I'm updating our app to support metal 4, but the metal 4 types don't seem to get recognized when targeting simulator. Is it known if metal 4 will be supported in the near future, or am I setting up the app wrong?

I have a Core Image filter in my app that uses Metal. I cannot compile it because it complains that the executable tool metal is not available, but I have installed it in Xcode. If I go to the "Components" section of Xcode Settings, it shows it as downloaded. And if I run the suggested command, it also shows it as installed. Any advice? Xcode Version Version 26.0 beta (17A5241e) Build Output Showing All Errors Only Build target Lessons of project StudyJapanese with configuration Light RuleScriptExecution /Users/chris/Library/Developer/Xcode/DerivedData/StudyJapanese-glbneyedpsgxhscqueifpekwaofk/Build/Intermediates.noindex/StudyJapanese.build/Light-iphonesimulator/Lessons.build/DerivedSources/OtsuThresholdKernel.ci.air /Users/chris/Code/SerpentiSei/Shared/iOS/CoreImage/OtsuThresholdKernel.ci.metal normal undefined_arch (in target 'Lessons' from project 'StudyJapanese') cd /Users/chris/Code/SerpentiSei/StudyJapanese /bin/sh -c xcrun\ metal\ -w\ -c\ -fcikernel\ \"\$\{INPUT_FILE_PATH\}\"\ -o\ \"\$\{SCRIPT_OUTPUT_FILE_0\}\"' ' error: error: cannot execute tool 'metal' due to missing Metal Toolchain; use: xcodebuild -downloadComponent MetalToolchain /Users/chris/Code/SerpentiSei/StudyJapanese/error:1:1: cannot execute tool 'metal' due to missing Metal Toolchain; use: xcodebuild -downloadComponent MetalToolchain Build failed 6/9/25, 8:31 PM 27.1 seconds Result of xcodebuild -downloadComponent MetalToolchain (after switching Xcode-beta.app with xcode-select) xcodebuild -downloadComponent MetalToolchain Beginning asset download... Downloaded asset to: /System/Library/AssetsV2/com_apple_MobileAsset_MetalToolchain/4d77809b60771042e514cfcf39662c6d1c195f7d.asset/AssetData/Restore/022-19457-035.dmg Done downloading: Metal Toolchain (17A5241c). Screenshots from Xcode Result of "Copy Information" Metal Toolchain 26.0 [com.apple.MobileAsset.MetalToolchain: 17.0 (17A5241c)] (Installed)

I'm experiencing a specific issue where when using any of the MacOS 26 Tahoe betas with Low Power Mode enabled and using Vsync in fullscreen, my application framerate gets limited to a hard 30 fps. I have not experienced this on any older OS. For example Low Power Mode on 13.6 Ventura with Vsync fullscreen lets my application run at full 60 fps without issues. Is this a bug or a change in behavior of Low Power Mode on Tahoe? My application is 3D, runs at 60 fps and is sensitive to tearing, so I need Vsync and it is mostly utilized in fullscreen. And Low Power Mode is a default for many Macs, so default experience on Tahoe currently is a halved 30 fps. However there also seems to be inconsistencies of on which machines this happens, but older OSes are always fine.

