hi, i have an objc ipad application that use xib with zooming for adapt to the screen (until ios18) but with ipad os 26 will be displayed wrong

i accidentally updated my iphone with the ios 18 and i dislike it. the emoji display were too huge and the picture gallery was kinda messy. i hope apple could fix this by bringing back the old emoji display and the gallery settings.

Below is the sample css code where I render a web page in my webview screens fonts became too small after 18.4 and its so hard to read when I launch my app . Any workarounds to address this issue .sg-labels-canvas { font-size: 15px; display: flex; flex-direction: column; font-family: -apple-system, BlinkMacSystemFont, 'Helvetica Neue', Roboto, sans-serif; font-style: normal; }

I'm trying to display CPButtons (CPContactCallButton, CPContactMessageButton) in CPContactTemplate. They are displayed using device with iOS16, but with iOS26 device CPContactTemplate only displays contact image and contact name. No buttons. Is it a bug? I don't have iOS17/18 devices to try.

Hi there I have developed an offline algorithm for calculating tides, which works based on the built-in database of tidal stations in some regions. The algorithm works correctly and the results match the real data. I would like to receive and add moon data from Weather Kit to the algorithm for performance improvement experiments. What requirements do I need to apply to the application so that I can use data from Weather Kit in my algorithm ?

I created a data structure based on a dictionary of words. The purpose is to link each word to all other words made up of the same letters plus one. Example: table -> ablate, cablet, tabled, gablet, albeit, albite, etc. For this I built a data model made of three entities: Word, Draw, Link. A Draw is a set of letters corresponding to a Word and sorted in alphabetic order, like : HOUSE -> EHOSU. A Link is a letter that you add to a Draw to get another Draw. So my data model looks like this: And here is how I implemented it in Xcode: Entity Word (let's forget the attribute optComp that plays no role here) Entity Draw Entity Link I am populating the data in two steps: first I read a list of words from a .txt source and I populate the Word entity and at the same time the Draw entity with the corresponding relationship (function loadDic()) This first step apparently works fine. I can easily find all anagrams of any word with something like word.sort.word.spelling I read through the Draw entity. For each draw I seek all existing +1 draws considering each letter of the alphabet. If there are, I create a Link and add the relationships (function createLinks()) Here is where something goes wrong. If the Link's and the relationship Draw.plus seem to be correctly created, the other relationship Link.gives is only partially populated, say 50%. Moreover, I tried to apply an additional routine (updateLinks()) , focusing only on Link's with an empty Link.gives relationship and updating them. But again, only 50% of the nil relationships appear to be populated. I could not find out why those relationships are not properly populated. If someone can help me out I would be grateful. Here is the code: LoadDic() function (OK) : func loadDic() { print("Loading dictionary...") dataAlreadyLoaded.toggle() guard let url = Bundle.main.url(forResource: INPUT_FILE, withExtension: "txt") else { fatalError("\(INPUT_FILE).txt not found") } if let dico = try? String(contentsOf: url, encoding: String.Encoding.utf8 ) { let lines = dico.split(separator: "\r\n") for line in lines { let lineArray = line.split(separator: " ") print("\(lineArray[0])") // word let wordSorted = String(lineArray[0].sorted()) let draw = getDraw(drawLetters: wordSorted) ?? addDraw(drawLetters: wordSorted) // look if draw already exists, otherwise create new one. let wordItem = Word(context: viewContext) // create word entry with to-one-relationship to draw wordItem.spelling = String(lineArray[0]) wordItem.optComp = (Int(String(lineArray[1])) == 1) wordItem.sort = draw do { try viewContext.save() } catch { print("Errort saving ods9: \(error)") } } } print("Ods Chargé") } func addDraw(drawLetters: String) -> Draw { let newDraw = Draw(context: viewContext) newDraw.draw = drawLetters return(newDraw) } func getDraw(drawLetters: String) -> Draw? { let request: NSFetchRequest<Draw> = Draw.fetchRequest() request.entity = Draw.entity() request.predicate = NSPredicate(format: "draw == %@", drawLetters) do { let drw = try viewContext.fetch(request) return drw.isEmpty ? nil : drw[0] } catch { print("Erreur recherche Tirage") return nil } } createLinks() function (NOK): func createLinks() { var erreur = " fetch request <Draw>" let request: NSFetchRequest<Draw> = Draw.fetchRequest() request.entity = Draw.entity() request.predicate = NSPredicate(value: true) print("Building relationships...") do { let draws = try viewContext.fetch(request) count = draws.count for draw in draws { print("\(count) - \(draw.draw!)") linkTable.removeAll() for letter in ALPHABET { print(letter) let drawLettersPlus = String((draw.draw! + String(letter)).sorted()) // draw with one more letter if let drawPlus = draws.first(where: { $0.draw == drawLettersPlus }) { // look for Draw entity that matches augmented draw let linkItem = Link(context: viewContext) // if found, create new link based on letter with relationship to augmented draw linkItem.letter = String(letter) linkItem.gives = drawPlus erreur = " saving \(draw.draw!) + \(letter)" try viewContext.save() linkTable.append(linkItem) // saves link to populate the one-to-many relationship of the initial draw, once the alphabet is through } } let drawUpdate = draw as NSManagedObject // populate the one-to-many relationship of the initial draw let linkSet = Set(linkTable) as NSSet drawUpdate.setValue(linkSet, forKey: "plus") erreur = " saving \(draw.draw!) links plus" try viewContext.save() count -= 1 // next draw } } catch { print("Error " + erreur) } print("Graph completed") } updateLinks function (NOK): func updateLinks() { var erreur = "fetch request <Link>" let request: NSFetchRequest<Link> = Link.fetchRequest() request.entity = Link.entity() print("Running patch...") do { request.predicate = NSPredicate(format: "gives == nil") let links = try viewContext.fetch(request) for link in links { let baseDraw = link.back!.draw! print("\(baseDraw) \(link.letter!)") let augmDrawLetters = String((baseDraw + link.letter!).sorted()) if let augmDraw = getDraw(drawLetters: augmDrawLetters) { viewContext.perform { let updateLink = link as NSManagedObject updateLink.setValue(augmDraw, forKey: "gives") erreur = " saving \(augmDraw.draw!) \(link.letter!)" do { try viewContext.save() } catch { print("Erreur mise à jour lien") } } } } } catch { print("Error " + erreur) } } RESULT And this is the output showing the content of the Draw entity with relationships after createLinks() is applied: And here after updateLinks() is applied :

