Networking

RSS for tag

Explore the networking protocols and technologies used by the device to connect to Wi-Fi networks, Bluetooth devices, and cellular data services.

Networking Documentation

Posts under Networking subtopic

Post

Replies

Boosts

Views

Created

ipad通过转接口连接上有线网络之后,部分设备无法获取到IP地址
private static func getEthernetIPAddress(from interfaces: [String: String]) -> String? { // 常见虚拟以太网接口名(根据适配器型号可能不同) let poeEthernetInterfaces = ["en2", "en3", "en4", "en5", "eth0", "eth1"] for interfaceName in poeEthernetInterfaces { if let ethernetIP = interfaces[interfaceName], !ethernetIP.isEmpty { return ethernetIP } } return nil }//我们通过该方法去抓取有线网的IP地址,但是有的设备无法抓取到,怎样才能更准确的抓取到有线网络的IP地址
1
0
160
Dec ’25
Once started, NWPathMonitor appears to be kept alive until cancelled, but is this documented?
NWPathMonitor appears to retain itself (or is retained by some internal infrastructure) once it has been started until cancelled. This seems like it can lead to memory leaks if the references to to the monitor are dropped. Is this behavior documented anywhere? func nwpm_self_retain() { weak var weakRef: NWPathMonitor? autoreleasepool { let monitor: NWPathMonitor = NWPathMonitor() weakRef = monitor monitor.start(queue: .main) // monitor.cancel() // assertion fails unless this is called } assert(weakRef == nil) } nwpm_self_retain()
3
0
150
Dec ’25
MultiPeer Connectivity: Device discovery succeeds but handshake fails when off-network
Hi, I am building an app that depends on multiple iOS devices connecting to a designated "coordinator" iOS device. I am using MPC, and it works great when the devices are connected to the same WiFi AP, with virtually 100% connection success. My definition of success is a near instant detection of available devices, >95% connection success rate, and a stable ongoing connection with no unexpected disconnects. The issue arises when the devices are not connected to the same WiFi network (or connected to no network with WiFi and bluetooth still on). Devices detect each other immediately, but when initiating a connection, both devices initiate a handshake, but the connection is not successful. In the few times where the connection succeeds, the connection quality is high, stable, and doesn't drop. Is this a known limitation of the framework? Could I be doing something wrong in my implementation?
1
0
243
Dec ’25
`setTunnelNetworkSettings` errors in a packet tunnel provider.
We've received logs and have spuriously reproduced the following behavior: calls to setTunnelNetworkSettings completing with NETunnelProviderError where the code is networkSettingsInvalid, and the error domain string is empty. After subsequent calls to setTunnelNetworkSettings, the tunnel is stopped via the userInitiated stop reason within around 1 second from the first failure. This happens after a number of successful calls to setTunnelNetworkSettings have been made in the lifetime of a given packet tunnel process. We can confirm that no user ever initiates the disconnection. We can confirm that the only significant changes between the different calls to setTunnelNetworkSettings are that the parameters contain different private IPs for the tunnel settings - the routes and DNS settings remain the same. In our limited testing, it seems that we can replicate the behavior we're observing by removing the VPN profile while the tunnel is up. However, we are certain the same behavior happens under other circumstances without any user interaction. Is this what memory starvation looks like? Or is this something else? Our main concern is that the tunnel is killed and it is not brought back up even though our profile is set to be on-demand. It's difficult to give any promises about leaks to our users if the tunnel can be killed at any point and not be brought back. The spurious disconnections are a security issue for our app, we'd like to know if there's anything we can do differently so that this does not happen. We tried to get DTS, but given that we have no way to reproduce this issue with a minimal project. But we can reproduce the behavior (kill the tunnel by removing it's profile) from a minimal Xcode project, is that considered good enough for a reproduction?
1
0
180
Dec ’25
Issues Generating Bloom Filters for Apple NetworkExtension URL Filtering
Hi there, We have been trying to set up URL filtering for our app but have run into a wall with generating the bloom filter. Firstly, some context about our set up: OHTTP handlers Uses pre-warmed lambdas to expose the gateway and the configs endpoints using the javascript libary referenced here - https://developers.cloudflare.com/privacy-gateway/get-started/#resources Status = untested We have not yet got access to Apples relay servers PIR service We run the PIR service through AWS ECS behind an ALB The container clones the following repo https://github.com/apple/swift-homomorphic-encryption, outside of config changes, we do not have any custom functionality Status = working From the logs, everything seems to be working here because it is responding to queries when they are sent, and never blocking anything it shouldn’t Bloom filter generation We generate a bloom filter from the following url list: https://example.com http://example.com example.com Then we put the result into the url filtering example application from here - https://developer.apple.com/documentation/networkextension/filtering-traffic-by-url The info generated from the above URLs is: { "bits": 44, "hashes": 11, "seed": 2538058380, "content": "m+yLyZ4O" } Status = broken We think this is broken because we are getting requests to our PIR server for every single website we visit We would have expected to only receive requests to the PIR server when going to example.com because it’s in our block list It’s possible that behind the scenes Apple runs sporadically makes requests regardless of the bloom filter result, but that isn’t what we’d expect We are generating our bloom filter in the following way: We double hash the URL using fnv1a for the first, and murmurhash3 for the second hashTwice(value: any, seed?: any): any { return { first: Number(fnv1a(value, { size: 32 })), second: murmurhash3(value, seed), }; } We calculate the index positions from the following function/formula , as seen in https://github.com/ameshkov/swift-bloom/blob/master/Sources/BloomFilter/BloomFilter.swift#L96 doubleHashing(n: number, hashA: number, hashB: number, size: number): number { return Math.abs((hashA + n * hashB) % size); } Questions: What hashing algorithms are used and can you link an implementation that you know is compatible with Apple’s? How are the index positions calculated from the iteration number, the size, and the hash results? There was mention of a tool for generating a bloom filter that could be used for Apple’s URL filtering implementation, when can we expect the release of this tool?
