I am needing to access the ABM API via C#. Searching has directed me to use BouncyCastle. I have downloaded the PEM file. However, using the following: using (var reader = File.OpenText(pemFilePath)) { var pemReader = new PemReader(reader); var keyObject = pemReader.ReadObject(); I get the error "problem creating EC private key: System.NullReferenceException: Object reference not set to an instance of an object."

There is a longstanding restriction payload for supervised iOS devices that disables "Erase All Content and Settings." We have been experimenting with supervised watches paired with supervised phones that have that payload applied, and yet "Erase All Content and Settings" remains available on the watch. Is this: – a) An error with our payload? Should we be sending something else? – b) A bug in watchOS supervision? – c) A deliberate design choice? If so, what is the rationale for preventing organizations from maintaining this very basic level of control over devices they may be configuring and dispatching into the field?

I'm currently implementing a managed app using the new AppConfig specification. I referred to Apple's official documentation: Specifying and decoding a configuration. Based on the example provided in the "Publish your configuration specification" section, I structured my application configuration plist like this: <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>configuration</key> <dict> <key>account</key> <dict> <key>username</key> <string>test user</string> <key>password</key> <string>test 123</string> </dict> <key>domain</key> <string>test example.com</string> </dict> </dict> </plist> When I deployed this configuration via my MDM server, the server reported valid for the activation, configuration and asset (which is the plist), but the configuration did not reflect or apply within my app. My app was unable to retrieve these settings. After some troubleshooting, I found that removing the top-level <key>configuration</key> wrapper resolved the issue. The following plist structure successfully pushed the configuration to my app: <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>account</key> <dict> <key>username</key> <string>test user</string> <key>password</key> <string>test 123</string> </dict> <key>domain</key> <string>test example.com</string> </dict> </plist> My question is: Is the inclusion of the <key>configuration</key> wrapper (as shown in the Apple documentation example) incorrect for the current AppConfig implementation? Or is this structure intended for a future release (e.g., iOS 26 or beyond) and the documentation implicitly refers to it, causing confusion for current implementation? Any clarification would be greatly appreciated! Thank you!

ABM has introduced a target date for moving a device from one MDM server to a new one. However, there's nothing in the API for setting that when you use the API to move MDM server Am I missing something or does it just not exist? Thanks Caroline

When an iOS 26.0 device is prepared in supervised mode, wifi connection screen is showing when the device is restarted. This wifi connect appears always on restart. I have tried using Apple Configurator GUI and Command line (cfgutil) command. In both cases, The behavior Wifi screen is showing up on restart for supervised mode. Cfgutil command: cfgutil -C {Certificate} -K {Key} prepare --supervised --name {NAME} --host-cert {Certificate} --skip-all Note: In non-supervised mode and other iOS, the wifi screen is not showing. Apple Configurator version: 2.18 iOS version: 26.0 Device model: iPhone 11 and above. Anyone else facing this issue? Any help is super appreciated.

Hello, I'm currently working on implementing app installation features, referencing the app.managed.yaml declaration on GitHub: https://github.com/apple/device-management/blob/0a4527c5ea21825fd23e08273ccdb9e2302458ce/declarative/declarations/configurations/app.managed.yaml My question pertains to the InstallBehavior.Version key. The current specification indicates its type as <integer>: key: Version title: Version supportedOS: iOS: introduced: '26.0' macOS: introduced: '26.0' visionOS: introduced: '26.0' type: <integer> Is there a way to specify the app version using a string format, such as x.y.z, instead of the integer (App Store External Version Identifier - EVID)? Allowing for a simpler version specification would make app version management through MDM more flexible and efficient. I believe this would significantly streamline the deployment and operation of Apple devices within organizations. Any guidance or consideration for this would be greatly appreciated. Thank you.

"If your app includes any links outside the app, or offers any in-app or other purchasing opportunities, make sure these are behind a parental gate" Super Awesome and Kidoz are proving with a parental gate on ad click and they also claim that all ads are manually approved (another criteria for ads in Kids apps). So these two are the only ad networks we can use moving forward. Or we can use ad networks like Admob as well? I dont intend not to be in Kids category - so leaving Kids category is not a choice.

