ARSession provides video stream from the wide angle camera. If ARSession uses the ultra wide camera at the same time, ARSession may provide video stream from that camera, otherwise AVCaptureSession with an ultra wide camera should be allowed to launch. It would be very very useful if we can access different cameras while ARSession is running. We'd like to cooperate with you if possible. Steps to reproduce: run an AVCaptureSession and then run an ARSession. The AVCaptureSession stops.

Dear Apple Team, I’m a high school student (vocational upper secondary school) working on my final research project about LiDAR sensors in smartphones, specifically Apple’s iPhone implementation. My current understanding (for context): I understand Apple’s LiDAR uses dToF with SPAD detectors: A VCSEL laser emits pulses, a DOE splits the beam into a dot pattern, and each spot’s return time is measured separately → point cloud generation. My specific questions: How many active projection dots does the LiDAR projector have in the iPhone 15 Pro vs. iPhone 12 Pro? Are the dots static or do they shift/move over time? How many depth measurement points does the system deliver internally (after processing)? What is the ranging accuracy (cm-level precision) of each measurement point? Experimental background: Using an IR night vision camera, I counted approximately 111 dots on the 15 Pro vs. 576 dots on the 12 Pro. Do these match the internal specifications? Photos of my measurements are available if helpful. Contact request: I would be very grateful if you could connect me with an Apple engineer or ARKit specialist who works with LiDAR technology. I would love to ask follow-up questions directly and would be happy to provide my contact details for this purpose. These specifications would be essential for my research paper. Thank you very much in advance! Best regards, Max! Vocational Upper Secondary School Hans-Leipelt-Schule Donauwörth Research Project: “LiDAR Sensor Technology in Smartphones”

Hello All, I'm desperate to found a solution and I need your help please. I've create a simple cube in Vision OS. I can get it by hand (close my hand on it) and move it pretty where I want. But, I would like to throw it (exemple like a basket ball). Not push it, I want to have it in hand and throw it away of me with a velocity and direction = my hand move (and finger opened to release it). Please put me on the wait to do that. Cheers and thanks Mathis

I am working on a project that requires access to the main camera on the Vision Pro. My main account holder applied for the necessary enterprise entitlement and we were approved and received the Enterprise.license file by email. I have added the Enterprise.license file to my project, and manually added the com.apple.developer.arkit.main-camera-access.allow entitlement to the entitlement file and set it to true since it was not available in the list when I tried to use the + Capability button in the Signing & Capabilites tab. I am getting an error: Provisioning profile "iOS Team Provisioning Profile: " doesn't include the com.apple.developer.arkit.main-camera-access.allow entitlement. I have checked the provisioning profile settings online, and there is no manual option for adding the main camera access entitlement, and it does not seem to be getting the approval from the license.

We're developing a VisionOS application, where we would like to do product recognition (like food items). We have enterprise entitlements and therefore also main camera access for VisionOS. We send this live camera frames to a trained CoreML model where we will receive 2D coordinates from the model detection prediction. Now, we would like to create a 3D anchor on the detected items so it can be visible for user. The 3D anchor is going to be the class name of the detected item. How do we transform this 2D coordinate from the model prediction to a 3D anchor?

I use ARKit to build an app, scan rooms to collect the spatial data of objects and re-construct the 3D scene. the problem is I found the depth map values captured in ARFrame significantly deviate from the real distances, even nonlinearly, for the distances below 1.5m, values are basically correct, but beyond 1.5m, they are smaller than real values. for example read 1.9m from the generated depthmap.tiff, but real distance is 3 meters. below is my code of generating tiff file to record depth map data: Generated TIFF file (captured from ARKit): as shown above, the maximum distance is around 1.9m, but real distance to that wall is more than 3 meters, and also you can see, the depth map picture captured in ARKit is quite blurry, particularly at far distance (> 2.0m), almost smeared out. Generated TIFF file (captured from AVFoundation): In comparison, the depth map captured from traditional AVFoundation and with the same hardware device is much clear, the values seem not in meter unit though.

