Hello, I have a question about a edge case scenario. Before that some info on my project- I have a launchdaemon that carries out some business logic, it also has XPC listener (built using C APIs). Question- Can there be a situation when the daemon is up and running but the XPC listener is down(due to some error or crash)? If yes then do I need to handle it in my code or launchd will handle it? when the daemon is stopped or shut down, how do I stop the XPC listener? After getting listener object from xpc_connection_create_mach_service should I just call xpc_connection_cancel followed by a call to xpc_release? Thanks! K

I'm trying to schedule a background task that will run on an iPhone and I'm looking into creating a task request using BGProcessingTaskRequest and scheduled it using BGTaskScheduler.shared.submit(). Per earliestBeginDate documentation, this property can be used to specify the earliest time a background task will be launched by OS. All clear here. However, the question is: how is the value interpreted with respect to timezone ? Is the specified date in device timezone ? Is GMT ? Is something else ?

Hello everyone! I'm having a problem with background tasks running in the foreground. When a user enters the app, a background task is triggered. I've written some code to check if the app is in the foreground and to prevent the task from running, but it doesn't always work. Sometimes the task runs in the background as expected, but other times it runs in the foreground, as I mentioned earlier. Could it be that I'm doing something wrong? Any suggestions would be appreciated. here is code: class BackgroundTaskService { @Environment(\.scenePhase) var scenePhase static let shared = BackgroundTaskService() private init() {} // MARK: - create task func createCheckTask() { let identifier = TaskIdentifier.check BGTaskScheduler.shared.getPendingTaskRequests { requests in if requests.contains(where: { $0.identifier == identifier.rawValue }) { return } self.createByInterval(identifier: identifier.rawValue, interval: identifier.interval) } } private func createByInterval(identifier: String, interval: TimeInterval) { let request = BGProcessingTaskRequest(identifier: identifier) request.earliestBeginDate = Date(timeIntervalSinceNow: interval) scheduleTask(request: request) } // MARK: submit task private func scheduleTask(request: BGProcessingTaskRequest) { do { try BGTaskScheduler.shared.submit(request) } catch { // some actions with error } } // MARK: background actions func checkTask(task: BGProcessingTask) { let today = Calendar.current.startOfDay(for: Date()) let lastExecutionDate = UserDefaults.standard.object(forKey: "lastCheckExecutionDate") as? Date ?? Date.distantPast let notRunnedToday = !Calendar.current.isDate(today, inSameDayAs: lastExecutionDate) guard notRunnedToday else { task.setTaskCompleted(success: true) createCheckTask() return } if scenePhase == .background { TaskActionStore.shared.getAction(for: task.identifier)?() } task.setTaskCompleted(success: true) UserDefaults.standard.set(today, forKey: "lastCheckExecutionDate") createCheckTask() } } And in AppDelegate: BGTaskScheduler.shared.register(forTaskWithIdentifier: "check", using: nil) { task in guard let task = task as? BGProcessingTask else { return } BackgroundTaskService.shared.checkNodeTask(task: task) } BackgroundTaskService.shared.createCheckTask()

Hello, My app (daemon) time to time need to know list of GUI login sessions. According to the recommendation, I am using getutxent(). https://developer.apple.com/library/archive/qa/qa1133/_index.html However, I have faced with unclear behaviour in case of running "Migration Assistant". It can be re-created without my app. Steps to recreate: login as 'user #1' start "Migration Assistant" quit "Migration Assistant" new login prompt will be opened login as 'user #2' In spite the session of 'user #1' is closed, the command line tool "who", which gathers information from /var/run/utmpx, reports opened sessions of 'user #1'. Is it bug or feature? Thank you in advance!

