My application targets iOS 15+. Attempting to build and run it on my iPhone SE (orphaned at iOS 15.6) results in "Failed to prepare the device for development." I'm building with Xcode 15.2. What is the expected procedure here?

I need to duck the audio coming from ApplicationMusicPlayer while playing a local file using AVAudioPlayer. I've tried using the duckOthers option as follows, but it doesn't work: let appAudioSession = AVAudioSession.sharedInstance() do { try appAudioSession.setCategory(.playAndRecord, mode: .default, options: .duckOthers) Maybe this is because there's one session for the entire app, and ApplicationMusicPlayer is using it? This is a fairly critical problem for my application, since Music content is always much louder than locally recorded content. Any insight appreciated.

I'm attempting to record from a device's microphone (under iOS) using AVAudioRecorder. The examples are all quite simple, and I'm following the same method. But I'm getting error messages on attempts to record, and the resulting M4A file (after several seconds of recording) is only 552 bytes long and won't load. Here's the recorder usage: func startRecording() { let settings = [ AVFormatIDKey: Int(kAudioFormatMPEG4AAC), AVSampleRateKey: 22050, AVNumberOfChannelsKey: 1, AVEncoderAudioQualityKey: AVAudioQuality.high.rawValue ] do { recorder = try AVAudioRecorder(url: tempFileURL(), settings: settings) recorder?.delegate = self recorder!.record() recording = true } catch { recording = false recordingFinished(success: false) } } The immediate sign of trouble appears to be the following, in the console. Note the 0 bits per channel and irrelevant 8K sample rate: AudioQueueObject.cpp:1580 BuildConverter: AudioConverterNew returned -50 from: 0 ch, 8000 Hz, .... (0x00000000) 0 bits/channel, 0 bytes/packet, 0 frames/packet, 0 bytes/frame to: 1 ch, 8000 Hz, Int16 A subsequent attempt to load the file into AVAudioPlayer results in: MP4_BoxParser.cpp:1089 DataSource read failed MP4AudioFile.cpp:4365 MP4Parser_PacketProvider->GetASBD() failed AudioFileObject.cpp:105 OpenFromDataSource failed AudioFileObject.cpp:80 Open failed But that's not surprising given that it's only 500+ bytes and we had the earlier error. Anybody have an idea here? Every example on the Web shows essentially this exact method. I've also tried constructing the recorder with let audioFormat = AVAudioFormat.init(standardFormatWithSampleRate: 44100, channels: 1) if audioFormat == nil { print("Audio format failed.") } else { do { recorder = try AVAudioRecorder(url: tempFileURL(), format: audioFormat!) ... with mostly the same result. In that case the instantiation error message was the following, which at least mentions the requested sample rate: AudioQueueObject.cpp:1580 BuildConverter: AudioConverterNew returned -50 from: 0 ch, 44100 Hz, .... (0x00000000) 0 bits/channel, 0 bytes/packet, 0 frames/packet, 0 bytes/frame to: 1 ch, 44100 Hz, Int32

I suddenly noticed that changes I made in code had no effect on the app when I rebuilt it and ran it on my M1 Mac as a "made for iPad" target. The debugger will even stop on new lines and seem to execute them, but they do nothing. If I clean the build folder and re-run, the same line executes as expected. This wastes an incredible amount of time until you discover what's happening. Now I have to remember to clean build folder every time I build and run. The application's structure is very simple, with no included libraries or third-party dependencies. Anybody else seeing this? Xcode 15.3 under Sonoma (14.4.1).

I don't know what triggered this in a previously-running application I'm developing: When I have the build target set to "My Mac (designed for iPad)," I now must delete all the app's build materials under DerivedData to get the app to build and run exactly once. Cleaning isn't enough; I have to delete everything. On second launch, it will crash without even getting to the instantiation of the application class. None of my code executes. Also: If I then set my iPhone as the build target, the app will build and run repeatedly. If I then return to "My Mac (designed for iPad)," the app will again launch once and then crash on every subsequent launch. The crash is the same every time: dyld[3875]: Symbol not found: _OBJC_CLASS_$_AVPlayerView Referenced from: <D566512D-CAB4-3EA6-9B87-DBD15C6E71B3> /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/Library/Debugger/libViewDebuggerSupport.dylib Expected in: <4C34313C-03AD-32EB-8722-8A77C64AB959> /System/iOSSupport/System/Library/Frameworks/AVKit.framework/Versions/A/AVKit Interestingly, I haven't found any similar online reports that mention this symbol. Has anyone seen this behavior before, where the crash only happens after the first run... and gets reset when you toggle the target type?

