Hello, I'm currently working on my first SceneKit game and have encountered an issue related to moving an SCNNode using a UIPanGestureRecognizer. When I deploy the game to my iPhone via Xcode in debug mode, all interactions are smooth. However, when I stop the debugging session and run the game directly from the device (outside of Xcode), the SCNNode movement behaves inconsistently — it works sometimes smoothly and sometimes not and the interaction becomes choppy. The SCNNode movement is controlled using a UIPanGestureRecognizer. Do you have any ideas what might be causing the issue?

Hi I have attempted to find a fix for my issue via documentation online and one phone support ( not code level support ) call to no end. I could continue to try various things but would like to see if someone else has encountered this issue and a fix for it. Background: My Game app is live on App Store and has 1 classic leaderboard . I am now getting ready to submit an update to the app and it also entails adding a new recurring leaderboard. I added the leaderboard in App Store. I however have NOT uploaded my new build yet. I have also not added my leaderboards ( currently live and not live ) to any set. When I try to submit scores using GKLeaderboard.submitScore(_:context:player:leaderboardIDs:completionHandler:) to the new non-live leaderboard it works ( gives me no error ) When I try to load the scores from the new non-live leaderboard GKLeaderboard.loadLeaderboards(IDs:completionHandler:) loadEntries(for:timeScope:range:completionHandler:) it fails. Error: "leaderboardID not found" I could try ( and will ) uploading the new build to AppStore connect and associating the new leaderboard to it before testing again. try associating each leaderboard to a set Is there anything else that I should be aware of ? Thanks in advance

The solo Leveling:arise is a game but the game mode is not switching on and game crashing everything time while playing

Hello — I shipped an App Store build that signs in to Game Center using the Apple Unity Plugins (GameKit). The login banner appears, but my app still doesn’t show up in Game Center’s “All activity” (You started playing XXX 2d ago) What I’ve done Call await GKLocalPlayer.Authenticate(); “Game Center” is enabled for the current version in App Store Connect Confirmed: other App Store games do appear under “All Activity” on the same device/account Timeline: This is the first version that enables Game Center (not the app’s first release), and it has been about 2 hours since this build went live. Questions Is authentication alone sufficient for “Recently Played,” or is at least one Game Center component (leaderboards, achievements, activities, multiplayer) required? Is there a typical propagation delay before “Recently Played” starts showing a newly enabled app/version? Is there anything else I should configure in App Store Connect or entitlements to make “Recently Played” visible? Thanks for any help.

My experience has been that ModelEntity(named:in:) can be used to load a USD file with a simple structure consisting of entities and model entities, and, critically, it will flatten the entity hierarchy down to a single ModelEntity, presumably reducing the number of draw calls. However, can anyone verify that the following is true? If ModelEntity(named:in:) is used to load a USD file from a RealityKit content bundle, it may fail when the USD file contains more complex data, such as shader graph material definitions, or perhaps for some other reason. I am not sure. AND the error that ModelEntity(named:in:) throws in this case is Cannot load RealityKitContent entity: Failed to find resource with name "<name>" in bundle which would literally suggest that the file does not exist, instead of what I assume the error actually is, which is "the file exists but its entity hierarchy could not be flattened to a single ModelEntity" ? Is that an accurate description of the known behavior of ModelEntity:named:in:)? I understand that I could use Entity(named:in:) instead, without the flattening feature. My question is really more about the seemingly misleading error message. Thank you for any clarification you can provide.