I'm troubleshooting a crash I do not understand. I have a queue called DataQueue which never has anything dispatched to it - it's the sample buffer delegate of an AVCaptureVideoDataOutput. It can call DispatchQueue.main.sync to do some work on the main thread. It works fine no matter what we test, but has some crashes in the field that I need to fix. Here's it crashing: AppleCameraDataDelegate.dataQueue 0 libsystem_kernel.dylib 0x7bdc __ulock_wait + 8 1 libdispatch.dylib 0x4a80 _dlock_wait + 52 2 libdispatch.dylib 0x486c _dispatch_thread_event_wait_slow$VARIANT$mp + 52 3 libdispatch.dylib 0x113d8 __DISPATCH_WAIT_FOR_QUEUE__ + 332 4 libdispatch.dylib 0x10ff0 _dispatch_sync_f_slow + 140 The main thread isn't doing something I asked it to, but appears to be busy: Thread 0 libsystem_kernel.dylib 0x71a4 __psynch_cvwait + 8 1 libsystem_pthread.dylib 0x7fd8 _pthread_cond_wait$VARIANT$mp + 1232 2 grpc 0x2cb670 gpr_cv_wait + 131 (sync.cc:131) 3 grpc 0x119688 grpc_core::Executor::ThreadMain(void*) + 225 (executor.cc:225) 4 grpc 0x2e023c grpc_core::(anonymous namespace)::ThreadInternalsPosix::ThreadInternalsPosix(char const*, void (*)(void*), void*, bool*, grpc_core::Thread::Options const&)::'lambda'(void*)::__invoke(void*) + 146 (thd.cc:146) 5 libsystem_pthread.dylib 0x482c _pthread_start + 104 6 libsystem_pthread.dylib 0xcd8 thread_start + 8 Can anyone help me understand why this is a crash?

Hi! Could you please point me to the official documentation or recommended approach for launching the host app from a Share Extension? The scenario is: The user is sharing some text to my app. I need launch App and show this text. At the moment, I'm using the following hack: let selector = NSSelectorFromString("sharedApplication") if let app = UIApplication.perform(selector)?.takeUnretainedValue() as? UIApplication, app.responds(to: #selector(UIApplication.open(_:options:completionHandler:))) { app.open(url, options: [:], completionHandler: nil) } This does work, but it's terrible. So, the question: What is the official way to open the host app from within a Share Extension? Thanks!

In macOS 26 I noticed there is a section Menu Bar in System Settings which allows to toggle visibility of status items created with NSStatusItem. I'm assuming this is new, since I never noticed it before. Currently my app has a menu item that allows toggling its status item, but now I wonder whether it should always create the status item and let the user control its visibility from System Settings. Theoretically, keeping this option inside the app could lead to confusion if the user has previously disabled the status item in System Settings, then perhaps forgot about it, and then tries to enable it inside the app, but apparently nothing happens because System Settings overrides the app setting. Should I remove the option inside the app? This also makes me think of login items, which can be managed both in System Settings and inside the app via SMAppService. Some users ask why my app doesn't have a launch at login option, and I tell them that System Settings already offers that functionality. Since there is SMAppService I could offer an option inside the app that is kept in sync with System Settings, but I prefer to avoid duplicating functionality, particularly if it's something that is changed once by the user and then rarely (if ever) changed afterwards. But I wonder: why can login items be controlled by an app, and the status item cannot (at least I'm not aware of an API that allows to change the option in System Settings)? If the status item can be overridden in System Settings, why do login items behave differently?

I have used C APIs to create a XPC server(mach service) as a launch daemon. I use dispatch_source_create () followed by dispatch_resume() to start the listener. I dont have any code for cleaning up memory. I want to make sure that the XPC server is shutdown gracefully, without any memory leaks. I know that launchd handles the cycle and the XPC framework takes care of XPC objects. But do I need to do additional cleanup when the XPC listener is shutdown ?

Hi Team, We intend to create a custom serial dispatch queue targetting a global queue. let serialQueue = DispatchQueue(label: "corecomm.tallyworld.serial", target: DispatchQueue.global(qos: .default)) The documentation for DispatchQueue init does not show any minimum OS versions. BUT DispatchSerialQueue init does show iOS 17.0+ iPadOS 17.0+ Mac Catalyst macOS 14.0+ tvOS 17.0+ visionOS watchOS 10.0+. Does that mean - I will not be able to create a custom serial dispatch queue below iOS 17?

