I have an iPadOS M-processor application with two different running configurations. In config1, the shared AVAudioSession is configured for .videoChat mode using the built-in microphone. The input/output nodes of the AVAudioEngine are configured with voice processing enabled. The built-in mic is formatted for 1 channel at 48KHz. In config2, the shared AVAudioSession is configured for .measurement mode using an external USB microphone. The input/output nodes of the AVAudioEngine are configured with voice processing disabled. The external mic is formatted for 2 channels at 44.1KHz I've written a configuration manager designed to safely switch between these two configurations. It works by stopping AVAudioEngine and detaching all but the input and output nodes, updating the shared audio session for the desired mic and sample-rates, and setting the appropriate state for voice processing to either true or false as required by the configuration. Finally the new audio graph is constructed by attaching appropriate nodes, connecting them, and re-starting AVAudioEngine I'm experiencing what I believe is a race-condition between switching voice processing on or off and then trying to re-build and start the new audio graph. Even though notifications, which are dumped to the console indicate that my requested input and sample-rate settings are in place, I crash when trying to start the audio engine because the sample-rate is wrong. Investigating further it looks like the switch from remote I/O to voice-processing I/O or vice-versa has not yet actually completed. I introduced a 100ms second delay and that seems to help but is obviously not a reliable way to build software that must work consistently. How can I make sure that what are apparently asynchronous configuration changes to the shared audio session and the input/output nodes have completed before I go on? I tried using route change notifications from the shared AVAudioSession but these lie. They say my preferred mic input and sample-rate setting is in place but when I dump the AVAudioEngine graph to the debugger console, I still see the wrong sample rate assigned to the input/output nodes. Also these are the wrong AU nodes. That is, VPIO is still in place when RIO should be, or vice-versa. How can I make the switch reliable without arbitrary time delays? Is my configuration manager approach appropriate (question for Apple engineers)?

Hi, I'm trying to setup a AVAudioEngine for USB Audio recording and monitoring playthrough. As soon as I try to setup playthough I get an error in the console: AVAEInternal.h:83 required condition is false: [AVAudioEngineGraph.mm:1361:Initialize: (IsFormatSampleRateAndChannelCountValid(outputHWFormat))] Any ideas how to fix it? // Input-Device setzen try? setupInputDevice(deviceID: inputDevice) let input = audioEngine.inputNode // Stereo-Format erzwingen let inputHWFormat = input.inputFormat(forBus: 0) let stereoFormat = AVAudioFormat(commonFormat: inputHWFormat.commonFormat, sampleRate: inputHWFormat.sampleRate, channels: 2, interleaved: inputHWFormat.isInterleaved) guard let format = stereoFormat else { throw AudioError.deviceSetupFailed(-1) } print("Input format: \(inputHWFormat)") print("Forced stereo format: \(format)") audioEngine.attach(monitorMixer) audioEngine.connect(input, to: monitorMixer, format: format) // MonitorMixer -> MainMixer (Output) // Problem here, format: format also breaks. audioEngine.connect(monitorMixer, to: audioEngine.mainMixerNode, format: nil)

Hi everyone 👋 I’m building an iOS app in Swift where I want to do the following: Record the user’s voice Transcribe the spoken sentence (speech-to-text) Auto-detect the spoken language Translate it to another language selected by the user (e.g., English → Spanish or Hindi → English) Speak back (text-to-speech) the translated text on the same device Is this possible to record via phone mic and play the transcribe voice into headphone's audio?