I’m trying to create a CGContext that matches my screen using the following code let context = CGContext( data: pixelBuffer, width: pixelWidth, // 3456 height: pixelHeight, // 2234 bitsPerComponent: 10, // PixelEncoding = "--RRRRRRRRRRGGGGGGGGGGBBBBBBBBBB" bytesPerRow: bytesPerRow, // 13824 space: CGColorSpace(name: CGColorSpace.extendedSRGB)!, bitmapInfo: CGImageAlphaInfo.none.rawValue | CGImagePixelFormatInfo.RGBCIF10.rawValue | CGImageByteOrderInfo.order16Little.rawValue ) But it fails with an error CGBitmapContextCreate: unsupported parameter combination: RGB 10 bits/component, integer 13824 bytes/row kCGImageAlphaNone kCGImageByteOrder16Little kCGImagePixelFormatRGBCIF10 Valid parameters for RGB color space model are: 16 bits per pixel, 5 bits per component, kCGImageAlphaNoneSkipFirst 32 bits per pixel, 8 bits per component, kCGImageAlphaNoneSkipFirst 32 bits per pixel, 8 bits per component, kCGImageAlphaNoneSkipLast 32 bits per pixel, 8 bits per component, kCGImageAlphaPremultipliedFirst 32 bits per pixel, 8 bits per component, kCGImageAlphaPremultipliedLast 32 bits per pixel, 10 bits per component, kCGImageAlphaNone|kCGImagePixelFormatRGBCIF10|kCGImageByteOrder16Little 64 bits per pixel, 16 bits per component, kCGImageAlphaPremultipliedLast 64 bits per pixel, 16 bits per component, kCGImageAlphaNoneSkipLast 64 bits per pixel, 16 bits per component, kCGImageAlphaPremultipliedLast|kCGBitmapFloatComponents|kCGImageByteOrder16Little 64 bits per pixel, 16 bits per component, kCGImageAlphaNoneSkipLast|kCGBitmapFloatComponents|kCGImageByteOrder16Little 128 bits per pixel, 32 bits per component, kCGImageAlphaPremultipliedLast|kCGBitmapFloatComponents 128 bits per pixel, 32 bits per component, kCGImageAlphaNoneSkipLast|kCGBitmapFloatComponents See Quartz 2D Programming Guide (available online) for more information. Why is it unsupported if it matches the 6th option? (32 bits per pixel, 10 bits per component, kCGImageAlphaNone|kCGImagePixelFormatRGBCIF10|kCGImageByteOrder16Little)