Hello everyone, I’ve reached out to Apple’s review team multiple times, but unfortunately, I haven’t received any clear or specific guidance on why my app was rejected. My app has been rejected several times with the reason “Spam” under guideline 4.3, and I still don't understand exactly which part of the app is problematic. Even after providing the necessary information about the data, I resubmitted the app, and after a few days, it quickly moved into "In Review" status, but then was rejected within seconds with the same “Spam” message. I have sent over 13 messages asking for specific feedback, and all I get are vague responses saying “It’s spam, refer to 4.3, fix your app, and resubmit.” However, when I review the guidelines, I don’t see any specific reasons for rejection that apply to my app. I’m particularly confused because my app is a VPN, and when I check the guidelines, I see that apps in categories like dating and others are saturated, but VPN apps are not. My app uses completely dedicated servers, and the IP addresses are not found in any other apps. Still, my app keeps getting rejected. If anyone has encountered a similar issue or has any insight into what might be causing this, I would greatly appreciate it if you could provide detailed guidance on what specifically needs to be changed to get the app approved. Thank you!

Hi community my name is Adam Robles. I have a question. I recently downloaded the beta on my iPad Pro 13 inch and I noticed where are the iPad wallpapers I only get one wallpaper, but where what happened to the wallpaper that was released with iPad last year

As of right now Icon Composer does not support creating app icons for visionOS and tvOS. It appears that only system apps can provide glass icons for those platforms. How should developers handle this? In extreme cases, the flat icon on those platforms will look wildly different from their glass counterparts. From what I have seen visionOS and tvOS also do not apply any automatic treatment like on iOS where legacy icons get a glass effect. So, third party app icons are just going to look out of place for (hopefully just) a year on those platforms? What is the recommended approach here? You could obviously fake the effect, but I feel like that would be worse.