I implemented an EntityAction to change the baseColor tint - and had it working on VisionOS 2.x. import RealityKit import UIKit typealias Float4 = SIMD4<Float> extension UIColor { var float4: Float4 { if cgColor.numberOfComponents == 4, let c = cgColor.components { Float4(Float(c[0]), Float(c[1]), Float(c[2]), Float(c[3])) } else { Float4() } } } struct ColourAction: EntityAction { // MARK: - PUBLIC PROPERTIES let startColour: Float4 let targetColour: Float4 // MARK: - PUBLIC COMPUTED PROPERTIES var animatedValueType: (any AnimatableData.Type)? { Float4.self } // MARK: - INITIATION init(startColour: UIColor, targetColour: UIColor) { self.startColour = startColour.float4 self.targetColour = targetColour.float4 } // MARK: - PUBLIC STATIC FUNCTIONS @MainActor static func registerEntityAction() { ColourAction.subscribe(to: .updated) { event in guard let animationState = event.animationState else { return } let interpolatedColour = event.action.startColour.mixedWith(event.action.targetColour, by: Float(animationState.normalizedTime)) animationState.storeAnimatedValue(interpolatedColour) } } } extension Entity { // MARK: - PUBLIC FUNCTIONS func changeColourTo(_ targetColour: UIColor, duration: Double) { guard let modelComponent = components[ModelComponent.self], let material = modelComponent.materials.first as? PhysicallyBasedMaterial else { return } let colourAction = ColourAction(startColour: material.baseColor.tint, targetColour: targetColour) if let colourAnimation = try? AnimationResource.makeActionAnimation(for: colourAction, duration: duration, bindTarget: .material(0).baseColorTint) { playAnimation(colourAnimation) } } } This doesn't work in VisionOS 26. My current fix is to directly set the material base colour - but this feels like the wrong approach: @MainActor static func registerEntityAction() { ColourAction.subscribe(to: .updated) { event in guard let animationState = event.animationState, let entity = event.targetEntity, let modelComponent = entity.components[ModelComponent.self], var material = modelComponent.materials.first as? PhysicallyBasedMaterial else { return } let interpolatedColour = event.action.startColour.mixedWith(event.action.targetColour, by: Float(animationState.normalizedTime)) material.baseColor.tint = UIColor(interpolatedColour) entity.components[ModelComponent.self]?.materials[0] = material animationState.storeAnimatedValue(interpolatedColour) } } So before I raise this as a bug, was I doing anything wrong in the former version and got lucky? Is there a better approach?

Hello, when I'm looking to customize the icons of my phone, the applications that are in the grouping genres without replacing with all-black images, I don't know what happens by changing the color of the applications in group of change no color throws just listen not the black stuff

Hi everyone, I'm building a native iOS app using Unreal Engine 5.6 with Firebase for authentication and Firestore. The app uses a MetaHuman avatar and is meant to run as a standalone UE app on iPhone. I'm using this Firebase wrapper: 👉 https://pandoa.github.io/FirebaseFeatures/ I've followed all the steps, including: Adding GoogleService-Info.plist to the Xcode project and ensuring it’s in the correct target Calling FIRApp.configure() in AppDelegate Verifying the plist is bundled correctly However, the app crashes on launch, and Firebase does not initialize properly. Crash log shows: [FirebaseCore][I-COR000005] No app has been configured yet. Setup details: Unreal Engine: 5.6 (source build, macOS) iOS Deployment: 17.5 MetaHuman character packaged correctly and app launches fine without Firebase Has anyone here managed to get Firebase working inside a native Unreal Engine iOS app with this setup? I'd love to hear if there’s something I’m missing — maybe something with initialization timing or module loading? Thanks so much in advance 🙏