I have a Mac Studio 2023 M2 Max Running Sonoma 14.6.1 Developing in XCode 16.1 It seems that the NSScreen frame settings may be incorrect. The frame settings received from NSScreen.screens don't seem to match up with the Desktop arrangement settings in the Settings. Apologies in advance for this long post! for screen in NSScreen.screens { let name = screen.localizedName Globals.logger.debug("Globals initializeScreens - screen \(i) '\(name, privacy: .public)'") Globals.logger.debug("Globals initializeScreens - '\(screen.debugDescription, privacy: .public)'") } This is what I receive in the log: Globals initializeScreens - '<NSScreen: 0x600000ef4240; name="PHL 346E2C"; backingScaleFactor=1.000000; frame={{0, 0}, {3440, 1440}}; visibleFrame={{0, 0}, {3440, 1415}}>' Globals initializeScreens - screen 2 'Blackmagic (1)' Globals initializeScreens - '<NSScreen: 0x600000ef42a0; name="Blackmagic (1)"; backingScaleFactor=1.000000; frame={{-3840, 0}, {1920, 1080}}; visibleFrame={{-3840, 0}, {1920, 1055}}>' Globals initializeScreens - screen 3 'Blackmagic (4)' Globals initializeScreens - '<NSScreen: 0x600000ef4360; name="Blackmagic (4)"; backingScaleFactor=1.000000; frame={{-1920, 0}, {1920, 1080}}; visibleFrame={{-1920, 0}, {1920, 1055}}>' Globals initializeScreens - screen 4 'Blackmagic (2)' Globals initializeScreens - '<NSScreen: 0x600000ef43c0; name="Blackmagic (2)"; backingScaleFactor=1.000000; frame={{5360, 0}, {1920, 1080}}; visibleFrame={{5360, 0}, {1920, 1055}}>' Globals initializeScreens - screen 5 'Blackmagic (3)' Globals initializeScreens - '<NSScreen: 0x600000ef4420; name="Blackmagic (3)"; backingScaleFactor=1.000000; frame={{3440, 0}, {1920, 1080}}; visibleFrame={{3440, 0}, {1920, 1055}}>' It looks like the frame settings for Blackmagic (2) and Blackmagic (4) are switched. The setup has five monitors. Four are using the USB-C Digital AV Multiport Adapters. The output for these are streamed into a rack of A/V equipment using BlackMagic Design mini converters and monitors. My Swift application allows users to open four movies, one for each of the AV Adapters. The movies can then be played back in sync for later processing by the A/V equipment. Here are some screen captures that show my display settings. Blackmagic (1) and Blackmagic (2) are to the left of the main screen. Blackmagic (3) and Blackmagic(4) are to the right of the main screen. The desktop is hard to see but is correct. The wallpaper settings are all correct. The wallpaper is correctly ordered when displayed on the monitors. After opening the movies and using the NSScreen frame settings, the displays are incorrectly ordered. Test B and Test D are switched, which is what I would expect given the NSScreen frame values. Any ideas? I've tried re-arranging the desktops, rebooting, etc. but no luck. The code that changes the screen location is similar to this post on Stack Overflow public func setDisplay( screen: NSScreen ) { Globals.logger.log("MovieWindowController - setDisplay = \(screen.localizedName, privacy: .public)") Globals.logger.debug("MovieWindowController - setDisplay - '\(screen.debugDescription, privacy: .public)'") let dx = CGFloat(Constants.midX) let dy = CGFloat(Constants.midY) var pos = NSPoint() pos.x = screen.visibleFrame.midX - dx pos.y = screen.visibleFrame.midY - dy Globals.logger.debug("MovieWindowController - setDisplay - x = '\(pos.x, privacy: .public)', y = '\(pos.y, privacy: .public)'") window?.setFrameOrigin(pos) } The log show just what I would expect given the incorrect frame values. MovieWindowController - setDisplay = Blackmagic (1) MovieWindowController - setDisplay - '<NSScreen: 0x6000018e8420; name="Blackmagic (1)"; backingScaleFactor=1.000000; frame={{-3840, 0}, {1920, 1080}}; visibleFrame={{-3840, 0}, {1920, 1055}}>' MovieWindowController - setDisplay - x = '-3840.000000', y = '-12.500000' MovieWindowController - setDisplay = Blackmagic (2) MovieWindowController - setDisplay - '<NSScreen: 0x6000018a10e0; name="Blackmagic (2)"; backingScaleFactor=1.000000; frame={{5360, 0}, {1920, 1080}}; visibleFrame={{5360, 0}, {1920, 1055}}>' MovieWindowController - setDisplay - x = '5360.000000', y = '-12.500000' MovieWindowController - setDisplay = Blackmagic (3) MovieWindowController - setDisplay - '<NSScreen: 0x6000018cc8a0; name="Blackmagic (3)"; backingScaleFactor=1.000000; frame={{3440, 0}, {1920, 1080}}; visibleFrame={{3440, 0}, {1920, 1055}}>' MovieWindowController - setDisplay - x = '3440.000000', y = '-12.500000' MovieWindowController - setDisplay = Blackmagic (4) MovieWindowController - setDisplay - '<NSScreen: 0x6000018c9ce0; name="Blackmagic (4)"; backingScaleFactor=1.000000; frame={{-1920, 0}, {1920, 1080}}; visibleFrame={{-1920, 0}, {1920, 1055}}>' MovieWindowController - setDisplay - x = '-1920.000000', y = '-12.500000' Am I correct? I think this is driving me crazy! Thanks in advance! Edit: The mouse behavior is correct in moving across the displays!

I have used SceneKit for several years but recently have a problem where a scene with fewer than 50 nodes is partially drawn, i.e., some nodes are, some aren't, and greater than 50 nodes are always draw correctly. This seems to have happened since concurrency was introduced. (w.r.t. concurrency, I had been using DispatchQueue successfully before then.) Since all nodes (few or many) are constructed and implemented by the same functions etc. I'm baffled. When I print the node hierarchy all nodes are present whether few or many. SceneView() has [.rendersContinually] option selected. Every node created (few or many) has .opacity = 1.0, .isHidden = false I haven't tried setting-back the compiler version as that is not a long term solution, and I know the same code worked fine then.

Hello, Thank you for attending today’s Metal & game technologies group lab at WWDC25! We were delighted to answer many questions from developers and energized by the community engagement. We hope you enjoyed it and welcome your feedback. We invite you to carry on the conversation here, particularly if your question appeared in Slido and we were unable to answer it during the lab. If your question received feedback let us know if you need clarification. You may want to ask your question again in a different lab e.g. visionOS tomorrow. (We realize that this can be confusing when frameworks interoperate) We have a lot to learn from each other so let’s get to Q&A and make the best of WWDC25! 😃 Looking forward to your questions posted in new threads.

our app is live, and it appears that since the ios 18 update - the VideoMaterial renders pink / purple color instead of the video (picture attached). the audio is rendered properly. we found that it occurs on old devices: iPhone 11 & iPhone SE 2020. I've found this thread of Andy Jazz on stackoverflow: Steps to Reproduce: Create a plane for the video screen. Apply a VideoMaterial using AVPlayerItem. Anchor the model entity to an ARImageAnchor. Expected Outcome: The video should play as a material on the plane in RealityKit. Actual Outcome: On iOS 18, the plane appears pink, indicating the VideoMaterial isn’t applied. What I’ve Tried: -Verified the video URL is correct. -Checked that the AVPlayerItem and VideoMaterial are initialised correctly. -Ensured the AVPlayer is playing the video. I also tried different formats (mov / mp4 / m4v), and verifying that the video's status is readyToPlay. any suggestions?

What is Game Mode? Game Mode optimizes your gaming experience by giving your game the highest priority access to your CPU and GPU, lowering usage for background tasks. And it doubles the Bluetooth sampling rate, which reduces input latency and audio latency for wireless accessories like game controllers and AirPods. See Use Game Mode on Mac See Port advanced games to Apple platforms How can I enable Game Mode in my game? Add the Supports Game Mode property (GCSupportsGameMode) to your game’s Info.plist and set to true Correctly identify your game’s Application Category with LSApplicationCategoryType (also Info.plist) Note: Enabling Game Mode makes your game eligible but is not a guarantee; the OS decides if it is ok to enable Game Mode at runtime An app that enables Game Mode but isn’t a game will be rejected by App Review. How can I disable Game Mode? Set GCSupportsGameMode to false. Note: On Mac Game Mode is automatically disabled if the game isn’t running full screen.

let dic : [AnyHashable:Any] = [ kCGPDFXRegistryName: "http://www.color.org" as CFString, kCGPDFXOutputConditionIdentifier: "FOGRA43" as CFString, kCGPDFContextOutputIntent: "GTS_PDFX" as CFString, kCGPDFXOutputIntentSubtype: "GTS_PDFX" as CFString, kCGPDFContextCreateLinearizedPDF: "" as CFString, kCGPDFContextCreatePDFA: "" as CFString, kCGPDFContextAuthor: "Placeholder" as CFString, kCGPDFContextCreator: "Placeholder" as CFString ] Hello, Now I would like to export my PDF's as PDF/A. In my opinion, there is also the right option for this under Core Graphics. Unfortunately, the documentation does not show what is 'kCGPDFContextCreatePDFA' or 'kCGPDFContextLinearizedPDF' for a stringvalue is required. What I have already tried: GTS_PDFA1 , PDF/A-1, true as CFString. (Above my CFDictionary. ...Author e.g are working perfectly.) In the Finder you can see these two options, which I would also like to implement in my app. Thank you in advance!

I didn't find a suggestion box on Swift's website so I'll post it here. SwiftCharts are great but limited. I need more data on a single chart. Candlestick and OHLC type charts would be an excellent addition. Hopefully, influencers from Apple can make that happen. Thanks.

I'm new here so I don't know what's this function belongs to which topic... Sorry about that! I watched the WWDC stream and I am really interested in this function, I'm wondering if this function could be used in my apps. I looked up the document but I find it only support visionOS(i'm not sure about that, but I saw the demo is base on the visionOS)

Hi everyone, I’m developing an iPad app that will be running continuously with the screen always on — similar to a restaurant ordering system. I understand that some of the newer iPad Pro models are equipped with OLED displays. I'm concerned about the potential risk of screen burn-in due to static UI elements being displayed for extended periods. Does burn-in occur on the OLED iPad Pro models under such usage? Would it be advisable to implement a screen saver or periodically animate/change parts of the UI to prevent this? Any insights or best practices would be greatly appreciated. Thank you!