Hello, I have implemented my virtual meeting extension and my application shows no issues in the calendar application, with a join button displayed. Everything is great!. However, with the help of EKEventEditViewController and EKEvent instances, when creating an event from the main target of the application using EventKitUI, the event will not be displayed as a virtual meeting. I have seen that other applications like Zoom have already implemented this, and I find it difficult to find relevant documentation on how to link events created by the program to virtual meetings. How do I set an event as a meeting when I want to add it to the main program? In addition, the function in the VirtualConferenceProvider.swift file of the extension program fetchVirtualConference(identifier: EKVirtualConferenceRoomTypeIdentifier, completionHandler: @escaping (EKVirtualConferenceDescriptor?, (any Error)? ）->Void) How are the parameters in this function obtained? It's impossible for every conference related link to be the same

"To receive payments from Apple, you must add a bank account." As an Apple "Individual" developer, can I accept payments to my corporate card?

We are currently working on a SCEP server implementation that operates in FIPS-approved mode. In this mode, RSA PKCS#1 v1.5 encryption is disallowed due to compliance requirements, and only FIPS-approved padding schemes such as RSA-OAEP are permitted. However, we have observed that the SCEP client functionality on Apple devices currently does not support RSA-OAEP for CMS EnvelopedData decryption. This creates a challenge for us in ensuring FIPS compliance while maintaining compatibility with Apple devices during certificate enrollment through SCEP. We would appreciate your guidance on the following: Are there any alternative FIPS-approved encryption algorithms or configurations supported by Apple devices for SCEP CMS EnvelopedData decryption? Is there any plan or timeline for future support of RSA-OAEP on Apple platforms for this use case? Feedback raised along with sysdiagnose logs as well : FB17655410

Hi, We're having problems starting an Ad Hoc ipa on an iPad with iOS 12.7.7 and 12.7.8, probably iOS 12 in general. The iPad's UUID is added to the certificate. And we don't have problems with iOS versions > iOS 12. Here is the anonymized Console Log: default 09:05:12.088994+0100 SpringBoard immediate edge swipe: failed default 09:05:12.095189+0100 SpringBoard Icon touch began: <private> default 09:05:12.096204+0100 SpringBoard Found a reasonable launch image for <private>, not pre-warming SplashBoard. Load image into the snapshot instance. default 09:05:12.117737+0100 powerd Activity changes from 0x2 to 0x1. UseActiveState:1 default 09:05:12.118572+0100 powerd hidActive:1 displayOff:0 assertionActivityValid:0 now:0xcb6 hid_ts:0xcb6 assertion_ts:0x0 default 09:05:12.145354+0100 backboardd [HID] [MT] dispatchEvent Dispatching event with 1 children, _eventMask=0x23 _childEventMask=0x3 Cancel=0 Touching=0 inRange=0 default 09:05:12.152820+0100 SpringBoard Icon tapped: <private> default 09:05:12.158236+0100 dasd Trigger: <private> is now [1] default 09:05:12.159538+0100 dasd Don't have <private> for type 1 default 09:05:12.170128+0100 trustd cert[0]: SubjectCommonName =(leaf)[]> 0 default 09:05:12.170407+0100 trustd cert[0]: LeafMarkerOid =(leaf)[]> 0 default 09:05:12.182388+0100 trustd OCSPSingleResponse: nextUpdate 0.54 days ago default 09:05:12.186084+0100 trustd OCSPSingleResponse: nextUpdate 0.62 days ago default 09:05:12.187067+0100 SpringBoard Trust evaluate failure: [leaf IssuerCommonName LeafMarkerOid SubjectCommonName] default 09:05:12.238604+0100 trustd Task <TASK_UUID_REDACTED_1>.<1> resuming, QOS(0x19) default 09:05:12.240650+0100 trustd TIC TCP Conn Start [12:0xADDR_REDACTED] default 09:05:12.241136+0100 trustd [C12 Hostname#HASH_REDACTED:80 tcp, pid: PID_REDACTED, url hash: HASH_REDACTED] start default 09:05:12.245884+0100 trustd TIC TCP Conn Start [13:0xADDR_REDACTED] default 09:05:12.246361+0100 trustd [C13 Hostname#HASH_REDACTED:80 tcp, pid: PID_REDACTED, url hash: HASH_REDACTED] start default 09:05:12.256520+0100 trustd nw_connection_report_state_with_handler_locked [C12] reporting state failed error Network is down error 09:05:12.256978+0100 trustd TIC TCP Conn Failed [12:0xADDR_REDACTED]: 1:50 Err(50) error 09:05:12.262697+0100 trustd Task <TASK_UUID_REDACTED_1>.<1> HTTP load failed (error code: -1009 [1:50]) error 09:05:12.271646+0100 trustd Task <TASK_UUID_REDACTED_1>.<1> load failed with error Error Domain=NSURLErrorDomain Code=-1009 "The Internet connection appears to be offline." default 09:05:12.271898+0100 trustd Failed to download ocsp response http://ocsp.apple.com/ocsp03-wwdrg311/... with error Error Domain=NSURLErrorDomain Code=-1009 "The Internet connection appears to be offline." default 09:05:12.280643+0100 SpringBoard Activating <private> from icon default 09:05:12.281399+0100 CommCenter #I CTServerConnection from pid PID_REDACTED has closed (conn=0xADDR_REDACTED) default 09:05:12.513629+0100 SpringBoard Bootstrapping com.example.myapp with intent foreground-interactive default 09:05:12.514084+0100 assertiond Submitting new job for "com.example.myapp" on behalf of <BKProcess: 0xADDR_REDACTED; SpringBoard; com.apple.springboard; pid: PID_REDACTED; ...> default 09:05:12.514909+0100 assertiond Submitted job with label: UIKitApplication:com.example.myapp[REDACTED][REDACTED] error 09:05:12.516769+0100 SpringBoard [com.example.myapp] Bootstrap failed with error: <NSError: 0xADDR_REDACTED; domain: BKSProcessErrorDomain; code: 1 (bootstrap-failed); reason: "Failed to start job"> error 09:05:12.516935+0100 SpringBoard Bootstrapping failed for <FBApplicationProcess: 0xADDR_REDACTED; com.example.myapp; pid: -1> with error: Error Domain=BKSProcessErrorDomain Code=1 "Unable to bootstrap process with bundleID com.example.myapp" default 09:05:12.517589+0100 SpringBoard <FBApplicationProcess: 0xADDR_REDACTED; com.example.myapp; pid: -1> exited. default 09:05:12.542638+0100 SpringBoard Application process state changed for com.example.myapp: <SBApplicationProcessState: 0xADDR_REDACTED; pid: -1; taskState: Not Running; visibility: Unknown> default 09:05:13.072994+0100 SpringBoard Front display did change: <SBApplication: 0xADDR_REDACTED; com.example.myapp> Is there any know problem with running Ad Hoc ipas on iOS 12? Thanks Christian

