Hi, You're here because you've had issues with your implementation of In-App Provisioning Extensions for Apple Pay In-App Provisioning or In-App Verification. To prevent sending sensitive credentials in plain text, create a new report in Feedback Assistant to share the details requested below with the appropriate log profiles installed. Gathering Required Information for Troubleshooting Apple Pay In-App Provisioning or In-App Verification Issues While troubleshooting Apple Pay In-App Provisioning or In-App Verification, it is essential that the issuer is able to collect logs on their device and check those logs for error message. This is also essential when reporting issues to Apple. To gather the required data for your own debugging as well as reporting issues, please perform the following steps on the test device: Install the Apple Pay and Wallet profiles on your iOS or watchOS device. If the issue occurs on Mac, continue to Step 2. Reproduce the issue and make a note of the timestamp when the issue occurred, while optionally capturing screenshots or video. Gather a sysdiagnose on the same iOS or watchOS device, or on macOS. Create a Feedback Assistant report with the following information: The bundle IDs App bundle ID Non-UI app extension bundle ID (if applicable) UI app extension bundle ID (if applicable) The serial number of the device. For iOS and watchOS: Open Settings > General > About > Serial Number (tap and hold to copy). For macOS: Open the Apple () menu > About This Mac > Serial Number. The SEID (Secure Element Identifier) of the device, represented as a HEX encoded string. For iOS and watchOS: Open Settings > General > About > SEID (tap and hold to copy). For macOS: Open the Apple () menu > About This Mac > System Report > NVMExpress > Serial Number. The sysdiagnose gathered after reproducing the issue. The timestamp (including timezone) of when the issue was reproduced. The type of provisioning failure (e.g., error at Terms & Conditions, error when adding a card, etc.) The issuer/network/country of the provisioned card (e.g., Mastercard – US) Last 4 digits of the FPAN Last 4 digits of the DPAN (if available) Was this test initiated from the Issuer App? (e.g., yes or no) The type of environment (e.g., sandbox or production) Screenshots or videos of errors and unexpected behaviors (optional). Important: From the logs gathered above, you should be able to determine the cause of the failure from PassbookUIService, PassKit or PassKitCore, and by filtering for your SEID or bundle ID of your app or app extensions in the Console app. Submitting your feedback Before you submit to Feedback Assistant, please confirm the requested information above is included in your feedback. Failure to provide the requested information will only delay my investigation into the reported issue within your Apple Pay client. After your submission to Feedback Assistant is complete, please respond in your existing Developer Forums post with the Feedback ID. Once received, I can begin my investigation and determine if this issue is caused by an error within your client, a configuration issue within your developer account, or an underlying system bug. Cheers, Paris X Pinkney |  WWDR | DTS Engineer

Hi, To ensure the issue is not caused by an error within your app or web service request, please review the Apple Pay Merchant Integration Guide. Additionally, please review the following technotes on Apple Pay: TN3173: Troubleshooting issues with your Apple Pay merchant identifier configuration TN3174: Diagnosing issues with the Apple Pay payment sheet on your website TN3175: Diagnosing issues with displaying the Apple Pay button on your website TN3176: Troubleshooting Apple Pay payment processing issues TN3206: Updating Apple Pay certificates If the resources above don’t help identify the cause of the error, please provide more information about your app or web services to get started. To prevent sending sensitive credentials in plain text, create a report in Feedback Assistant to share the details requested below. Additionally, if the error is something we need to investigate further, the appropriate engineering teams also have access to the same information and can communicate with you directly within Feedback Assistant for more information, as needed. Please follow the instructions below to submit your report. For issues occurring with your native app or web service, perform the following steps: Install the Apple Pay profile on your iOS or watchOS device. If the issue occurs on Mac, continue to Step 2. Reproduce the issue and make a note of the timestamp when the issue occurred, while optionally capturing screenshots or video. Gather a sysdiagnose on the same iOS or watchOS device, or on macOS. Create a Feedback Assistant report with the following information: The serial number of the device. For iOS and watchOS: Open Settings > General > About > Serial Number (tap and hold to copy). For macOS: Open the Apple () menu > About This Mac > Serial Number. The SEID (Secure Element Identifier) of the device, represented as a HEX encoded string. For iOS and watchOS: open Settings > General > About > SEID (tap and hold to copy). For macOS: Open the Apple () menu > About This Mac > System Report > NVMExpress > Serial Number. The sysdiagnose gathered after reproducing the issue. The timestamp of when the issue was reproduced. Screenshots or videos of errors and unexpected behaviors (optional). Important: From the logs gathered above, you should be able to determine the cause of the failure from PassbookUIService, PassKit or PassKitCore, and by filtering for your SEID or merchant domain in the Safari Web Inspector. See Inspecting Safari on macOS to learn more. Submitting your feedback Before you submit to Feedback Assistant, please confirm the requested information above is included in your feedback. Failure to provide the requested information will only delay my investigation into the reported issue within your Apple Pay website. After your submission to Feedback Assistant is complete, please respond in your existing Developer Forums post with the Feedback ID. Once received, I can begin my investigation and determine if this issue is caused by an error within your web implementation, a configuration issue within your developer account, or an underlying system bug. Cheers, Paris X Pinkney |  WWDR | DTS Engineer