3
0
352
Dec ’25
Content filtering
Hello team, Would this mean that content filters intended for all browsing can only be implemented for managed devices using MDM? My goal would be to create a content filtering app for all users, regardless of if their device is managed/supervised. thanks.
1
0
110
Dec ’25
FYI: Network System extension, macOS update issue, loss of networking
This is just an FYI in case someone else runs into this problem. This afternoon (12 Dec 2025), I updated to macOS 26.2 and lost my network. The System Settings' Wi-Fi light was green and said it was connected, but traceroute showed "No route to host". I turned Wi-Fi on & off. I rebooted the Mac. I rebooted the eero network. I switched to tethering to my iPhone. I switched to physical ethernet cable. Nothing worked. Then I remembered I had a beta of an app with a network system extension that was distributed through TestFlight. I deleted the app, and networking came right back. I had this same problem ~2 years ago. Same story: app with network system extension + TestFlight + macOS update = lost network. (My TestFlight build might have expired, but I'm not certain) I don't know if anyone else has had this problem, but I thought I'd share this in case it helps.
2
0
277
Dec ’25
mDNSResponder: legacy OpenSSL licence
Hello, I’m reviewing the open-source mDNSResponder repository and have a question regarding licensing/provenance in mDNSCore/DNSDigest.c file. That file contains an embedded notice stating that parts of the MD5/digest implementation were derived from older OpenSSL sources and therefore include the legacy OpenSSL/SSLeay license text, even though OpenSSL itself is now Apache-2.0 starting from version 3.0. The legacy OpenSSL/SSLeay license is widely understood to impose additional attribution and notice requirements compared to Apache-2.0, and some downstream projects prefer to avoid it when a permissively licensed alternative is available. Repository: https://github.com/apple-oss-distributions/mDNSResponder File: https://github.com/apple-oss-distributions/mDNSResponder/blob/main/mDNSCore/DNSDigest.c#L66 I’d like to clarify a few points: Is the MD5/digest code in DNSDigest.c still based on pre–OpenSSL-3.0 sources, such that retaining the legacy OpenSSL/SSLeay license block is intentional and required? If the goal were to simplify licensing (Apache-2.0 only), would Apple consider replacing this MD5 implementation with an Apache-2.0–licensed alternative (for example, code derived from OpenSSL 3.x or another permissive implementation)? Are there any technical or policy reasons (compatibility, crypto policy, platform APIs) that make such a replacement undesirable? Since GitHub issues and PRs are restricted for this repository, I’m asking here for guidance. If maintainers agree that such an update would be useful, I’d be happy to help by preparing a PR for review. I've also created a feedback report for this topic, the reference ID is FB21269078. Thanks for any clarification.
2
0
171
Dec ’25
macOS Network Extension deactivation fails with authorizationRequired
Hello, I have a .app that runs as LaunchDaemon and configured to be an Agent (LSUIElement) that is stored in /Applications. Installing network extensions works, but deactivation fails with OSSystemExtensionErrorDomain error 13 (authorization required). requestNeedsUserApproval is not called for deactivation, but it's called when being activated. Any ideas? Thank you! P.S. It works on Debug, just not on Release...
3
0
219
Dec ’25
Content & URL filtering
Hello team, I am developing a security app where I am denying certain flows/packets if the are communicating with known malicious endpoints. Therefore I want to make use of NetworkExtensions such as the new URLFilter or ContentFilter (NEURLFilterManager, NEFilterDataProvider, NEFilterControlProvider). Does NEURLFilterManager require the user's device to be at a minimun of ios 26? Does any of these APIs/Extensions require the device to be managed/supervised or can it be released to all consumers? Thanks,
4
0
151
Dec ’25
How to set the custom DNS with the Network client
We are facing a DNS resolution issue with a specific ISP, where our domain name does not resolve correctly using the system DNS. However, the same domain works as expected when a custom DNS resolver is used. On Android, this is straightforward to handle by configuring a custom DNS implementation using OkHttp / Retrofit. I am trying to implement a functionally equivalent solution in native iOS (Swift / SwiftUI). **Android Reference (Working Behavior) : ** val dns = DnsOverHttps.Builder() .client(OkHttpClient()) .url("https://cloudflare-dns.com/dns-query".toHttpUrl()) .bootstrapDnsHosts(InetAddress.getByName("1.1.1.1")).build() OkHttpClient.Builder().dns(dns).build() **Attempted iOS Approach ** I attempted the following approach : Resolve the domain to an IP address programmatically (using DNS over HTTPS) Connect directly to the resolved IP address Set the original domain in the Host HTTP header **DNS Resolution via DoH : ** func resolveDomain(domain: String) async throws -> String { guard let url = URL( string: "https://cloudflare-dns.com/dns-query?name=\(domain)&type=A" ) else { throw URLError(.badURL) } var request = URLRequest(url: url) request.setValue("application/dns-json", forHTTPHeaderField: "accept") let (data, _) = try await URLSession.shared.data(for: request) let response = try JSONDecoder().decode(DNSResponse.self, from: data) guard let ip = response.Answer?.first?.data else { throw URLError(.cannotFindHost) } return ip } **API Call Using Resolved IP : ** func callAPIUsingCustomDNS() async throws { let ip = try await resolveDomain(domain: "example.com") guard let url = URL(string: "https://\(ip)") else { throw URLError(.badURL) } let configuration = URLSessionConfiguration.ephemeral let session = URLSession( configuration: configuration, delegate: CustomURLSessionDelegate(originalHost: "example.com"), delegateQueue: .main ) var request = URLRequest(url: url) request.setValue("example.com", forHTTPHeaderField: "Host") let (_, response) = try await session.data(for: request) print("Success: \(response)") } **Problem Encountered ** When connecting via the IP address, the TLS handshake fails with the following error: Error Domain=NSURLErrorDomain Code=-1200 "A TLS error caused the secure connection to fail." This appears to happen because iOS sends the IP address as the Server Name Indication (SNI) during the TLS handshake, while the server’s certificate is issued for the domain name. **Custom URLSessionDelegate Attempt : ** class CustomURLSessionDelegate: NSObject, URLSessionDelegate { let originalHost: String init(originalHost: String) { self.originalHost = originalHost } func urlSession( _ session: URLSession, didReceive challenge: URLAuthenticationChallenge, completionHandler: @escaping (URLSession.AuthChallengeDisposition, URLCredential?) -> Void ) { guard challenge.protectionSpace.authenticationMethod == NSURLAuthenticationMethodServerTrust, let serverTrust = challenge.protectionSpace.serverTrust else { completionHandler(.performDefaultHandling, nil) return } let sslPolicy = SecPolicyCreateSSL(true, originalHost as CFString) let basicPolicy = SecPolicyCreateBasicX509() SecTrustSetPolicies(serverTrust, [sslPolicy, basicPolicy] as CFArray) var error: CFError? if SecTrustEvaluateWithError(serverTrust, &error) { completionHandler(.useCredential, URLCredential(trust: serverTrust)) } else { completionHandler(.cancelAuthenticationChallenge, nil) } } } However, TLS validation still fails because the SNI remains the IP address, not the domain. I would appreciate guidance on the supported and App Store–compliant way to handle ISP-specific DNS resolution issues on iOS. If custom DNS or SNI configuration is not supported, what alternative architectural approaches are recommended by Apple?
1
0
330
Dec ’25
How to set the custom DNS with the Network client
We are facing a DNS resolution issue with a specific ISP, where our domain name does not resolve correctly using the system DNS. However, the same domain works as expected when a custom DNS resolver is used. On Android, this is straightforward to handle by configuring a custom DNS implementation using OkHttp / Retrofit. I am trying to implement a functionally equivalent solution in native iOS (Swift / SwiftUI). Android Reference (Working Behavior) : val dns = DnsOverHttps.Builder() .client(OkHttpClient()) .url("https://cloudflare-dns.com/dns-query".toHttpUrl()) .bootstrapDnsHosts(InetAddress.getByName("1.1.1.1")) .build() OkHttpClient.Builder() .dns(dns) .build() Attempted iOS Approach I attempted the following approach : Resolve the domain to an IP address programmatically (using DNS over HTTPS) Connect directly to the resolved IP address Set the original domain in the Host HTTP header DNS Resolution via DoH : func resolveDomain(domain: String) async throws -> String {     guard let url = URL(         string: "https://cloudflare-dns.com/dns-query?name=\(domain)&type=A"     ) else {         throw URLError(.badURL)     }     var request = URLRequest(url: url)     request.setValue("application/dns-json", forHTTPHeaderField: "accept")     let (data, _) = try await URLSession.shared.data(for: request)     let response = try JSONDecoder().decode(DNSResponse.self, from: data)     guard let ip = response.Answer?.first?.data else {         throw URLError(.cannotFindHost)     }     return ip } API Call Using Resolved IP :  func callAPIUsingCustomDNS() async throws {     let ip = try await resolveDomain(domain: "example.com")     guard let url = URL(string: "https://(ip)") else {         throw URLError(.badURL)     }     let configuration = URLSessionConfiguration.ephemeral     let session = URLSession(         configuration: configuration,         delegate: CustomURLSessionDelegate(originalHost: "example.com"),         delegateQueue: .main     )     var request = URLRequest(url: url)     request.setValue("example.com", forHTTPHeaderField: "Host")     let (_, response) = try await session.data(for: request)     print("Success: (response)") } Problem Encountered When connecting via the IP address, the TLS handshake fails with the following error: Error Domain=NSURLErrorDomain Code=-1200 "A TLS error caused the secure connection to fail." This appears to happen because iOS sends the IP address as the Server Name Indication (SNI) during the TLS handshake, while the server’s certificate is issued for the domain name. Custom URLSessionDelegate Attempt :  class CustomURLSessionDelegate: NSObject, URLSessionDelegate {     let originalHost: String     init(originalHost: String) {         self.originalHost = originalHost     }     func urlSession(         _ session: URLSession,         didReceive challenge: URLAuthenticationChallenge,         completionHandler: @escaping (URLSession.AuthChallengeDisposition, URLCredential?) -> Void     ) {         guard challenge.protectionSpace.authenticationMethod == NSURLAuthenticationMethodServerTrust,               let serverTrust = challenge.protectionSpace.serverTrust else {             completionHandler(.performDefaultHandling, nil)             return         }         let sslPolicy = SecPolicyCreateSSL(true, originalHost as CFString)         let basicPolicy = SecPolicyCreateBasicX509()         SecTrustSetPolicies(serverTrust, [sslPolicy, basicPolicy] as CFArray)         var error: CFError?         if SecTrustEvaluateWithError(serverTrust, &error) {             completionHandler(.useCredential, URLCredential(trust: serverTrust))         } else {             completionHandler(.cancelAuthenticationChallenge, nil)         }     } } However, TLS validation still fails because the SNI remains the IP address, not the domain. I would appreciate guidance on the supported and App Store–compliant way to handle ISP-specific DNS resolution issues on iOS. If custom DNS or SNI configuration is not supported, what alternative architectural approaches are recommended by Apple?
