Hi, You're here because you've had issues with your implementation of In-App Provisioning Extensions for Apple Pay In-App Provisioning or In-App Verification. To prevent sending sensitive credentials in plain text, create a new report in Feedback Assistant to share the details requested below with the appropriate log profiles installed. Gathering Required Information for Troubleshooting Apple Pay In-App Provisioning or In-App Verification Issues While troubleshooting Apple Pay In-App Provisioning or In-App Verification, it is essential that the issuer is able to collect logs on their device and check those logs for error message. This is also essential when reporting issues to Apple. To gather the required data for your own debugging as well as reporting issues, please perform the following steps on the test device: Install the Apple Pay and Wallet profiles on your iOS or watchOS device. If the issue occurs on Mac, continue to Step 2. Reproduce the issue and make a note of the timestamp when the issue occurred, while optionally capturing screenshots or video. Gather a sysdiagnose on the same iOS or watchOS device, or on macOS. Create a Feedback Assistant report with the following information: The bundle IDs App bundle ID Non-UI app extension bundle ID (if applicable) UI app extension bundle ID (if applicable) The serial number of the device. For iOS and watchOS: Open Settings > General > About > Serial Number (tap and hold to copy). For macOS: Open the Apple () menu > About This Mac > Serial Number. The SEID (Secure Element Identifier) of the device, represented as a HEX encoded string. For iOS and watchOS: Open Settings > General > About > SEID (tap and hold to copy). For macOS: Open the Apple () menu > About This Mac > System Report > NVMExpress > Serial Number. The sysdiagnose gathered after reproducing the issue. The timestamp (including timezone) of when the issue was reproduced. The type of provisioning failure (e.g., error at Terms & Conditions, error when adding a card, etc.) The issuer/network/country of the provisioned card (e.g., Mastercard – US) Last 4 digits of the FPAN Last 4 digits of the DPAN (if available) Was this test initiated from the Issuer App? (e.g., yes or no) The type of environment (e.g., sandbox or production) Screenshots or videos of errors and unexpected behaviors (optional). Important: From the logs gathered above, you should be able to determine the cause of the failure from PassbookUIService, PassKit or PassKitCore, and by filtering for your SEID or bundle ID of your app or app extensions in the Console app. Submitting your feedback Before you submit to Feedback Assistant, please confirm the requested information above is included in your feedback. Failure to provide the requested information will only delay my investigation into the reported issue within your Apple Pay client. After your submission to Feedback Assistant is complete, please respond in your existing Developer Forums post with the Feedback ID. Once received, I can begin my investigation and determine if this issue is caused by an error within your client, a configuration issue within your developer account, or an underlying system bug. Cheers, Paris X Pinkney |  WWDR | DTS Engineer

Hi, To ensure the issue is not caused by an error within your app or web service request, please review the Apple Pay Merchant Integration Guide. Additionally, please review the following technotes on Apple Pay: TN3173: Troubleshooting issues with your Apple Pay merchant identifier configuration TN3174: Diagnosing issues with the Apple Pay payment sheet on your website TN3175: Diagnosing issues with displaying the Apple Pay button on your website TN3176: Troubleshooting Apple Pay payment processing issues TN3206: Updating Apple Pay certificates If the resources above don’t help identify the cause of the error, please provide more information about your app or web services to get started. To prevent sending sensitive credentials in plain text, create a report in Feedback Assistant to share the details requested below. Additionally, if the error is something we need to investigate further, the appropriate engineering teams also have access to the same information and can communicate with you directly within Feedback Assistant for more information, as needed. Please follow the instructions below to submit your report. For issues occurring with your native app or web service, perform the following steps: Install the Apple Pay profile on your iOS or watchOS device. If the issue occurs on Mac, continue to Step 2. Reproduce the issue and make a note of the timestamp when the issue occurred, while optionally capturing screenshots or video. Gather a sysdiagnose on the same iOS or watchOS device, or on macOS. Create a Feedback Assistant report with the following information: The serial number of the device. For iOS and watchOS: Open Settings > General > About > Serial Number (tap and hold to copy). For macOS: Open the Apple () menu > About This Mac > Serial Number. The SEID (Secure Element Identifier) of the device, represented as a HEX encoded string. For iOS and watchOS: open Settings > General > About > SEID (tap and hold to copy). For macOS: Open the Apple () menu > About This Mac > System Report > NVMExpress > Serial Number. The sysdiagnose gathered after reproducing the issue. The timestamp of when the issue was reproduced. Screenshots or videos of errors and unexpected behaviors (optional). Important: From the logs gathered above, you should be able to determine the cause of the failure from PassbookUIService, PassKit or PassKitCore, and by filtering for your SEID or merchant domain in the Safari Web Inspector. See Inspecting Safari on macOS to learn more. Submitting your feedback Before you submit to Feedback Assistant, please confirm the requested information above is included in your feedback. Failure to provide the requested information will only delay my investigation into the reported issue within your Apple Pay website. After your submission to Feedback Assistant is complete, please respond in your existing Developer Forums post with the Feedback ID. Once received, I can begin my investigation and determine if this issue is caused by an error within your web implementation, a configuration issue within your developer account, or an underlying system bug. Cheers, Paris X Pinkney |  WWDR | DTS Engineer

iOS 16 and earlier On iOS 16 and earlier, Apple Pay on the Web required Safari—and all interactions with the Apple Pay API to come from the parent/top level page. In order to facilitate the Apple Pay button in an HTML inline frame (iframe), there will need to be cross frame communication between the child and parent pages. Cross frame communication should be secure and robust, therefore the use of postMessage for this purpose is recommended. The expectation is for all communication with Apple Pay to occur from the parent page, so the iframe must relay all Apple Pay related events to the parent to handle. Some examples: Apple Pay availability: The parent calls applePayCapabilities, then sends the message of the response to the iframe, which then uses the value to toggle the visibility of the Apple Pay button. Apple Pay session: The iframe receives an onclick() event when the Apple Pay button is clicked and sends the message to the parent (providing details about the transaction). The parent create the payment request to obtain the session validation URL, and eventually receive session credentials and invokes completeMerchantValidation() to prevent the payment sheet. After the payment is authorized by the Payment Service Provider (PSP), the parent either: Redirects the parent page to a payment success page; or Sends a message to the iframe to complete the transaction flow itself. iOS 17 and later On IOS 17 and later, the iframe HTML element should include the allow="payment" attribute, which should facilitate the cross frame communications instead of needing a dedicated JavaScript library. This means all of the Apple Pay code/calls can reside in the iframe page—which is typically a hosted page from a Payment Service Provider (PSP), all the parent page—typically a merchant—has to do is add the attribute mentioned above to the iframe element. Important: Regardless of the iOS version, the PSP/merchant always needs to make sure the parent page domain is the one registered in the Developer portal, and used in the request to generate a merchant session via ApplePaySession. Cheers, Paris X Pinkney |  WWDR | DTS Engineer

We are working with two types of wallet passes. Provisioning works successfully for one pass type via wallet extensions, but the same process is not functioning for the other. For the second pass type, we are able to generate the required data for pull provisioning and send it to Apple. Additionally, in-app push provisioning for this pass type completes without issue. We would appreciate guidance on how to further debug and resolve this provisioning problem.

Hi, We're experiencing an issue with verifying our domain for Apple Pay on the web. It's currently stuck in the "Pending" state despite meeting the listed requirements. The domain in question has been verified once successfully but one month later when we renewed the SSL, we were unable to verify the domain again. Please note that the new certificate's CA chain has been changed. A) The "apple-developer-merchantid-domain-association.txt" file is publicly accessible at the following location: /.well-known/apple-developer-merchantid-domain-association.txt B) We've also ensured that the following IP ranges are whitelisted: 17.32.139.128/27 17.32.139.160/27 17.140.126.0/27 17.140.126.32/27 17.179.144.128/27 17.179.144.160/27 17.179.144.192/27 17.179.144.224/27 17.253.0.0/16 17.23.4.96/27 17.132.108.64/26 17.23.24.32/27 17.23.19.0/27 17.157.40.128/27 17.157.44.128/27 17.157.32.0/27 C) Our servers support TLS 1.2 already. D) "ECDHE-RSA-AES128-GCM-SHA256" cipher suite has been used, so we believe all necessary criteria are satisfied. However, when we attempt to verify the domain, we receive the following error message: "Domain verification failed. Review your TLS Certificate configuration to confirm that the certificate is accessible and a supported TLS Cipher Suite is used." Could you please advise why the verification is failing, or let us know if there's anything we might have missed? Best regards, Mehdi

