I didn't find a suggestion box on Swift's website so I'll post it here. SwiftCharts are great but limited. I need more data on a single chart. Candlestick and OHLC type charts would be an excellent addition. Hopefully, influencers from Apple can make that happen. Thanks.

I'm making an apple watch game and it's running so smooth and nice while developing but I ran into a showstopping problem that I wouldn't even have noticed until i deleted the app and reinstalled... Every first-run on a freshly installed copy of the game has major frame hitches as it loads assets. Every run after that has ZERO hitches and runs like butter. Even if i install a new version on top of the old one (which is why i never noticed this problem in my almost finished game) it runs smooth. Framerate issues come back if I delete and reinstall. I think it's compiling shaders or caching geometry but I haven't been able to trick it into doing the hard work during non-critical moments in the game. I've tried preloading assets in the main menu, loading at the start of the level, loading and rendering in a tiny part of the screen, rendering behind dialog boxes... it seems no matter what i can only get rid of the frame hitches after the game has been played through once... and I'm going to lose all customers on that first terrible impression even though the game is actually really good and fun when it's running properly... Any suggestions how i can prewarm/precompile the assets to avoid framerate hitches and freezes during gameplay? I thought I was so close to release but I feel this is un-shippable! I can send a link to my test flight build to anyone that wants to see the problem first hand. Also please note that I am artist-forward with a technical lean, but certainly not a real programmer, unfortunately. Jiovanie

HI all, I'm in the early stages of testing a game that will have real-time device-to-device communication using GameCenter. I've read something about setting up GameCenter "sandbox" accounts to test prior to the game's release, but I can't find anything reliable about how to do so. I've found lots of web pages which purport to describe how to do this task, but what they describe seems to be outdated, as the steps don't appear to be available in modern versions of iOS. I'm testing on iOS 18 and 26. Document search isn't helping--I mostly find information on how to set up StoreKit sandbox accounts, which I assume are different things altogether--so if you could point me towards an article that allows me to test a new, unreleased GameKit app between devices, I'd appreciate it. People are developing GameCenter apps, so I know it's possible... advTHANKSance

Hello, Thank you for attending today’s Metal & game technologies group lab at WWDC25! We were delighted to answer many questions from developers and energized by the community engagement. We hope you enjoyed it and welcome your feedback. We invite you to carry on the conversation here, particularly if your question appeared in Slido and we were unable to answer it during the lab. If your question received feedback let us know if you need clarification. You may want to ask your question again in a different lab e.g. visionOS tomorrow. (We realize that this can be confusing when frameworks interoperate) We have a lot to learn from each other so let’s get to Q&A and make the best of WWDC25! 😃 Looking forward to your questions posted in new threads.

Dear Apple Developer Support, I hope this message finds you well. I am a game developer looking to integrate Game Center into our game. Before proceeding, I would like to understand the analytical capabilities available post-integration. Specifically, I am interested in tracking detailed metrics such as: The number of new player downloads driven by Game Center features (e.g., friend challenges, leaderboards, or achievements). Data on user engagement and conversions originating from Game Center interactions. I have explored App Store Connect’s App Analytics but would appreciate clarification on whether Game Center-specific data (e.g., referrals from challenges or social features) is available to measure growth and optimize our strategies. If such data is accessible, could you guide me on how to view it? If not, are there alternative methods or plans to incorporate this in the future? Thank you for your time and assistance. I look forward to your response. Best regards, Bella

The sample code just draw a triangle and sample texture. both sample code can draw a correct triangle and sample texture as expected. there are no error message from terminal. Sample code using constexpr Sampler can capture and replay well. Sample code using a argumentTable to bind a MTLSamplerState was crashed when using Metal capture and replay on Xcode. Here are sample codes. Sample Code Test Environment: M1 Pro MacOS 26.3 (25D125) Xcode Version 26.2 (17C52) Feedback ID: FB22031701