1
0
254
Dec ’25
iPhone 17 Cellular Network performance is getting worse than the previous device models
Recent our APP performance online has revealed significant degradation in cellular network SRTT (Smoothed Round-Trip Time) on the latest iPhone models (iPhone 18.1, 18.2, and 18.3) relative to previous generation devices. IDC network transmission SRTT P50 increased by 10.64%, P95 increased by 103.41%; CDN network transmission SRTT P50 increased by 12.66%, P95 increased by 81.08%. Detailed Performance Metrics: 1. Network Transmission SRTT Degradation Following optimization of our APP's network library, iOS network transmission SRTT showed improvement from mid-August through mid-September. However, starting September 16, cellular network SRTT metrics began to degrade (SRTT increased). This degradation affects both IDC and CDN routes. WiFi network performance remains unaffected. 2. Excluding iOS 26.x Version Data After data filtering, we discovered that the increase in iOS cellular network transmission SRTT was caused by data samples from iOS 26.x versions. When excluding iOS 26.x version data, network transmission SRTT shows no growth. 3. Comparative Analysis: iOS 26.x vs. iOS < 26.0 network transmission SRTT shows: IDC (Internet Data Center) Links: P50 latency: 10.64% increase / P95 latency: 103.41% increase CDN (Content Delivery Network) Links: P50 latency: 12.66% increase / P95 latency: 81.08% increase 4. Device-Model Analysis: iOS 26.x SRTT Degradation Scope Granular analysis of iOS 26.x samples across different device models reveals that network SRTT degradation is not universal but rather specific to certain iPhone models. These measurements indicate a substantial regression in network performance across both data center and content delivery pathways.
1
0
202
Dec ’25
iOS doesn’t switch back to home router + socket connect failure in AP mode
In iOS AP-mode onboarding for IOT devices, why does the iPhone sometimes stay stuck on the device Wi-Fi (no internet) and fail to route packets to the device’s local IP, even though SSID is correct? Sub-questions to include: • Is this an iOS Wi-Fi auto-join priority issue? • Can AP networks become “sticky” after multiple joins? • How does iOS choose the active routing interface when Wi-Fi has no gateway? • Why does the packet never reach the device even though NWPath shows WiFi = satisfied?
1
0
162
Dec ’25
Multipeer Communication via Bluetooth Only
Hi Team, We have a requirement for device-to-device communication using the Multipeer Connectivity framework without requiring Wi- Fi connectivity. Current Status: Multipeer communication works successfully when Wi-Fi is enabled Connection fails when using Bluetooth-only (Wi-Fi disabled, in Airplane Mode) Concern: We've found forum suggesting that Multipeer Connectivity over Bluetooth-only has been restricted since iOS 11, despite Apple's documentation stating support for both Wi-Fi and Bluetooth transports. Request: Could you please confirm: Whether Bluetooth-only Multipeer Connectivity is officially supported in current iOS versions( iOS 18.0+)? If there are specific configurations or entitlements required for Bluetooth-only operation? Any known limitations or alternative approaches for offline device-to-device communication? This clarification will help us determine the appropriate implementation strategy for our offline communication requirements. Thank you.
3
0
268
Dec ’25
Why nslookup dns queries not routed to NETransparentProxyProvider
I’m using an NETransparentProxyProvider where I add UDP-53 rules to intercept DNS queries from a private application. These queries are resolved locally on the endpoint by returning a custom DNS response. Example Rules look like this: NENetworkRule(destinationHost: NWHostEndpoint(hostname: "mypaapp.com", port: 53),protocol:.UDP) This works as expected through browser and ping. handleNewUDPFlow/handleNewFlow with NEAppProxyUDPFlow gets called where custom dns response get written. Using nslookup mypaapp.com doesn't works. Why does this behaves differently for nslookup?
1
0
129
Dec ’25
How to add more cipher suites
I want to add more cipher suites. I use NWConnection to make a connection. Before I use sec_protocol_options_append_tls_ciphersuite method to add more cipher suites, I found that Apple provided 20 cipher suites shown in the client hello packet. But after I added three more cipher suites, I found that nothing changed, and still original 20 cipher suites shown in the client hello packet when I made a new connection. The following is the code about connection. I want to add three more cipher suites: tls_ciphersuite_t.ECDHE_ECDSA_WITH_AES_128_CBC_SHA256, tls_ciphersuite_t.ECDHE_ECDSA_WITH_AES_256_CBC_SHA384, tls_ciphersuite_t.ECDHE_RSA_WITH_AES_256_CBC_SHA384 Can you give me some advice about how to add more cipher suites? Thanks. By the way, I working on a MacOS app. Xcode version: 16 MacOS version: 15.6
1
0
196
Dec ’25
ipad通过转接口连接上有线网络之后,部分设备无法获取到IP地址
private static func getEthernetIPAddress(from interfaces: [String: String]) -> String? { // 常见虚拟以太网接口名(根据适配器型号可能不同) let poeEthernetInterfaces = ["en2", "en3", "en4", "en5", "eth0", "eth1"] for interfaceName in poeEthernetInterfaces { if let ethernetIP = interfaces[interfaceName], !ethernetIP.isEmpty { return ethernetIP } } return nil }//我们通过该方法去抓取有线网的IP地址,但是有的设备无法抓取到,怎样才能更准确的抓取到有线网络的IP地址
Replies
1
Boosts
0
Views
160
Activity
Dec ’25
How can I get the last Wi-Fi disconnection reason ?
