Hey everyone, I'm encountering an issue with audio sample rate conversion that I'm hoping someone can help with. Here's the breakdown: Issue Description: I've installed a tap on an input device to convert audio to an optimal sample rate. There's a converter node added on top of this setup. The problem arises when joining Zoom or FaceTime calls—the converter gets deallocated from memory, causing the program to crash. Symptoms: The converter node is being deallocated during video calls. The program crashes entirely when this happens. Traditional methods of monitoring sample rate changes (tracking nominal or actual sample rates) aren't working as expected. The Big Challenge: I can't figure out how to properly monitor sample rate changes. Listeners set up to track these changes don't trigger when the device joins a Zoom or FaceTime call. Please, if anyone has experience with this or knows a solution, I'd really appreciate your help. Thanks in advance! ⁠

My current app implements a custom video player, based on a AVSampleBufferRenderSynchronizer synchronising two renderers: an AVSampleBufferDisplayLayer receiving decoded CVPixelBuffer-based video CMSampleBuffers, and an AVSampleBufferAudioRenderer receiving decoded lpcm-based audio CMSampleBuffers. The AVSampleBufferRenderSynchronizer is started when the first image (in presentation order) is decoded and enqueued, using avSynchronizer.setRate(_ rate: Float, time: CMTime), with rate = 1 and time the presentation timestamp of the first decoded image. Presentation timestamps of video and audio sample buffers are consistent, and on most streams, the audio and video are correctly synchronized. However on some network streams, on iOS, the audio and video aren't synchronized, with a time difference that seems to increase with time. On the other hand, with the same player code and network streams on macOS, the synchronization always works fine. This reminds me of something I've read, about cases where an AVSampleBufferRenderSynchronizer could not synchronize audio and video, causing them to run with independent and potentially drifting clocks, but I cannot find it again. So, any help / hints on this sync problem will be greatly appreciated! :)

I have an AUv3 that passes all validation and can be loaded into Logic Pro without issue. The UI for the plug in can be any aspect ratio but Logic insists on presenting it in a view with a fixed aspect ratio. That is when resizing, both the height and width are resized. I have never managed to work out what it is I need to do specify to Logic to allow the user to resize width or height independently of each other. Can anyone tell me what I need to specify in the AU code that will inform Logic that the view can be resized from any side of the window/panel?

I work on an iOS app that records video and audio. We've been getting reports for a while from users who are experiencing their video recordings being cut off. After investigating, I found that many users are receiving the AVAudioSessionMediaServicesWereResetNotification (.mediaServicesWereResetNotification) notification while recording. It's associated with the AVFoundationErrorDomain[-11819] error, which seems to indicate that the system audio daemon crashed. We have a handler registered to end the recording, show the user a prompt, and restart our AV sessions. However, from our logs this looks to be happening to hundreds of users every day and it's not an ideal user experience, so I would like to figure out why this is happening and if it's due to something that we're doing wrong. The debug menu option to trigger the audio session reset is not of much use, because it can't be triggered unless you leave the app and go to system settings. So our app can't be recording video when the debug reset is triggered. So far I haven't found a way to reproduced the issue locally, but I can see that it's happening to users from logs. I've found some posts online from developers experiencing similar issues, but none of them seem to directly address our issue. The system error doesn't include a userInfo dictionary, and as far as I can tell it's a system daemon crash so any logs would need to be captured from the OS. Is there any way that I could get more information about what may be causing this error that I may have missed?