Hello All, I come to ask a question that I haven't been able to find the docs. I continue to work on implementing declarative management and while working there is a question/concern I have. I have noticed that during some destructive testing, if the device is attempting to fetch a configuration and the server responds with a 503 (or any server related error) then the device will wipe all configurations and attempt to reapply them. Is there any way to prevent this by intercepting status codes or would the only real solution be to force down a temp/test config if the real config can't be fetched from the server?

Is there any mechanism to restrict camera usage on a user-owned device, once they have opted in, consented to the restriction, and installed a management profile? Documentation suggests it was possible with allowCamera, but has be deprecated on unsupervised devices. Am I understanding correctly that it's simply not possible anymore unless the device is supervised?

short version question: why some users after deleting and downloading back my in-house app, cannot start the new process for approving developer, but instead it tries to start and then crashes immediately? long question version I am maintaining an in-house distributed enterprise app. due to update in iOS 18 update here users need to trust the developer via a new procedure that involves restarting device and inserting the phone code. after thousands (more or less 30.000) of users with no issue at all, some of them has this problem, the old (expired)trust seems to be persistent and never updated. Standard events a user deletes the app via settings > general > VPN & device management or via classic persistent touch procedure checks no other presence of the app is on the device via spotlight. since it is the only app with "MyDeveloperName" on the phone, if users goe back to VPN & device management screen, no app or developer will be present. user downloads new version of the app. If taps directly on the icon there is a system alert with says the developer must be trusted. a this point in settings > general > VPN & device management you can find a line with developer name, tapping on it we find a screen where user finds a white button with BLUE message "authorize MyDeveloperName" and follows procedure. My issue is that some users get following different behavior, and I do not understand why: ❌ tapping on downloaded app icon: no alert, but app tries to start then crashes. ❌ going in VPN & device management screen there is only RED write button "delete app" in both paths, working and not working, the app results "verified" in VPN & device management screen (Apple says old authorizations are preserved.)

When I try to sign in Managed Apple ID in supervised device there appears a prompt stating that "Apple ID" is a work account.This account must be signed in as a work account on this device.When I click continue it takes to VPN and device management tab where MDM profile already exists. Note:The managed Apple ID has a ICloud subscription for it. When I remove the subscription for the Apple ID and try to sign in, it works. Kindly help on this or advise on any additional steps required to enable sign in for managed Apple ID in this scenario