I want to know the reason for last Wi-Fi disconnection. It would be helpful to that I can get the reason-code received from the access point.
Replies
1
Boosts
0
Views
86
Activity
Dec ’25
Once started, NWPathMonitor appears to be kept alive until cancelled, but is this documented?
NWPathMonitor appears to retain itself (or is retained by some internal infrastructure) once it has been started until cancelled. This seems like it can lead to memory leaks if the references to to the monitor are dropped. Is this behavior documented anywhere? func nwpm_self_retain() { weak var weakRef: NWPathMonitor? autoreleasepool { let monitor: NWPathMonitor = NWPathMonitor() weakRef = monitor monitor.start(queue: .main) // monitor.cancel() // assertion fails unless this is called } assert(weakRef == nil) } nwpm_self_retain()
Replies
3
Boosts
0
Views
150
Activity
Dec ’25
MultiPeer Connectivity: Device discovery succeeds but handshake fails when off-network
Hi, I am building an app that depends on multiple iOS devices connecting to a designated "coordinator" iOS device. I am using MPC, and it works great when the devices are connected to the same WiFi AP, with virtually 100% connection success. My definition of success is a near instant detection of available devices, >95% connection success rate, and a stable ongoing connection with no unexpected disconnects. The issue arises when the devices are not connected to the same WiFi network (or connected to no network with WiFi and bluetooth still on). Devices detect each other immediately, but when initiating a connection, both devices initiate a handshake, but the connection is not successful. In the few times where the connection succeeds, the connection quality is high, stable, and doesn't drop. Is this a known limitation of the framework? Could I be doing something wrong in my implementation?
Replies
1
Boosts
0
Views
243
Activity
Dec ’25
`setTunnelNetworkSettings` errors in a packet tunnel provider.
We've received logs and have spuriously reproduced the following behavior: calls to setTunnelNetworkSettings completing with NETunnelProviderError where the code is networkSettingsInvalid, and the error domain string is empty. After subsequent calls to setTunnelNetworkSettings, the tunnel is stopped via the userInitiated stop reason within around 1 second from the first failure. This happens after a number of successful calls to setTunnelNetworkSettings have been made in the lifetime of a given packet tunnel process. We can confirm that no user ever initiates the disconnection. We can confirm that the only significant changes between the different calls to setTunnelNetworkSettings are that the parameters contain different private IPs for the tunnel settings - the routes and DNS settings remain the same. In our limited testing, it seems that we can replicate the behavior we're observing by removing the VPN profile while the tunnel is up. However, we are certain the same behavior happens under other circumstances without any user interaction. Is this what memory starvation looks like? Or is this something else? Our main concern is that the tunnel is killed and it is not brought back up even though our profile is set to be on-demand. It's difficult to give any promises about leaks to our users if the tunnel can be killed at any point and not be brought back. The spurious disconnections are a security issue for our app, we'd like to know if there's anything we can do differently so that this does not happen. We tried to get DTS, but given that we have no way to reproduce this issue with a minimal project. But we can reproduce the behavior (kill the tunnel by removing it's profile) from a minimal Xcode project, is that considered good enough for a reproduction?
Replies
1
Boosts
0
Views
180
Activity
Dec ’25
Issues Generating Bloom Filters for Apple NetworkExtension URL Filtering
Hi there, We have been trying to set up URL filtering for our app but have run into a wall with generating the bloom filter. Firstly, some context about our set up: OHTTP handlers Uses pre-warmed lambdas to expose the gateway and the configs endpoints using the javascript libary referenced here - https://developers.cloudflare.com/privacy-gateway/get-started/#resources Status = untested We have not yet got access to Apples relay servers PIR service We run the PIR service through AWS ECS behind an ALB The container clones the following repo https://github.com/apple/swift-homomorphic-encryption, outside of config changes, we do not have any custom functionality Status = working From the logs, everything seems to be working here because it is responding to queries when they are sent, and never blocking anything it shouldn’t Bloom filter generation We generate a bloom filter from the following url list: https://example.com http://example.com example.com Then we put the result into the url filtering example application from here - https://developer.apple.com/documentation/networkextension/filtering-traffic-by-url The info generated from the above URLs is: { "bits": 44, "hashes": 11, "seed": 2538058380, "content": "m+yLyZ4O" } Status = broken We think this is broken because we are getting requests to our PIR server for every single website we visit We would have expected to only receive requests to the PIR server when going to example.com because it’s in our block list It’s possible that behind the scenes Apple runs sporadically makes requests regardless of the bloom filter result, but that isn’t what we’d expect We are generating our bloom filter in the following way: We double hash the URL using fnv1a for the first, and murmurhash3 for the second hashTwice(value: any, seed?: any): any { return { first: Number(fnv1a(value, { size: 32 })), second: murmurhash3(value, seed), }; } We calculate the index positions from the following function/formula , as seen in https://github.com/ameshkov/swift-bloom/blob/master/Sources/BloomFilter/BloomFilter.swift#L96 doubleHashing(n: number, hashA: number, hashB: number, size: number): number { return Math.abs((hashA + n * hashB) % size); } Questions: What hashing algorithms are used and can you link an implementation that you know is compatible with Apple’s? How are the index positions calculated from the iteration number, the size, and the hash results? There was mention of a tool for generating a bloom filter that could be used for Apple’s URL filtering implementation, when can we expect the release of this tool?
Replies
3
Boosts
0
Views
352
Activity
Dec ’25
Content filtering
Hello team, Would this mean that content filters intended for all browsing can only be implemented for managed devices using MDM? My goal would be to create a content filtering app for all users, regardless of if their device is managed/supervised. thanks.