Hello, I'm observing an intermittent memory leak being reported in the iOS Simulator when initializing and starting an AVAudioEngine. Even with minimal setup—just attaching a single AVAudioPlayerNode and connecting it to the mainMixerNode—Xcode's memory diagnostics and Instruments sometimes flag a leak. Here is a simplified version of the code I'm using: // This function is called when the user taps a button in the view controller: #import "ViewController.h" @interface ViewController () @end @implementation ViewController - (void)viewDidLoad { [super viewDidLoad]; } - (IBAction)myButtonAction:(id)sender { NSLog(@"Test"); soundCreate(); } @end // media.m static AVAudioEngine *audioEngine = nil; void soundCreate(void) { if (audioEngine != nil) return; [[AVAudioSession sharedInstance] setCategory:AVAudioSessionCategoryAmbient error:nil]; [[AVAudioSession sharedInstance] setActive:YES error:nil]; audioEngine = [[AVAudioEngine alloc] init]; AVAudioPlayerNode* playerNode = [[AVAudioPlayerNode alloc] init]; [audioEngine attachNode:playerNode]; [audioEngine connect:playerNode to:(AVAudioNode *)[audioEngine mainMixerNode] format:nil]; [audioEngine startAndReturnError:nil]; } In the memory leak report, the following call stack is repeated, seemingly in a loop: ListenerMap::InsertEvent(XAudioUnitEvent const&, ListenerBinding*) AudioToolboxCore ListenerMap::AddParameter(AUListener*, void*, XAudioUnitEvent const&) AudioToolboxCore AUListenerAddParameter AudioToolboxCore addOrRemoveParameterListeners(OpaqueAudioComponentInstance*, AUListenerBase*, AUParameterTree*, bool) AudioToolboxCore 0x180178ddf

I have a simple AVAudioEngine graph as follows: AVAudioPlayerNode -> AVAudioUnitEQ -> AVAudioUnitTimePitch -> AVAudioUnitReverb -> Main mixer node of AVAudioEngine. I noticed that whenever I have AVAudioUnitTimePitch or AVAudioUnitVarispeed in the graph, I noticed a very distinct crackling/popping sound in my Airpods Pro 2 when starting up the engine and playing the AVAudioPlayerNode and unable to find the reason why this is happening. When I remove the node, the crackling completely goes away. How do I fix this problem since i need the user to be able to control the pitch and rate of the audio during playback. import AVKit @Observable @MainActor class AudioEngineManager { nonisolated private let engine = AVAudioEngine() private let playerNode = AVAudioPlayerNode() private let reverb = AVAudioUnitReverb() private let pitch = AVAudioUnitTimePitch() private let eq = AVAudioUnitEQ(numberOfBands: 10) private var audioFile: AVAudioFile? private var fadePlayPauseTask: Task<Void, Error>? private var playPauseCurrentFadeTime: Double = 0 init() { setupAudioEngine() } private func setupAudioEngine() { guard let url = Bundle.main.url(forResource: "Song name goes here", withExtension: "mp3") else { print("Audio file not found") return } do { audioFile = try AVAudioFile(forReading: url) } catch { print("Failed to load audio file: \(error)") return } reverb.loadFactoryPreset(.mediumHall) reverb.wetDryMix = 50 pitch.pitch = 0 // Increase pitch by 500 cents (5 semitones) engine.attach(playerNode) engine.attach(pitch) engine.attach(reverb) engine.attach(eq) // Connect: player -> pitch -> reverb -> output engine.connect(playerNode, to: eq, format: audioFile?.processingFormat) engine.connect(eq, to: pitch, format: audioFile?.processingFormat) engine.connect(pitch, to: reverb, format: audioFile?.processingFormat) engine.connect(reverb, to: engine.mainMixerNode, format: audioFile?.processingFormat) } func prepare() { guard let audioFile else { return } playerNode.scheduleFile(audioFile, at: nil) } func play() { DispatchQueue.global().async { [weak self] in guard let self else { return } engine.prepare() try? engine.start() DispatchQueue.main.async { [weak self] in guard let self else { return } playerNode.play() fadePlayPauseTask?.cancel() playPauseCurrentFadeTime = 0 fadePlayPauseTask = Task { [weak self] in guard let self else { return } while true { let volume = updateVolume(for: playPauseCurrentFadeTime / 0.1, rising: true) // Ramp up volume until 1 is reached if volume >= 1 { break } engine.mainMixerNode.outputVolume = volume try await Task.sleep(for: .milliseconds(10)) playPauseCurrentFadeTime += 0.01 } engine.mainMixerNode.outputVolume = 1 } } } } func pause() { fadePlayPauseTask?.cancel() playPauseCurrentFadeTime = 0 fadePlayPauseTask = Task { [weak self] in guard let self else { return } while true { let volume = updateVolume(for: playPauseCurrentFadeTime / 0.1, rising: false) // Ramp down volume until 0 is reached if volume <= 0 { break } engine.mainMixerNode.outputVolume = volume try await Task.sleep(for: .milliseconds(10)) playPauseCurrentFadeTime += 0.01 } engine.mainMixerNode.outputVolume = 0 playerNode.pause() // Shut down engine once ramp down completes DispatchQueue.global().async { [weak self] in guard let self else { return } engine.pause() } } } private func updateVolume(for x: Double, rising: Bool) -> Float { if rising { // Fade in return Float(pow(x, 2) * (3.0 - 2.0 * (x))) } else { // Fade out return Float(1 - (pow(x, 2) * (3.0 - 2.0 * (x)))) } } func setPitch(_ value: Float) { pitch.pitch = value } func setReverbMix(_ value: Float) { reverb.wetDryMix = value } } struct ContentView: View { @State private var audioManager = AudioEngineManager() @State private var pitch: Float = 0 @State private var reverb: Float = 0 var body: some View { VStack(spacing: 20) { Text("🎵 Audio Player with Reverb & Pitch") .font(.title2) HStack { Button("Prepare") { audioManager.prepare() } Button("Play") { audioManager.play() } .padding() .background(Color.green) .foregroundColor(.white) .cornerRadius(10) Button("Pause") { audioManager.pause() } .padding() .background(Color.red) .foregroundColor(.white) .cornerRadius(10) } VStack { Text("Pitch: \(Int(pitch)) cents") Slider(value: $pitch, in: -2400...2400, step: 100) { _ in audioManager.setPitch(pitch) } } VStack { Text("Reverb Mix: \(Int(reverb))%") Slider(value: $reverb, in: 0...100, step: 1) { _ in audioManager.setReverbMix(reverb) } } } .padding() } }

