Ld /Users/devops.mac1/Library/Developer/Xcode/DerivedData/MyJio-fwrzosmtfndowdejljdqbqhcfkjo/Build/Intermediates.noindex/ArchiveIntermediates/*****Production/IntermediateBuildFilesPath/UninstalledProducts/iphoneos/jsi.framework/jsi normal (in target 'React-jsi' from project 'Pods') Facing this error while trying to archive an iOS project through terminal in Mac Agent. The having react native code too. Unable to resolve.

Hi, After installing Macos 26 Beta on my Mac Mini M1 it doesn't boot. On the front panel there is an orange blinking light. The monitor doesn't recognize it. In DFU mode my other Mac Mini (M4) recognizes it but I can't restore it from Configurator (see print). Thanks for your help.

I am writing to report a significant battery drain issue after updating my Apple Watch SE (2nd generation) to watchOS 26.0 beta. Since the update, my watch’s battery life has drastically decreased: it goes from 100% to 0% in just 6 hours, whereas previously, under my typical usage, a single charge would last about 1.5 days. I have already tried the following troubleshooting steps without success: 1. Performed a fresh reset of the watch. 2. Reset my iPhone. 3. Disabled background app activity. 4. Enabled airplane mode and power saving mode. 5. Disabled Live Activities and Photo Memories Despite these measures, the issue persists. The battery health of my watch is at 90%, so I believe this is likely related to the software update. I am quite concerned about this situation. I have researched and noticed that similar battery drain problems were reported by beta testers of watchOS 11, and unfortunately, there appeared to be no clear resolution at that time. I rely on my Apple Watch daily, and I sincerely hope this can be addressed soon. I would appreciate your assistance in resolving this issue, as it is significantly affecting the usability of my Apple Watch. Thank you for your attention to this matter.

my app was kicked off the App Store because it needed updating. i have now done that and it is ready for TestFlight. before I uploaded it, I had look around the App Store to see if there were any similar apps and I found one which just looks like it’s pinched the ideas about how it works-it’s uniqueness claiming to be the first of its kind and who it is aimed at Its not exactly the sameseems silly similar to mine as I was reading the text seemed similar to mine. it’s not exactly the same but the principle of it the idea of the way it works is definitely the same as mine. I couldn’t look at the code because it didn’t seem to be open source software databases. it is not free to download but I didn’t want to buy it. Is there a way of finding out more about its. Function and ti see / compare the code to see if there is infringement or a violation.

Hello all. I am currently developing a database app of particular products for people who collect this item. Let's say model airplanes. People can look at their list of model airplanes and also see a collection of airplanes by model companies. I want to offer a link from a product in my app to a local retailer's website who sells this product on their website. Not just their base site, but directly to the products page. Meaning each product in my database will have a unique link to an external product page. This could also include links to Ebay or Amazon if local retailer doesn't sell the product. Is this sort of feature allowed inside App Store Apps as technically it's not an in-app purchase? I do see some vague answers around but none that target this specific circumstance. Thankyou in advance.

Over the past few months, I’ve been experiencing persistent, abnormal behavior on my iPhone. Here's a short timeline: March 2025: Most apps log me out every time I close them. April 2025: Stored passwords suddenly begin failing across apps and websites. May–June 2025: Password recovery emails from Gmail accounts no longer arrive — suggesting that Gmail itself may be compromised or blocked/intercepted. Given the escalation, I ran several diagnostics and extracted system-level logs. Below is a structured summary of findings that point toward potential remote access, network traffic rerouting, and possibly hidden use of Bluetooth or debugging interfaces. ##1 Source: remotectl_dumpstate.txt Notable entries: com.apple.mobile.lockdown.remote.trusted and .untrusted com.apple.mobile.file_relay.shim.remote com.apple.webinspector.shim.remote com.apple.pcapd.shim.remote com.apple.bluetooth.BTPacketLogger.shim.remote com.apple.mobile.insecure_notification_proxy.remote This volume of .shim.remote and diagnostic services appears highly irregular for a non-debug, non-jailbroken device. 2. Skywalk Network Flows and Unusual Routing Source: skywalk.txt Dozens of flowswitch entries across interfaces like: ipsec0-7, pdp_ip0-2, en0-2, awdl0 Apps such as Gmail, ChatGPT, Preferences, and com.apple.WebKit are marked as defunct, yet persist in flow tables. Two specific daemons — replicatord and siriactionsd — appear on nearly every interface, in both QUIC and TCP6 traffic. skywalkctl flow-route shows multiple external IP paths, with flows routed through ipsec7, owned by kernel_task.0 — which could indicate system-level tunneling. 3. System Anomalies and Resource Behavior Inaccessible System Network Tools Source: get-network-info.txt All scutil calls fail (/usr/sbin/scutil does not exist). This blocks access to: DNS configuration (scutil --dns) Proxy and VPN status (scutil --proxy, --nc list) Reachability checks (scutil -r www.apple.com) Key Questions for the Developer Community Are >50 remote .shim.remote services typical on iOS 18.5 (release build)? Or does this suggest tampering, an MDM configuration, or debug provisioning? Could a misconfigured VPN or MDM profile enable persistent flow-switching across multiple interfaces (e.g., ipsec, pdp, awdl) and reroute app traffic such as Gmail? Is it possible for a test or developer certificate to silently side-load a background daemon, or trigger services like pcapd or file_relay, without showing in Profiles or Settings? Has anyone else seen the scutil binary missing or inaccessible on a stock iPhone? Could this be a sign of intentional lockdown or system modification? If anyone on iOS 18.5 / iPhone17,1 can share their remotectl_dumpstate output, I'd like to compare the service count and see if this behavior is reproducible. I’d appreciate any insight from those familiar with Apple’s system daemons, skywalk internals, or network service behavior. Happy to share sanitized logs or run additional diagnostics if needed. Thanks in advance. get-network-info.txt remotectl_dumpstate.txt assetsd.diskwrites_resource-2025-06-25-221428.json