Under iOS 18.0.1, I can't do any development that uses HTTPS, because I can't authorize my generated certificates on my phone. This was not a problem in the past. Normally you AirDrop a root certificate authority to your phone, install the "profile" for it, and then trust it in Settings / General / About / Certificate Trust Authority. Then you can connect to another server on your network that's using the accompanying certificates. But after sucessfully installing two profiles on my phone, neither shows up in Certificate Trust Authority. Anybody else seeing this? This problem, in combo with this one (which prevents running on my Mac as an iPad app) has completely halted my project. I've found reports of this problem that blamed an empty "common name" field in the certs, but that field is populated in both of these.

I'm making a custom control, specifically a checkbox next to a "label." I want the label parameter, like many in Apple's built-in controls, to take a view-building closure. But I can't figure out the correct syntax. I looked at the declaration of Apple's NavigationLink control for clues: public struct NavigationLink<Label, Destination> : View where Label : View, Destination : View { /// Creates a navigation link that presents the destination view. /// - Parameters: /// - destination: A view for the navigation link to present. /// - label: A view builder to produce a label describing the `destination` /// to present. public init(@ViewBuilder destination: () -> Destination, @ViewBuilder label: () -> Label) But when I mimic this, the compiler complains about the body() function: struct CheckboxItem<Label> : View where Label : View { let stateCheck: () -> Bool let label: () -> any View let boxSize: CGFloat init(withStateCheck: @escaping () -> Bool, boxSize: CGFloat, @ViewBuilder label: @escaping () -> Label) { stateCheck = withStateCheck self.label = label self.boxSize = boxSize } var body: some View { HStack { <-- ERROR: "Type 'any View' cannot conform to 'View'" Image(systemName: stateCheck() ? "checkmark.square" : "square") .resizable() .aspectRatio(contentMode: .fit) .frame(width: boxSize, height: boxSize) .foregroundColor(AppStyle.labelColor) .opacity(0.75) label() } } } Also, note that I had to put @escaping before my label parameter, but that's not seen in Apple's. Any ideas?

Like many applications, mine involves navigation where the user starts a process on one screen and then progresses through several more steps to reach a conclusion. When he confirms that choice, I need to dismiss the entire stack. In my case, he's browsing contacts, selecting one, and then selecting a communication method from those offered by the contact. This still appears to be a PITA in SwiftUI. NavigationPath is supposed to provide a way to programmatically control a stack of views. Well... I can't find a single example of how to use it for this, except with absurdly shallow (as in a single level) of child views that all take the same datatype. Nowhere do I see how to use the path as users proceed through your view hierarchy with NavigationLinks. I have not seen any example of how elements get added to the path or how they are related to each added view. Nor can I find an example of popping views off the stack by removing related elements from the path. I created a class that encloses a NavigationPath: @Observable class NavPathController { var path: NavigationPath init() { path = NavigationPath() } func popOne() { path.removeLast() } func popAll() { path.removeLast(path.count) } } In my root view, I pass a binding to this controller's NavigationPath when creating the NavigationStack: @State private var viewStack = NavPathController() var body: some View { NavigationStack(path: $viewStack.path) { VStack() { NavigationLink(destination: UserFindingView(viewPathController: viewStack), label: { Text("Pick a recipient") }) } } And likewise each view passes the same view-path controller object to each child view that's invoked with a NavigationLink (instead of using an environment variable, because I find those hokey). But in the end, the path is empty; not surprisingly, clearing it does not pop the views. So how is one supposed to make this work?

Is there any way to stop Xcode from randomly re-using a tab when you click on a file in the project treeview? I never, never, NEVER want the file in the current tab replaced. If the clicked-on file is not already open in a tab, I want a new one. Every time. But in Xcode, you sometimes get a new tab, and sometimes don't. I can't find any pattern to this absurd behavior. Even double-clicking doesn't produce a new tab, even though the Navigation settings say, "Double-click: Opens tab in focused editor." WTH is this thing doing, and how do we stop it? This is Xcode 16.4.