Enrol Supervised iOS device. Push an CardDAV policy for the above device, the contacts gets synced in the native Contacts app as expected. (https://developer.apple.com/documentation/devicemanagement/carddav) When the above same profile is re-installed in the above device, the synced contacts are lost and password prompt is shown to enter the password - even though the installed profile contains password for the CardDAV policy. Password prompt from the device Re-Installed configuration <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>PayloadVersion</key> <integer>1</integer> <key>PayloadUUID</key> <string>35ee541b-fec0-46b0-bd48-bcc0702ab60b</string> <key>PayloadType</key> <string>Configuration</string> <key>PayloadOrganization</key> <string>MDM</string> <key>PayloadIdentifier</key> <string>com.mdm.ec89620f-2905-4c14-b09d-7e9f17944468.CardDAV</string> <key>PayloadDisplayName</key> <string>CardDAV</string> <key>PayloadRemovalDisallowed</key> <true/> <key>PayloadContent</key> <array> <dict> <key>PayloadVersion</key> <integer>1</integer> <key>PayloadUUID</key> <string>07c423b5-8ae2-4e6e-9336-aa9ca850d6c9</string> <key>PayloadType</key> <string>com.apple.carddav.account</string> <key>PayloadOrganization</key> <string>MDM</string> <key>PayloadIdentifier</key> <string>07cV423b5-8ae2-4e6e-9336-aa9ca850d6c9</string> <key>PayloadDisplayName</key> <string>CardDAV Policy</string> <key>CardDAVAccountDescription</key> <string>****</string> <key>CardDAVHostName</key> <string>www.googleapis.com</string> <key>CardDAVPassword</key> <string>****</string> <key>CardDAVPort</key> <integer>443</integer> <key>CardDAVPrincipalURL</key> <string></string> <key>CardDAVUseSSL</key> <true/> <key>CardDAVUsername</key> <string>****</string> </dict> </array> </dict> </plist> Feedback ID : FB14250521

Enrol Supervised iOS device Turn ON screen time restriction by opening Settings app -> Content & Privacy restrictions -> Passcode & Face ID -> Don’t Allow. Now install a Passcode policy profile via MDM with the key “forcePIN” set to “true”, such that the device is needed to change the passcode in device. By following above steps, the profile fails. The failure response from the device states that passcode restriction is applied in the device, “The profile ‘Profilename’ may require a passcode change but the passcode cannot be modified.” This is an incorrect behaviour as MDM should have more control over the screen-time restriction as well. Error response from the device <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>CommandUUID</key> <string>InstallProfile</string> <key>ErrorChain</key> <array> <dict> <key>ErrorCode</key> <integer>4001</integer> <key>ErrorDomain</key> <string>MCInstallationErrorDomain</string> <key>LocalizedDescription</key> <string>Profile Installation Failed</string> <key>USEnglishDescription</key> <string>Profile Installation Failed</string> </dict> <dict> <key>ErrorCode</key> <integer>4026</integer> <key>ErrorDomain</key> <string>MCInstallationErrorDomain</string> <key>LocalizedDescription</key> <string>The profile **** may require a passcode change but the passcode cannot be modified.</string> <key>USEnglishDescription</key> <string>The profile **** may require a passcode change but the passcode cannot be modified.</string> </dict> </array> <key>Status</key> <string>Error</string> <key>UDID</key> <string>****</string> </dict> </plist> Feedback ID : FB14249704

Enroll an iOS device via MDM and apply passcode policy with "maxFailedAttempts" setting enabled https://developer.apple.com/documentation/devicemanagement/passcode Now when the user attempts to unlock device exceeds above "maxFailedAttempts" - the device gets wiped. Now the administrator is unaware of this event. It would be helpful to get an message/DDM status from device to notify the MDM server that device is wiped due to incorrect passcode attempts.

In the case of organizational iPad devices, we need to have them in a more organized way via the homescreenlayout payload. We need to control the dock and the app library. We will be allowing certain apps on the device via allowListedAppBundleIDs, so we want to disable the recent apps in the dock and prevent apps from being duplicated in the app library, including recent apps and Siri suggestions. If there are more options to control the complete screen layout on the device, it would be helpful.

https://developer.apple.com/documentation/devicemanagement/systempreferences The Above documentation of "System Preferences" says deprecated. I assume that some of the panes are not working in latest OS due to this deprecation. My query is , Is there any other alternative to Disable or Enabled Preference Panes which was attained by SystemPreferences Payload. I couldn't find any. Is it entirely stopped and in latest OS's ,it wont allowed to restrict those panes?

Hi, We have our devices listed in Apple Business Manager but they are not enrolled in MDM. Some of the devices are locked in Activation Lock screen as employees logged in with their personal account . Since devices are company owned and already available in ABM is there any way to remove activation lock easily without providing proof of purchase to apple? In order to prevent devices getting into activation lock in future the only way is to Enroll the device in a MDM? Are there anyways to bypass activation lock if we are not using MDM

In older versions of macOS, such as those predating Mac OS Sonoma, users had the ability to set the Lock Screen independently from their desktop wallpaper. However, with the introduction of Mac OS Sonoma, this feature seems to have been altered or removed altogether. Currently, there appears to be no option to set the Lock Screen image separately; instead, only changing the desktop wallpaper, changes the Lock Screen image. This change raises questions about whether it is a deliberate alteration in the setting flow or if it could potentially be a bug in the system. Users may wonder if this adjustment is intended to streamline the interface or if there are plans to reintroduce the ability to customize the Lock Screen image independently of the wallpaper in future updates.

Hi all , We are planning to manage about 1 Million+ Apple devices of inclusive of both iPhone and Mac devices under a AxM Account. However while adding VPP Licenses for an App i'm prompted with below error: " You cannot order more than 100000 copies of same the free item per week" While our goal is to manage 1 Million devices under same Location token , i have below questions in mind 1 . What is the upper limit of number of Licenses that can be added per app in a Location token? Currently it says 1 Lakh Licenses per app per week . Wanted to know if there is any limit on this count as it shouldn't surprise us in upcoming weeks. 2 . How many Locations can be created in a AxM Account? Currently we created about 15 location to see if there are any limit but so far couldn't find any limit on number of locations that can be created. This limit could help us plan our deployment in advance 3 . What is the total number of licenses a VPP Location token can hold ? As we manage 1 Million Devices for 12 Apps , 1 Million x 12= 12 Million licenses would be transacted in this location token by our MDM Solution , is this okay or will there be any limitations in this count

I have tried to deploy passwordpolicy script using pwpolicy pwpolicy -n /Local/Default -setglobalpolicy "usingHistory=5 canModifyPasswordforSelf=1 maxMinutesUntilChangePassword=129600 requiresAlpha=1 requiresNumeric=1 minChars=8 passwordCannotBeName=1 requiresMixedCase=1 requiresSymbol=1" sudo defaults write /Library/Preferences/com.apple.loginwindow PasswordExpirationDays 14 errcode=$? if [ "$errcode" -ne 0 ]; then echo "" echo "Failed to apply with errorcode $errcode" 1>&2 echo "" exit 1 fi echo "Password Policy applied successfully" 1>&2 After deploying, on next login, It prompted for login, On entering password, It shows wrong password. When I tried to reset the password, It is not accepting the password. Instead It prompts again and again. Like this , I have got 300 mac machines struck in login page. I tried to run these two commands via a app running in root pwpolicy -u "$user" -clearaccountpolicies pwpolicy -clearaccountpolicies After Running this, I can able to loggin for first time. When tried to login second or successive times, It is failing with wrong password or sometimes no error instead of a jumping prompt in password page. When tried to change password after a login after clearpolicy command, It is not accepting the admin's password (Which was used to login the current session). Please help on this issue. As it does have a serious impact.

https://developer.apple.com/documentation/managedappdistribution https://developer.apple.com/documentation/appdistribution/fetching-and-displaying-managed-apps We have tested the above apple documentation regarding Managed Application Distribution . To Note : We are trying to provide a custom AppStore in our MDM App for Managed Apps. We have done all the steps mentioned in the documentation Got Entitlement and enabled for the app. Used the Exact code in a new swift UI Project Attaching Screenshots for the compile time error , i get First Screenshot , shows an error when building the project with a physical device(iOS 17.4). Seconds one , shows different error when building with a simulator. I have checked all the apple documentations and wwdc videos for further clue on this. But no help ! It will be helpful, if anyone help me with exact working model for this framework.