Issue with SwiftData: “no such table: ZAPPSETTINGS” and SQLite I/O error on app launch Hello, I’m encountering persistent errors with SwiftData in my SwiftUI app related to Core Data’s underlying SQLite database. Despite defining my models correctly, the app fails to initialize the persistent store, throwing the following error on startup: CoreData error: SQLCore dispatchRequest: no such table: ZAPPSETTINGS. I/O error opening database at /.../default.store. SQLite error code:1, NSSQLiteErrorDomain=1. File “default.store” couldn’t be opened. Context The error only appears concerning my AppSettings model. I have another model, LocationPoint, which appears correctly defined and used. I have tried deleting the app, resetting the device, and cleaning builds but the error persists. The error message suggests the database file is present but the table for ZAPPSETTINGS (the Core Data table for AppSettings) does not exist. Code Samples Main App Entry import SwiftData import SwiftUI @main struct Krow3_0App: App { @State private var userLocationManager = UserLocationManager() @State private var geocodingViewModel = GeocodingViewModel() @State private var locationSearchViewModel = LocationSearchViewModel() @State private var router = Router() var body: some Scene { WindowGroup { LaunchView() .environment(userLocationManager) .environment(geocodingViewModel) .environment(locationSearchViewModel) .environment(router) .modelContainer(for: [LocationPoint.self, AppSettings.self]) } } } AppSettings Model import Foundation import SwiftData @Model class AppSettings { var isMetric: Bool init(isMetric: Bool = false) { self.isMetric = isMetric } } What I’ve Tried Fully uninstalling and reinstalling the app on device and simulator. Resetting the simulator/device. Cleaning the Xcode build folder. Verifying the schema logs which correctly list both LocationPoint and AppSettings. Changing model names to avoid potential conflicts. Adding .modelContainer configuration with autosave enabled. Questions Is there a known bug or limitation with SwiftData concerning certain model setups or naming? Could this be related to how the data container initializes or migrates schemas? Are there recommended debugging or migration steps to resolve “no such table” SQLite errors with SwiftData? How can I safely reset or migrate the persistent store without corrupting the database? Any insights or suggestions would be greatly appreciated! Thank you!

It works if Bluetooth is on for a long time, is there any problem? I'm developing an app using beacon and Bluetooth, and I have to operate the app in the background, and after spending the weekend, I have to detect the beacon and revive the app. I can see that there is an app in the background, but the app is not coming back to life. How can I solve this problem? Or is the OS team working on something to block it? The test model is Iphone16Plus.

i am trying to build some projects please check out my project

When I Installed beta 2 , The multiple columns for widgets disappeared. I want it back ..... Ive tried removing my device in CarPlay under General and adding it again. Didn't work.