Hi, I try to record audio on the iPhone with the AVAudioRecorder and Xcode 26.0.1. Maybe the problem is that I can not record audio with the simulator. But there's a menu for audio. In the plist I added 'Privacy - Microphone Usage Description' and I ask for permission before recording. if await AVAudioApplication.requestRecordPermission() { print("permission granted") recordPermission = true } else { print("permission denied") } Permission is granted. let settings: [String : Any] = [ AVFormatIDKey: kAudioFormatMPEG4AAC, AVSampleRateKey: 12000, AVNumberOfChannelsKey: 1, AVEncoderAudioQualityKey: AVAudioQuality.high.rawValue ] recorder = try AVAudioRecorder(url: filename, settings: settings) let prepared = recorder.prepareToRecord() print("prepared started: \(prepared)") let started = recorder.record() print("recording started: \(started)") started is always false and I tried many settings. Error messages AddInstanceForFactory: No factory registered for id <CFUUID 0x600000211480> F8BB1C28-BAE8-11D6-9C31-00039315CD46 AudioConverter.cpp:1052 Failed to create a new in process converter -> from 0 ch, 12000 Hz, .... (0x00000000) 0 bits/channel, 0 bytes/packet, 0 frames/packet, 0 bytes/frame to 1 ch, 12000 Hz, aac (0x00000000) 0 bits/channel, 0 bytes/packet, 1024 frames/packet, 0 bytes/frame, with status -50 AudioQueueObject.cpp:1892 BuildConverter: AudioConverterNew returned -50 from: 0 ch, 12000 Hz, .... (0x00000000) 0 bits/channel, 0 bytes/packet, 0 frames/packet, 0 bytes/frame to: 1 ch, 12000 Hz, aac (0x00000000) 0 bits/channel, 0 bytes/packet, 1024 frames/packet, 0 bytes/frame prepared started: true AudioQueueObject.cpp:7581 ConvertInput: aq@0x10381be00: AudioConverterFillComplexBuffer returned -50, packetCount 5 recording started: false All examples I find are the same, but apparently there must be something different.

Hi everyone, I’m trying to use AVAssetResourceLoaderDelegate to handle a live radio stream (e.g. Icecast/HTTP stream). My goal is to have access to the last 30 seconds of audio data during playback, so I can analyze it for specific audio patterns in near-real-time. I’ve implemented a custom resource loader that works fine for podcasts and static files, where the file size and content length are known. However, for infinite live streams, my current implementation stops receiving new loading requests after the first one is served. As a result, the playback either stalls or fails to continue. Has anyone successfully used AVAssetResourceLoaderDelegate with a continuous radio stream? Or maybe you can suggest betterapproach for buffering and analyzing live audio? Any tips, examples, or advice would be appreciated. Thanks!

{ "aps": { "content-available": 1 }, "audio_file_name": "ding.caf", "audio_url": "https://example.com/audio.mp3" } When the app is in the background or killed, it receives a remote APNs push. The data format is roughly as shown above. How can I play the MP3 audio file at the specified "audio_url"? The user does not need to interact with the device when receiving the APNs. How can I play the audio file immediately after receiving it?

Hello! We stumbled upon a problem with our karaoke app where user on iPhone 16e/iOS 18.5 has problem with mic capture, other users cannot hear him. The mic capture is working fine on 17.5, 16.8. Maybe there is something else we need when configuring AVAudioSession for iOS 18.5? Currently it's set up like this: override func viewDidLoad() { super.viewDidLoad() UIApplication.shared.isIdleTimerDisabled = true mRoomId = appDelegate.getRoomId() let audioSession = AVAudioSession.sharedInstance() try! audioSession.setCategory(.playAndRecord, mode: .voiceChat, options: [.defaultToSpeaker]) try! audioSession.setPreferredSampleRate(48000) try! audioSession.setActive(true, options: []) }

I'm using a 4 channel USB Audio interface, with 4 microphones, and want to process them through 4 independent effect chains. However the output from AVAudioInputNode is a single 4 channel bus. How can I split this into 4 mono busses? The following code splits the input into 4 copies, and routes them through the effects, but each bus contains all four channels. How can I remap the channels to remove the unwanted channels from the bus? I tried using channelMap on the mixer node but that had no effect. I'm currently using this code primarily on iOS but it should be portable between iOS and MacOS. It would be possible to do this through a Matrix Mixer Node, but that seems completely overkill, for such a basic operation. I'm already using a Matrix Mixer to combine the inputs, and it's not well supported in AVAudioEngine. AVAudioInputNode *inputNode=[engine inputNode]; [inputNode setVoiceProcessingEnabled:NO error:nil]; NSMutableArray *micDestinations=[NSMutableArray arrayWithCapacity:trackCount]; for(i=0;i<trackCount;i++) { fixMicFormat[i]=[AVAudioMixerNode new]; [engine attachNode:fixMicFormat[i]]; // And create reverb/compressor and eq the same way... [engine connect:reverb[i] to:matrixMixerNode fromBus:0 toBus:i format:nil]; [engine connect:eq[i] to:reverb[i] fromBus:0 toBus:0 format:nil]; [engine connect:compressor[i] to:eq[i] fromBus:0 toBus:0 format:nil]; [engine connect:fixMicFormat[i] to:compressor[i] fromBus:0 toBus:0 format:nil]; [micDestinations addObject:[[AVAudioConnectionPoint alloc] initWithNode:fixMicFormat[i] bus:0] ]; } AVAudioFormat *inputFormat = [inputNode outputFormatForBus: 1]; [engine connect:inputNode toConnectionPoints:micDestinations fromBus:1 format:inputFormat];