I'm new here so I don't know what's this function belongs to which topic... Sorry about that! I watched the WWDC stream and I am really interested in this function, I'm wondering if this function could be used in my apps. I looked up the document but I find it only support visionOS(i'm not sure about that, but I saw the demo is base on the visionOS)

Using Reality Composer Pro 2.0, I created a simple shader graph that displays a texture on an unlit surface: On visionOS 2 beta, I can successfully use ShaderGraphMaterial(named:from:in:) to load that shader graph material and assign it to a model entity. However, on visionOS 1.2 and earlier, either in Simulator or on the device, ShaderGraphMaterial(named:from:in:) fails and I see the following logged to the console: If, using Reality Composer Pro 1.0, I experimentally open the same project and delete and recreate exactly the same nodes above, then ShaderGraphMaterial(named:from:in:) works as expected on visionOS 1.2. Is it a known issue that Reality Composer 2 can't be used with visionOS 1? Is this intentional behavior? I've submitted feedback as FB14828873, including a sample project and repro steps. If possible, I would appreciate guidance from an Apple engineer, like "This is a known issue for [list of node types]" or "Reality Composer Pro 2 is not supported for visionOS 1 development, please refer to [documentation]" or "We recommend [workaround]." Thank you.

What is Game Mode? Game Mode optimizes your gaming experience by giving your game the highest priority access to your CPU and GPU, lowering usage for background tasks. And it doubles the Bluetooth sampling rate, which reduces input latency and audio latency for wireless accessories like game controllers and AirPods. See Use Game Mode on Mac See Port advanced games to Apple platforms How can I enable Game Mode in my game? Add the Supports Game Mode property (GCSupportsGameMode) to your game’s Info.plist and set to true Correctly identify your game’s Application Category with LSApplicationCategoryType (also Info.plist) Note: Enabling Game Mode makes your game eligible but is not a guarantee; the OS decides if it is ok to enable Game Mode at runtime An app that enables Game Mode but isn’t a game will be rejected by App Review. How can I disable Game Mode? Set GCSupportsGameMode to false. Note: On Mac Game Mode is automatically disabled if the game isn’t running full screen.

Hi , My application meet below crash backtrace at very low repro rate from the public users, i do not see it relate to a specific iOS version or iPhone model. The last code line from my application is calling CAMetalLayer nextDrawable API. I did some basic studying, suppose it may relate to the wrong CAMetaLayer configuration, like frame property w or h <= 0.0 bounds property w or h <= 0.0 drawableSize w or h <= 0.0 or w or h > max value (like 16384) Not sure my above thinking is right or not? Will the UIView which my CAMetaLayer attached will cause such nextDrawable crash or not ? Thanks a lot Main Thread - Crashed libsystem_kernel.dylib __pthread_kill libsystem_c.dylib abort libsystem_c.dylib __assert_rtn Metal MTLReportFailure.cold.1 Metal MTLReportFailure Metal _MTLMessageContextEnd Metal -[MTLTextureDescriptorInternal validateWithDevice:] AGXMetalA13 0x245b1a000 + 4522096 QuartzCore allocate_drawable_texture(id<MTLDevice>, __IOSurface*, unsigned int, unsigned int, MTLPixelFormat, unsigned long long, CAMetalLayerRotation, bool, NSString*, unsigned long) QuartzCore get_unused_drawable(_CAMetalLayerPrivate*, CAMetalLayerRotation, bool, bool) QuartzCore CAMetalLayerPrivateNextDrawableLocked(CAMetalLayer*, CAMetalDrawable**, unsigned long*) QuartzCore -[CAMetalLayer nextDrawable] SpaceApp -[MetalRender renderFrame:] MetalRenderer.mm:167 SpaceApp -[FrameBuffer acceptFrame:] VideoRender.mm:173 QuartzCore CA::Display::DisplayLinkItem::dispatch_(CA::SignPost::Interval<(CA::SignPost::CAEventCode)835322056>&) QuartzCore CA::Display::DisplayLink::dispatch_items(unsigned long long, unsigned long long, unsigned long long) QuartzCore CA::Display::DisplayLink::dispatch_deferred_display_links(unsigned int) UIKitCore _UIUpdateSequenceRun UIKitCore schedulerStepScheduledMainSection UIKitCore runloopSourceCallback CoreFoundation __CFRUNLOOP_IS_CALLING_OUT_TO_A_SOURCE0_PERFORM_FUNCTION__ CoreFoundation __CFRunLoopDoSource0 CoreFoundation __CFRunLoopDoSources0 CoreFoundation __CFRunLoopRun CoreFoundation CFRunLoopRunSpecific GraphicsServices GSEventRunModal UIKitCore -[UIApplication _run] UIKitCore UIApplicationMain