Hello, I was looking back into downloading the Tracking geographic locations in AR sample app from https://developer.apple.com/documentation/arkit/tracking-geographic-locations-in-ar Unfortunately the Download links to the .zip of the DisplayingAPointCloudUsingSceneDepth sample project. The exact same issue occurs when trying to download the sample code from https://developer.apple.com/documentation/ARKit/creating-a-fog-effect-using-scene-depth Wondering if those links are deliberately broken because of possible deprecations. Thanks to any Apple Engineer willing to look into that.

Hi folks, I’m new to Vision Pro stack, still trying to learn all the nuances. Here is a problem I can’t seem to find an answer. I placed entity A( a small .02 radius sphere) inside entity B( size:.1 box). Both entities have HoverEffectComponent, and both inputcomponent is set to .direct. Entity A is NOT a child of Entity B. When I direct touch Entity B, I noticed that Entity A’s hover effect is fired as well. This only happens if Entity A‘s position is inside Entity B. The gesture that is only targeted at Entity A doesn’t work either. I double checked Entity A collider which sits inside entity B collider, my direct touch shouldn’t have trigger its hove effect. Having one collider inside another seems to produce unpredictable behavior? Thanks in advance 🙏🙏🙏 Context: I’m trying to create an invisible bound around Entity A, so when my hand approaches the bound to grab Entity A, a nice spotlight hover effect would fire first on the bound before hand reaching entity A.

Still don't understand why no one is clarifying about this Apple Video https://developer.apple.com/videos/play/wwdc2023/10111 At the end of this video, there's an incomplete tutorial about connecting a USDZ with mesh and Skeleton structure to the hand tracking system. No example project is linked, and no one is giving the community any clarification. Please can you help us to understand how to proceed?

I am a newby of spatial computing and I am using ARKit and RealityKit to develop a visionPro app. I want to accomplish such a goal: If the user's hand touchs an object(an entity in RealityView) on the table, it will post a Window. But I do not know how to handle the event "the user's hand touchs the object". Should I use hand tracking feature to do some computing by myself? Or is there some api to use directly? Thank you!

I am developing an ARKit based application that requires plane detection of the tabletop at which the user is seated. Early testing was with an iPhone 8 and iPhone 8+. With those devices, ARKit rapidly detected the plane of the tabletop when it was only 8 to 10 inches away. Using iPhone 15 with the same code, it seems to require me to move the phone more like 15 to 16 inches away before detecting the plane of the table. This is an awkward motion for a user seated at a table. To validate that it was not necessarily a feature of my code, I determined that the same behavior results with Apple's sample AR Interaction application. Has anyone else experienced this, and if so, have suggestions to improve the situation?

I am developing an visionos app. I load a .usdz file as a Reality Entity(such as a cabbage). And I want such an effect: When I turn on a desk lamp in real world near the Entity, the surface of the Entity will correctly respond to the light in the real world. I want an effect like this: https://www.reddit.com/r/virtualreality/comments/1as01mm/shiny_disco_ball_reflecting_my_room/ I look up the api such as ImageBasedLightComponent andVirtualEnvironmentProbeComponent in RealityKit、EnvironmentLightEstimationProvider in ARKit，but I do not know how to code. Besides, it will be better if the shadow will also respond to the light correctly.

As I understand it there are two ways I can track a hand, or a joint, in RealityKit: either, create an AnchorEntity, for example AnchorEntity(.hand(.left, location: .palm)) or, set up an ARSession with a HandTrackingProvider ( a lot more code which I haven't repeated here). Assuming this is correct, when would I want to use one over the other?

We applied for the visionOS enterprise permission license, which can help us improve object tracking capabilities on Vision Pro. However, we are unsure how to use it in Unity, specifically how to implement object tracking in Unity and increase the tracking speed.

Hello, I am developing a visionOS application and am interested in obtaining detailed data of users’ hands through ARKit, including but not limited to Transform and rotation angle. I have reviewed Happy Beem, but it appears to only introduce the method of identifying the user’s specific gestures. Could you please advise on how to obtain the Transform and rotation angle of the user’s hand? Thank you.