I'm developing a TTS Audio Unit Extension that needs to write trace/log files to a shared App Group container. While the main app can successfully create and write files to the container, the extension gets sandbox denied errors despite having proper App Group entitlements configured. Setup: Main App (Flutter) and TTS Audio Unit Extension share the same App Group App Group is properly configured in developer portal and entitlements Main app successfully creates and uses files in the container Container structure shows existing directories (config/, dictionary/) with populated files Both targets have App Group capability enabled and entitlements set Current behavior: Extension can access/read the App Group container Extension can see existing directories and files All write attempts are blocked with "sandbox deny(1) file-write-create" errors Code example: const char* createSharedGroupPathWithComponent(const char* groupId, const char* component) { NSString* groupIdStr = [NSString stringWithUTF8String:groupId]; NSString* componentStr = [NSString stringWithUTF8String:component]; NSURL* url = [[NSFileManager defaultManager] containerURLForSecurityApplicationGroupIdentifier:groupIdStr]; NSURL* fullPath = [url URLByAppendingPathComponent:componentStr]; NSError *error = nil; if (![[NSFileManager defaultManager] createDirectoryAtPath:fullPath.path withIntermediateDirectories:YES attributes:nil error:&amp;error]) { NSLog(@"Unable to create directory %@", error.localizedDescription); } return [[fullPath path] UTF8String]; } Error output: Sandbox: simaromur-extension(996) deny(1) file-write-create /private/var/mobile/Containers/Shared/AppGroup/36CAFE9C-BD82-43DD-A962-2B4424E60043/trace Key questions: Are there additional entitlements required for TTS Audio Unit Extensions to write to App Group containers? Is this a known limitation of TTS Audio Unit Extensions? What is the recommended way to handle logging/tracing in TTS Audio Unit Extensions? If writing to App Group containers is not supported, what alternatives are available? Current entitlements: &lt;dict&gt; &lt;key&gt;com.apple.security.application-groups&lt;/key&gt; &lt;array&gt; &lt;string&gt;group.com.&lt;company&gt;.&lt;appname&gt;&lt;/string&gt; &lt;/array&gt; &lt;/dict&gt;

Hi, our CourAudio server plugin utilizes the SystemConfiguration.framework to store and restore specific shared system wide settings. While our application can authenticate to utilize the SystemConfiguration.framework to gain write access to the shared configuration settings the CoreAudio server plugin obviously can't have any user interaction and therefor does not authenticate. Is it possible to authenticate the CoreAudio server plugin to gain write permissions? Are there any entitlements or other means that would allow this? Thanks!

