A few days ago I uploaded a build to Testflight successfully. Just now I made absolutely no changes whatsoever other than to increment the build number. This latest build doesn't appear in Testflight. Tell me this can't be anything other than a bug with Testflight, if a build from a few days was good enough to appear, then how come with no changes it no longer is.

While attempting to upload my app to TestFlight (which has already been uploaded numerous times, including just a few days ago with the same code base) there is this error "TMS-90338: Non-public API usage - The app references non-public selectors in : _isKeyDown, _modifiedInput, _modifierFlags....." Nothing new there, that's been happening for months for myself and countless others and has been reported numerous times, i.e. https://developer.apple.com/forums/thread/127678?answerId=715975022#715975022 https://developer.apple.com/forums/thread/714450 But now there's a difference - in the past the builds always appeared in Testflight after getting this warning, so it wasn't an issue. But now that's changed, the build is no longer appearing in Testflight, so it suddenly is a very big issue.

I want to programmatically add a contact, preferably within its own group, such that it remains only on the (iPhone) device local copy of contacts and doesn't get synched elsewhere. However if I programmatically create a group then the group itself appears in iCloud, so presumably contacts within it will to. What sort of arrangement of containers/groups/contacts etc. should I create to achieve this?

I've got a notification service extension which uses quite a lot of memory when it runs. Its using UIGraphicsImageRenderer:image() to create an image based on the push payload, and that that is a very memory hungry function. When the extension receives a push it uses less than the 25MB memory limit for extensions and its successful and runs to completion. However the next push that gets receives crashes due to memory not being freed (it doesn't matter if several minutes elapses between pushes). After its crashed its successful once more (the action of it crashing must obviously be freeing up the memory, so after a crash there's enough memory to run again, but then the next push after that will crash and so on and so on). I've run the extension interactively in Xcode's debugger to observe this behavior, but it also happens when running independently of Xcode (and thus lifetimes of things aren't being kept alive by the Xcode debugger). As my extension has no control over the creation/destruction lifecycle of UNNotificationServiceExtension, is there anything that can be done to force the OS/UNNotificationServiceExtension to fully unload and release all its resources?

If the code below is run it causes an exception 'NSInvalidArgumentException', reason: '-[__NSCFType set]: unrecognized selector sent to instance 0x283130be0' However, the exception can be removed by reducing the width value from 100.0 in positionRect, for example setting it to something like 50.0 removes the exception. But why is this? With a width value of 100.0 specified for positionRect, that's well short of the width of imageSize. And even if there is some size issue, why is there an unrecognized selector exception? let imageSize = CGSize(width: 400, height: 100) let testRenderer = UIGraphicsImageRenderer(size: imageSize) let testImage = testRenderer.image { context in context.cgContext.setFillColor(UIColor.black.cgColor) context.fill(CGRect(origin: .zero, size: imageSize)) let paragraphStyle = NSMutableParagraphStyle() paragraphStyle.alignment = .left let attributes: [NSAttributedString.Key: Any] = [ .font: UIFont.systemFont(ofSize: 8.0), .paragraphStyle: paragraphStyle, .foregroundColor: UIColor.white.cgColor ] let attributedString = NSAttributedString(string: "This is some text", attributes: attributes) let positionRect = CGRect(x: 10, y: 10, width: 100.0, height: 8.0) attributedString.draw(with: positionRect, options: .usesLineFragmentOrigin, context: nil) }

There's about 20 internal testers on our Testflight account, but a couple of them just never ever receive the invites/redemption codes so its impossible to get them set set up to be able to test the app. They are added to the Internal Testing App Store Connect Users group, and I've also tried creating a new group and adding them to that as well as and instead of the App Store Connect Users group. These groups are added as testers of builds, and for the other 20 users their status says "Installed" but for a couple of testers their status always shows as "Invited Resend Invite". The problem is, even if I click on Resend Invite an infinite number of times, these testers never receive anything. Never. Not after waiting an hour, 10 hours, a day, a week, a month. Click on click on click on Resend Invite and it does nothing, they never get anything. No emails are not going into their trash/spam folder. I've tried deleting the testers entirely from the entire developer account, and then when I re-add them back, then in that case they do get an email inviting them to join the developer account, but then they don't subsequently receive a TestFlight invite / code when added to a build. The internal testers are all members of the same organization, so all have the same form of email address which is being used. 20 or 30 or them its ok, but for a couple of testers Testflight just hates them. For one user, we tried everything and spent literally weeks, just was never ever able to get them set up and eventually had to give up. Our IT department had to specially create a new email for them, just to try and get them added to TestFlight. Hey and guess what, the new email worked, while the old one never did. But this isn't a solution, can't ask the IT dept to create new emails, and shouldn't have to. But now the same thing is happening again to another tester. Why does clicking Resend Invite not do anything? How can I force things and get this tester to receive an invite?