Hi, I'm still stuck getting a basic record-with-playthrouh pipeline to work. Has anyone a sample of setting up a AVAudioEngine pipeline for recording with playthrough? Plkaythrough works with AVPlayerNode as input but not with any microphone input. The docs mention the "enabled state" of the outputNode of the engine without explaining the concept, i.e. how to enable an output. When the engine renders to and from an audio device, the AVAudioSession category and the availability of hardware determines whether an app performs output. Check the output node’s output format (specifically, the hardware format) for a nonzero sample rate and channel count to see if output is in an enabled state. Well, in my setup the output is NOT enabled, and any attempt to switch (e.g. audioEngine.outputNode.auAudioUnit.setDeviceID(deviceID) )/ attach a dedicated device / ... results in exceptions / errors

We require assistance in resolving a critical audio design conflict within our Push-to-Talk (PTT) application. Our current volume amplification strategy—which relies on applying a GAIN factor to PCM samples in conjunction with setting the AVAudioSession category to Playback—is working successfully when PTT is used independently. However, upon integrating and reporting the same PTT call through the CallKit framework, this amplification effect is lost. The CallKit integration appears to be forcing a different, non-amplifying audio session category or configuration, negatively impacting the user's perceived call volume. We need guidance on how to maintain the AVAudioSessionCategoryPlayback setting, or an equivalent high-volume configuration, while operating under the control of CallKit.

My app uses the AVFoundation to pronounce some words. Running the app from Xcode, either to a simulator or device, I frequently get this crash at start-up: AXSpeech (13): EXC_BAD_ACCESS (code=EXC_I386_GPFLT). It seems to occur randomly, maybe 20%-30% of the time I launch the app. When it does not crash, using audio works as expected. When launched from the device, it never crashes (so far, at least). Here's the code that outputs speech: Declared at the top level of the View struct: @State var synth = AVSpeechSynthesizer() In the View, as part of a Button's action closure: let utterance = AVSpeechUtterance(string: answer) utterance.voice = AVSpeechSynthesisVoice(language: "en_US") synth.speak(utterance) Any idea on how to stop this? It's annoying having to launch the app multiple times to test on a simulator or device.

New to iOS development and I've been trying to make heads or tails of the documentation. I know there is a difference between the data fields returned from songs from the user library and from the category, but whenever I search on the apple site I can't find a list of each. For example, Im trying to get the releaseDate of a song in my library, but it seems I'll have to cross-query either the catalog entry for the using song.catalogID or the song.irsc but when I try to use them I can't find a cross reference between the two. I'm totally turned around. Also trying to determine if a song in my library has been favorited or not? isFavorited (or something similar) doesn't seem to be a thing. Using this code and trying to find a way to display a solid star if the song has been favorited or an empty one if it's not. Seems like a basic request but I can't find anything on how to do it. I've searched docs, googled, tried. Does apple want us to query the user's Favorited Songs playlist or something? How do I know which playlist that is? I know isFavorited isn't a thing, just using it here so you can see what my intension is: HStack(spacing: 10) { Image(systemName: song.isFavorited ? "star.fill" : "star") .foregroundColor(song.isFavorited ? .yellow : .gray) Image(systemName: "magnifyingglass") }

Hello, Has anyone else experienced variations in the accuracy of the playbackTime value? After a few seconds of playback, the reported time adjusts by a fraction of a second, making it difficult to calculate the actual playbackTime of the audio. This can be recreated by playing a song in MusicKit, recording the start time of the audio, playing for at least 10-20 seconds, and then comparing the playbackTime value to one calculated using the start time of the audio. In my experience this jump occurs after about 10 seconds of playback. Any help would be appreciated. Thanks!

On Apple TV 4K 3rd generation, with tvOS 26 beta 2, when two HomePod 2 are paired to the device, music and movie sources with Dolby Atmos can only be listened to in stereo. dolby atmos not supported

After upgrading to watchOS 26, users report that when playing music on Apple Watch, if a fitness reminder is received, the music automatically pauses and users need to manually tap the play button to resume music playback. This phenomenon occurs with multiple music and podcast apps. This issue did not exist before the upgrade. We would like to know if this is an Apple bug or if there are any special development configurations needed?"