Replies
1
Boosts
0
Views
110
Activity
Dec ’25
FYI: Network System extension, macOS update issue, loss of networking
This is just an FYI in case someone else runs into this problem. This afternoon (12 Dec 2025), I updated to macOS 26.2 and lost my network. The System Settings' Wi-Fi light was green and said it was connected, but traceroute showed "No route to host". I turned Wi-Fi on & off. I rebooted the Mac. I rebooted the eero network. I switched to tethering to my iPhone. I switched to physical ethernet cable. Nothing worked. Then I remembered I had a beta of an app with a network system extension that was distributed through TestFlight. I deleted the app, and networking came right back. I had this same problem ~2 years ago. Same story: app with network system extension + TestFlight + macOS update = lost network. (My TestFlight build might have expired, but I'm not certain) I don't know if anyone else has had this problem, but I thought I'd share this in case it helps.
Replies
2
Boosts
0
Views
277
Activity
Dec ’25
mDNSResponder: legacy OpenSSL licence
Hello, I’m reviewing the open-source mDNSResponder repository and have a question regarding licensing/provenance in mDNSCore/DNSDigest.c file. That file contains an embedded notice stating that parts of the MD5/digest implementation were derived from older OpenSSL sources and therefore include the legacy OpenSSL/SSLeay license text, even though OpenSSL itself is now Apache-2.0 starting from version 3.0. The legacy OpenSSL/SSLeay license is widely understood to impose additional attribution and notice requirements compared to Apache-2.0, and some downstream projects prefer to avoid it when a permissively licensed alternative is available. Repository: https://github.com/apple-oss-distributions/mDNSResponder File: https://github.com/apple-oss-distributions/mDNSResponder/blob/main/mDNSCore/DNSDigest.c#L66 I’d like to clarify a few points: Is the MD5/digest code in DNSDigest.c still based on pre–OpenSSL-3.0 sources, such that retaining the legacy OpenSSL/SSLeay license block is intentional and required? If the goal were to simplify licensing (Apache-2.0 only), would Apple consider replacing this MD5 implementation with an Apache-2.0–licensed alternative (for example, code derived from OpenSSL 3.x or another permissive implementation)? Are there any technical or policy reasons (compatibility, crypto policy, platform APIs) that make such a replacement undesirable? Since GitHub issues and PRs are restricted for this repository, I’m asking here for guidance. If maintainers agree that such an update would be useful, I’d be happy to help by preparing a PR for review. I've also created a feedback report for this topic, the reference ID is FB21269078. Thanks for any clarification.
Replies
2
Boosts
0
Views
171
Activity
Dec ’25
macOS Network Extension deactivation fails with authorizationRequired
Hello, I have a .app that runs as LaunchDaemon and configured to be an Agent (LSUIElement) that is stored in /Applications. Installing network extensions works, but deactivation fails with OSSystemExtensionErrorDomain error 13 (authorization required). requestNeedsUserApproval is not called for deactivation, but it's called when being activated. Any ideas? Thank you! P.S. It works on Debug, just not on Release...
Replies
3
Boosts
0
Views
219
Activity
Dec ’25
Content & URL filtering
Hello team, I am developing a security app where I am denying certain flows/packets if the are communicating with known malicious endpoints. Therefore I want to make use of NetworkExtensions such as the new URLFilter or ContentFilter (NEURLFilterManager, NEFilterDataProvider, NEFilterControlProvider). Does NEURLFilterManager require the user's device to be at a minimun of ios 26? Does any of these APIs/Extensions require the device to be managed/supervised or can it be released to all consumers? Thanks,
Replies
4
Boosts
0
Views
151
Activity
Dec ’25
How to set the custom DNS with the Network client
We are facing a DNS resolution issue with a specific ISP, where our domain name does not resolve correctly using the system DNS. However, the same domain works as expected when a custom DNS resolver is used. On Android, this is straightforward to handle by configuring a custom DNS implementation using OkHttp / Retrofit. I am trying to implement a functionally equivalent solution in native iOS (Swift / SwiftUI). **Android Reference (Working Behavior) : ** val dns = DnsOverHttps.Builder() .client(OkHttpClient()) .url("https://cloudflare-dns.com/dns-query".toHttpUrl()) .bootstrapDnsHosts(InetAddress.getByName("1.1.1.1")).build() OkHttpClient.Builder().dns(dns).build() **Attempted iOS Approach ** I attempted the following approach : Resolve the domain to an IP address programmatically (using DNS over HTTPS) Connect directly to the resolved IP address Set the original domain in the Host HTTP header **DNS Resolution via DoH : ** func resolveDomain(domain: String) async throws -> String { guard let url = URL( string: "https://cloudflare-dns.com/dns-query?name=\(domain)&type=A" ) else { throw URLError(.badURL) } var request = URLRequest(url: url) request.setValue("application/dns-json", forHTTPHeaderField: "accept") let (data, _) = try await URLSession.shared.data(for: request) let response = try JSONDecoder().decode(DNSResponse.self, from: data) guard let ip = response.Answer?.first?.data else { throw URLError(.cannotFindHost) } return ip } **API Call Using Resolved IP : ** func callAPIUsingCustomDNS() async throws { let ip = try await resolveDomain(domain: "example.com") guard let url = URL(string: "https://\(ip)") else { throw URLError(.badURL) } let configuration = URLSessionConfiguration.ephemeral let session = URLSession( configuration: configuration, delegate: CustomURLSessionDelegate(originalHost: "example.com"), delegateQueue: .main ) var request = URLRequest(url: url) request.setValue("example.com", forHTTPHeaderField: "Host") let (_, response) = try await session.data(for: request) print("Success: \(response)") } **Problem Encountered ** When connecting via the IP address, the TLS handshake fails with the following error: Error Domain=NSURLErrorDomain Code=-1200 "A TLS error caused the secure connection to fail." This appears to happen because iOS sends the IP address as the Server Name Indication (SNI) during the TLS handshake, while the server’s certificate is issued for the domain name. **Custom URLSessionDelegate Attempt : ** class CustomURLSessionDelegate: NSObject, URLSessionDelegate { let originalHost: String init(originalHost: String) { self.originalHost = originalHost } func urlSession( _ session: URLSession, didReceive challenge: URLAuthenticationChallenge, completionHandler: @escaping (URLSession.AuthChallengeDisposition, URLCredential?) -> Void ) { guard challenge.protectionSpace.authenticationMethod == NSURLAuthenticationMethodServerTrust, let serverTrust = challenge.protectionSpace.serverTrust else { completionHandler(.performDefaultHandling, nil) return } let sslPolicy = SecPolicyCreateSSL(true, originalHost as CFString) let basicPolicy = SecPolicyCreateBasicX509() SecTrustSetPolicies(serverTrust, [sslPolicy, basicPolicy] as CFArray) var error: CFError? if SecTrustEvaluateWithError(serverTrust, &error) { completionHandler(.useCredential, URLCredential(trust: serverTrust)) } else { completionHandler(.cancelAuthenticationChallenge, nil) } } } However, TLS validation still fails because the SNI remains the IP address, not the domain. I would appreciate guidance on the supported and App Store–compliant way to handle ISP-specific DNS resolution issues on iOS. If custom DNS or SNI configuration is not supported, what alternative architectural approaches are recommended by Apple?
Replies
1
Boosts
0
Views
330
Activity
Dec ’25
How to set the custom DNS with the Network client
We are facing a DNS resolution issue with a specific ISP, where our domain name does not resolve correctly using the system DNS. However, the same domain works as expected when a custom DNS resolver is used. On Android, this is straightforward to handle by configuring a custom DNS implementation using OkHttp / Retrofit. I am trying to implement a functionally equivalent solution in native iOS (Swift / SwiftUI). Android Reference (Working Behavior) : val dns = DnsOverHttps.Builder() .client(OkHttpClient()) .url("https://cloudflare-dns.com/dns-query".toHttpUrl()) .bootstrapDnsHosts(InetAddress.getByName("1.1.1.1")) .build() OkHttpClient.Builder() .dns(dns) .build() Attempted iOS Approach I attempted the following approach : Resolve the domain to an IP address programmatically (using DNS over HTTPS) Connect directly to the resolved IP address Set the original domain in the Host HTTP header DNS Resolution via DoH : func resolveDomain(domain: String) async throws -> String {     guard let url = URL(         string: "https://cloudflare-dns.com/dns-query?name=\(domain)&type=A"     ) else {         throw URLError(.badURL)     }     var request = URLRequest(url: url)     request.setValue("application/dns-json", forHTTPHeaderField: "accept")     let (data, _) = try await URLSession.shared.data(for: request)     let response = try JSONDecoder().decode(DNSResponse.self, from: data)     guard let ip = response.Answer?.first?.data else {         throw URLError(.cannotFindHost)     }     return ip } API Call Using Resolved IP :  func callAPIUsingCustomDNS() async throws {     let ip = try await resolveDomain(domain: "example.com")     guard let url = URL(string: "https://(ip)") else {         throw URLError(.badURL)     }     let configuration = URLSessionConfiguration.ephemeral     let session = URLSession(         configuration: configuration,         delegate: CustomURLSessionDelegate(originalHost: "example.com"),         delegateQueue: .main     )     var request = URLRequest(url: url)     request.setValue("example.com", forHTTPHeaderField: "Host")     let (_, response) = try await session.data(for: request)     print("Success: (response)") } Problem Encountered When connecting via the IP address, the TLS handshake fails with the following error: Error Domain=NSURLErrorDomain Code=-1200 "A TLS error caused the secure connection to fail." This appears to happen because iOS sends the IP address as the Server Name Indication (SNI) during the TLS handshake, while the server’s certificate is issued for the domain name. Custom URLSessionDelegate Attempt :  class CustomURLSessionDelegate: NSObject, URLSessionDelegate {     let originalHost: String     init(originalHost: String) {         self.originalHost = originalHost     }     func urlSession(         _ session: URLSession,         didReceive challenge: URLAuthenticationChallenge,         completionHandler: @escaping (URLSession.AuthChallengeDisposition, URLCredential?) -> Void     ) {         guard challenge.protectionSpace.authenticationMethod == NSURLAuthenticationMethodServerTrust,               let serverTrust = challenge.protectionSpace.serverTrust else {             completionHandler(.performDefaultHandling, nil)             return         }         let sslPolicy = SecPolicyCreateSSL(true, originalHost as CFString)         let basicPolicy = SecPolicyCreateBasicX509()         SecTrustSetPolicies(serverTrust, [sslPolicy, basicPolicy] as CFArray)         var error: CFError?         if SecTrustEvaluateWithError(serverTrust, &error) {             completionHandler(.useCredential, URLCredential(trust: serverTrust))         } else {             completionHandler(.cancelAuthenticationChallenge, nil)         }     } } However, TLS validation still fails because the SNI remains the IP address, not the domain. I would appreciate guidance on the supported and App Store–compliant way to handle ISP-specific DNS resolution issues on iOS. If custom DNS or SNI configuration is not supported, what alternative architectural approaches are recommended by Apple?
Replies
1
Boosts
0
Views
254
Activity
Dec ’25
iPhone 17 Cellular Network performance is getting worse than the previous device models
Recent our APP performance online has revealed significant degradation in cellular network SRTT (Smoothed Round-Trip Time) on the latest iPhone models (iPhone 18.1, 18.2, and 18.3) relative to previous generation devices. IDC network transmission SRTT P50 increased by 10.64%, P95 increased by 103.41%; CDN network transmission SRTT P50 increased by 12.66%, P95 increased by 81.08%. Detailed Performance Metrics: 1. Network Transmission SRTT Degradation Following optimization of our APP's network library, iOS network transmission SRTT showed improvement from mid-August through mid-September. However, starting September 16, cellular network SRTT metrics began to degrade (SRTT increased). This degradation affects both IDC and CDN routes. WiFi network performance remains unaffected. 2. Excluding iOS 26.x Version Data After data filtering, we discovered that the increase in iOS cellular network transmission SRTT was caused by data samples from iOS 26.x versions. When excluding iOS 26.x version data, network transmission SRTT shows no growth. 3. Comparative Analysis: iOS 26.x vs. iOS < 26.0 network transmission SRTT shows: IDC (Internet Data Center) Links: P50 latency: 10.64% increase / P95 latency: 103.41% increase CDN (Content Delivery Network) Links: P50 latency: 12.66% increase / P95 latency: 81.08% increase 4. Device-Model Analysis: iOS 26.x SRTT Degradation Scope Granular analysis of iOS 26.x samples across different device models reveals that network SRTT degradation is not universal but rather specific to certain iPhone models. These measurements indicate a substantial regression in network performance across both data center and content delivery pathways.
Replies
1
Boosts
0
Views
202
Activity
Dec ’25
iOS doesn’t switch back to home router + socket connect failure in AP mode
In iOS AP-mode onboarding for IOT devices, why does the iPhone sometimes stay stuck on the device Wi-Fi (no internet) and fail to route packets to the device’s local IP, even though SSID is correct? Sub-questions to include: • Is this an iOS Wi-Fi auto-join priority issue? • Can AP networks become “sticky” after multiple joins? • How does iOS choose the active routing interface when Wi-Fi has no gateway? • Why does the packet never reach the device even though NWPath shows WiFi = satisfied?
Replies
1
Boosts
0
Views
162
Activity
Dec ’25
How to detect if Wifi is being used for CarPlay
What is the best way to detect if the Wifi is being used for Wireless Carplay or is just a normal network interface?
Replies
9
Boosts
0
Views
312
Activity
Dec ’25
Multipeer Communication via Bluetooth Only
Hi Team, We have a requirement for device-to-device communication using the Multipeer Connectivity framework without requiring Wi- Fi connectivity. Current Status: Multipeer communication works successfully when Wi-Fi is enabled Connection fails when using Bluetooth-only (Wi-Fi disabled, in Airplane Mode) Concern: We've found forum suggesting that Multipeer Connectivity over Bluetooth-only has been restricted since iOS 11, despite Apple's documentation stating support for both Wi-Fi and Bluetooth transports. Request: Could you please confirm: Whether Bluetooth-only Multipeer Connectivity is officially supported in current iOS versions( iOS 18.0+)? If there are specific configurations or entitlements required for Bluetooth-only operation? Any known limitations or alternative approaches for offline device-to-device communication? This clarification will help us determine the appropriate implementation strategy for our offline communication requirements. Thank you.
Replies
3
Boosts
0
Views
268
Activity
Dec ’25
iPhone 15 Pro Max Fails to Establish Connection with MT7682 IoT Device’s AP Hotspot (Affecting Network Provisioning)
iPhone 15 Pro Max and similar models are unable to connect to the AP configuration hotspot broadcast by an IoT oven equipped with the MediaTek MT7682 chip. The connection interface remains in a spinning/loading state indefinitely, preventing the completion of the device’s network provisioning workflow.
Replies
2
Boosts
0
Views
97
Activity
Dec ’25
Why nslookup dns queries not routed to NETransparentProxyProvider
I’m using an NETransparentProxyProvider where I add UDP-53 rules to intercept DNS queries from a private application. These queries are resolved locally on the endpoint by returning a custom DNS response. Example Rules look like this: NENetworkRule(destinationHost: NWHostEndpoint(hostname: "mypaapp.com", port: 53),protocol:.UDP) This works as expected through browser and ping. handleNewUDPFlow/handleNewFlow with NEAppProxyUDPFlow gets called where custom dns response get written. Using nslookup mypaapp.com doesn't works. Why does this behaves differently for nslookup?
Replies
1
Boosts
0
Views
129
Activity
Dec ’25
How to add more cipher suites
I want to add more cipher suites. I use NWConnection to make a connection. Before I use sec_protocol_options_append_tls_ciphersuite method to add more cipher suites, I found that Apple provided 20 cipher suites shown in the client hello packet. But after I added three more cipher suites, I found that nothing changed, and still original 20 cipher suites shown in the client hello packet when I made a new connection. The following is the code about connection. I want to add three more cipher suites: tls_ciphersuite_t.ECDHE_ECDSA_WITH_AES_128_CBC_SHA256, tls_ciphersuite_t.ECDHE_ECDSA_WITH_AES_256_CBC_SHA384, tls_ciphersuite_t.ECDHE_RSA_WITH_AES_256_CBC_SHA384 Can you give me some advice about how to add more cipher suites? Thanks. By the way, I working on a MacOS app. Xcode version: 16 MacOS version: 15.6
Replies
1
Boosts
0
Views
196
Activity
Dec ’25