Hello All, I am currently attempting to get application config working with enterprise apps but it seems as though the asset config is not applying at all. While the asset and application install correctly it does not seem that the config is read at all judging from the status message returned. "StatusItems" : { "app" : { "managed" : { "list" : [ { "name" : "apps", "config-state" : { "app-config-state" : { "state" : "unknown" } }, "identifier" : "app.identifier", "version" : "3.2", "short-version" : "3.2.0", "state" : "managed", "declaration-identifier" : "dec-identifier" } ] } } }, "Errors" : [ ] } The asset file being sent down is as follows: <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>Config 1</key> <string>Value 1</string> <key>Config 2</key> <string>Value 2</string> <key>Config 3</key> <string>Value 3</string> </dict> </plist> This is the config report being sent back by the device after everything has been fetched: "StatusItems" : { "management" : { "declarations" : { "activations" : [ { "active" : true, "identifier" : "group.activation.payload", "valid" : "valid", "server-token" : "56792E4AE25C3286640B45E6BD265AE97545B2B87F90A6355919FD8B2E3C3AB3" } ], "configurations" : [ { "active" : true, "identifier" : "app.install", "valid" : "valid", "server-token" : "34D7ACECAE16EE9EEAC0630FF2FF85524FFBB5BA3CB18CFB6296FBC860368C85" }, { "active" : true, "identifier" : "ios.policy.subscription.list", "valid" : "valid", "server-token" : "376913E11BE7D26EC745B3B68C6FA94C4FC061B1B736D143EBE0F12FF73ADFF8" } ], "assets" : [ { "active" : true, "identifier" : "app.config.reference", "valid" : "valid", "server-token" : "1CFBE30EB56309005F742D667B80242E6A3CDC08ED228D0BC5F87749C6BBAB77" } ], "management" : [ ] } }, "app" : { "managed" : { "list" : [ { "state" : "downloading", "declaration-identifier" : "app.install", "identifier" : "app.identifier", "name" : "apps", "config-state" : { "app-config-state" : { "state" : "unknown" } } } ] } } }, "Errors" : [ ] } Additional info would be useful, though a sysdiagnosis will be submitted to feedback as well. Config did apply correctly when sending down through Install application command

Hello All, I am currently developing a mobile management system using declarative management and for the most part it is pretty great. There is one consistent issue I have run into and it comes when testing VPP app installs with not enough licenses. When my server detects that it can't provide a license ID it will return a 404, which causes the rest of the DM syncing to stop, and the activation to throw an error. Per the documentation for using simple activation: An array of strings that specify the identifiers of configurations to install. A failure to install one of the configurations doesn’t prevent other configurations from installing The above would imply that if a config fails it should not affect anything else (aside from possibly reporting an error. Am I returning the wrong error code for it to continue or is the behavior correct and the documentation is wrong? Any additional info would be useful

Hello, We are working with an iOS app that is distributed as a Public Unlisted App Store app. Our MDM allows us to import the app by URL, but when added this way, the app is marked as unmanaged in the inventory. Because of that, we cannot assign a Managed App Configuration payload to it in the normal way. What we are trying to achieve: Deliver a configuration profile to all enrolled devices before the app is installed. When the user installs the app from the MDM catalog, the app should immediately see the configuration values. Questions we’re hoping to clarify: Is it technically feasible to pre-provision a Managed App Configuration for an app in this scenario, by pushing a .mobileconfig profile to all devices? If yes, what would be the correct payload format and content of such a .mobileconfig file? We’ve tested a profile format we found here that uses com.apple.managed-app-config PayloadType and a ManagedAppConfiguration key with the bundle ID nested inside, but iOS reports this as “payload not recognized.” From what we understand, that may not be part of Apple’s schema. Any guidance from Apple or the community on whether this use case is possible (and, if so, what the valid profile format should look like) would be very helpful. Note: For a complicated company policy, at the moment we are not able to participate in ABM. Thanks in advance!

10:17:34.335397+0900 Process SpringBoard Bootstrapping failed for <FBApplicationProcess: 0x4d8eca700; app<com.a.b.c>:> with error: <NSError: 0x300a3d1d0; domain: RBSRequestErrorDomain; code: 5; "Launch failed."> { NSUnderlyingError = <NSError: 0x300a54090; domain: NSPOSIXErrorDomain; code: 85> { NSLocalizedDescription = Launchd job spawn failed; }; }

We install two in-house apps. The first app is installed using the standard in-house method, while the second app is installed via MDM commands. Both apps share the same Team ID and use Keychain sharing to exchange data. However, when the MDM profile is deleted and the second app is removed, the first app intermittently encounters issues and does not function properly. However, when the MDM mobileconfig is reinstalled and the second app is installed again, the first app that was not functioning starts working properly. We have thoroughly reviewed the logs but have not been able to find a solution. Your assistance would be greatly appreciated. We have extracted and attached the device logs that were generated during the error occurrence. log.log