I’d like to create a button on my iPhone Home Screen that changes settings if I am using an external lens mounted to my phone. This is what I have along with notes on what I hope to do. But it does not work. I am only able to open either the camera settings or the camera preserve settings but nothing will toggle macro controls. There is an additional step within the camera app as well but it can be skipped for brevity. Name: Telephoto and macro lenses Check if macro settings are already enabled or not. (Settings > Camera > Macro Control toggle) as well as (Settings > Camera > Preserve Settings > Macro Control toggle) Non-working shortcut code: Verification question: "Are you using an external lens?" If yes, Notification: "Turning on Macro Control and preserve settings for macro control." (Run below immediately) prefs:root=CAMERA&path=Turn%20On%20Macro_Control And prefs:root=CAMERA&path=CameraPreserveSettingsSwitch&path=Turn%20On%20Macro_Control If no, Notification: "Turning off Macro Control and Preserve Settings for macro control." (Run below immediately) prefs:root=CAMERA&path=Turn%20Off%20Macro_Control And prefs:root=CAMERA&path=CameraPreserveSettingsSwitch&path=Turn%20Off%20Macro_Control

After the update of the Xcode to latest version, I’m getting “No Such Module Unity Framework” as error. the complete information is below. I had to update the Xcode and the O.S as per the Apple Requirement from my older version of 14.x to latest 16.3. I had no issued running the Unity within my iOS App till the recent update. Previous Setup: Unity was successfully integrated into this iOS app and running fine before the update. As it was working till the Xcode version 14.3, i have not changed any code relevant to Unity. What I’ve Tried: a. Added UnityFramework.framework to “Link Binary with Libraries” and marked it as “Embed & Sign”. b. Verified Framework Search Paths include $(PROJECT_DIR)/UnityProject/build/Debug-iphoneos c. Cleaned build folder, deleted Derived Data d. Checked [CP] Embed Pods Frameworks step in Build Phases Stuck On: Xcode still throws "No such module 'UnityFramework'" — it’s as if the framework isn’t being built or seen from my main project. Request for Help: Has anyone encountered this issue post-Xcode 16.3 update from 14.x. I’d really appreciate any guidance, updated workflows, or even a checklist of steps for properly integrating Unity into an existing iOS app with the new Xcode build system.

Dear Apple Support Team, I am writing to request clarification regarding paid service eligibility for my iPhone 14 Pro outside its original country of purchase. Here are the details of my device: Model: iPhone 14 Pro Serial Number: J346337TKY Purchase Date: December 2022 Current Location: Astana, Kazakhstan Warranty Status: Expired I recently visited an Apple Authorized Service Provider in Kazakhstan, and I was informed that my device could not be accepted for repair due to regional restrictions, even on a paid basis. I would appreciate your assistance in confirming whether my device qualifies for paid repair service in Kazakhstan, or if it is strictly limited to service in its country of origin. If not eligible, could you please advise on the nearest country or region where I can receive authorized service? Looking forward to your guidance on the next steps. Best regards, Ruslan D

I’ve updated to iOS 26 Beta 1, and now I can’t revert to an earlier version because my iPhone automatically created a backup using the iOS 26 version. I’m also unable to check for updates—my device can’t retrieve information from the server, so it’s not detecting that Beta 2 is available. I need help resolving this issue, please.

I have been working on telecommunication testing of ALE Softwar. Since no invite email received, I can’t unable to test in my IPhone. there is no options to add my test app. this that app url https://apps.apple.com/in/app/ale-softphone/id1588713865

After upgrading to iOS system 26, the local name broadcast type is 08, but before upgrading, it is 09 and will be included in the scan resp message; In version 26, the scan resp will also include Manufacturer Specific Data. Before the upgrade, the broadcast message may not necessarily include Manufacturer Specific Data; What I want to ask is, are there any restrictions on Bluetooth broadcasting in version 26? Is it necessary to include Manufacturer Specific Data data? If Manufacturer Specific Data data is included, it may cause fields in the local name broadcast to be truncated and use simple names of type 08

Hello Devs, I wanted to bring this up to display the frustration that I have obtaining the CarPlay entitlements. First and foremost they don't give you a set timeline and there is no contact number to speak to someone about this. When you call developer support they go on and say it is a different department. There is an email but all I have received is an automated response back to me. Has anyone received the navigation entitlements and if so what was the timeline of you receiving it?