Hello everyone, I’m new to Swift development and have been working on an audio module that plays a specific sound at regular intervals - similar to a workout timer that signals switching exercises every few minutes. Following AVFoundation documentation, I’m configuring my audio session like this: let session = AVAudioSession.sharedInstance() try session.setCategory( .playback, mode: .default, options: [.interruptSpokenAudioAndMixWithOthers, .duckOthers] ) self.engine.attach(self.player) self.engine.connect(self.player, to: self.engine.outputNode, format: self.audioFormat) try? session.setActive(true) When it’s time to play cues, I schedule playback on a DispatchQueue: // scheduleAudio uses DispatchQueue self.scheduleAudio(at: interval.start) { do { try audio.engine.start() audio.node.play() for sample in interval.samples { audio.node.scheduleBuffer(sample.buffer, at: AVAudioTime(hostTime: sample.hostTime)) } } catch { print("Audio activation failed: \(error)") } } This works perfectly in the foreground. But once the app goes into the background, the scheduled callback runs, yet the audio engine fails to start, resulting in an error with code 561015905. Interestingly, if the app is already playing audio before going to the background, the scheduled sounds continue to play as expected. I have added the required background audio mode to my Info plist file by including the key UIBackgroundModes with the value audio. Is there anything else I should configure? What is the best practice to play periodic audio when the app runs in the background? How do apps like turn-by-turn navigation handle continuous audio playback in the background? Any advice or pointers would be greatly appreciated!

Hi, I'm working on a project that uses the AVSpeechSynthesizer and AVSpeechUtterance. I discovered by chance that the AVSpeechSynthesizer automatically completes some words instead of just outputting what it's supposed to. These are abbreviations for days of the week or months, but not all of them. I don't want either of them automatically completed, but only the specified text. The completion transcends languages. I have written a short example program for demonstration purposes. import SwiftUI import AVFoundation import Foundation let synthesizer: AVSpeechSynthesizer = AVSpeechSynthesizer() struct ContentView: View { var body: some View { VStack { Button { utter("mon") } label: { Text("mon") } .buttonStyle(.borderedProminent) Button { utter("tue") } label: { Text("tue") } .buttonStyle(.borderedProminent) Button { utter("thu") } label: { Text("thu") } .buttonStyle(.borderedProminent) Button { utter("feb") } label: { Text("feb") } .buttonStyle(.borderedProminent) Button { utter("feb", lang: "de-DE") } label: { Text("feb DE") } .buttonStyle(.borderedProminent) Button { utter("wed") } label: { Text("wed") } .buttonStyle(.borderedProminent) } .padding() } private func utter(_ text: String, lang: String = "en-US") { let utterance = AVSpeechUtterance(string: text) let voice = AVSpeechSynthesisVoice(language: lang) utterance.voice = voice synthesizer.speak(utterance) } } #Preview { ContentView() } Thank you Christian

Hello, I am wondering if it is possible to have audio from my AirPods be sent to my speech to text service and at the same time have the built in mic audio input be sent to recording a video? I ask because I want my users to be able to say "CAPTURE" and I start recording a video (with audio from the built in mic) and then when the user says "STOP" I stop the recording.

Issue Description I'm implementing a system audio capture feature using AudioHardwareCreateProcessTap and AudioHardwareCreateAggregateDevice. The app successfully creates the tap and aggregate device, but when starting the IO procedure with AudioDeviceStart, it sometimes fails with OSStatus error 1852797029. (The operation couldn’t be completed. (OSStatus error 1852797029.)) The error occurs inconsistently, which makes it particularly difficult to debug and reproduce. Questions Has anyone encountered this intermittent "nope" error code (0x6e6f7065) when working with system audio capture? Are there specific conditions or system states that might trigger this error sporadically? Are there any known workarounds for handling this intermittent failure case? Any insights or guidance would be greatly appreciated. I'm wondering if anyone else has encountered this specific "nope" error code (0x6e6f7065) when working with system audio capture.

Since MacOS 26 Apple Music has inconsitent drops to the Quality of some Tracks indiscrimantly. I don't know if others Expereinced it. It doesn't happen on the Speakers or connected via Bluetooth, but the AUX I/O has it quite often. It is more noticable on Headphones with 48kHz and higher Frequency Bandwidth. Here is the FB18062589