Hi Team, We have Apple's OS Update for Mac machines in our fleet . Where some Macs are Silicon previously at 14.2.1 and we updating them to 14.3 using Command ScheduleOSUpdate with InstallAction key set to Default. We also have set restriction set with keys forceDelayedSoftwareUpdates set to true and enforcedSoftwareUpdateDelay set to 1 For Updating at earliest. FYI, These machines already have FileVault Encrypted with them and also has Admin User After Restart We can see that the device automatically boots to Recovery Mode asking for a "Recovery Key" to continue , Even When we have given the personal recovery key (or) Trying to unlock the disk using Admin user's Credential in Startup Disk Things not working. FYI , The machine have asked for BootStrap Token After ScheduleOSUpdate Command And MDM have given them in Response Can We please know where there is a issue and why this behaviour is occurring

https://developer.apple.com/documentation/managedappdistribution As stated in the above documentation, to use this framework, App should be enabled the following entitlement . The Managed App Installation UI entitlement is required to use this framework. But in developer portal it is not found .Is there any other requirements Apple will expect in order to use this entitlement.? Any help will be appreciated.

I'm encountering challenges deploying two unlisted applications via MDM to an iOS 17.2 device. The first app successfully installed after presenting a user prompt upon distribution <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>CommandUUID</key> <string>InstallApplication</string> <key>Command</key> <dict> <key>RequestType</key> <string>InstallApplication</string> <key>iTunesStoreID</key> <integer>**********</integer> <key>InstallAsManaged</key> <true/> <key>ManagementFlags</key> <integer>5</integer> <key>ChangeManagementState</key> <string>Managed</string> </dict> </dict> </plist> Device Response for first app :- <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>CommandUUID</key> <string>InstallApplication</string> <key>Identifier</key> <string>*********************</string> <key>State</key> <string>Prompting</string> <key>Status</key> <string>Acknowledged</string> <key>UDID</key> <string>XXXXXXXXXXXX</string> </dict> </plist> However, deploying the second app resulted in an error message from the device. <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>CommandUUID</key> <string>InstallApplication</string> <key>Command</key> <dict> <key>RequestType</key> <string>InstallApplication</string> <key>iTunesStoreID</key> <integer>**********</integer> <key>InstallAsManaged</key> <true/> <key>ManagementFlags</key> <integer>5</integer> <key>ChangeManagementState</key> <string>Managed</string> </dict> </dict> </plist> Device Response for second app :- <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>CommandUUID</key> <string>InstallApplication</string> <key>ErrorChain</key> <array> <dict> <key>ErrorCode</key> <integer>9610</integer> <key>ErrorDomain</key> <string>ASDServerErrorDomain</string> <key>LocalizedDescription</key> <string>License not found.</string> </dict> </array> <key>RejectionReason</key> <string>NotSupported</string> <key>Status</key> <string>Error</string> <key>UDID</key> <string>XXXXXXXXXXX</string> </dict> </plist> Can you confirm the iOS Devices support deployment of Unlisted apps without VPP app assignment ?

The specific pdf when opened in an macOS or web orA Adobe iOS App, it shows the highlighted texts as expected But when opened through any IOS app (except the adobe app) or our native app using pdfkit , the highlights are gone . It disappeared Even the pdf when opened in files app has this issue. Don’t know what’s the problem with the iOS. I have attached the screenshot for the pdf when opened in mac versus the pdf opened in any iOS app. **PDF when opened via Adobe App, ** Pdf when opened via our native app, Raised a feedback regarding this unexpected behaviour . FB Id - FB13326307 Do anyone faced the same issue? Anything am i missing regarding this>

Our goal is to fetch Battery Health Capacity Percentage through an swift App or through any Mobile device Management Protocol. I can surf through internet and can find only there is an api to fetch the battery level from the iOS/iPadOS devices. Is there any way to fetch the battery health. Eventhough there are plenty of apple forums regarding this problem, Still we cant able to find any possible way to do it. https://developer.apple.com/forums/thread/693614 - With respect to Apple's Reply in this thread, We have raised an Enhancement Request with Feedback Id : FB13322108 on this context. We request you to have a look on it, as most of them are waiting for a solution.