Hello, I'm developing a Mac application that uses a network extension. I'm trying to implement XPC to pass data between my main app and system extension and I'm using the SimpleFirewall demo app as a guide to do this. One thing I can't understand is how the ViewController in the SimpleFirewall main app has access to the class IPCConnection in the SimpleFirewallExtension without it being public and without SimpleFirewallExtension being imported in ViewController.

I’m trying to enable Background Modes (specifically for audio, background fetch, remote notifications) in my iOS SwiftUI app, but I’m getting this error: Provisioning profile “iOS Team Provisioning Profile: [my app]” doesn’t include the UIBackgroundModes entitlement. On the developer website when I make the provision profile It doesnt give me the option to allow background modes. I added it to the sign in capabilities seccion in X code and matched the bundle ID to the provision profile and certificate etc but it still runs this error because the provision profile doesnt have the entitlements..

An XPC service’s process has a system-managed lifecycle: the process is launched on-demand when another process tries to connect to it, and the system can decide to kill it when system resources are low. XPC services can tell the system when they shouldn’t be killed using xpc_transaction_begin/end. Do extensions created with ExtensionFoundation and/or ExtensionKit have the same behavior?

I am developing the application in Mac. My requirement is to start the application automatically when user login. I have tried adding the plist file in launch agents, But it doesn't achieve my requirement. Please find the code added in the launch agents <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>Label</key> <string>com.sftk.secure</string> <key>ProgramArguments</key> <array> <string>/Applications/Testing.app/Contents/MacOS/Testing</string> </array> <key>RunAtLoad</key> <true/> <key>KeepAlive</key> <false/> </dict> </plist> I have tried by adding manually in the setting, but it was opened sometimes and closed suddenly. On open manually it works. Please provide a solution to start the application automatically on system starts

I have several processes maintaining NSXPConnection to an XPC service. The connections are bi-directional. Each side service and clients) of the connection exports an object, and an XPCInterface. The @protocols are different - to the service, and from the service to clients. So long as all the "clients" fully implement their "call-back" @protocol, there's no problem. All works fine. However - If a client does NOT implement a method in the "call back protocol", or completely neglects to export an object, or interface - and the service attempts to call back using the nonexistent method -- the XPC connection invalidates immediately. So far - expected behaviour. However, if I want the service to behave to the client a little like a "delegate" style -- and check first whether the client "respondsToSelector" or even - supports an interface BEFORE calling it, then this doesn't work. When my XPC service tries the following on a client connection: if (xpcConnection.remoteObjectInterface == nil) os_log_error(myXPCLog, "client has no remote interface); the condition is never met - i.e. the "remoteObjectInterface is never nil even when the client does NOT configure its NSXPCConnection with any incoming NSXPCInterface, and does not set an "exportedObject" Furthermore, the next check: if ([proxy respondsToSelector:@selector(downloadFiltersForCustomer:withReply:)]) { } will not only fail - but will drop the connection. The client side gets the invalidation with the following error: <NSXPCConnection: 0x600000b20000> connection to service with pid 2477 named com.proofpoint.ecd: received an undecodable message for proxy 1 (no exported object to receive message). Dropping message. I guess the "undecidable message" is the respondsToSelector - because the code doesn't get to attempt anything else afterwards, the connection drops. Is there a way to do this check "quietly", or suffering only "interruption", but without losing the connection,

Hi. I'm trying to learn macOS app development. i'm trying to run unix commands: func execute(_ command: String) throws -&gt; String { let process = Process() let pipe = Pipe() process.executableURL = URL(fileURLWithPath: "/bin/bash") process.arguments = ["-c", command] process.standardOutput = pipe // process.standardError try process.run() process.waitUntilExit() guard let data = try pipe.fileHandleForReading.readToEnd() else { throw CommandError.readError } guard let output = String(data: data, encoding: .utf8) else { throw CommandError.invalidData } process.waitUntilExit() guard process.terminationStatus == 0 else { throw CommandError.commandFailed(output) } return output } when try to run "pgrep" in sandbox mode ON, i get: sysmon request failed with error: sysmond service not found error. if i turn it off it works. i don't know what to do. anyone can help me out?

Hi everyone, We’re developing a macOS SwiftUI app that uses a local Swift Package (CasSherpaCore) to invoke an external compiled binary (sherpa-onnx-offline-tts) for text-to-speech synthesis using system calls. The package works flawlessly when tested from terminal or via a lightweight test C program. However, when we invoke it from a SwiftUI app (even with Full Disk Access granted to Xcode and Terminal), we consistently get the error: sh: /Users/xxxxxxxxxxx/SherpaONNX/sherpa-onnx/build/bin/sherpa-onnx-offline-tts: Operation not permitted We’ve tried: Granting Full Disk Access to Xcode and Terminal. Removing the quarantine flag with xattr -d com.apple.quarantine. Setting executable permission via chmod +x. Using both system() and Process in C and Swift contexts. Testing within a Swift Package that’s integrated into the app as a local dependency. Running the command manually from terminal (works perfectly). It appears that macOS (or Xcode’s runtime sandbox) is restricting execution of binaries from certain locations or contexts when launched via system() inside the app. Questions: Is there a specific entitlement or configuration that allows execution of local binaries from a SwiftUI macOS app? Is this related to System Integrity Protection (SIP) or a hardened runtime limitation? Are there best practices or alternative approaches to safely execute local TTS binaries from within a Swift app? Any help would be deeply appreciated. This is a core feature in our project and we’re stuck at this point. Thank you so much in advance!

My app is for personal use currently, so distribution won't be a problem. It registers a privileged helper using SMAppService, and I was wondering whether there is a way to customize the authorization dialog that the system presents to the user.

Im using the low-level C xpc api <xpc/xpc.h> and i get this error when I run it: Underlying connection interrupted. I know this error stems from the call to xpc_session_send_message_with_reply_sync(session, message, &reply_err);. I have no previous experience with xpc or dispatch and I find the xpc docs very limited and I also found next to no code examples online. Can somebody take a look at my code and tell me what I did wrong and how to fix it? Thank you in advance. Main code: #include <stdio.h> #include <xpc/xpc.h> #include <dispatch/dispatch.h> // the context passed to mainf() struct context { char* text; xpc_session_t sess; }; // This is for later implementation and the name is also rudimentary void mainf(void* c) { //char * text = ((struct context*)c)->text; xpc_session_t session = ((struct context*)c)->sess; dispatch_queue_t messageq = dispatch_queue_create("y.ddd.main", DISPATCH_QUEUE_SERIAL); xpc_object_t message = xpc_dictionary_create(NULL, NULL, 0); xpc_dictionary_set_string(message, "test", "eeeee"); if (session == NULL) { printf("Session is NULL\n"); exit(1); } __block xpc_rich_error_t reply_err = NULL; __block xpc_object_t reply; dispatch_sync(messageq, ^{ reply = xpc_session_send_message_with_reply_sync(session, message, &reply_err); if (reply_err != NULL) printf("Reply Error: %s\n", xpc_rich_error_copy_description(reply_err)); }); if (reply != NULL) printf("Reply: %s\n", xpc_dictionary_get_string(reply, "test")); else printf("Reply is NULL\n"); } int main(int argc, char* argv[]) { // Create seperate queue for mainf() dispatch_queue_t mainq = dispatch_queue_create("y.ddd.main", DISPATCH_QUEUE_CONCURRENT); dispatch_queue_t xpcq = dispatch_queue_create("y.ddd.xpc", NULL); // Create the context being sent to mainf struct context* c = malloc(sizeof(struct context)); c->text = malloc(sizeof("Hello")); strcpy(c->text, "Hello"); xpc_rich_error_t sess_err = NULL; xpc_session_t session = xpc_session_create_xpc_service("y.getFilec", xpcq, XPC_SESSION_CREATE_INACTIVE, &sess_err); if (sess_err != NULL) { printf("Session Create Error: %s\n", xpc_rich_error_copy_description(sess_err)); xpc_release(sess_err); exit(1); } xpc_release(sess_err); xpc_session_set_incoming_message_handler(session, ^(xpc_object_t message) { printf("message recieved\n"); }); c->sess = session; xpc_rich_error_t sess_ac_err = NULL; xpc_session_activate(session, &sess_ac_err); if (sess_err != NULL) { printf("Session Activate Error: %s\n", xpc_rich_error_copy_description(sess_ac_err)); xpc_release(sess_ac_err); exit(1); } xpc_release(sess_ac_err); xpc_retain(session); dispatch_async_f(mainq, (void*)c, mainf); xpc_release(session); dispatch_main(); } XPC Service code: #include <stdio.h> #include <xpc/xpc.h> #include <dispatch/dispatch.h> int main(void) { xpc_rich_error_t lis_err = NULL; xpc_listener_t listener = xpc_listener_create("y.getFilec", NULL, XPC_LISTENER_CREATE_INACTIVE, ^(xpc_session_t sess){ printf("Incoming Session: %s\n", xpc_session_copy_description(sess)); xpc_session_set_incoming_message_handler(sess, ^(xpc_object_t mess) { xpc_object_t repl = xpc_dictionary_create_empty(); xpc_dictionary_set_string(repl, "test", "test"); xpc_rich_error_t send_repl_err = xpc_session_send_message(sess, repl); if (send_repl_err != NULL) printf("Send Reply Error: %s\n", xpc_rich_error_copy_description(send_repl_err)); }); xpc_rich_error_t sess_ac_err = NULL; xpc_session_activate(sess, &sess_ac_err); if (sess_ac_err != NULL) printf("Session Activate: %s\n", xpc_rich_error_copy_description(sess_ac_err)); }, &lis_err); if (lis_err != NULL) { printf("Listener Error: %s\n", xpc_rich_error_copy_description(lis_err)); xpc_release(lis_err); } xpc_rich_error_t lis_ac_err = NULL; xpc_listener_activate(listener, &lis_ac_err); if (lis_ac_err != NULL) { printf("Listener Activate Error: %s\n", xpc_rich_error_copy_description(lis_ac_err)); xpc_release(lis_ac_err); } dispatch_main(); }