Hi , My application meet below crash backtrace at very low repro rate from the public users, i do not see it relate to a specific iOS version or iPhone model. The last code line from my application is calling CAMetalLayer nextDrawable API. I did some basic studying, suppose it may relate to the wrong CAMetaLayer configuration, like frame property w or h <= 0.0 bounds property w or h <= 0.0 drawableSize w or h <= 0.0 or w or h > max value (like 16384) Not sure my above thinking is right or not? Will the UIView which my CAMetaLayer attached will cause such nextDrawable crash or not ? Thanks a lot Main Thread - Crashed libsystem_kernel.dylib __pthread_kill libsystem_c.dylib abort libsystem_c.dylib __assert_rtn Metal MTLReportFailure.cold.1 Metal MTLReportFailure Metal _MTLMessageContextEnd Metal -[MTLTextureDescriptorInternal validateWithDevice:] AGXMetalA13 0x245b1a000 + 4522096 QuartzCore allocate_drawable_texture(id<MTLDevice>, __IOSurface*, unsigned int, unsigned int, MTLPixelFormat, unsigned long long, CAMetalLayerRotation, bool, NSString*, unsigned long) QuartzCore get_unused_drawable(_CAMetalLayerPrivate*, CAMetalLayerRotation, bool, bool) QuartzCore CAMetalLayerPrivateNextDrawableLocked(CAMetalLayer*, CAMetalDrawable**, unsigned long*) QuartzCore -[CAMetalLayer nextDrawable] SpaceApp -[MetalRender renderFrame:] MetalRenderer.mm:167 SpaceApp -[FrameBuffer acceptFrame:] VideoRender.mm:173 QuartzCore CA::Display::DisplayLinkItem::dispatch_(CA::SignPost::Interval<(CA::SignPost::CAEventCode)835322056>&) QuartzCore CA::Display::DisplayLink::dispatch_items(unsigned long long, unsigned long long, unsigned long long) QuartzCore CA::Display::DisplayLink::dispatch_deferred_display_links(unsigned int) UIKitCore _UIUpdateSequenceRun UIKitCore schedulerStepScheduledMainSection UIKitCore runloopSourceCallback CoreFoundation __CFRUNLOOP_IS_CALLING_OUT_TO_A_SOURCE0_PERFORM_FUNCTION__ CoreFoundation __CFRunLoopDoSource0 CoreFoundation __CFRunLoopDoSources0 CoreFoundation __CFRunLoopRun CoreFoundation CFRunLoopRunSpecific GraphicsServices GSEventRunModal UIKitCore -[UIApplication _run] UIKitCore UIApplicationMain

Description: In the official visionOS 26 Hover Effect sample code project , I encountered an issue where the event.trackingAreaIdentifier returned by onSpatialEvent does not reset as expected. Steps to Reproduce: Select an object with trackingAreaID = 6 in the sample app. Look at a blank space (outside any tracking area) and perform a pinch gesture . Expected Behavior: The event.trackingAreaIdentifier should return 0 when interacting with a non-tracking area. Actual Behavior: The event.trackingAreaIdentifier still returns 6, even after restarting the app or killing the process. This persists regardless of where the pinch gesture is performed

End goal: to detect 3 lines, and 2 corners accurately. Trying contours but they are a bit off. Is there a way or settings in contours to detect corners and lines more accurately, maybe less an sharper edged/corner contours? Or some other API or methods please? I would love an email please ;) thank you. 2. also an overlay/scale issue

After many former OS and Xcode updates, my Game Controller Swift code generates a "DIS-CONNECTED" MESSAGE. Mac Sequoia 15.2 Xcode 16.2 Tried to update PlayStation controller firmware on my Mac. Still no luck with Xcode and its use of a game controller with tvOS.

Had anyone experienced convexCast causing a crash and what might be behind it? Here's the call stack: