can i block number on my app with callkit if the number already exists as a contact? Or i can only block number that are not on the contact list ?

We are currently developing a VoIP application that supports Local Push extention. We discovered an issue with this app where the performEndCallAction response to reportCallWithUUID is occasionally slow.(See below for detail) It usually works without any issues, so we believe there is no problem with the app's processing flow. This issue only occurs very rarely, but each time it does there is a delay of about 60 seconds, which leads us to suspect that there is some kind of problem on the iOS side, and that fail-safe processing is occurring after 60 seconds. Do you know of a workaround for this issue?

I have tried multiple time through multiple channels and you have yet to respond to my request. I am developing an App on xcode APP Bundle ID: garymdmd.MediaPace Apple ID: 6740823496 Apple has granted me distribution use of the Family Control/Screentime module for my main app. According to your engineer's post here: https://developer.apple.com/forums/thread/764919 That permission should be extended to your extensions that are part of the app. When you try to setup the extension identifiers they do not show the "added capabilities" column that sow sup when getting permission for the main app so you are not able to endow the extension with these permissions which seem to be needed to work with the app. I am trying to add these bundle identifier extensions: garymdmd.MediaPace.ScreenTimeMonitorDuo garymdmd.MediaPace.DeviceActivityReport Can you please tell me how to get this to work or to add permissions to these extensions. I have sent in the request form multiple times (here - https://developer.apple.com/contact/request/family-controls-distribution) and Apple simply writes back that I have permission after a few weeks but nothing changes for the extension capabilities.

When the iPhone is set to 12-hour time format, obtaining a timestamp similar to "2025-07-18 16:29:00" fails

Hello, My app depends on the Translation framework (iOS 17.4+), but I've found out that it doesn't work unless the Apple Translate app is installed on the device. After I've deleted Apple's translation app, I started getting the following errors: Optional(Foundation.Locale.Language(components: Foundation.Locale.Language.Components(languageCode: Optional(en), script: nil, region: Optional(GB)))) Optional(Foundation.Locale.Language(components: Foundation.Locale.Language.Components(languageCode: Optional(es), script: nil, region: Optional(ES)))) Error sending 1 paragraphs Error Domain=TranslationErrorDomain Code=16 "Translation failed" UserInfo={NSLocalizedDescription=Translation failed, NSLocalizedFailureReason=Offline models not available for language pair} Failed to translate input 0; returning error: Error Domain=TranslationErrorDomain Code=16 "Translation failed" UserInfo={NSLocalizedDescription=Translation failed, NSLocalizedFailureReason=Offline models not available for language pair} Received unbridged NSError to API, converting to `.internalError`: Error Domain=TranslationErrorDomain Code=16 "Translation failed" UserInfo={NSLocalizedDescription=Translation failed, NSLocalizedFailureReason=Offline models not available for language pair} TranslationError(cause: Translation.TranslationError.Cause.internalError, sourceLanguage: nil, targetLanguage: nil) This is an example from trying to translate text from English to Spanish. And I was receiving the error even though I have the dictionaries downloaded. Once I reinstalled Apple's Translate app, it started working again. This sadly means that users of my app must have the factory translation app installed, otherwise they won't be able to use my app. Some people choose to delete the factory apps. Why is the framework not available then? :(

I’m creating an app with the Screen Time API and I would like to know how to make the app show a parental control editing view for parents and a view for child accounts that shows which apps are blocked. How can I do this?

I’m currently developing a spam number blocking app using CallKit. I’ve confirmed that up to iOS 26 beta 5, there is a bug where number blocking doesn’t work. In my current tests, the ringtone doesn’t sound and the blocking works fine, but the call still appears in the missed calls list, which is bothersome. If the bug is fixed in future versions (as it was in previous versions), is there a way to block the number so that it also does not appear in missed calls?

I am implementing the new Push to talk framework and I found an issue where channelManager(:didActivate:) is not called after I immediately return a NOT NIL activeRemoteParticipant from incomingPushResult. I have tested it and it could play the PTT audio in foreground and background. This issue is only occurring when I join the PTT Channel from the app foreground, then kill the app. The channel gets restored via channelDescriptor(restoredChannelUUID:). After the channel gets restored, I send PTT push. I can see that my device is receiving the incomingPushResult and returning the activeRemotePartipant and the notification panel is showing that A is speaking - but channelManager(:didActivate:) never gets called. Thus resulting in no audio being played. Rejoining the channel fixes the issue. And reopening the app also seems to fix the issue.

