debugging this behavior is then challenging because of how rarely it occurs. Apple's https://developer.apple.com/documentation/uikit/app_and_environment/responding_to_the_launch_of_your_app/about_the_app_launch_sequence#3894431 seems to suggest that prewarming only executes an app "up until, but not including when main() calls UIApplicationMain(_:_:_:_:), but https://stackoverflow.com/questions/71025205/ios-15-prewarming-causing-appwilllaunch-method-when-prewarm-is-done documents that UIApplicationDelegate/application(_: didFinishLaunchingWithOptions:) has in fact been observed executing during app prewarming in scene-based apps. So, my question: In an app based on scenes, if I'd like to reference UserDefaults within UIApplicationDelegate/application(_: didFinishLaunchingWithOptions:), when is it safe to do this? I'm guessing the answer is one of these: Never. Only in apps that don't support scenes. Only in iOS 16 or later. Only in IOS 17 or later. Is it guaranteed safe to reference UserDefaults in UIWindowSceneDelegate/scene(_:willConnectTo:options:) or later? Is there documentation from Apple regarding this issue? Thank you.

I’m familiar with using ModelSortGroupComponent to control draw order, but how does RealityKit determine the draw order between model sort groups? How can I enforce a specific draw order between two model sort groups that require different depth pass modes and therefore can't be combined into a single model sort group? Are there model bounding box tricks I can safely rely on?

My visionOS 26.3 app displays a diorama-like scene in a RealityView in a mixed immersive space, about 1 meter square, with view attachments floating above the scene. Each view attachment fades out after user interaction, by animating the view's opacity. What I'm observing is that depending on the position of a view attachment relative to the scene and the camera, an unwanted cutout effect is observed (presumably because of draw order issues), as shown in the right column in the screenshots below. YouTube video link of these sequences: https://youtu.be/oTuo0okKCkc (19 seconds) My question: How does visionOS determine the view attachment draw order relative to the RealityView scene? If I better understood how the draw order is determined, I could modify my scene to ensure that the view attachments were always drawn after the scene, fixing the unwanted cutout effect. I've successfully used ModelSortGroupComponent to control the draw order of entities within the RealityView scene, but my understanding is that this approach cannot be used with view attachments. I've submitted FB22014370 about this issue. Thank you.

I first started using the SwiftUI pushWindow API in visionOS 26.2, and I've reported several bugs I discovered, listed below. Under certain circumstances, pushed window relationships may break, and this behavior affects all other apps, not just the app that caused the problem, until the next device reboot. In other cases, the system may crash and restart. (FB21287011) When a window presented with pushWindow is dismissed, its parent window reappears in the wrong location (FB21294645) Pinning a pushed window to a wall breaks pushWindow for all other apps on the system (FB21594646) pushWindow interacts poorly with the window bar close app option (FB21652261) If a window locked to a wall calls pushWindow, the original window becomes unlocked (FB21652271) If a window locked in place calls pushWindow and the pushed window is closed, the system freezes (FB21828413) pushWindow, UIApplication.open, and a dismissed immersive space result in multiple failures that require a device reboot (FB21840747) visionOS randomly foregrounds a backgrounded immersive space app with a pushed window's parent window visible instead of the pushed window (FB21864652) When a running app is selected in the visionOS home view, windows presented with pushWindow spontaneously close (FB21873482) Pushed windows use the fixed scaling behavior instead of the dynamic scaling behavior I'm posting the issues here in case this information is helpful to other developers. I'd also like to hear about other pushWindow issues developers have encountered, so I can watch out for them. Questions: I've discovered that some of the issues above can be partially worked around by applying the defaultLaunchBehavior and restorationBehavior scene modifiers to suppress window restoration and locking, which pushWindow appears to interact poorly with. Are there other recommended workarounds? I've observed that the Photos and Settings apps, which predate the pushWindow API, are not affected by the issues I reported. Are there other more reliable ways I could achieve the same behavior as pushWindow without relying on that API? I'd appreciate any guidance Apple engineers could provide. Thank you.

I am using the Xcode 26.3 Claude Agent feature. Claude Agent can’t access on my Desktop folder when they are specified as chat attachments because I accidentally denied access to that folder when it was first requested. I had earlier read the Xcode 26.3 release notes, so I was somewhat aware of this known issue, but I didn't make the connection when the Desktop access prompt appeared. I wasn't expecting the permissions prompt, because the regular (non-agent) Xcode Claude is able to freely access Desktop files when they are specified as Xcode coding assistant chat session attachments. Claude Agent isn’t listed in macOS Settings > Privacy & Security > Files and Folders, so I can’t fix the permissions there. The TCC database contains these rows: % sqlite3 ~/Library/Application\ Support/com.apple.TCC/TCC.db \ "SELECT service, client, datetime(last_modified, 'unixepoch', 'localtime') as last_modified FROM access ORDER BY last_modified DESC" | head -2 kTCCServiceSystemPolicyDownloadsFolder|/Users/drew/Library/Developer/Xcode/CodingAssistant/Agents/Versions/26.3/claude|2026-02-07 15:19:25 kTCCServiceSystemPolicyDesktopFolder|/Users/drew/Library/Developer/Xcode/CodingAssistant/Agents/Versions/26.3/claude|2026-02-07 13:38:07 but I can’t seem to reset them using tccutil, apparently because /Users/drew/Library/Developer/Xcode/CodingAssistant/Agents/Versions/26.3/claude is not a valid bundle identifier: % tccutil reset all '/Users/drew/Library/Developer/Xcode/CodingAssistant/Agents/Versions/26.3/claude' tccutil: No such bundle identifier "/Users/drew/Library/Developer/Xcode/CodingAssistant/Agents/Versions/26.3/claude": The operation couldn’t be completed. (OSStatus error -10814.) I would like for Claude Agent to be able to access my Desktop folder. What is an appropriate next step? Thank you for any help you can provide.