Hello everyone, I am working on an app that allows you to review your own music using Apple Music. Currently I am running into an issue with the skipping forwards and backwards outside of the app. How it should work: When skipping forward or backwards on the lock or home screen of an iPhone, the next or previous song on an album should play and the information should change to reflect that in the app. If you play a song in Apple Music, you can see a Now Playing view in the lock screen. When you skip forward or backwards, it will do either action and it would reflect that when you see a little frequency icon on artwork image of a song. What it's doing: When skipping forward or backwards on the lock or home screen of an iPhone, the next or previous song is reflected outside of the app, but not in the app. When skipping a song outside of the app, it works correctly to head to the next song. But when I return to the app, it is not reflected NOTE: I am not using MusicKit variables such as Track, Album to display the songs. Since I want to grab the songs and review them I need a rating so I created my own that grabs the MusicItemID, name, artist(s), etc. NOTE: I am using ApplicationMusicPlayer.shared Is there a way to get the song to reflect in my app? (If its easier, a simple example of it would be nice. No need to create an entire xprod file)

According to the header file the outputVolume properties supported range is 0.0-1.0: /*! @property outputVolume @abstract The mixer's output volume. @discussion This accesses the mixer's output volume (0.0-1.0, inclusive). @property (nonatomic) float outputVolume; However when setting the volume to 2.0 the audio does indeed play louder. Is the header file out of date and if so, what is the supported range for outputVolume? Thanks

I'm working on adding CarPlay support to an audio app and am running into an issue. Occasionally, when a user opens the app from CarPlay while the main app scene is either not connected or is currently in the background, I will receive an error when attempting to activate the audio session. The code below mimics my setup: do { try AVAudioSession.sharedInstance().setCategory(.playback, mode: .spokenAudio) try AVAudioSession.sharedInstance().setActive(true) } catch { print(error) // NSOSStatusErrorDomain - 560557684: Session activation failed } That error code maps to AVAudioSession.ErrorCode.cannotInterruptOthers. Once in this state, all subsequent attempts to play different pieces of content will fail. However, things will start working normally if the user opens the app on their phone and tries again from CarPlay (while the app is in the foreground on their phone). I'm not sure why it would behave this way and want to note that I do have the audio background mode capability enabled. Has anyone else encountered this? Are there any workarounds or changes I could make to prevent this from happening?

I am developing an app that uses MusicKit to play music and then I need to have spoken words played to the user, while ducking the audio coming from MusicKit (application music player) the built in Siri voices are not off sufficient quality so I am using an external service to create an mp3 file and then play this back using AVAudioSession Sample code below the problem I am having is that .duckOthers is not ducking the Application Music Player output Is this a bug or am I doing this wrong? // Configure audio session for system-wide ducking try AVAudioSession.sharedInstance().setCategory(.playback, mode: .spokenAudio, options: [.duckOthers, .mixWithOthers]) try AVAudioSession.sharedInstance().setActive(true) // Set the ducking level to maximum try AVAudioSession.sharedInstance().setPreferredIOBufferDuration(0.005) // Create and configure audio player self.audioPlayer = try AVAudioPlayer(data: audioData) self.audioPlayer?.delegate = self self.audioPlayer?.volume = 1.0 // Ensure full volume for speech self.audioPlayer?.prepareToPlay() // Set the audio player's settings for maximum clarity self.audioPlayer?.enableRate = false self.audioPlayer?.pan = 0.0 // Center the audio self.audioPlayer?.play()

Hi, In my project I am using AVFoundation for recording the audio. We are using AVAudioMixerNode class below method to record the audio packet. **func installTap( onBus bus: AVAudioNodeBus, bufferSize: AVAudioFrameCount, format: AVAudioFormat?, block tapBlock: @escaping AVAudioNodeTapBlock ) ** It works perfectly fine. But in production env some small percentage of the user we are facing issue like after recording few packets it stops automatically without stopping the audio engine. Can anyone help here that why this happens? I have also observed for mediaServicesWereResetNotification and added log on receiving this notification but when this issue happens I don't see any occurence of this log. Also is there any callback when the engine stops?