Hello! Bare with me here, as there is a lot to explain! I am working on implementing a Game Center high score leaderboard into my game. I have looked around for examples of how to properly implement this code, but have come up short on finding much material. Therefore, I have tried implementing it myself based off information I found on apples documentation. Long story short, I am getting success printed when I update my score, but no scores are actually being posted (or at-least no scores are showing up on the Game Center leaderboard when opened). Before I show the code, one thing I have questioned is the fact that this game is still in development. In AppStoreConnect, the status of the leaderboard is "Not Live". Does this affect scores being posted? Onto the code. I have created a GameCenter class which handles getting the leaderboards and posting scores to a specific leaderboard. I will post the code in whole, and will discuss below what is happening. PLEASE VIEW ATTACHED TEXT TO SEE THE GAMECENTER CLASS! GameCenter class - https://developer.apple.com/forums/content/attachment/0dd6dca8-8131-44c8-b928-77b3578bd970 In a different GameScene, once the game is over, I request to post a new high score to Game Center with this line of code: GameCenter.shared.submitScore(id: GameCenterLeaderboards.HighScore.rawValue) Now onto the logic of my code. For the longest time I struggled to figure out how to submit a score. I figured out that in Xcode 12, they deprecated a lot of functions that previously worked for me. Not is seems that we have to load all leaderboards (or the ones we want). That is the purpose behind the leaderboards private variable in the Game Center class. On the start up of the app, I call authenticate player. Once this callback is reached, I call loadLeaderboards which will load the leaderboards for each string id in an enum that I have elsewhere. Each of these leaderboards will be created as a Leaderboard object, and saved in the private leaderboard array. This is so I have access to these leaderboards later when I want to submit a score. Once the game is over, I am calling submitScore with the leaderboard id I want to post to. Right now, I only have a high score, but in the future I may add a parameter to this with the value so it works for other leaderboards as well. Therefore, no value is passed in since I am pulling from local storage which holds the high score. submitScore will get the leaderboard from the private leaderboard array that has the same id as the one passed in. Once I get the correct leaderboard, I submit a score to that leaderboard. Once the callback is hit, I receive the output "Successfully submitted score to leaderboard". This looks promising, except for the fact that no score is actually posted. At startup, I am calling updatePlayerHighScore, which is not complete - but for the purpose of my point, retrieves the high score of the player from the leaderboard and is printing it out to the console. It is printing out (0), meaning that no score was posted. The last thing I have questions about is the context when submitting a score. According to the documentation, this seems to just be metadata that GameCenter does not care about, but rather something the developer can use. Therefore, I think I can cross this off as causing the problem. I believe I implemented this correctly, but for some reason, nothing is posting to the leaderboard. This was ALOT, but I wanted to make sure I got all my thoughts down. Any help on why this is NOT posting would be awesome! Thanks so much! Mark

I need a MeshResource from ModelEntity to generate a box collider, but ModelEntity fails to load USDZ files from the Reality Composer Pro (RCP) bundle. This code works for loading an Entity: // Successfully loads as generic Entity previewEntity = try await Entity(named: fileName, in: realityKitContentBundle) But this fails when trying to load as ModelEntity: // Fails to load as ModelEntity modelEntity = try await ModelEntity(named: fileName, in: realityKitContentBundle) I found this thread mentioning: "You'll likely go from USDZ to Entity which contains a MeshResource when you load/init the USDZ file." But it doesn't explain ​how to actually extract the MeshResource. Could anyone advise: How to properly load USDZ files as ModelEntity from RCP bundles? How to extract MeshResource from a successfully loaded Entity? Alternative approaches to generate box colliders if direct extraction isn't possible? Sample code for extraction or workarounds would be greatly appreciated!

Hi, I'm rewriting my game from SceneKit to RealityKit, and I'm having trouble implementing the following scenario: I tap on the iPhone screen to select an Entity that I want to drag. If an Entity was tapped, it should then be possible to drag it left, right, etc. SceneKit solution: func CGPointToSCNVector3(_ view: SCNView, depth: Float, point: CGPoint) -> SCNVector3 { let projectedOrigin = view.projectPoint(SCNVector3Make(0, 0, Float(depth))) let locationWithz = SCNVector3Make(Float(point.x), Float(point.y), Float(projectedOrigin.z)) return view.unprojectPoint(locationWithz) } and then I was calling: SCNView().hitTest(location, options: [SCNHitTestOption.firstFoundOnly:true]) the code was called inside of the UIPanGestureRecognizer in my UIViewController. Could I reuse that code or should I go with the SwiftUI approach - something like that: var body: some View { RealityView { .... } .gesture(TapGesture().onEnded { }) ? I already have this code: @State private var location: CGPoint? .onTapGesture { location in self.location = location } I'm trying to identify the entity that was tapped within the RealityView like that: RealityView { content in let box: ModelEntity = createBox() // for now there is only one box, however there will be many boxes content.add(box) let anchor = AnchorEntity(world: [0, 0, 0]) content.add(anchor) _ = content.subscribe(to: SceneEvents.Update.self) { event in //TODO: find tapped entity, so that it could be dragged inside of the DragGesture() } Any help would be appreciated. I also noticed that if I create a TapGesture like that: TapGesture(count: 1) .targetedToAnyEntity() and add it to my view using .gesture() then it is not triggered.