This has been an issue since installing the first beta and I haven't seen anyone else say anything about it so I feel like I'm going kind of bonkers. While using Dark Mode, double-tapping to select a word while using the Liquid Glass keyboard, like in Messages or Safari, produces a flashlight-like effect over the text with each tap. While this is a fine animation and pretty helpful when moving the cursor, the brightness of the flashlight effect on white text in Dark Mode makes it impossible to see what you're actually tapping to select. The brightness seems to intensify 100x when rapidly tapping. This is not an issue in Light Mode when the text itself is black. To recreate this, just turn your phone to Dark Mode, go into Messages and type a few words into a thread. Try to double-tap to select a word in the text box. The brightness of the selected word should intensify to the point of being unable to see the word itself. Has anyone been bothered by this? Is there a way to fix or adjust it? I've tried reducing transparency and a bunch of other settings but nothing has worked.

Feedback id: FB16140301 Below are the steps to reproduce the bug in Contacts app. Open Contacts app. Now search for a contact and didSelect that contact. Now slightly hold swipe right(from view's center leading position) as to pop the view but not fully swipe, now release the finger and you can see the back nav bar button missing and tapping the back button position also doesn't perform dismiss action. Now do fully swipe from left to right to dismiss(pop) current view. Here you can see the search bar missing.-> That's the bug.

I’m delighted with the introduction of new color folders. Although, I can’t help but wonder why we still need both color folders and tags. Aren’t the color folders sufficient for our needs?

Hi Guys, I noticed that with Icon Composer when you export the icon it does not export a square image, is there any way of doing it or that's how it is now? Checking the icon on the iPhone something doesn't seem right...

I'm trying out Icon Composer Version 1.0 (27.4). I imported a simple logo and sized it in the outer circle. The icon appears good in the Icon Composer. But when I export the file and use it for my app icon it seems to be missing a margin or padding that other native application icons have. Am i supposed to be adding my own padding to these resulting icons or am I building them incorrectly? Any guidance would be appreciated. Thanks!

On earlier iOS versions Live Activity displays correctly according to mode set.  Can't find an opened issue for that version: iOS 26 device: iPhone 16

I'm using the new badge feature for UIBarButtonItem, but it's not working properly for me when transitioning between view controllers. I have two view controller with various right bar button items. In the first view controller the first button (the one with the bell) has a badge with a numeric count. The second view controller has the same button but in the third position. When I push the second view controller, it seems that the badge maintains also the old position, so I see two buttons with badges instead of one. What can I do to fix this?

I have two views I've applied Liquid Glass to in Swift UI. I've noticed that depending on the height of the view the material changes and I'm not sure why. See the attached screenshot. Both views add the liquidGlass style in the same way but behave very differently on the same background. Ideally I'd like them to look the same as the bottom one. Is that the same as the clear style?

Hello Apple Team, I’d like to request a feature that allows users to close all background apps at once on iPhones. Currently, closing each app individually can be time-consuming, especially when many are running. A “Close All” button would greatly improve user experience and efficiency. Thank you for considering this suggestion!

Hi, Does the iPad Playgrounds app act completely the same way as a MacBook Playground? I am developing my app on a 2020 MacBook Air M1 using Swift Playgrounds. However, since the testing is going to be done on an iPad Swift Playgrounds, I was worried if my playground would work, since it relies heavily on the screen size etc. My app runs completely perfect on MacBook Playrgounds, but doesn't work on the iPad simulator on Xcode.

In my application, I am creating a simple NSMenu with NSMenuItems. The title of the NSMenuItems are adapted to the system language. So, when the system language is an RTL language (right to left), I want my NSMenuItem to be aligned at the right. I can't see anyone talking about this, or any option that could make me achieve that easily. NSMenuItem* item1; NSMenuItem* item2; item1 = [[NSMenuItem alloc] init]; item2 = [[NSMenuItem alloc] init]; item1.title = "foo"; item2.title = "bar"; item1.action = @selector(fooAction); item2.action = @selector(barAction); NSMenu *menu = [[NSMenu alloc] init]; [menu addItem:item1]; [menu addItem:item2];