Does anyone know how to pronounce the sound of a specific instrument when you tap a button on the screen on your iPhone or iPad? Now, in the middle of creating a music learning app, I'm thinking of assigning monotones or chords to the button-like frames on the keyboard and fingerboard on the screen. Can it be achieved with SwiftUI chords alone? Once upon a time, MIDI level 1 I remember that there was a pronunciation function of the instrument, but I don't think about implementing the same function in the current OS. Please lend me your wisdom.

I've got a problem with my app where I'm testing it on my own phone. I'm using audio kit to generate tones as part of the app. Everything seems to work fine. Sounds start, Stop, etc. They play when the app is closed and when the phone is locked, so background is working. However, I'm seeing an issue where, even when STOP is pressed and the application exited, if I get a notification such as a text message, the base tone for the app starts to play. If I then open the app, check the Start/Stop button - it says start so that. hasnt' been activated. If I click Start, then a 2nd tone starts. This one stops with the Stop button. However the original tone that was set off by an incoming message carries on playing. Until I go to the Open Apps View on the phone and slide the application upwards. For the life of me, I can't figure out whats happening here.

Hello, i can successfully match music using shazamkit on Apple using SwiftUI, a simple app that let user to load an audio file and exctracts the relative match, while i am unable to match music using shamzamkit on Android. I am trying to make the same simple app but i cannot match music as i get MATCH_ATTEMPT_FAILED every time i try to. I don't know what i am doing wrong but the shazam part in the kotlin Android code is in this method : suspend fun processAudioFileInBackground( filePath: String, developerTokenProvider: DeveloperTokenProvider ) = withContext(Dispatchers.IO) { val bufferSize = 1024 * 1024 val audioFile = FileInputStream(filePath) val byteBuffer = ByteBuffer.allocate(bufferSize) byteBuffer.order(ByteOrder.LITTLE_ENDIAN) var bytesRead: Int while (audioFile.read(byteBuffer.array()).also { bytesRead = it } != -1) { val signatureGenerator = (ShazamKit.createSignatureGenerator(AudioSampleRateInHz.SAMPLE_RATE_44100) as ShazamKitResult.Success).data signatureGenerator.append(byteBuffer.array(), bytesRead, System.currentTimeMillis()) val signature = signatureGenerator.generateSignature() println("Signature: ${signature.durationInMs}") val catalog = ShazamKit.createShazamCatalog(developerTokenProvider, Locale.ENGLISH) val session = (ShazamKit.createSession(catalog) as ShazamKitResult.Success).data val matchResult = session.match(signature) println("MatchResult : $matchResult") setMatchResult(matchResult) byteBuffer.clear() } audioFile.close() } I noticed that changing Locale in catalog creation results in different result as i get NoMatch without exception. Can you please help me with this? Do i need to create a custom catalog?