Posting this here in case this information is helpful to other developers: As of visionOS 26.3 beta 1, onWorldRecenter has two significant issues: (FB21557639) Memory Leak: When onWorldRecenter is assigned to a RealityView within an ImmersiveSpace, it appears to retain a strong reference to the view's internal SwiftUI context. When the immersive space is dismissed, the view's @State objects will not be deallocated. Also, each time the immersive space view's body is executed, additional state storage will be allocated and leaked. Multiple Callbacks: When the user long-presses the Digital Crown, the onWorldRecenter closure will be called multiple times, once for each past view body execution, including those of immersive space views that have been previously dismissed. Although these issues seem to be most prevalent when onWorldRecenter is used with an ImmersiveSpace, they may also occur in the context of a WindowGroup under certain circumstances. It's possible to work around this problem by moving onWorldRecenter to an empty overlay view within the app's primary WindowGroup and forwarding the world recenter events to ImmersiveSpace views through a notification system, coupled with a debouncer as an extra precaution.

Each time I try to launch Xcode 26, it immediately crashes in SourceEditorDataSource.ideChat_gracefullyApplyChangesToReflect. I'm now no longer able to use Xcode. A partial crash log attached. So far I've tried deleting derived data, rebooting, deleting ~/Library/Caches/com.apple.dt.Xcode. What should I do? Thank you in advance for any help. crash-report.txt

I posted https://developer.apple.com/forums/thread/809481 yesterday about an issue I discovered with pushWindow in visionOS 26.2 RC, but today I discovered a second problem with pushWindow. If window A calls pushWindow to present window B, and the user pins window B to a wall, the following unexpected behaviors are observed: Window B spontaneously disappears. If the user re-launches the (still running) app from the visionOS home view, both window A and window B appear simultaneously. I assume only window B should be visible at this point, since window A pushed window B. If the user closes window B, it's now impossible to present window B again. Calls to pushWindow appear to be ignored. If the user force-quits the app and relaunches it, and pushWindow is called again, window B appears, but window A remains visible. I also noticed this surprising behavior: This broken state of pushWindow behavior now affects all other apps on the system that may call pushWindow in the future, not just the app whose pushed window was pinned above. A workaround is to reboot the device, and then the system will behave as expected until the next time the user pins a pushed window.

I recently added pushWindow to my app, and I discovered that in visionOS 26.2 RC (23N301), pushWindow followed by dismissWindow no longer works as expected. Specifically, if the user moves the pushed window, then when the pushed window is later dismissed, the parent window's position isn't aligned with the pushed window's new position. Its original position is restored instead. Curiously, the bug only happens when an app is launched from the visionOS home view, and not when an app is launched from Xcode. It also doesn't happen in the visionOS 26.2 simulator. Another interesting detail is that while the parent window is hidden, if the user long-presses the Digital Crown and then dismisses the pushed window, the parent window's position seems to be immune from the Digital Crown scene reorientation. It's restored to its original real world position. Demo video: https://youtu.be/zR3t2ON3Wz0 I've submitted feedback as FB21287011 with a sample app and detailed repro steps. Has anyone else encountered this issue already and figured out a workaround? It would be nice if I could get pushWindow to work correctly in my app. Thanks everybody! 😀

In visionOS, is there a way to temporarily hide the window close/position handle at the bottom of a window? The Safari app does this, so it must be possible.

Every time I launch Xcode 26.0 (17A324), I see this window: Consequently, each time I launch Xcode, I must manually close the Downloads window, and it will always reappear the next time I launch Xcode. My question: How can I make the Downloads window with this message go away permanently, so I don't have to manually dismiss it? I tried deleting Device Support for Vision Pro (M5) and iPad Pro (M5) from Settings > Components, but unfortunately this is what I see: Thank you for any guidance you can provide.

RealityKit spatial audio crackles and pops on iOS 26.0 beta 5. It works correctly on iOS 18.6 and visionOS 26.0 beta 5. The APIs used are AudioPlaybackController, Entity.prepareAudio, Entity.play Videos of the expected and observed behavior are attached to the feedback FB19423059. The audio should be a consistent, repeating sound, but it seems oddly abbreviated and the volume varies unexpectedly. Thank you for investigating this issue.

In iPadOS 26.0 betas 1 through 5, the navigation bar can appear inset underneath the status bar (FB18241928) I submitted this bug in June with a sample project and repro steps, but I didn't get a response. Please let me know if there's anything else I can do to help. Thank you.

On iPadOS 26 beta, the navigation bar can appear inset underneath the status bar (FB18241928) This bug does not happen on iOS 18. This bug occurs when a full screen modal view controller without a status bar is presented, the device orientation changes, and then the full screen modal view controller is dismissed. This bug appears to happen only on iPad, and not on iPhone. This bug happens both in the simulator and on the device. Thank you for investigating this issue.