iOS 16 and earlier On iOS 16 and earlier, Apple Pay on the Web required Safari—and all interactions with the Apple Pay API to come from the parent/top level page. In order to facilitate the Apple Pay button in an HTML inline frame (iframe), there will need to be cross frame communication between the child and parent pages. Cross frame communication should be secure and robust, therefore the use of postMessage for this purpose is recommended. The expectation is for all communication with Apple Pay to occur from the parent page, so the iframe must relay all Apple Pay related events to the parent to handle. Some examples: Apple Pay availability: The parent calls applePayCapabilities, then sends the message of the response to the iframe, which then uses the value to toggle the visibility of the Apple Pay button. Apple Pay session: The iframe receives an onclick() event when the Apple Pay button is clicked and sends the message to the parent (providing details about the transaction). The parent create the payment request to obtain the session validation URL, and eventually receive session credentials and invokes completeMerchantValidation() to prevent the payment sheet. After the payment is authorized by the Payment Service Provider (PSP), the parent either: Redirects the parent page to a payment success page; or Sends a message to the iframe to complete the transaction flow itself. iOS 17 and later On IOS 17 and later, the iframe HTML element should include the allow="payment" attribute, which should facilitate the cross frame communications instead of needing a dedicated JavaScript library. This means all of the Apple Pay code/calls can reside in the iframe page—which is typically a hosted page from a Payment Service Provider (PSP), all the parent page—typically a merchant—has to do is add the attribute mentioned above to the iframe element. Important: Regardless of the iOS version, the PSP/merchant always needs to make sure the parent page domain is the one registered in the Developer portal, and used in the request to generate a merchant session via ApplePaySession. Cheers, Paris X Pinkney |  WWDR | DTS Engineer

We had noticed “paymentCredentialsAvailable” is getting returned more from apple pay capabilities for some unexpected devices (our example is windows + chrome). Based off the documentation this should only be returning if this is linked to a wallet account w/ valid payment. From some investigation this appears to have changed from apple pay js v1.3.7 to v1.3.8 (latest). Previously the above windows + chrome example would return “paymentCredentialStatusUnknown” which is what would be expected in this case. Tried running chrome in icognito mode and clearing cookies just in case this check had some linkage to the apple account via QR code usage, but did not appear to affect the returned response. Unsure if this is a bug or a change to the logic, but doesn’t appear to be appropriately reflected in the documentation, also a change like this should not be appearing in a patch version. Has anyone else experienced this?