I am using Unreal Engine 5.6 on a MacBook Pro with an M3 chip and macOS 15.5. I’ve installed Xcode and accepted the license, but Unreal is not detecting the latest Metal Shader Standard (Metal v3.0). The maximum version Unreal sees is Metal v2.4, even though the hardware and OS should support Metal 3.0. I’ve also run sudo xcode-select -s /Applications/Xcode.app and accepted the license via Terminal. Is there anything in Xcode settings, SDK availability, or system permissions that could be preventing access to Metal 3.0 features?"

Can't seem to get the Metal HUD to display value range's (pre 26 Tahoe). The documented environment variable MTL_HUD_SHOW_VALUE_RANGE doesn't seem to work. https://developer.apple.com/documentation/xcode/monitoring-your-metal-apps-graphics-performance#Display-the-value-range-of-metrics Anyone having any luck?

Hello, When testing GameKit "Manage Game Progress" in Xcode 26: On iOS devices, achievements, leaderboards, and party code data display and work correctly. On macOS devices, none of these data appear in "Manage Game Progress." Is this a known issue with macOS GameKit, or is there a limitation compared to iOS? If it is not a bug, is there any additional configuration needed to make achievements and leaderboards visible on macOS? I also included the GameKit bundle in my macOS app and enabled Enable Debug Mode in GameKit Configuration in the scheme options. Thank you.

Hello RealityKit developers, I'm currently working on physics simulations in my visionOS app and am trying to adapt the concepts from the official sample Simulating physics joints in your RealityKit app. In the sample, a sphere is connected to the ceiling using a PhysicsRevoluteJoint to create a hinge-like simulation. I've successfully modified this setup to use a PhysicsSphericalJoint instead. The basic replacement works as expected: pin1 (attached to the sphere) rotates freely around pin0 (attached to the ceiling), much like a ball-and-socket joint should, removing all translational degrees of freedom. My challenge lies with the PhysicsSphericalJoint's angularLimitInYZ property. The documentation mentions that this property allows limiting the rotation around the Y and Z axes, defining an "elliptical cone shape around the x-axis of pin0." However, I'm struggling to understand how to specify these values to achieve a desired rotational limit. If I have a sphere that is currently capable of rotating 360 degrees around pin0 (like a free-spinning ball on a string), how would I use angularLimitInYZ to restrict its rotation to a certain height or angular range, preventing it from completing a full circle? Specifically, I'm trying to achieve a "swing" like behavior where the sphere oscillates back and forth but cannot rotate completely overhead or underfoot. What values or approach should I use for the angularLimitInYZ tuple to define such a restricted pendulum-like motion? Any insights, code examples, or explanations on how to properly configure angularLimitInYZ for this kind of behavior would be incredibly helpful! The following code is modified from the sample. extension MainView { func addPinsTo(ballEntity: Entity, attachmentEntity: Entity) throws { let hingeOrientation = simd_quatf(from: [1, 0, 0], to: [0, 0, 1]) let attachmentPin = attachmentEntity.pins.set( named: "attachment_hinge", position: .zero, orientation: hingeOrientation ) let relativeJointLocation = attachmentEntity.position( relativeTo: ballEntity ) let ballPin = ballEntity.pins.set( named: "ball_hinge", position: relativeJointLocation, orientation: hingeOrientation ) // Create a PhysicsSphericalJoint between the two pins. let revoluteJoint = PhysicsSphericalJoint(pin0: attachmentPin, pin1: ballPin) try revoluteJoint.addToSimulation() } } The following image is a screenshot of the operation when changing to PhysicsSphericalJoint. Thank you in advance for your assistance.