I’m hitting a WeatherKit JWT failure (WDSJWTAuthenticatorServiceListener Code = 2) at runtime even though the entitlement is present in both the signed binary and the embedded provisioning profile. Environment Team ID 5SZLQLQ9MD Bundle ID ParkProfessor.ParkProfessorDisneyland Device / OS iPhone 15 Pro · iOS 17.4.1 (hardware, not simulator) Xcode 15.3 (15E204a) Console output Failed to generate jwt token for: com.apple.weatherkit.authservice Error Domain=WeatherDaemon.WDSJWTAuthenticatorServiceListener.Errors Code=2 "(null)" Entitlement & profile snippets codesign -d --entitlements :- WeatherKitTest.app | grep -A2 weatherkit com.apple.developer.weatherkit security cms -D -i embedded.mobileprovision | grep -A2 weatherkit com.apple.developer.weatherkit What I’ve already tried Regenerated a new development certificate and a new iOS App Development provisioning profile with WeatherKit enabled. Confirmed the capability is selected in Certificates ▸ Identifiers ▸ Profiles and added in Xcode target settings. WeatherKit Terms of Service accepted in the portal. Deleted the app, removed any device management profiles, rebooted the phone, clean-built & ran again. Reproduced the issue in a minimal SwiftUI app that calls: WeatherService.shared.weather(for: CLLocation(latitude: 33.8121, longitude: -117.9190), including: .current) – same Code 2 error. Request It looks like the App ID may need a backend entitlement sync. Could someone from the WeatherKit team please check the status for Team 5SZLQLQ9MD, Bundle ID ParkProfessor.ParkProfessorDisneyland and enable WeatherKit token generation? Thanks!

Hello, I would like to retrieve Screen Time data in my iOS app for development purposes. I have read that access to Screen Time data may be possible if you are enrolled in the Apple Developer Program as an organization (enterprise membership), but not as an individual developer. Could anyone clarify the following points? Is it possible to access Screen Time data via API or framework as an individual developer? Is this functionality limited only to enterprise members, and if so, what are the requirements or procedures? Are there any official Apple documents or sample codes about this process? If anyone has experience or can share relevant links or advice, I would really appreciate it. Thank you in advance!

Hi all, I'm trying to set up universal links for my app but it's not working. What I want: cogover.com → Safari (website) - NOT my app *.cogover.com (any subdomain like abc.cogover.com) → My app What I did: Added applinks:*.cogover.com in Xcode Put AASA files on all subdomains They work fine (checked with curl) Problem: All links still open in Safari, not my app. I do not put AASA on my root domain cogover.com because I don't want open my app with root domain. I have checked TN3155: Debugging universal links | Apple Developer Documentation but it only say about universal link works with both root domain and subdomains. Weird thing I found: I checked how Salesforce does it - their *.force.com subdomains work perfectly. But when I tried to check their setup, (https://force.com/.well-known/apple-app-site-association) doesn't seem to exist either! So how does theirs work? Even stranger - Apple's CDN has their file cached at (https://app-site-association.cdn-apple.com/a/v1/force.com) but the actual domain doesn't serve it. Can Apple's CDN have a file cached even if it's not on the website anymore? Thanks for any help!

Hi, I have a released screentime app ScreenZen. The last few days I've seen a disturbing spike in bug reports coming from people with 17.4.1 and 17.5.1 phones with no update to the app itself. People reported they saw the issue immediately after updating their iOS version. Unfortunately it is not replicable on all phones with those versions, so we haven't been able to replicate it on our test phones. It appears the issue is the ApplicationToken passed into ShieldActionExtension and ShieldConfigurationExtension does not match any of the ApplicationTokens that the user selected to block through FamilyControls. (The selected ApplicationTokens are being loaded through a group UserDefaults and they are indeed being loaded in the ShieldActionExtension in the bug reports).This is preventing the app from loading the correct settings and handling the blocking accordingly. I am trying to isolate this better with a new release with better logging, but would appreciate any help on this issue.

I'm pretty excited for the all new iOS 26 redesign, but what I'm most excited for is the call screening feature to avoid unwanted calls. I downloaded the developer's beta on my secondary device to report bugs, but call screening doesn't work on it even though it's turned on. I already sent a feedback report, but I'm not sure if it's just a beta bug or that my iPhone won't support it. I haven't found much info about it. It's a 2nd gen SE. Thanks.

Hi all, I’m working on a Screen Time app using Managed Settings and ShieldConfiguration, and I’ve run into an issue where screen time is still being counted while the shield is shown — even when the user never interacts with the underlying app content. This happens both when I use the default shield and when I configure a custom ShieldConfiguration with a ShieldAction. As long as the shield is visible, the time appears to count toward the app’s usage. For example, if I leave the shield up for 20 minutes, Screen Time logs it as 20 minutes of app usage — even if no content is accessed behind the shield. Is this expected behavior? Is there a way to prevent Screen Time from counting time while the shield is shown? Any insights or workarounds would be greatly appreciated! Thanks, Connor

Hi, I have tried to add Eve energy plug but still pairing failed, it reported always same error. Error Domain=com.apple.MatterSupport Code=1 "(null)" Could anyone help? Regards

I want to create movie recommendation app with ability to instantly watch selected movie in Apple TV app. As it is possible to share link to content in Apple TV app I wonder can I use it in my own app? I mean legal issues at first.