I'm trying to make my own MDM server and I'm having trouble allowing nginx to proxy the connection. The web app I'm making can accept http requests so I require nginx. I'm using a certificate from letsencrypt. Every time I try to enroll a phone it instantly rejects at nginx. I have tried multiple cipher options in nginx. I found the following link and my cert supports all except the DHE ones but they say you only need 1. (https://developer.apple.com/forums/thread/128482?answerId=404052022#404052022) What else can I do? 2025/05/21 14:39:44 [info] 105709#105709: *2887 peer closed connection in SSL handshake while SSL handshaking, client: 27.32.155.108, server: 0.0.0.0:9234 2025/05/21 14:41:42 [info] 106014#106014: *2891 peer closed connection in SSL handshake while SSL handshaking, client: 27.32.155.108, server: 0.0.0.0:9234 2025/05/21 14:42:32 [info] 106134#106134: *89 peer closed connection in SSL handshake while SSL handshaking, client: 27.32.155.108, server: 0.0.0.0:9234 2025/05/21 15:09:13 [info] 106132#106132: *124 client timed out (110: Connection timed out) while waiting for request, client: 172.40.1.61, server: 0.0.0.0:9234 below from ssllabs.com upstream backendmdmios { server 172.40.1.61:6744; } server { listen 9234 ssl; http2 on; server_name mdm.domainplaceholder.com; error_log /etc/nginx/logs/ios.com.error.log debug; # error; ssl_certificate /etc/letsencrypt/live/mdm.domainplaceholder.com/fullchain.pem; ssl_certificate_key /etc/letsencrypt/live/mdm.domainplaceholder.com/privkey.pem; ssl_protocols TLSv1.2 TLSv1.3; #ssl_ciphers ECDHE-RSA-AES128-GCM-SHA256:ECDHE-RSA-AES256-GCM-SHA384; ssl_ciphers ECDHE-RSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-CBC-SHA256:ECDHE-RSA-AES128-CBC-SHA:ECDHE-RSA-AES256-GCM-SHA384; #ssl_ciphers TLS_AES_128_GCM_SHA256:TLS_AES_256_GCM_SHA384:TLS_CHACHA20_POLY1305_SHA256:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-ECDSA-CHACHA20-POLY1305; #ssl_protocols TLSv1 TLSv1.1 TLSv1.2; #ssl_ciphers EECDH+AESGCM:EDH+AESGCM:AES256+EECDH:AES256+EDH:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES128-GCM-SHA256:ECDHE-RSA-AES256-SHA384:ECDHE-RSA-AES128-SHA256:ECDHE-RSA-AES256-SHA:ECDHE-RSA-AES128-SHA:DHE-RSA-AES256-SHA256:DHE-RSA-AES128-SHA256:DHE-RSA-AES256-SHA:DHE-RSA-AES128-SHA:AES256-GCM-SHA384:AES128-GCM-SHA256:AES256-SHA256:AES128-SHA256:AES256-SHA:AES128-SHA:HIGH:!aNULL:!eNULL:!EXPORT:!DES:!MD5:!PSK:!RC4:!3DES:!CAMELLIA; ssl_prefer_server_ciphers on; ssl_dhparam /etc/nginx/dhparams.pem; location / { proxy_set_header Host $host; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_pass http://backendmdmios$request_uri; } }

Hi, EtreCheck I could really use some help with this, as I haven’t been able to find much concrete info. I mistakenly updated my MacBook to the 15.5 beta, and while I can’t say with 100% certainty that the issues started immediately after, I’ve been experiencing consistent kernel panics every time the machine wakes from sleep — it restarts completely and throws an error. I’m really hoping this isn’t a hardware issue. The MacBook is just over two years old, and I rely on it daily for work — replacing it right now isn’t an option. Unfortunately, I don’t have a Time Machine backup to roll back to. I’ve already wiped the machine and reinstalled macOS via recovery mode, and Apple Diagnostics isn’t showing any hardware problems. Just to rule it out: I’m not using any external devices — no docks, Thunderbolt accessories, or anything else plugged in. I came across EtreCheck as a recommended tool, and I’ve included the results below. If anyone is able to help interpret them or point me in the right direction, I’d really appreciate it. I’ve since unenrolled from the beta and turned off automatic updates — I’m just hoping this is a beta-related bug that resolves with the next stable release. Thanks in advance for any guidance.

Based a quick research, comfort and fit, noise cancellation issues and durability seems to be the most consistent issues with pilot headsets. I wouldn’t say there is a problem here, because you can easily throw out the faulty headset and spend another $1000 on a new one. However, what if apple can profit by introducing their version of pilot headsets? Besides, most airlines use Apple iPads for Navigation, crew scheduling etc. Make it a one stop shop. Apple already has the framework for music headsets, why not use it as a base for pilot headsets? Disrupt an already stagnant market and give pilots a great alternative. Tap into the interests of a new generation of pilots again most which already uses Apple products. Come up with a new fresh look of ‘pilot comms.’ A good idea is to pitch to the GA (general aviation) industry maybe include Apple headsets with the purchase of a new aircraft.