Developing a prototype Vision Pro app and would like to render a 3D scene made from Reality Composer Pro on an image anchor in a RealityView. But I have no luck so far to make it work and need some guidance to move on. I got the image file stored in the assets like below: And from below is the source codes: import SwiftUI import RealityKit import RealityKitContent struct AnchorView: View { @State var imageEntity: Entity = { let anchorEntity = AnchorEntity(.image(group: "AR Resources", name: "reanchor")) return anchorEntity }() var body: some View { RealityView { content in do { // Add the initial RealityKit content if let scene = try? await Entity(named: "Scene", in: realityKitContentBundle) { imageEntity.addChild(scene) content.add(imageEntity) } } catch { print("Error occurs when adding reality view content: \(error)") } } } }

I'm in the process of converting my SceneKit game to RealityKit. In SceneKit I used to be able to mark nodes as selected by setting SCNMaterial.emission with a custom color. I can do the same with PhysicallyBasedMaterial.emissiveColor, but I'd like to keep my entitities unaffected by the scene lights by using UnlitMaterial. In SceneKit I can set a category mask to indicate what light should affect what node, but there doesn't seem to be such a thing in RealityKit. So at the moment it seems like I have to choose between being able to mark an entity as selected, or having entities unaffected by lighting, but not both. Is there some effect or component I can use to mark entities as selected by applying some coloring regardless of the material used?

I rewrote my graphics pipeline to use Load/Store better for clearing and don't care cases. All my tests pass, and in the Metal debugger, all the draw calls succeed. But when I present drawables (before [commandBuffer commit]) I only get a pink screen. I've tried everything I can think of: making sure the pixel formats are the same for the back buffer as my render targets, etc. But it's still pink. Could you point me in the right direction so I can fix this, or help describe why it's pink. That would be really helpful. Thank you, Brian Hapgood

Hi I have attempted to find a fix for my issue via documentation online and one phone support ( not code level support ) call to no end. I could continue to try various things but would like to see if someone else has encountered this issue and a fix for it. Background: My Game app is live on App Store and has 1 classic leaderboard . I am now getting ready to submit an update to the app and it also entails adding a new recurring leaderboard. I added the leaderboard in App Store. I however have NOT uploaded my new build yet. I have also not added my leaderboards ( currently live and not live ) to any set. When I try to submit scores using GKLeaderboard.submitScore(_:context:player:leaderboardIDs:completionHandler:) to the new non-live leaderboard it works ( gives me no error ) When I try to load the scores from the new non-live leaderboard GKLeaderboard.loadLeaderboards(IDs:completionHandler:) loadEntries(for:timeScope:range:completionHandler:) it fails. Error: "leaderboardID not found" I could try ( and will ) uploading the new build to AppStore connect and associating the new leaderboard to it before testing again. try associating each leaderboard to a set Is there anything else that I should be aware of ? Thanks in advance

Hi, I’m using the latest iPad Pro (13-inch) and I can see that Metal offers an rgb10a2unorm texture for rendering, but when I render a grey ramp and measure the actual luminance, I get a pattern that I would expect from an 8-bit texture (see below). Before I start ripping apart all my code, is there anything else I need to do to convince iOS to render my texture in 10-bit? I already tried setting the PixelFormat in my CMetalLayer to rgb10a2unorm, but that didn’t change anything.

Had anyone experienced convexCast causing a crash and what might be behind it? Here's the call stack: