In WWDC25 video 284: Build a UIKit app with the new design, there is mention of a cornerConfiguration property on UIVisualEffectView. But this properly isn't documented and Xcode 26 isn't aware of any such property. I'm trying to replicate the results of that video in the section titled Custom Elements starting at the 19:15 point. There is a lot of missing details and typos in the code associated with that video. My attempts with UIGlassEffect and UIViewEffectView do not result in any capsule shapes. I just get rectangles with no rounded corners at all. As an experiment, I am trying to recreate the capsule with the layers/location buttons in the iOS 26 version of the Maps app. I put the following code in a view controller's viewDidLoad method let imgCfgLayer = UIImage.SymbolConfiguration(hierarchicalColor: .systemGray) let imgLayer = UIImage(systemName: "square.2.layers.3d.fill", withConfiguration: imgCfgLayer) var cfgLayer = UIButton.Configuration.plain() cfgLayer.image = imgLayer let btnLayer = UIButton(configuration: cfgLayer, primaryAction: UIAction(handler: { _ in print("layer") })) var cfgLoc = UIButton.Configuration.plain() let imgLoc = UIImage(systemName: "location") cfgLoc.image = imgLoc let btnLoc = UIButton(configuration: cfgLoc, primaryAction: UIAction(handler: { _ in print("location") })) let bgEffect = UIGlassEffect() bgEffect.isInteractive = true let bg = UIVisualEffectView(effect: bgEffect) bg.contentView.addSubview(btnLayer) bg.contentView.addSubview(btnLoc) view.addSubview(bg) btnLayer.translatesAutoresizingMaskIntoConstraints = false btnLoc.translatesAutoresizingMaskIntoConstraints = false bg.translatesAutoresizingMaskIntoConstraints = false NSLayoutConstraint.activate([ btnLayer.leadingAnchor.constraint(equalTo: bg.contentView.leadingAnchor), btnLayer.trailingAnchor.constraint(equalTo: bg.contentView.trailingAnchor), btnLayer.topAnchor.constraint(equalTo: bg.contentView.topAnchor), btnLoc.centerXAnchor.constraint(equalTo: bg.contentView.centerXAnchor), btnLoc.topAnchor.constraint(equalTo: btnLayer.bottomAnchor, constant: 15), btnLoc.bottomAnchor.constraint(equalTo: bg.contentView.bottomAnchor), bg.centerXAnchor.constraint(equalTo: view.safeAreaLayoutGuide.centerXAnchor), bg.topAnchor.constraint(equalTo: view.safeAreaLayoutGuide.topAnchor, constant: 40), ]) The result is pretty close other than the complete lack of capsule shape. What changes would be needed to get the capsule shape? Is this even the proper approach?

Making the call as: UIApplication.shared.open(websiteURL) doesn't open the browser and gives the following in the console: BUG IN CLIENT OF UIKIT: The caller of UIApplication.openURL(:) needs to migrate to the non-deprecated UIApplication.open(:options:completionHandler:). Force returning false (NO). However, making the call as: UIApplication.shared.open(websiteURL) { _ in } opens the browser and there is nothing in the cosole. Does someone understand why is this or if it's Apple's iOS 18 bug? In the iOS & iPadOS 18 RC Release Notes | Apple Developer Documentation there is a section around resolving this or something similar, unsure.

Is anyone else getting new warning about menu items with submenus when running on Tahoe? I'm getting big performance problems using my menu as well as seeing these messages and I'm wondering if there's a connection. My app is faceless with a NSStatusItem with an NSMenu. Specifically it's my own subclass of NSMenu where I have a lot of code to manage the menu's dynamic behavior. This code is directly in the menu subclass instead of in a controller because the app I forked had it this way, a little wacky but I don't see it being a problem. A nib defines the contents of the menu, and it's instantiated manually with code like: var nibObjects: NSArray? = [] guard let nib = NSNib(nibNamed: "AppMenu", bundle: nil) else { ... } guard nib.instantiate(withOwner: owner, topLevelObjects: &nibObjects) else { ... } guard let menu = nibObjects?.compactMap({ $0 as? Self }).first else { ... } Within that nib.instantiate call I see a warning logged that seems new to Tahoe, before the menu's awakeFromNib is called, that says (edited): Internal inconsistency in menus - menu <NSMenu: 0x6000034e5340> believes it has <My_StatusItem_App.AppMenu: 0x7f9570c1a440> as a supermenu, but the supermenu does not seem to have any item with that submenu My_StatusItem_App.AppMenu: 0x7f9570c1a440 is my menu belonging to the NSStatusItem, NSMenu: 0x6000034e5340 is the submenu of one of its menu items. At a breakpoint in the NSMenu subclass's awakeFromNib I print self and see clear evidence of the warning's incorrectness. Below is a snippet of the console including the full warning, only edited for clarity and brevity. It shows on line 32 menu item with placeholder title "prototype batch item" that indeed has that submenu. Internal inconsistency in menus - menu <NSMenu: 0x6000034e5340> Title: Supermenu: 0x7f9570c1a440 (My StatusItem App), autoenable: YES Previous menu: 0x0 (None) Next menu: 0x0 (None) Items: ( "<NSMenuItem: 0x6000010e4fa0 Do The Thing Again, ke mask='<none>'>", "<NSMenuItem: 0x6000010e5040 Customize\U2026, ke mask='<none>'>", "<NSMenuItem: 0x6000010e50e0, ke mask='<none>'>" ) believes it has <My_StatusItem_App.AppMenu: 0x7f9570c1a440> Title: My StatusItem App Supermenu: 0x0 (None), autoenable: YES Previous menu: 0x0 (None) Next menu: 0x0 (None) Items: ( ) as a supermenu, but the supermenu does not seem to have any item with that submenu (lldb) po self <My_StatusItem_App.AppMenu: 0x7f9570c1a440> Title: My StatusItem App Supermenu: 0x0 (None), autoenable: YES Previous menu: 0x0 (None) Next menu: 0x0 (None) Items: ( "<NSMenuItem: 0x6000010fd7c0 About My StatusItem App\U2026, ke mask='<none>', action: showAbout:, action image: info.circle>", "<NSMenuItem: 0x6000010fd860 Show Onboarding Window\U2026, ke mask='Shift', action: showIntro:>", "<NSMenuItem: 0x6000010fd900 Update Available\U2026, ke mask='<none>', action: installUpdate:, standard image: icloud.and.arrow.down, hidden>", "<NSMenuItem: 0x6000010e46e0, ke mask='<none>'>", "<NSMenuItem: 0x6000010e4780 Start The Thing, ke mask='<none>', action: startTheThing:>", "<NSMenuItem: 0x6000010e4dc0 \U2318-\U232b key detector item, ke mask='<none>', view: <My_StatusItem_App.KeyDetectorView: 0x7f9570c1a010>>", "<NSMenuItem: 0x6000010e4e60, ke mask='<none>'>", "<NSMenuItem: 0x6000010e4f00 saved batches heading item, ke mask='<none>', view: <NSView: 0x7f9570b4be10>, hidden>", "<My_StatusItem_App.BatchMenuItem: 0x6000016e02c0 prototype batch item, ke mask='<none>', action: replaySavedBatch:, submenu: 0x6000034e5340 ()>", "<NSMenuItem: 0x6000010f7d40, ke mask='<none>'>", "<My_StatusItem_App.ClipMenuItem: 0x7f956ef14fd0 prototype copy clip item, ke mask='<none>', action: copyClip:>", "<NSMenuItem: 0x6000010fa620 Settings\U2026, ke='Command-,', action: showSettings:>", "<NSMenuItem: 0x6000010fa6c0, ke mask='<none>'>", "<NSMenuItem: 0x6000010fa760 Quit My StatusItem App, ke='Command-Q', action: quit:>" ) Is this seemingly incorrect inconsistency message harmless? Am I only grasping at straws to think it has some connection to the performance issues with this menu?

I'm being faced with an issue when using SwiftUI's WebView on iOS 26. In many websites, the top/bottom content is unaccessible due to being under the app's toolbars. It feels like the WebView doesn't really understand the safe areas where it's being shown, because the content should start right below the navigation bar, and only when the user scrolls down, the content should move under the bar (but it's always reachable if the users scroll back up). Here's a demo of the issue: Here's a 'fix' by ensuring that the content of the WebView never leaves its bounds. But as you can see, it feels out of place on iOS 26 (would be fine on previous OS versions if you had a fully opaque toolbar): Code: struct ContentView: View { var body: some View { NavigationStack { WebView(url: URL(string: "https://apple.com")).toolbar { ToolbarItem(placement: .primaryAction) { Button("Top content covered, unaccessible.") {} } } } } } Does anyone know if there's a way to fix it using some sort of view modifier combination or it's just broken as-is?

Since iOS 18.3, icons are no longer generated correctly with QLThumbnailGenerator. No error is returned either. But this error message now appears in the console: Error returned from iconservicesagent image request: <ISTypeIcon: 0x3010f91a0>,Type: com.adobe.pdf - <ISImageDescriptor: 0x302f188c0> - (36.00, 36.00)@3x v:1 l:5 a:0:0:0:0 t:() b:0 s:2 ps:0 digest: B19540FD-0449-3E89-AC50-38F92F9760FE error: Error Domain=NSOSStatusErrorDomain Code=-609 "Client is disallowed from making such an icon request" UserInfo={NSLocalizedDescription=Client is disallowed from making such an icon request} Does anyone know this error? Is there a workaround? Are there new permissions to consider? Here is the code how icons are generated: let request = QLThumbnailGenerator.Request(fileAt: url, size: size, scale: scale, representationTypes: self.thumbnailType) request.iconMode = true let generator = QLThumbnailGenerator.shared generator.generateRepresentations(for: request) { [weak self] thumbnail, _, error in }

I'm trying to apply a tinted glass effect to toolbar buttons in iOS 26, similar to what was shown in the WWDC25 videos, but none of the approaches I've tried produce the translucent tinted glass effect. My code structure: .toolbar { ToolbarItem(placement: .navigationBarTrailing) { TrailingToolbarContent( selectedTab: $selectedTab, showingAddBeneficiary: $showingAddBeneficiary ) } } private struct TrailingToolbarContent: View { @Binding var selectedTab: Int @Binding var showingAddBeneficiary: Bool @EnvironmentObject private var settingsViewModel: SettingsViewModel var body: some View { switch selectedTab { case 1: if #available(iOS 26.0, *) { Button(action: { showingAddBeneficiary = true }) { Image(systemName: "plus") } // What I've tried: // .tint(Color("accentPrimary")) // Only changes icon color // .glassEffect(.regular.tint(Color("accentPrimary"))) // No effect // .buttonStyle(.glass).tint(Color("accentPrimary")) // No tint, but orange background // .buttonStyle(.borderedProminent).tint(Color("accentPrimary")) // Works but seems opaque, not glass } // ... other cases } } } What's the correct way to achieve tinted glass effects on toolbar buttons?

We have been having problems with our app clip not working when sharing through iMessage. The app and app clip are published and work correctly when scanning a QR code that points to the URL: https://www.coderus.com/locations?loc=1 however if this same URL is shared through the iMessage app, a link to the website displays and not the app clip card. We have confirmed that: AASA file is available and has the type application/json Both devices are above iOS 14 Both devices are in each other's contacts The website has the meta tag for the smart app clip banner The website has a meta tag for the og:image Launch experiences have been configured on AppStoreConnect - as said before, the QR codes work correctly The link leads to a 404 page, I wasn't sure if there needs to be an actual page that the link points to as app clips seem to work fine without when scanning the QR code through the camera app.

Hello, im getting popping / crackling sounds from my Macbook Pro (M4 2024) speakers. This happens when you do many certain tasks like click buttons or toggling switches when xcode has a simulator open and any background audio is playing, like spotify. The speakers go crazy especially when starting the simulator in xcode with music in background. Ive tried: Using blackhole, and changing audio output in the simulator app Deleting both .plist files form preferences file. "coreaudiod" trick in terminal restarting many times different xcode versions and simulators and swift files Nothing has worked. Any help?

All of these issues appear when the search controller is set on the view controller's navigationItem and the search controller's searchBar has its scopeButtonTitles set. So far the following issues are affecting my app on iOS/iPadOS 26 as of beta 7: When the scopeBarActivation of UISearchController is set to .onSearchActivation, the preferredSearchBarPlacement of the navigationItem is set to .integratedButton, and the searchBarPlacementAllowsToolbarIntegration is set to false (forcing the search icon to appear in the nav bar), on both iPhones and iPads, the scope buttons never appear. They don't appear when the search is activated. They don't appear when any text is entered into the search bar. FB19771313 I attempted to work around that issue by setting the scopeBarActivation to .manual. I then show the scope bar in the didPresentSearchController delegate method and hide the scope bar in the willDismissSearchController. On an iPhone this works though the display is a bit clunky. On an iPad, the scope bar does appear via the code in didPresentSearchController, but when any scope bar button is tapped, the search controller is dismissed. This happens when the app is horizontally regular. When the app on the iPad is horizontally compact, the buttons work but the search bar's text is not correctly aligned within the search bar. Quite the mess really. I still need to post a bug report for this issue. But if issue 1 above is fixed then I don't need this workaround. When the scopeBarActivation of UISearchController is set to .onSearchActivation, the preferredSearchBarPlacement of the navigationItem is set to .stacked, and the hidesSearchBarWhenScrolling property of the navigationItem is set to false (always show the search bar), and this is all used in a UITableViewController, then upon initial display of the view controller on an iPhone or iPad, you are unable to tap on the first row of the table view except on the very bottom of the row. The currently hidden scope bar is stealing the touches. If you activate and then cancel the search (making the scope bar appear and then disappear) then you are able to tap on the first row as expected. The initially hidden scope bar also bleeds through the first row of the table. It's faint but you can tell it's not quite right. Again, this is resolved by activating and then canceling the search once. FB17888632 When the scopeBarActivation of UISearchController is set to .onSearchActivation, the preferredSearchBarPlacement of the navigationItem is set to integrated or .integratedButton, and the toolbar is shown, then on iPhones (where the search bar/icon appears in the toolbar) the scope buttons appear (at the top of the screen) the first time the search is activated. But if you cancel the search and then activate it again, the search bar never appears a second (or later) time. On an iPad the search bar/icon appears in the nav bar and you end up with the same issue as #1 above. FB17890125 Issues 3 and 4 were reported against beta 1 and still haven't been fixed. But if issue 1 is resolved on iPhone, iPad, and Mac (via Mac Catalyst), then I personally won't be affected by issues 2, 3, or 4 any more (but of course all 4 issues need to be fixed). And by resolved, I mean that the scope bar appears and disappears when it is supposed to each and every time the search is activated and cancelled (not just the first time). The scope bar doesn't interfere with touch events upon initial display of the view controller. And there are no visual glitches no matter what the horizontal size class is on an iPad. I really hope the UIKit team can get these resolved before iOS/iPadOS 26 GM.

Using the iOS 26 beta simulator, I am experiencing a crash using the QLPreviewController. This is easily reproduced using a small sample app and a sample excel file in the bundle. It does work in prior Xcode 16.4 and simulators (18.5). I didn't find any mention of this in Xcode 26 or iOS 26 release notes but I could have missed something. I don't have a spare device to update to iOS 26 and try on a real device so it may just be a simulator issue? Any feedback would be helpful. Thanks. Error: QuickLook/QLHostRemoteViewModel.swift:37: Fatal error: No extensions could be found matching '_AppExtensionQuery(extensionPointIdentifier: "com.apple.quicklook.UIExtensionPoint", predicate: nil, hostAuditToken: nil, extensionPoint: nil, allowsDuplicates: true)' Sample view controller... import UIKit import QuickLook class ViewController: UIViewController, QLPreviewControllerDataSource { var excelFileURL: URL! override func viewDidLoad() { super.viewDidLoad() // Load the Excel file (example: from bundle) if let url = Bundle.main.url(forResource: "file_example_XLSX_100", withExtension: "xlsx") { excelFileURL = url presentPreviewController() } } func presentPreviewController() { let previewController = QLPreviewController() previewController.dataSource = self present(previewController, animated: true, completion: nil) } // MARK: - QLPreviewControllerDataSource func numberOfPreviewItems(in controller: QLPreviewController) -> Int { return 1 } func previewController(_ controller: QLPreviewController, previewItemAt index: Int) -> QLPreviewItem { return excelFileURL as QLPreviewItem } }

Hey, The new "soft" scroll edge effect is really cool! But it seems to only appear when you add toolbar items. Is there a way to add it for "custom" views as well, that I place in a safe area inset? For example, the messages app in iOS 26 does this. There's a text field as a safe area inset as well as a soft scroll edge effect. Thanks!

Hello. I have an 12 year old app that still has some objective-c code in it. I have a place where i have a flip animation between 2 view controllers that looks like this: [UIView transitionFromView:origView toView:newViewController.view duration:0.5 options:UIViewAnimationOptionTransitionFlipFromRight completion:nil]; It has looked like this since 2012 at least. In our production release, it works prior to 26.1, but in 26.1 and 26.2, the flip is off-center and looks weird. it's like both edges flip the same way. It's a little bit hard to explain. If seen at least 2 other app store apps that i have installed behave this way too, from 26.1 and onwards. Anyone else seen this? Is there anything that can be done about it? Thankful for thoughts.

Prior to iOS 26, it was possible to design an inputAccessoryView(Controller) that would integrate seamlessly with the system keyboard, by which I mean appearing as a natural extension of the system keyboard. For example, using CYRKeyboardButton https://github.com/tmcintos/CYRKeyboardButton. To date, I have successfully used this to provide an enhanced numeric key row within my apps, which is a distinguishing feature of these apps. It took a lot of engineering and testing effort to perfect this design. However, with iOS 26 the design is completely broken due to the system keyboard UI change, which makes it impossible to display an inputAccessoryView seamlessly along the top of the system keyboard (see attached screenshots). In my opinion, it is just plain reckless for Apple to make these kinds of trivial UI changes, which break existing app designs without adding any significant value to the user experience. iOS ≤ 18.x: iOS 26 beta:

In iOS 26, the Slider control no longer respects the step parameter. For example, import SwiftUI struct ContentView: View { @State private var sliderValue: CGFloat = 16 var body: some View { Slider( value: $sliderValue, in: 0...100, step: 5, onEditingChanged: { editing in print(sliderValue) } ) } } In iOS 18, this prints values like 5, 35, 60, 95, etc. In iOS 26.0 (release version), this prints floats that are not rounded to the nearest 5, and the slider does not snap to values ending in 5. Feedback report number: FB20320542

I opened a feedback ticket (FB16508762) but maybe someone in the community already found a workaround while the feedback reaches the maintainers. When I put a Button inside a ScrollView, the tap animation stops working reliably and works only when the user taps and holds the button for a short time. The reasons, I believe is related to the fact that isPressed of configuration does not change and the default button styles use it to animate the tap. import SwiftUI struct DebuggingButtonStyle: ButtonStyle { func makeBody(configuration: Configuration) -> some View { configuration.label .onChange(of: configuration.isPressed, { oldValue, newValue in print("Is pressed: \(oldValue) -> \(newValue)") }) } } struct ContentView: View { var body: some View { VStack { Text("Buttons inside scroll view respond to taps as expected, however isPessed value of the configuration do not change unless the user press and hold it. Try to press the promiment button quickly or use the debug button and observe the console log.") ScrollView { VStack { Button("Button Inside ScrollView") { print("Button tapped") } .buttonStyle(.borderedProminent) Button("Button Inside ScrollView (printing isPressed)") { print("Button tapped") } .buttonStyle(DebuggingButtonStyle()) } } .border(FillShapeStyle(), width: 2) Spacer() Text("For reference, here is a button outside of a ScrollView. Tap the promiment button to observe how the button is expected to animate in respnse to a press.") VStack { Button("Button Outside ScrollView") { print("Button tapped") } .buttonStyle(.borderedProminent) Button("Button Outside ScrollView (printing isPressed)") { print("Button tapped") } .buttonStyle(DebuggingButtonStyle()) } } .padding() } }

My app uses the SwiftUI Map control to display annotations. When annotations contain buttons AND the map has an .onTapGesture modifier, annotation button taps aren’t always recognized. Given the following ContentView, run it on an iOS device or simulator. Tap the buttons. Since iOS 18.0, some of the buttons won't respond to tap. I've also tried using the onTapGesture instead of a button, and that shows the same issue. This was not a problem under iOS 17.x: it has only shown up for my users since updating to iOS 18. Additionally, this issue does not occur when running on either macOS 15.0 or visionOS 2.0 when running in "designed for iPad" mode. Note that there was previously a tap issue on VisionOS 1.x (designed for iPad), where no tap gestures were received by annotations. I'm curious if this issue could be related. I have filed a report in Feedback Assistant (FB15273909). struct ContentView: View { private let center = CLLocationCoordinate2D(latitude: 37.77925, longitude: -122.41924) @State private var label: String = "tap a button" @State private var locations: [Location] = [] var body: some View { Map { ForEach(locations) { location in Annotation(location.name, coordinate: location.coordinate) { Button(location.name) { print("\(location.name) tapped") label = "\(location.name) tapped" } .buttonStyle(.borderedProminent) } .annotationTitles(.hidden) } } .onTapGesture { point in print("Map tapped") label = "map tapped" } .safeAreaInset(edge: .top) { Text(label) .padding() .background(.thinMaterial) .clipShape(.rect(cornerRadius: 10)) } .navigationTitle("Test Page") .navigationBarTitleDisplayMode(.inline) .task { for index in 1...16 { locations.append(Location(name: "location \(index)", coordinate: CLLocationCoordinate2D(latitude: center.latitude + Double.random(in: -0.02...0.02), longitude: center.longitude + Double.random(in: -0.02...0.02)))) } } } private struct Location: Identifiable { let id: UUID = UUID() let name: String let coordinate: CLLocationCoordinate2D } } #Preview { ContentView() }

Hi, I'm seeing an issue in iOS 26 beta related to UINavigationBar rendering in landscape. When a background color is set for the navigation bar and the device is rotated to landscape, an unexpected gap appears above the navigation bar. This also happens in the official sample project provided in Apple’s documentation: https://developer.apple.com/documentation/uikit/customizing-your-app-s-navigation-bar Is this a bug in the beta, or is there a workaround to avoid this behavior? Thanks in advance!

We have encountered a problem on iOS 26. When switching to dark mode, the color of all subviews (font color, background color, etc.) of the Sidebar (Primary View) of UISplitViewController will not change. For example, if it is set to the color of UIColor.label, it will always be black and will not be white in dark mode. On Xcode, just create a UISplitViewController in Storyboard without changing any settings, and run it directly to see the following: The title of the Navigation Bar defaults to the label color, and it is still black after switching to dark mode. There is no such problem in the Secondary View or other places. This problem has occurred since iOS 26 beta 3, and iOS 26 beta 4 is now the same. But beta 1 and beta 2 have no problem. I'm not sure if this is a bug, or if there is something that needs to be changed to adapt to iOS 26?

When I dismiss a view presented with .navigationTransition(.zoom), the source view gets a weird background (black or white depending on the appearance) for a couple of seconds, and then it disappears. Here’s a simple code example. import SwiftUI struct NavigationTransition: View { @Namespace private var namespace @State private var isSecondViewPresented = false var body: some View { NavigationStack { ZStack { DetailView(namespace: namespace) .onTapGesture { isSecondViewPresented = true } } .fullScreenCover(isPresented: $isSecondViewPresented) { SecondView() .navigationTransition(.zoom(sourceID: "world", in: namespace)) } } } } struct DetailView: View { var namespace: Namespace.ID var body: some View { ZStack { Color.blue Text("Hello World!") .foregroundStyle(.white) .matchedTransitionSource(id: "world", in: namespace) } .ignoresSafeArea() } } struct SecondView: View { var body: some View { ZStack { Color.green Image(systemName: "globe") .foregroundStyle(Color.red) } .ignoresSafeArea() } } #Preview { NavigationTransition() }

Summary As presented in the SwiftUI WWDC video, the new tabViewBottomAccessory should allow for unique contents for .inline. This is what was presented as being used for the Apple Music miniplayer. However, the functionality seems to be either missing or unintuitive. As seen in the photos attached, not only does .inline functionality not seem to do anything, but the inline accessory also has misaligned elements that cannot be fixed by conditionally modifying the contents. Build Target iOS 26.0 Details This problem recurs on physical devices, simulators, and Xcode previews. Here is a view I've constructed for use as a tabViewBottomAccessory: struct FitnessToolbarAccessory: View { @Environment(\.tabViewBottomAccessoryPlacement) var placement var body: some View { if (placement == .inline) { Text("hello") } else { HStack { HStack { Image(systemName: "dumbbell.fill") VStack(alignment: .leading) { Text("Active Workout") Text("Push Day - Chest") .font(.system(size: 13)) } Spacer() Image(systemName: "pause.fill") } .padding() } } } } Here is the result, working as expected in expanded mode: And here is the result in inline mode after minimizing the tabViewBottomAccessory: The content of this inline accessory is clearly incorrect, as it was specified to contain a Text view containing "hello". Additionally, the contents seem to have some incorrect alignment. This occurs regardless of the contents of the accessory, even plain text.