This week, I developed a small multiplatform RealityKit project. I also created a demo scene in Reality Composer Pro. Afterward, I imported the local package into the project. Running the project on macOS works perfectly. However, when I tried to run it on my iPhone, I encountered a permission error indicating that it couldn’t read the package. This seems unusual to me because I assumed that the dependency is bundled into the binary file. In an attempt to resolve the issue, I pushed the RCP package to GitHub, hoping it would work. Fortunately, everything compiles successfully now, but the loading time is significantly long, and the animations don’t play on tap gestures. Could someone please help me identify the root cause of this problem?

Looks like is something to do with the code and that is why my images are distorted. please help me get to the right person to help me get this issue resolved

Our APP has integrated 3D function, in order to reduce the memory occupation of the APP in the background, we will uninstall the 3D after the APP enters the background. However, the uninstall also causes problems. When the uninstall process is executed in the background, the app will briefly trigger the background GPU rendering error warning with the error warning code: OGPUMetalError: Insufficient Permission (to submit GPU work from background) (00000006:kIOGPUCommandBufferCallbackErrorBackgroundExecutionNotPermitted) Execution of the command buffer was aborted due to an error during execution. Insufficient Permission (to submit GPU Work from background) (00000006: kIOGPUCommandBufferCallbackErrorBackgroundExecutionNotPermitted) excuse me this warning system will tighten APP permissions background?​ For example, limit or shorten the background survival time of the APP. In addition, will the background refresh function fail, resulting in the failure of Bluetooth Ibeacon activation?

What is Game Mode? Game Mode optimizes your gaming experience by giving your game the highest priority access to your CPU and GPU, lowering usage for background tasks. And it doubles the Bluetooth sampling rate, which reduces input latency and audio latency for wireless accessories like game controllers and AirPods. See Use Game Mode on Mac See Port advanced games to Apple platforms How can I enable Game Mode in my game? Add the Supports Game Mode property (GCSupportsGameMode) to your game’s Info.plist and set to true Correctly identify your game’s Application Category with LSApplicationCategoryType (also Info.plist) Note: Enabling Game Mode makes your game eligible but is not a guarantee; the OS decides if it is ok to enable Game Mode at runtime An app that enables Game Mode but isn’t a game will be rejected by App Review. How can I disable Game Mode? Set GCSupportsGameMode to false. Note: On Mac Game Mode is automatically disabled if the game isn’t running full screen.

Developing a prototype Vision Pro app and would like to render a 3D scene made from Reality Composer Pro on an image anchor in a RealityView. But I have no luck so far to make it work and need some guidance to move on. I got the image file stored in the assets like below: And from below is the source codes: import SwiftUI import RealityKit import RealityKitContent struct AnchorView: View { @State var imageEntity: Entity = { let anchorEntity = AnchorEntity(.image(group: "AR Resources", name: "reanchor")) return anchorEntity }() var body: some View { RealityView { content in do { // Add the initial RealityKit content if let scene = try? await Entity(named: "Scene", in: realityKitContentBundle) { imageEntity.addChild(scene) content.add(imageEntity) } } catch { print("Error occurs when adding reality view content: \(error)") } } } }

Had anyone experienced convexCast causing a crash and what might be behind it? Here's the call stack:

Hi all, I've developed some code that enables an arcball camera interaction with my scene. I've done this using components and systems. The implementation feels a bit messy as I've got gesture code on my realityView, and then a bunch of other code that uses those gesture inputs in my component and system. Is there a demo app, or some example code that shows a nice way to encapsulate these things in to one item for custom cameras, something like Apple's .realityViewCameraControls(.orbit) If not can anyone recommend an approach to take?