I've got a notification service extension with quite a lot going on, and consequently I've been running out of memory. One thing in particular that is using a lot of memory is UIGraphicsImageRenderer which I'm using to construct an image at run time the size of the device's bounds. Running the extension in Xcode and profiling its memory it appears that using autoreleasepool {} doesn't seem to always release memory instantly, so if you do A and then B, and combined they have too much memory usage for the extension to handle, trying to autorelease A doesn't actually always release the memory before B (unlike if the code is running in the main app rather than an extension). A few questions is there any way of programmatically detecting the memory usage / memory limit within the extension? if the extension goes over the 24Mg limit, is there any way of catching that exception and handling it somehow? is there a way of ensuring/forcing autoreleasepool{} to clear memory before proceeding with further code?

I want to programmatically create a contact with an image with the result that when the iPhone receives a call from the number associated with that contact its image will appear on the incoming call screen (occupying the full screen, not the little tiny icon variation). But I'm having a hell of a job trying to figure out what dimensions should be used for the image to add to the contact. If on the iPhone I take a screenshot and add that manually to a contact then make a call, then the call screen more or less displays the entire screenshot almost the same as the actual desktop. The call screen appears to be slightly magnifying the image. So whatever size the screenshot is should be close enough for the contact image. I've got an iPhone 14 pro and its UIScreen.main.bounds is 932 by 430. If I export an iPhone screenshot to a Mac, I can see its image size is 2796 by 1290, which is exactly 3 times the bounds size. So I created an image of size 2796 by 1290 and programmatically added it to a contact (using CNMutableContact.imageData = myUIImage.pngData(). But when a call arrives the image that gets displayed on the call screen is way way way out of whack and alignment. Same too if I add am image of size 932 by 430 (i.e. without the 3 times factor). I've done lots of experiments but I just can't figure out what size image I should add to the contact. Does anybody happen to know? (I exported the contact where I manually added the screenshot image as a .vcf to see what image size they use, but it doesn't export the full image that's actually displayed during a call screen, it just exports a truncation of the full image which is a square of 1200 by 1200.)

There's lots of material on the internet talking about how the VoIP background mode capability was deprecated in iOS 10. And yet its still presented as an option in the latest version of Xcode and it still appears in Apple's documentation https://developer.apple.com/documentation/xcode/configuring-background-execution-modes The documentation states: The app provides Voice over IP services and requires automatic launch after system restart. For more information, see the CallKit framework. It seems apps used to be able to be launched on restart prior to iOS 10, but since then they can't. So is the documentation for this area out of date and wrong? If its been deprecated for so long, why is it still documented and possible to add it to an application?

Whenever one googles for VoIP and iOS there's always a lot of results that appear that tell you about using CallKit. However CallKit on its own is useless, it just provides a GUI/OS integration of VoIP, but not the actual SIP nor VoIP things themselves. There's lots of 3rd party libraries out that, however they all include licensing, or paying a fee, and are tied to the 3rd party's servers. Approximately how much effort is it to develop from scratch in Swift code to enable an app to receive VoIP calls (it doesn't need to make outgoing VoIP calls, and and only audio, not video needs to be supported). Here's what I think would be involved: Send information from the app to a SIP registrar. How difficult is this? Enable VoIP push handling in the app, send the Voip Push token to a server. Handle incoming VoIP push. Implement the VoIP transport, audio handling etc., for incoming VoIP Integrate with the OS I know how to do 2, and for 4 there's loads of tutorials on CallKit. What I'd like to determine is what is involved and a level of effort for implementing 1) and 3) without using a 3rd framework. Anybody done this themselves and has a rough idea?

This video is referenced in several places, for example here references it https://developer.apple.com/documentation/callkit/making_and_receiving_voip_calls_with_callkit and Eskimo has referenced it in his posts. But its gone, there are other WWDC16 session videos but not this one (https://developer.apple.com/videos/wwdc2016) Is it available anywhere else? Also how can this code be run/tested for an incoming call (without using the build in simulator i.e. using a real incoming Voip call)? What tool/app etc. could be used to generate a call to the handset to see the code in action when answering a VoIP call?

0 If a voip push (i.e. a push with a topic of com.company.app.voip as the push topic) is sent to a handset then it is delivered directly to the app via: pushRegistry:(PKPushRegistry *)registry didReceiveIncomingPushWithPayload:(PKPushPayload *)payload forType:(PKPushType)type withCompletionHandler: If the app has a notification service extension, and the push payload contains mutable-content, and if the app is terminated, then the app gets launched in the background and the push still is delivered directly to the app, it does not get delivered to the extension. If the push topic is changed to be just com.company.app (and provided the payload contains the mutable-content flag) then in that case it gets delivered to the extension. However now it's no longer a voip push, it's just a regular push, because the topic no longer contains the .voip suffix. So how can things be configured whereby a voip push gets delivered to a notification service extension? Because that's what the Apple documentation says: Call this method when your notification service extension receives an encrypted VoIP call request. From: https://developer.apple.com/documentation/callkit/cxprovider/3727263-reportnewincomingvoippushpayload How is that possible, how can a notification service extension receive an encrypted VoIP call request like it mentions in the documentation?

CallKit provides the ability to block regular calls via the call extension. And CallKit also provides the ability to integrate VoIP calls with the phone's call screen/user experience etc. However the blocking aspect of CallKit seems to have no bearing on the VoIP aspect. When the app receives a Voip Push it has to call CXProvider.reportNewIncomingCall() and that displays a call screen. If the parameters passed to reportNewIncommingCall() a handle of the .phone with a phone number registered for blocking with CallKit, the call screen still displays. Its not use to call CXProvider.invalidate() immediately because the call screen will still display, though its only displayed for a brief time its still very very obvious and noticeable. Therefore there appears to be no way of "blocking" the call, blocking is in quotes because from the user's perspective you would not expect to see the call screen, but is there is no way of stopping it from appearing, even if that appearance is only brief?

I'm confused by when CXProvider:reportNewIncommingVoIPPushPayload() is intended to be used versus CXProvider:reportNewIncommingCall(). All the iOS tutorials about VoIP push talk about sending a voip push to the app and the app calling CXProvider:reportNewIncommingCall() and then proceeding to deal with the VoIP call. However in this Apple documentation https://developer.apple.com/documentation/callkit/sending_end-to-end_encrypted_voip_calls It talks about sending a regular push, not a voip push, which is intercepted by a notification service extension, and the extension calling CXProvider:reportNewIncommingVoiPPushPayload(). I'm confused - when there's an incoming VoIP call should a voip push be sent to the app and reportNewIncommingCall() called or a regular push sent to the notification extension and reportNewIncommingVoiPPushPayload() called?

I've found literally dozens and dozens of tutorials of how to deal with a voip push, but none of them, not one, make any mention at all of how to set things up prior to that, nor how to test the code they've just written. Sure, you can send a voip push easily enough using a push tool or push script, but that's only part of the picture, none of these tutorials mention anything about actually making a voip test call to accompany the test voip push. Are there any tools, or web portals etc. that can be used to generate a voip call to a handset to set the voip call side of things in addition to the voip push handling? Also, none of the tutorials mention what's needed to be done by the app in addition to implemented code to handle the voip push, specifically I mean how does the server sending the push know which user is associated with the push token. Surely there has to be a step where the app performs some sort of sip registration with a server before it deals with a voip push. None of these so called tutorials show any of that, all these tutorials just show a small portion of a whole, does anybody know of one that actually shows the whole?