I want adding grounding shadow on my Entity in RealityView on visionPro. However it seems that the shadow can only appear on another Entity. So I using plane detection in ARKit and add a transparent plane on it to render shadow. let planeEntity = ModelEntity(mesh: .generatePlane(width: anchor.geometry.extent.width, height: anchor.geometry.extent.height), materials: [material]) planeEntity.components.set(OpacityComponent(opacity: 0.0)) But sometimes there will be a border around my Entityon the plane. I do not know why it will happen, and I want remove the border.

When I get close to an Entity in RealityKit wearing VisionPro. The Entity will become transparent so I can distinguish it is rendering by VisionPro instead of an object in reality world. How can I make it not transparent when I get close to the Entity?

Hi there, I'm trying to merge the mesh anchor into a single mesh, but couldn't find any resources on this. Here is the code where I make the mesh from each mesh anchor, and assigned it to a model component with a shader graph material. func run(_ sceneRec: SceneReconstructionProvider) async { for await update in sceneRec.anchorUpdates { switch update.event { case .added, .updated: // Get or create entity for this anchor let anchorEntity = anchors[update.anchor.id] ?? { let entity = ModelEntity() root?.addChild(entity) anchors[update.anchor.id] = entity return entity }() // Remove any existing children for child in anchorEntity.children { child.removeFromParent() } // Generate the mesh from the anchor guard let mesh = try? await MeshResource(from: update.anchor) else { return } guard let shape = try? await ShapeResource.generateStaticMesh(from: update.anchor) else { continue } print("Mesh added, vertices: \(update.anchor.geometry.vertices.count), bounds: \(mesh.bounds)") // Get the material to use var material: RealityKit.Material if isMaterialLoaded, let loadedMaterial = self.shaderMaterial { material = loadedMaterial } else { // Use a temporary material until the shader loads var tempMaterial = UnlitMaterial() tempMaterial.color = .init(tint: .purple.withAlphaComponent(0.5)) material = tempMaterial } await MainActor.run { anchorEntity.components.set(ModelComponent(mesh: mesh, materials: [material])) anchorEntity.setTransformMatrix(update.anchor.originFromAnchorTransform, relativeTo: nil) // Add collision component with static flag - required for spatial interactions anchorEntity.components.set(CollisionComponent( shapes: [shape], isStatic: true, filter: .default )) // Make entity interactive - enables spatial taps, drags, etc. anchorEntity.components.set(InputTargetComponent()) let shadowComponent = GroundingShadowComponent( castsShadow: true, receivesShadow: true ) anchorEntity.components.set(shadowComponent) } I then use a spatial tap gesture to set the position parameter in the shader graph material that creates a nice gradient from the tap position on the mesh to the rest of the mesh. SpatialTapGesture() .targetedToAnyEntity() .onEnded { value in let tappedEntity = value.entity // Check if the tapped entity is a child of tracking.meshAnchors if isChildOfMeshAnchors(entity: tappedEntity) { // Get local position (in the entity's coordinate space) let localPosition = value.location3D // Convert to world position (scene coordinate space) let worldPosition = value.convert(localPosition, from: .local, to: .scene) print("Tapped mesh anchor at local position: \(localPosition)") print("Tapped mesh anchor at world position: \(worldPosition)") // Update the material parameter with the tap position updateMaterialTapPosition(entity: tappedEntity, position: worldPosition) } else { print("Tapped entity is not a mesh anchor") } } } My issue is that because there are several mesh anchors, the gradient often gets cut off by the edge of the mesh generated from the mesh anchor as suppose to a nice continuous gradient across the entire scene reconstructed mesh I couldn't find any documentations on how to merge mesh from mesh anchors, any tips would be helpful! Thank you!

In ARKit for visionOS, I can track the user's head with a HeadAnchor, but it will not give the location. However, I can get the device's transform by calling queryDeviceAnchor(atTimestamp: CACurrentMediaTime()) on a WorldTrackingProvider. Why the difference? - if I know the device's transform, I effectively know the head's transform.

I am using Entity of RealityKit to display virtual content, however I find that sometimes the real object in front of the virtual content can not occulude the virtual content. For example, I place an Entity in a room, but when I walk into another room, I can still see the Entity through the wall. I wonder how should I fix the problem. Thank you!