We have an application which is written in Swift, which activates Transparent Proxy network extension. We are using Jamf MDM profile for deployment. To avoid the user deleting / disabling the extension from General -> LogIn Items & Extension -> Network Extensions screen, we are using "Non-removable system extensions from UI" attribute under Allowed System Extensions and Teams IDs section. In new Mac OS 26 (Tahoe), user can also enable/disable the extension from General -> LogIn Items & Extension -> Apps tab. The "Non-removable system extensions from UI" attribute set in Jamf MDM profile does not apply to this tab. Same attribute is working for General -> LogIn Items & Extension -> Extensions tab and there the slider is greyed out and Remove option is not available under more menu. Is there any new key/configuration defined to disable the slider from General -> LogIn Items & Extension -> Apps tab? Created https://feedbackassistant.apple.com/feedback/18198031 - FB18198031 feedback assistant ticket as well.

Hi, On iOS 26 beta, calls can no longer be reported by swiping left on a call. This is unfortunately a breaking change. I have submitted a report on this on June with Feedback Assistant: FB17893517 I hope it will get some more exposure by posting here.

Hello everyone, I’m working on an iOS app that uses the new DeviceActivity framework to monitor and report user screen‐time in an extension (DeviceActivityReportExtension). I need to persist my processed screen‐time data into a standalone SQLite database inside the extension, but I’m running into issues opening and writing to the database file. Here’s what I’ve tried so far: import UIKit import DeviceActivity import SQLite3 class DeviceActivityReportExtension: DeviceActivityReportExtension { private var db: OpaquePointer? override func didReceive(_ report: DeviceActivityReport) async { // 1. Construct path in app container: let containerURL = FileManager.default.containerURL(forSecurityApplicationGroupIdentifier: "group.com.mycompany.myapp") let dbURL = containerURL?.appendingPathComponent("ScreenTimeReports.db") // 2. Open database: if sqlite3_open(dbURL?.path, &db) != SQLITE_OK { print("❌ Unable to open database at \(dbURL?.path ?? "unknown path")") return } defer { sqlite3_close(db) } // 3. Create table if needed: let createSQL = """ CREATE TABLE IF NOT EXISTS reports ( id INTEGER PRIMARY KEY AUTOINCREMENT, date TEXT, totalScreenTime DOUBLE ); """ if sqlite3_exec(db, createSQL, nil, nil, nil) != SQLITE_OK { print("❌ Could not create table: \(String(cString: sqlite3_errmsg(db)))") return } // 4. Insert data: let insertSQL = "INSERT INTO reports (date, totalScreenTime) VALUES (?, ?);" var stmt: OpaquePointer? if sqlite3_prepare_v2(db, insertSQL, -1, &stmt, nil) == SQLITE_OK { sqlite3_bind_text(stmt, 1, report.date.description, -1, nil) sqlite3_bind_double(stmt, 2, report.totalActivityDuration) if sqlite3_step(stmt) != SQLITE_DONE { print("❌ Insert failed: \(String(cString: sqlite3_errmsg(db)))") } } sqlite3_finalize(stmt) } } However: Path issues: The extension’s sandbox is separate from the app’s. I’m not sure if I can use the same App Group container, or if there’s a better location for an on‐extension database. Entitlements: I’ve added the App Group (group.com.mycompany.myapp) to both the main app and the extension, but the file never appears, and I still get “unable to open database” errors. My questions are: How do I correctly construct a file URL for an SQLite file in a DeviceActivityReportExtension? Is SQLite the recommended approach here, or is there a more “Apple-approved” pattern for writing data from a DeviceActivity extension? Any sample code snippets, pointers to relevant Apple documentation, or alternative approaches would be greatly appreciated!

When fetching Apple Savings transactions via FinanceKit, the data is missing key context about where the deposit originated from. Here’s an example transaction I retrieved: Transaction( id: 77371A0C-7122-42C7-BEBC-85BDF654AD2B, accountID: 68D9FE9D-6DA6-4A27-BB9D-19209CD29A56, transactionAmount: 1.46 USD, creditDebitIndicator: .credit, transactionDescription: "Deposit", originalTransactionDescription: "", merchantCategoryCode: nil, merchantName: nil, transactionType: .deposit, status: .booked, transactionDate: 2025-08-20 13:44:26 +0000, postedDate: 2025-08-20 13:44:26 +0000 ) As shown: transactionDescription is just "Deposit" merchantName is nil No indication of the source account In contrast, the Wallet app clearly shows context for Apple Savings account deposits, such as: "Apple Card" (daily cash) "Bank of America" (external transfer) "Interest Paid" (we do see "Interest" come through correctly) Without this metadata, third-party apps cannot replicate Wallet’s clarity about where a deposit came from. Every deposit simply appears as "Deposit", which is ambiguous. Request: Please expose additional metadata for Apple Savings account transactions, for example: sourceAccountName (e.g. “Apple Card” or “Bank of America”) transactionOriginType (cashback, external bank transfer, interest) institutionIdentifier or similar for external banks This would allow developers to show clear, Wallet-quality transaction details and avoid confusing users. Impact: The lack of source info makes Savings deposits nearly indistinguishable from one another, even though Wallet provides this context. For apps leveraging FinanceKit, this results in a poorer experience compared to Apple’s own Wallet. Thanks!