Hi, What's the best way to handle drastic changes in scene charateristics with the new MTLFXTemporalDenoisedScaler? Let's say a visible object of the scene radically changes its material properties. I can modify the albedo and roughness textures consequently. But I suspect the history will be corrupted. Blending visual information between the new frame and the previous ones might be a nonsense. I guess the problem should be the same when objects appear or disappear instantly. Is the upsacler manage these events for us (by lowering blending), or should we use the reactive or the denoise strength mask or something like that to handle them?

Reproduce Same SIM card with 4G, same testing location, connected to the same server, xcode debugging game applications, network/profile retrotransmitted, Avg round trip to view data iPhone17， Turn off 4G and turn on WiFi. All the above indicators are acceptable iPhone17， Turn on 4G, turn off WiFi, retry with retransmission and very high Avg round trip iPhone14-16， Turn on 4G and turn off WiFi. All the above indicators are acceptable App Unity3d project .netframe4.0 C# Socket Other Many developers in Chinese forums have provided feedback on this issue

I am trying to implement a ChacterControllerComponent using the following URL. https://developer.apple.com/documentation/realitykit/charactercontrollercomponent I have written sample code, but PhysicsSimulationEvents.WillSimulate is not executed and nothing happens. import SwiftUI import RealityKit import RealityKitContent struct ImmersiveView: View { let gravity: SIMD3<Float> = [0, -50, 0] let jumpSpeed: Float = 10 enum PlayerInput { case none, jump } @State private var testCharacter: Entity = Entity() @State private var myPlayerInput = PlayerInput.none var body: some View { RealityView { content in // Add the initial RealityKit content if let immersiveContentEntity = try? await Entity(named: "Immersive", in: realityKitContentBundle) { content.add(immersiveContentEntity) testCharacter = immersiveContentEntity.findEntity(named: "Capsule")! testCharacter.components.set(CharacterControllerComponent()) let _ = content.subscribe(to: PhysicsSimulationEvents.WillSimulate.self, on: testCharacter) { event in print("subscribe run") let deltaTime: Float = Float(event.deltaTime) var velocity: SIMD3<Float> = .zero var isOnGround: Bool = false // RealityKit automatically adds `CharacterControllerStateComponent` after moving the character for the first time. if let ccState = testCharacter.components[CharacterControllerStateComponent.self] { velocity = ccState.velocity isOnGround = ccState.isOnGround } if !isOnGround { // Gravity is a force, so you need to accumulate it for each frame. velocity += gravity * deltaTime } else if myPlayerInput == .jump { // Set the character's velocity directly to launch it in the air when the player jumps. velocity.y = jumpSpeed } testCharacter.moveCharacter(by: velocity * deltaTime, deltaTime: deltaTime, relativeTo: nil) { event in print("playerEntity collided with \(event.hitEntity.name)") } } } } } } The scene is loaded from RCP. It is simple, just a capsule on a pedestal. Do I need a separate code to run testCharacter from this state?

Hello, Question re: iOS RealityView postProcess. I've got a working postProcess kernel and I'd like to add some depth-based effects to it. Theoretically I should be able to just do: encoder.setTexture(context.sourceDepthTexture, index: 1) and then in the kernel: texture2d<float, access::read> depthIn [[texture(1)]] ... outTexture.write(depthIn.read(gid), gid); And I consistently see all black rendered to the view. The postProcess shader works, so that's not the issue. It just seems to not be receiving actual depth information. (If I set a breakpoint at the encoder setTexture step, I can see preview the color texture of the scene, but the context's depthTexture looks like all NaN / blank.) I've looked at all the WWDC samples, but they include ARView for all the depth sample code, which has a different set of configuration options than RealityView. So far I haven't seen anywhere to explicitly tell RealityView "include the depth information". So I'm not sure if I'm missing something there. It appears that there is indeed a depth texture being passed, but it looks blank. Is there a working example somewhere that we can reference?