My app uses SMAppService to register a privileged helper, the helper registers without errors, and can be seen in System Settings. I can get a connection to the service and a remote object proxy, but the helper process cannot be found in Activity Monitor and the calls to the proxy functions seem to always fail without showing any specific errors. What could be causing this situation?

SMAppService Error 108 "Unable to read plist" on macOS 15 Sequoia - Comprehensive Test Case Summary We have a fully notarized SMAppService implementation that consistently fails with Error 108 "Unable to read plist" on macOS 15 Sequoia, despite meeting all documented requirements. After systematic testing including AI-assisted analysis, we've eliminated all common causes and created a comprehensive test case. Error: SMAppServiceErrorDomain Code=108 "Unable to read plist: com.keypath.helperpoc.helper" 📋 Complete Repository: https://github.com/malpern/privileged_helper_help What We've Systematically Verified ✅ Perfect bundle structure: Helper at Contents/MacOS/, plist at Contents/Library/LaunchDaemons/ Correct SMAuthorizedClients: Embedded in helper binary via CREATE_INFOPLIST_SECTION_IN_BINARY=YES Aligned identifiers: Main app, helper, and plist all use consistent naming Production signing: Developer ID certificates with full Apple notarization and stapling BundleProgram paths: Tested both Contents/MacOS/helperpoc-helper and simplified helperpoc-helper Entitlements: Tested with and without com.apple.developer.service-management.managed-by-main-app What Makes This Different Systematic methodology: Not a "help me debug" post - we've done comprehensive testing Expert validation: AI analysis helped eliminate logical hypotheses Reproduction case: Minimal project that demonstrates the issue consistently Complete documentation: All testing steps, configurations, and results documented Use Case Context We're building a keyboard remapper that integrates with https://github.com/jtroo/kanata and needs privileged daemon registration for system-wide keyboard event interception. Key Questions Does anyone have a working SMAppService implementation on macOS 15 Sequoia? Are there undocumented macOS 15 requirements we're missing? Is Error 108 a known issue with specific workarounds? Our hypothesis: This appears to be a macOS 15 system-level issue rather than configuration error, since our implementation meets all documented Apple requirements but fails consistently. Has anyone encountered similar SMAppService issues on macOS 15, or can confirm a working implementation?