I am currently working on decrypting Apple Pay tokens with Laravel PHP, and I have encountered a few uncertainties regarding the decryption process and the usage of AES-GCM. Could you please clarify the following points: Algorithm Confirmation: Am I using the correct algorithm for decrypting the data key? Specifically, I am utilizing AES-256-GCM with the algorithm ID "id-aes256-GCM" (2.16.840.1.101.3.4.1.46), as specified in the documentation. Is this the recommended algorithm for decrypting the Apple Pay token's data key? Authentication Tag: In the decryption process, it seems that an authentication tag is required, but I am not sure where to obtain it from. Could you confirm how the authentication tag is generated or provided during the encryption process? If the tag is part of the token or is transmitted separately, could you clarify where I can retrieve it in order to proceed with the decryption successfully? IV and Other Parameters: I am using an initialization vector (IV) of 16 null bytes (00000000000000000000000000000000) as specified in the documentation. Could you confirm that this is correct and aligns with the expected parameters for the AES-GCM decryption? Are there any other specific parameters or considerations I should be aware of when implementing the decryption of Apple Pay tokens? GCM vs Other Encryption Modes: Can you confirm that AES-GCM is the preferred and required encryption mode, or is there any flexibility to use other modes (e.g., AES-CBC) without compromising security? Your guidance would be greatly appreciated to ensure I am following the correct decryption procedure for Apple Pay tokens. Thank you in advance for your support.

Hi, We have app in which we take donations from people and send to non-profit organisations. I have read that Apple Pay can be integrated on non profit platforms to take donations, but we are middle man, we are not non profit .. we take donations, cut our platform fees and then sent to donations to non profit orgs. My question is can we integrate Apple Pay in our iOS app to take donations from apple? as we have integrated Apple Pay on the web.

We have an Apple Pay account and have successfully created and verified the payment processing certificate in our Apple Developer account. When initiating an Apple Pay payment, the Apple session is created successfully with the correct data return from api , but it is not accepted with the error: “Payment not completed.” The issue occurs even though the merchant validation step works without errors. Our websites where this is happening are: https://magicdeliver.com/ https://www.pulsarmodular.com/ Could you please help us identify the cause of the issue and guide us on resolving it?

Hello, I am following up on my previous feedback (Feedback ID: FB17175593) regarding the in-app provisioning failure for Apple Pay. In that report, I detailed errors encountered during the card addition process (notably issues related to a missing teamID and cryptographic material errors). Could you please provide an update on the investigation progress? I appreciate your assistance and look forward to your response.

Bank Accounts details are outdated and status is stack on processing with error: "Your banking updates are processing, and you should see the changes in 24 hours. You won't be able to make any additional updates until then." This is now stack for a few years since we activated a previous Apple developer account. we must change banking details as it holds up development of an app with in-app purchases. Finance department has been contacted and they do not answer What shall we do? senior support staff keep referring to finance department and is not helping

Hello! We are using "Apple Pay Web Merchant Registration API" https://developer.apple.com/documentation/applepaywebmerchantregistrationapi Recently we successfully updated the Payment/identity certificates at our main merchant ID And we have a few questions: Do we need make the Domain verification for all of our sub-merchants again after the Certificates update? How we can check the expiration of domain verification of merchants that we integrate trough API endpoint (https://apple-pay-gateway.apple.com/paymentservices/registerMerchant), and do verified domains via API have an expiration date??? How we can understand does the our universal domain verification file (apple-developer-merchantid-domain-association) have expiration too? Thanks in advance!

I'm successfully using Apple subscriptions in my app, but I'm encountering SKErrorCodeDomain error 18 when trying to apply a subscription offer. I want apply offer code first time only for subscription. Below are details of what i set in appstore and what i have tested. Subscription Offer Details Offer Type: For the first month Customer Eligibility: New, Existing, and Expired Subscribers Code Status: Active Offer Code Creation Steps: App Store Connect → App → Subscription → Select Subscription Product → Offer Codes → Add → Add Custom Codes Signature Generation for Promotional Offers I'm following Apple's documentation to generate a signature: https://developer.apple.com/documentation/storekit/generating-a-signature-for-promotional-offers I’ve constructed the payload as instructed: appBundleId + '\u2063' + keyIdentifier + '\u2063' + productIdentifier + '\u2063' + offerIdentifier + '\u2063' + appAccountToken + '\u2063' + nonce + '\u2063' + timestamp Keys and Identifiers keyIdentifier, issuerId, and .p8 file are obtained from: App Store Connect → Users and Access → Integrations → In-App Purchase Test user created under: App Store Connect → Users and Access → Sandbox → Test Accounts Logged in with this account on the iPhone What I’ve Tried Verified all values used in the payload are correct Tried both seconds and milliseconds for the timestamp (as per documentation, it should be in milliseconds) Tried setting appAccountToken to: a valid UUID an empty string not setting it at all Used Apple’s sample code to generate a signature: https://developer.apple.com/documentation/storekit/generating-a-promotional-offer-signature-on-the-server Verified the generated signature locally, and it validated successfully: https://developer.apple.com/documentation/storekit/generating-a-signature-for-promotional-offers#Validate-locally-and-encode-the-signature Apple’s sample code to generate a signature Downloaded from const express = require('express'); const router = express.Router(); const crypto = require('crypto'); const ECKey = require('ec-key'); const secp256k1 = require('secp256k1'); const uuidv4 = require('uuid/v4'); const KeyEncoder = require('key-encoder'); const keyEncoder = new KeyEncoder('secp256k1'); const fs = require('fs'); function getKeyID() { return "KEYIDXXXXX"; } router.post('/offer', function(req, res) { const appBundleID = req.body.appBundleID; const productIdentifier = req.body.productIdentifier; const subscriptionOfferID = req.body.offerID; const applicationUsername = req.body.applicationUsername; const nonce = uuidv4(); const currentDate = new Date(); const timestamp = currentDate.getTime(); const keyID = getKeyID(); const payload = appBundleID + '\u2063' + keyID + '\u2063' + productIdentifier + '\u2063' + subscriptionOfferID + '\u2063' + applicationUsername + '\u2063'+ nonce + '\u2063' + timestamp; // Get the PEM-formatted private key string associated with the Key ID. // const keyString = getKeyStringForID(keyID); // Read the .p8 file const keyString = fs.readFileSync('./SubscriptionKey_47J5826J8W.p8', 'utf8'); // Create an Elliptic Curve Digital Signature Algorithm (ECDSA) object using the private key. const key = new ECKey(keyString, 'pem'); // Set up the cryptographic format used to sign the key with the SHA-256 hashing algorithm. const cryptoSign = key.createSign('SHA256'); // Add the payload string to sign. cryptoSign.update(payload); /* The Node.js crypto library creates a DER-formatted binary value signature, and then base-64 encodes it to create the string that you will use in StoreKit. */ const signature = cryptoSign.sign('base64'); /* Check that the signature passes verification by using the ec-key library. The verification process is similar to creating the signature, except it uses 'createVerify' instead of 'createSign', and after updating it with the payload, it uses `verify` to pass in the signature and encoding, instead of `sign` to get the signature. This step is not required, but it's useful to check when implementing your signature code. This helps debug issues with signing before sending transactions to Apple. If verification succeeds, the next recommended testing step is attempting a purchase in the Sandbox environment. */ const verificationResult = key.createVerify('SHA256').update(payload).verify(signature, 'base64'); console.log("Verification result: " + verificationResult) // Send the response. res.setHeader('Content-Type', 'application/json'); res.json({ 'keyID': keyID, 'nonce': nonce, 'timestamp': timestamp, 'signature': signature }); }); module.exports = router; Postman request and response Request URL: http://192.168.1.141:3004/offer Request JSON: { "appBundleID":"com.app.bundleid", "productIdentifier":"subscription.product.id", "offerID":"OFFERCODE1", "applicationUsername":"01234b43791ea309a1c3003412bcdaaa09d39a615c379cc246f5f479760629a1" } Response JSON: { "keyID": "KEYIDXXXXX", "nonce": "f98f2cda-c7a6-492f-9f92-e24a6122c0c9", "timestamp": 1753510571664, "signature": "MEYCIQCnA8UGWhTiCF+F6S55Zl6hpjnm7SC3aAgvmTBmQDnsAgIhAP6xIeRuREyxxx69Ve/qjnONq7pF1cK8TDn82fyePcqz" } Xcode Code func buy(_ product: SKProduct) { let discountOffer = SKPaymentDiscount( identifier: "OFFERCODE1", keyIdentifier: "KEYIDXXXXX", nonce: UUID(uuidString: "f98f2cda-c7a6-492f-9f92-e24a6122c0c9")!, signature: "MEYCIQCnA8UGWhTiCF+F6S55Zl6hpjnm7SC3aAgvmTBmQDnsAgIhAP6xIeRuREyxxx69Ve/qjnONq7pF1cK8TDn82fyePcqz", timestamp: 1753510571664) let payment = SKMutablePayment(product: product) payment.applicationUsername = "01234b43791ea309a1c3003412bcdaaa09d39a615c379cc246f5f479760629a1" payment.paymentDiscount = discountOffer SKPaymentQueue.default().add(payment) } Issue Even following instructions to the documentation and attempting various combinations, the offer keeps failing with SKErrorCodeDomain error 18. Has anyone else experienced this? Any suggestions as to what may be amiss or how it can be corrected?

Team, We are currently checking out on Apple Pay using ALL and MRU as currencies. We have authorized the payment via Touch ID; however, we are not receiving the onPaymentAuthorized event. Could you please confirm if Apple Pay supports ALL and MRU currencies? We have confirmed that it works with other currencies. Thank you!

Hi, we are trying to verify our domain and we uploaded the file to our domain {DOMAIN}/.well-known/apple-developer-merchantid-domain-association.txt and we can access it. But when we want verify the domain in your platform we can't do it and you see the message "Domain verification failed". How can we verified or if we need change something in our side to verify it? thanks!

Hello, I'm experiencing an irregular issue with Apple Pay merchant domain verification. As you know, Apple requires domain verification every two months to maintain Apple Pay functionality. The problem is that while the verification sometimes happens automatically without any issues, other times it fails to complete, even though the required file "apple-developer-merchantid-domain-association.txt" is correctly available on our server. When automatic verification fails, the Apple Pay service becomes non-functional on our website, forcing us to perform a manual verification to restore the pending service. Is it normal to encounter such inconsistent automatic verification processes? What could be causing these intermittent verification failures, whereas manual verification always succeed? suggesting this might not be related to IP address restrictions described on the Apple documentation. Thank you in advance,

Hello everyone, We're implementing Apple Pay on the web and are already live, processing transactions. However, we've noticed that occasionally the onlinePaymentCryptogram returned in the paymentData contains spaces, causing it to be rejected by acquirers. Has anyone else encountered this issue? Any insights would be greatly appreciated.

Hi , This is regarding the ApplePayRecurringPayment Request and Apple Pay on Web functionality. Does Apple Pay on web providing functionality that collects payments from the stored credit card issuer bank (or) it only provides secured wallet functionality that provides a token which then has to be utilized to send a seperate payment request through a third party payment gateway to collect the payments from the credit card issuer bank. thanks

Hey everyone, hoping someone here has run into this before. I have a fully functional App Clip (com.didyoucatchit.app.Clip) linked to my main app (com.didyoucatchit.app). The Clip builds and runs perfectly, but I’m seeing issues trying to enable Apple Pay for it. When I try to link my Merchant ID under the “On Demand Install Capable” capability in the Apple Developer portal, I get this error: A relationship in the provided entity is not allowed for this request. The relationship 'undefined' can not be included in a 'bundleIdCapabilities' request. Here’s what I have already configured and confirmed: App Clip capabilities in Xcode include: Apple Pay Payment Processing Associated Domains (appclips:app.didyoucatchit.com) Provisioning profile includes: Apple Pay Payment Processing Associated Domains In-App Purchase On-Demand Install Capable Entitlements file for the Clip: <key>com.apple.developer.associated-domains</key> <array> <string>appclips:app.didyoucatchit.com</string> </array> <key>com.apple.developer.in-app-payments</key> <array> <string>merchant.com.didyoucatchit.app</string> </array> <key>com.apple.developer.parent-application-identifiers</key> <array> <string>$(AppIdentifierPrefix)com.didyoucatchit.app</string> </array> Merchant ID (merchant.com.didyoucatchit.app) is active and connected to Stripe Stripe Apple Pay configuration matches the same merchant ID and certificate Both provisioning profiles have been refreshed and downloaded However: The portal still throws the “relationship 'undefined'” error anytime I try to modify the Clip’s capabilities In testing, Apple Pay doesn’t show up as a payment option in the Clip (using Stripe’s Payment Element integration) Questions: Is this a known issue with the Developer portal when linking App Clips to merchant IDs? Is there a specific way to re-establish the parent–child relationship between the main app and the App Clip so the bundleIdCapabilities request includes the proper relationship JSON? Are there any additional configuration steps required when using Stripe for Apple Pay inside an App Clip? System Setup: Xcode: 16.2 (build 16C5032a) macOS: Sequoia 15.3.1 iOS: 18.5 (testing on physical device) Merchant ID: merchant.com.didyoucatchit.app Main App ID: com.didyoucatchit.app App Clip ID: com.didyoucatchit.app.Clip Any help or insight would be hugely appreciated Thanks in advance!

Cybersource production support has clarified issue as below "On the BAD Case, it seems that the Apple Payload did not contain the "onlinePaymentCryptogram" object within the JSON. The Cryptogram is critical and mandatory. Since the merchant cannot really control this, and since CYBS is just decrypting the payload and uses it, we cannot comment as to why it was missing. The merchant would need to reach out to Apple and/or decrypt the payment themselves locally to check if and why this data was not present, for troubleshooting purposes."

We have updated the PNO metadata to include the associatedApplicationIdentifiers for our wallet extensions and the issuer app. While we are able to successfully provision the card to Apple Wallet via pull provisioning, we are unable to retrieve the payment passes that have already been provisioned. How can we address this issue? let passLibrary = PKPassLibrary() let paymentPassLibrary = self.passLibrary.passes(of: .secureElement) paymentPassLibrary is an empty array even though we have passes provisioned.

Recently, we completed a merger with our parent company. We are currently integrated with Apple Pay in accordance with the “Apple Pay Payment Processing on the Web” guidelines. Due to the change in the legal entity, we proceeded with the account migration process as outlined below: Creation of a new Apple Developer account and a new Apple Pay Identifier Removal of the Merchant Domain (dc2-web.happy.co.kr) from the existing Identifier Registration of the Merchant Domain (dc2-web.happy.co.kr) under the new Identifier Using the Merchant Domain registered under the new Identifier and the Apple Pay Merchant Identity Certificate issued from the new Identifier, we attempted to obtain an Apple Pay session by sending requests to the following endpoint: https://apple-pay-gateway.apple.com/paymentservices/startSession However, we are intermittently receiving failure responses with an HTTP 400 status code. With regard to these intermittent failures, we would like to inquire whether there is any propagation delay on Apple’s servers when an Apple Pay Identifier is removed and re-registered under a new account, or if there could be any other possible causes for this behavior. We would appreciate your guidance on this matter.

We are developing a native iOS financial application called Tradu: Stocks, Forex, and CFDs (Apple ID: 6473443264), which embeds a WKWebView to render all user-facing logic. All user interactions—including authentication with MFA—occur inside this WKWebView. To access native functionality, we use postMessage() to communicate between the web and native layers. This approach has worked successfully for biometric authentication, for example. We are currently integrating Apple Pay In-App Provisioning and have a few questions regarding compliance with the documentation provided by our Issuer Host (Modulr). In the document titled Getting Started with Apple Pay: In-App Provisioning, Verification, Security, and Wallet Extensions (Version 4.0, February 2023), all examples are based on a fully native application. We’ve managed to integrate most of the In-App Provisioning flow via postMessage() up to the point of passing encryptedData to the Payment View. Apple Pay button inside WKWebView In Section 7: Frontend Overview, the user initiates the provisioning by tapping a native PKPaymentButton (SwiftUI example). In our case, this button is rendered inside the WKWebView, styled according to the Apple Style Guide. While the document references this approach as a “raw mark text supplement,” is this method acceptable and compliant with Apple’s UX and technical guidelines? MFA requirement before provisioning In Section 4: Security Guidelines, it is stated that the user must have passed MFA at least once before starting the provisioning flow. In our implementation, users must complete MFA on every login (including on recognized devices) before the provisioning UI becomes available. Even though this is not tied specifically to “unrecognized devices,” is our MFA requirement sufficient to satisfy Section 4.2? Summary: Is using a web-rendered Apple Pay button inside WKWebView (instead of a native PKPaymentButton) considered compliant? Is our MFA enforcement model (required on every login) aligned with the security requirements outlined in Section 4.2 of the Apple Pay In-App Provisioning documentation?

Dears, We are developing an apple wallet extension. In the Non-ui extension, in the getPaymentPassEntry overriden function we have to return an object such as: ``PKIssuerProvisioningExtensionPaymentPassEntry(identifier: identifier, title: label, art: getEntryArt(image: uiImage), addRequestConfiguration: requestConfig)!`` What is not clear are the requirements for this "art" parameter. Somewhere in the FAQ it says that the art has to be an image of 1536 x 969 resolution, <4 MB, squared corners, no chip contacts, and so forth) but we set there images of any size and the extension displays them without any problem. Are those requirements (1536 x 969 resolution, and so on) only for the images that are displayed in the wallet only after the card has been added? In this case, are those images coming from the PNO directly and not coming from the function above which is in the wallet extension? Thanks,