Hello, We are currently developing an application that uses the Host-based Card Emulation (HCE) entitlement to enable corporate access functionality. With this entitlement, we have successfully established HCE communication and can interact with our access control systems to unlock doors. Our question is related to improving the user experience: We would like this access functionality to work without requiring the app to be in the foreground, as this adds friction for users during entry. Specifically, we would like to know: Is it possible for our app to coexist with Apple Wallet as the default contactless app, so that: Our app handles NFC interactions for corporate access (e.g., opening doors). Apple Wallet remains the default for payments. If that coexistence is not possible, and our app is set as the default contactless app, Will the system still need to launch our app into the foreground to complete a transaction (e.g., to emulate the NFC card)? Or is there a way to trigger HCE responses in the background (e.g., using a background process or service extension)? Any guidance on how to configure the app for optimal background access behavior, while maintaining compatibility with Wallet, would be greatly appreciated. Thank you in advance.

We are writing to report a recurring stability issue with the Apple Pay sandbox environment. We are using the official sandbox test cards provided on the Apple Developer website for our testing: https://developer.apple.com/apple-pay/sandbox-testing/ We are experiencing frequent, intermittent failures when attempting to add these sandbox cards to the Wallet for testing purposes. The issue typically occurs a couple of times per day. When the failure occurs, the card provisioning process fails unexpectedly. The issue is not limited to a single card; we have observed this behavior across all available card networks. In some instances, all cards (Visa, Mastercard, Discover, Amex) fail to provision simultaneously. At other times, the issue appears to be isolated to specific networks while others work correctly. Crucially, the issue appears to be temporary. After some time passes (ranging from minutes to an hour), we are able to add the exact same card successfully without making any changes to our test environment or configuration. We have diligently checked our setup to rule out configuration errors on our end. This includes verifying: The device is set to a supported region. We are signed in with a valid sandbox tester Apple ID. All other prerequisites for sandbox testing are met. The fact that the process works correctly at other times strongly suggests that this is a server-side stability issue within the Apple Pay sandbox environment rather than a persistent misconfiguration on our part. To help with your investigation, we have attached an image that demonstrates a failed attempt to add a card. Could you please investigate the stability of the sandbox card provisioning service? Please let us know if this is a known issue or if there is any further information we can provide. Thank you for your time and assistance.

For Apple Pay testing, I have tried the following: Sign into the Sandbox Account via Developer Settings: Settings > Developer > Sandbox Account Keep your main Apple ID for everything else Add Test Cards to Wallet: Try adding the test card numbers (MasterCard and Visa Debit, as we support only those) Apple provides in their documentation. Unfortunately, none of them are added to the wallet. All the time it gives 'Could Not Add Card'. I tried on devices with iOS 18+. Can anyone advise on this? Thanks

we are currently using the requestAutomaticPassPresentationSuppression API in my app. to prevent the Wallet interface from appearing when an NFC/RF reader is detected during active app usage. Recently, a new transit card supporting Express Mode (T-money Transit Card) was released in Korea, and we are seeing an increasing number of users enabling Express Mode. However, this has introduced an issue where users are unable to use the BLE-based functionality we provide via our widget. Specifically, when the user taps our widget, it triggers a BLE signal broadcast for approximately 10 seconds. In this scenario, when the user brings their iPhone close to our reader, Express Mode is activated before the BLE interaction can be established. This prevents the BLE signal from being successfully received and processed. We would like to ask: Is it possible to suppress Express Mode behavior (similar to requestAutomaticPassPresentationSuppression) even when the app is launched via a widget interaction? Alternatively, is there any way to delay or defer Express Mode activation temporarily when launching from a widget or during BLE communication? We would appreciate any guidance or best practices you can share regarding this scenario. Thank you.

Hello, We are experiencing an issue with Apple Pay integration in our application. We are using WKWebView to handle various payment methods, but we are unable to complete payments via Apple Pay. Upon debugging the WKWebView, we received the following error message: "400 No required SSL certificate was sent" when attempting to process the payment. Currently, we are using a Let's Encrypt SSL certificate. Could you please confirm whether this certificate is suitable for Apple Pay, or if we should be using a different SSL certificate?

Hello, I have recently started exploring the Apple Wallet extension and have a couple of questions I was hoping you could help clarify: Is there any form of communication between the UI extension and the non-UI extension? From my understanding, the UI extension handles the authorization and simply indicates whether the app approves it or not, without passing additional data. However, the non-UI extension is expected to make calls to the issuer app’s backend, which typically require a token obtained through prior authentication services and may even involve an OTP. Is there a recommended way to share this information between extensions within the Apple Wallet Extension framework, or is using App Groups the only option? Additionally, during the provisioning process, is there any possibility of re-invoking the UI extension if further validation is required? Furthermore, according to the documentation, testing is carried out via TestFlight and in production. Is there any way to test these extensions on a physical device directly from Xcode for debugging purposes, or is TestFlight the only available method? Thank you very much in advance for your time and assistance.

To perform the integration, it must be done under the same domain that has been validated. Is it not possible to do it in a local environment? Could that be the reason why I can't display the button or complete the validation with the API?

Hi, I’ve been trying to integrate Apple Pay, but for some reason, the payment button is not showing up. The project is built with Laravel 11 and Vue. I imported the script as follows: <script crossorigin crossorigin src="https://applepay.cdn-apple.com/jsapi/1.latest/apple-pay-sdk.js" ></script> Then I added the following the steps: <style> apple-pay-button {{ --apple-pay-button-width: --apple-pay-button-width: 150px;; --apple-pay-button-height: --apple-pay-button-height: 30px;; --apple-pay-button-border-radius: --apple-pay-button-border-radius: 3px;; --apple-pay-button-padding: --apple-pay-button-padding: 0px 0px;; --apple-pay-button-box-sizing: border-box; } </style> <apple-pay-button buttonstyle="black" type="plain" locale="en-US"></apple-pay-button> I followed all the steps from the official Apple Pay demo: https://applepaydemo.apple.com/ I also configured the Content Security Policy (CSP) to allow all necessary resources. However, when I test my integration, the button doesn’t appear. I’ve checked the console, but there are no errors. At the same time, I have my certificate imported into the Keychain, and I’ve completed the entire process of creating both the certificate and the private key. However, when I try to validate the session using the certificate and key with Apple’s API, I get an error: 400 The SSL certificate error https://apple-pay-gateway-cert.apple.com/paymentservices/

In the docs, I see a button type with label "Pay With [apple logo]. https://developer.apple.com/design/human-interface-guidelines/apple-pay Although I don't see this type as an option here: https://developer.apple.com/documentation/PassKit/PKPaymentButtonType Wondering if I'm looking in the right place and if this button type is still available?

We are developing a native iOS financial application called Tradu: Stocks, Forex, and CFDs (Apple ID: 6473443264), which embeds a WKWebView to render all user-facing logic. All user interactions—including authentication with MFA—occur inside this WKWebView. To access native functionality, we use postMessage() to communicate between the web and native layers. This approach has worked successfully for biometric authentication, for example. We are currently integrating Apple Pay In-App Provisioning and have a few questions regarding compliance with the documentation provided by our Issuer Host (Modulr). In the document titled Getting Started with Apple Pay: In-App Provisioning, Verification, Security, and Wallet Extensions (Version 4.0, February 2023), all examples are based on a fully native application. We’ve managed to integrate most of the In-App Provisioning flow via postMessage() up to the point of passing encryptedData to the Payment View. Apple Pay button inside WKWebView In Section 7: Frontend Overview, the user initiates the provisioning by tapping a native PKPaymentButton (SwiftUI example). In our case, this button is rendered inside the WKWebView, styled according to the Apple Style Guide. While the document references this approach as a “raw mark text supplement,” is this method acceptable and compliant with Apple’s UX and technical guidelines? MFA requirement before provisioning In Section 4: Security Guidelines, it is stated that the user must have passed MFA at least once before starting the provisioning flow. In our implementation, users must complete MFA on every login (including on recognized devices) before the provisioning UI becomes available. Even though this is not tied specifically to “unrecognized devices,” is our MFA requirement sufficient to satisfy Section 4.2? Summary: Is using a web-rendered Apple Pay button inside WKWebView (instead of a native PKPaymentButton) considered compliant? Is our MFA enforcement model (required on every login) aligned with the security requirements outlined in Section 4.2 of the Apple Pay In-App Provisioning documentation?

Hi, I am the developer of this app and I was shared this receipt which strangely does not list my name as the merchant but instead says "The flow network" as you can see below: What is going on?

We plan to set Manual PAN Entry Allowed = N and accept only issuer push provisioning (PKAddPaymentPass). Is there any Apple Pay programme rule that obliges us to keep MANUAL_ENTRY enabled? Will disabling it affect “Participating Issuer” listing?

We have verified our domain but if the file is removed from the deployed site after verification will this impact using ApplePaySession.applePayCapabilities in real time? We use that method from the JS api in our React app to determine whether or not to show the apple pay button. When that function is called in the browser, do the apple servers ping the https://our.domain.com/.well-known/apple-developer-merchantid-domain-association URL at that time? Or do they check for it periodically? The reason for asking is that with our many environments we wonder if we can verify each environment's domain by adding the file once. The file will be wiped out by our CICD process as it goes up the environment stack through our development workflow. Or do we need to maintain that file for each environment and add something to our build process?

Hello, On my website, I have a button to make a payment via Apple Pay. When I click on it, the Touch ID window opens correctly. However, when I place my finger on the Touch ID, I get a payment error. This issue only occurs in production mode. In sandbox mode, everything works perfectly. Here is a log file : log.txt Thank you in advance for your help.

I am trying to play around on the Apple Pay demo page (https://applepaydemo.apple.com) and I am getting the following error response. PaymentRequest AbortError: The operation was aborted. I am using the Payment Request API

Hello! We use Apple's "master account" scheme to register new clients trough API due to the fact that the number of merchant IDs in a developer account cannot exceed 100 records. It's been almost a year since we successfully used the master account ( ex. "merchant.com.xxx") and register clients via Postman. At the moment, the certificates for the master merchant ID start to expire on July 11 which will affect all customers which is under Master ID. We know that when updating certificates at the identifier level(our master id), new universal identity certificate files that we use to send to the merchants (merchant_id.pem, privkey.key) will be generated for authentication on the merchant side, as well as a new keystore. Since many of our clients are integrated with current files and keystores and have live traffic, we would like to know—is it possible to update certificates on the master account without changing the keystores and certificate identities? The impossibility of this will entail a large gap when switching to new certificates. Thanks in advance for your answer.

Hello, We are experiencing a consistent delay when initiating Apple Pay sessions using the https://apple-pay-gateway.apple.com/paymentservices/startSession endpoint. Below is a detailed overview of our setup and the issue. Setup Our web service is hosted in AWS and there is a proxy server between our web service and Apple servers. We are passing the correct domain in the initiativeContext field of the startSession request. The .well-known/apple-developer-merchantid-domain-association file is hosted on a different domain, which is also correctly configured and associated with our merchant ID in the Apple Developer portal. Observed Behavior When the same request is made from a local development environment, Apple responds immediately (under 1 second). When the request is made from our AWS-hosted service, Apple responds with a valid session, but only after a consistent ~15-second delay. The content and response are otherwise identical — only the timing differs. We would appreciate any insights or suggestions from others who have faced similar behavior or from the Apple Pay team. Thank you in advance!

We are experiencing intermittent 403 Forbidden errors during Apple Pay on web merchant validation in our production and sandbox environment. Has anyone else started seeing 403 Forbidden errors recently (since mid-2025)? Why would merchant validation be sometimes successful and sometimes fail with 403? Could this be related to new Apple Pay gateway changes or stricter validation rules? Any additional debug steps or permanent solutions we should try? Thank you.

Hi Support, When the applepay express transit option is used on emv payment cards, like this iPhone - Open “Settings” → “Wallet & Apple Pay” → “Express Transit Card”. And a emv single card has been enabled under Express Transit And on transit reader Apple Enhanced contactless Polling support is provided, ( with VAS not supported, user authentciation not supported) Sometimes ATQB response also comes from the iPhone or iWatch instead of the ATQA response, and then it causes the transit reader to report as collision error in the polling. Sequence of the packets: WUPA WUPB ECP frame WUPA WUPB ATQB WUPA ATQA