Hello! I'm experiencing an issue with iOS's audio routing system when trying to use Bluetooth headphones for audio output while also recording environmental audio from the built-in microphone. Desired behavior: Play audio through Bluetooth headset (AirPods) Record unprocessed environmental audio from the iPhone's built-in microphone Actual behavior: When explicitly selecting the built-in microphone, iOS reports it's using it (in currentRoute.inputs) However, the actual audio data received is clearly still coming from the AirPods microphone The audio is heavily processed with voice isolation/noise cancellation, removing environmental sounds Environment Details Device: iPhone 12 Pro Max iOS Version: 18.4.1 Hardware: AirPods Audio Framework: AVAudioEngine (also tried AudioQueue) Code Attempted I've tried multiple approaches to force the correct routing: func configureAudioSession() { let session = AVAudioSession.sharedInstance() // Configure to allow Bluetooth output but use built-in mic try? session.setCategory(.playAndRecord, options: [.allowBluetoothA2DP, .defaultToSpeaker]) try? session.setActive(true) // Explicitly select built-in microphone if let inputs = session.availableInputs, let builtInMic = inputs.first(where: { $0.portType == .builtInMic }) { try? session.setPreferredInput(builtInMic) print("Selected input: \(builtInMic.portName)") } // Log the current route let route = session.currentRoute print("Current input: \(route.inputs.first?.portName ?? "None")") // Configure audio engine with native format let inputNode = audioEngine.inputNode let nativeFormat = inputNode.inputFormat(forBus: 0) inputNode.installTap(onBus: 0, bufferSize: 1024, format: nativeFormat) { buffer, time in // Process audio buffer // Despite showing "Built-in Microphone" in route, audio appears to be // coming from AirPods with voice isolation applied - welp! } try? audioEngine.start() } I've also tried various combinations of: Different audio session modes (.default, .measurement, .voiceChat) Different option combinations (with/without .allowBluetooth, .allowBluetoothA2DP) Setting session.setPreferredInput() both before and after activation Diagnostic Observations When AirPods are connected: AVAudioSession.currentRoute.inputs correctly shows "Built-in Microphone" after setPreferredInput() The actual audio data received shows clear signs of AirPods' voice isolation processing Background/environmental sounds are actively filtered out... When recording a test audio played near the phone (not through the app), the recording is nearly silent. Only headset voice goes through. Questions Is there a workaround to force iOS to actually use the built-in microphone while maintaining Bluetooth output? Are there any lower-level configurations that might resolve this issue? Any insights, workarounds, or suggestions would be greatly appreciated. This is blocking a critical feature in my application that requires environmental audio recording while providing audio feedback through headphones 😅

Hello, I'm trying to receive parquet files using the example that provided in documentation. I've done all required steps but receive constantly error 500 with "Upstream Service Error". By looking into the issues list, seems this error exists for months. Is it possible to get it working?

I'm using an AVAudioConverter object to decode an OPUS stream for VoIP. The decoding itself works well, however, whenever the stream stalls (no more audio packet is available to decode because of network instability) this can be heard in crackling / abrupt stop in decoded audio. OPUS can mitigate this by indicating packet loss by passing a null pointer in the C-library to int opus_decode_float (OpusDecoder * st, const unsigned char * data, opus_int32 len, float * pcm, int frame_size, int decode_fec), see https://opus-codec.org/docs/opus_api-1.2/group__opus__decoder.html#ga9c554b8c0214e24733a299fe53bb3bd2. However, with AVAudioConverter using Swift I'm constructing an AVAudioCompressedBuffer like so:         let compressedBuffer = AVAudioCompressedBuffer(             format: VoiceEncoder.Constants.networkFormat,             packetCapacity: 1,             maximumPacketSize: data.count         )         compressedBuffer.byteLength = UInt32(data.count)         compressedBuffer.packetCount = 1   compressedBuffer.packetDescriptions! .pointee.mDataByteSize = UInt32(data.count)         data.copyBytes(             to: compressedBuffer.data .assumingMemoryBound(to: UInt8.self),             count: data.count         ) where data: Data contains the raw OPUS frame to be decoded. How can I specify data loss in this context and cause the AVAudioConverter to output PCM data whenever no more input data is available? More context: I'm specifying the audio format like this:         static let frameSize: UInt32 = 960         static let sampleRate: Float64 = 48000.0         static var networkFormatStreamDescription = AudioStreamBasicDescription(             mSampleRate: sampleRate,             mFormatID: kAudioFormatOpus,             mFormatFlags: 0,             mBytesPerPacket: 0,             mFramesPerPacket: frameSize,             mBytesPerFrame: 0,             mChannelsPerFrame: 1,             mBitsPerChannel: 0,             mReserved: 0         )         static let networkFormat = AVAudioFormat( streamDescription: &networkFormatStreamDescription )! I've tried 1) setting byteLength and packetCount to zero and 2) returning nil but setting .haveData in the AVAudioConverterInputBlock I'm using with no success.

Hello, Has anyone else experienced variations in the accuracy of the playbackTime value? After a few seconds of playback, the reported time adjusts by a fraction of a second, making it difficult to calculate the actual playbackTime of the audio. This can be recreated by playing a song in MusicKit, recording the start time of the audio, playing for at least 10-20 seconds, and then comparing the playbackTime value to one calculated using the start time of the audio. In my experience this jump occurs after about 10 seconds of playback. Any help would be appreciated. Thanks!