I have a custom object which gets passed back to the main app from XPC. I whitelist it like so: NSSet *expectedClass = [NSSet setWithObjects:[NSArray class], [MyCustomClass class], nil]; [interface setClasses:expectedClass forSelector:@selector(myMethodNameHere:withCompletion:) argumentIndex:0 ofReply:YES]; Now my custom class conforms to NSSecureCoding. It does have an array property of another custom class. @property (nonatomic,readonly) NSArray *arraypropertyOfOtherClass; Which is decoded in -initWithCoder: using: -decodeArrayOfObjectsOfClasses:forKey: Now on macOS Tahoe this is all walking fine. But I just tested on macOS Monterey and I get the following error: Exception: decodeObjectForKey: too many nested collections when explicitly decoding a single collection. How should I handle this for earlier versions of macOS?

Getting this crash after I do this in PDFKit a lot: PDFSelection *nextSelect = [self.pdfView.document findString:currentSearchString fromSelection:currentSelction withOptions:NSCaseInsensitiveSearch]; if (nextSelect != nil) { self.pdfView.currentSelection = nextSelect; [self.pdfView scrollSelectionToVisible:nil]; } Which often leads to: 0 CoreFoundation 0x000000019ced4770 __exceptionPreprocess + 176 1 libobjc.A.dylib 0x000000019c9b2418 objc_exception_throw + 88 2 CoreFoundation 0x000000019cfffe10 -[__NSPlaceholderDictionary initWithObjects:forKeys:count:] + 724 3 CoreFoundation 0x000000019cfa1ae4 +[NSDictionary dictionaryWithObjects:forKeys:count:] + 52 4 PDFKit 0x00000001cb56e0fc -[PDFView _axPostPageChangeNotification:] + 348 5 Foundation 0x000000019e6a25e4 __NSFireDelayedPerform + 372 6 CoreFoundation 0x000000019ce92290 __CFRUNLOOP_IS_CALLING_OUT_TO_A_TIMER_CALLBACK_FUNCTION__ + 32 7 CoreFoundation 0x000000019ce91f50 __CFRunLoopDoTimer +

Looking to update one of my apps that uses SKStoreReviewController +requestReview (deprecated) to AppStore.requestReview(in:) umm...I have a few of questions... Why is an NSViewController parameter required? It's really not so uncommon for an AppKit app to just use NSWindowController with a window that does not use NSViewController... It should be possible to present the review request in a standalone alert (attached to a window is preferred IMO but it still should be possible to ask in separate window). 3)...why Swift..(err nevermind) Ideally: AppStore requestReview should take a NSWindow parameter but that parameter should be optional. If nil the request should be presented in a standalone window (like an alert). If non nil..present as a sheet on the window. Why a view controller? Maybe I'm missing something.

I have an NSBrowser inside a window. When I start resizing a column I noticed a peculiar behavior: it causes NSWindowWillStartLiveResizeNotification to get posted for the NSWindow the browser is inside (and did end gets posted when column resizing finishes). The browser is not the NSWindow contentView but a descendant of the contentView. I have my reasons for caring (I'm currently listening for these window resize notifications) but my code naively assumes that NSWindowWillStartLiveResizeNotification - NSWindowDidEndLiveResizeNotification indicates a window resizing session, not a column resizing session for the NSBrowser. This is in contrast to NSOutlineView. When resizing columns in NSOutlineView the window resize notifications do not get posted. NSBrowser deliberately kicks it off: -[NSWindow _startLiveResize]; -[NSBrowser _resizeColumn:withEvent:] () So this seems quite intentional but is it necessary in modern macOS? Should I file a bug? I already did FB20298148

I have some buttons. I set the bezelStyle to NSBezelStyleGlass. I'm sometimes experiencing the following issue: Put the system in dark mode. Some glass buttons still draw with the light appearance. One or more of the following actions usually makes the appearance redraw proper: -Clicking the button -Deactivating and then reactivating the window. -Close and then reopen the window. I tried setNeedsDisplay YES etc. but that didn't work The delay is quite noticeable. Everything else is in dark mode except one or two glass buttons. This seems to workaround the issue: BOOL didToggleGlass = NO; if (self.bezelStyle == NSBezelStyleGlass) { // Turn glass off just for a sec. self.bezelStyle = NSBezelStyleToolbar; didToggleGlass = YES; } if (didToggleGlass) { // Put glass back on. self.bezelStyle = NSBezelStyleGlass; } Apparently toggling glass cause the effective appearance to change so you can't use the above workaround in a -viewDidChangeEffectiveAppearance b/c you'll create an infinite loop unless you guard against it.

I'm noticing some weird glitches with my collection view headers on macOS Tahoe. The sections headers are pinned to the visible region. I headers fade out when scrolling and are supposed to fade back in but sometimes they don't fade back in and the header remains but the header text doesn't come back (until I scroll again). How can I turn off this scroll animation thingy?

If I try making a bitmap of a NSButton using the following code: NSBitmapImageRep *rep = [button bitmapImageRepForCachingDisplayInRect:button.bounds]; [button cacheDisplayInRect:button.bounds toBitmapImageRep:rep]; NSData *tiffData = rep.TIFFRepresentation; I get a blank image if the NSButton has its bezelStyle set to NSBezelStyleGlass. If I change the bezel style to something else like NSBezelStyleFlexiblePush I do get an image

Previously I was able to "snapshot" view that were not part of any window hierarchy using the following: NSImage *buttonImage = [NSImage imageWithSystemSymbolName:@"49.circle.fill" accessibilityDescription:nil]; NSButton *aButton = [NSButton buttonWithImage:buttonImage target:nil action:nil]; [aButton sizeToFit]; NSBitmapImageRep *rep = [aButton bitmapImageRepForCachingDisplayInRect:aButton.bounds]; if (rep == nil) { NSLog(@"Failed to get bitmap image rep."); return; } [aButton cacheDisplayInRect:aButton.bounds toBitmapImageRep:rep]; NSData *tiffData = rep.TIFFRepresentation; NSImage *snapShotOfImage = [[NSImage alloc]initWithData:tiffData]; Now on macOS Tahoe I get a non nil image, but the image is blank. However if I add aButton NSWindow's view hiearchy just before the call to -cacheDisplayInRect:toBitmapImageRep: I do get a proper image. Is this behavior intended or is this considered a bug? Is it documented anywhere that a view must be in a NSWindow for -cacheDisplayInRect:toBitmapImageRep: to work? Thanks

I have an NSWindow that isn't entirely opaque. When presenting a sheet AppKit overlays the window with NSSheetEffectDimmingView. The problem is the entire window frame is used so NSSheetEffectDimmingView overlays the transparent areas of the window and it looks bad. Is there a clean way to inset NSSheetEffectDimmingView or even perhaps disable this behavior completely so I can draw my own? I'm looking for a clean solution (other than modifying the view hierarchy of NSNextStepFrame) or swizzles which I might have to resort to if there is no other way.

I just boxed up AppTransaction API. In the debug environment it appears to always return a VerificationResult that is .verified Unlike Storekit1 calling AppTransaction.shared does not seem to cause a sandbox receipt to actually get written on the app bundle in Derived data. I was trying to purposefully mess with the receipt in order to get AppTransaction to fail so I can test how my app behaves when errors occur but there is no receipt to mess with. I tried using the old exit(173) API and it does cause a receipt to be fetched but that seems to be completely ignored by AppTransaction, it validates even if you trash or tamper with the receipt given by exit(173). Is there a good way to test receipt validation failure using the high level Storekit2 API?

My framework has private Objective-C API that is only used within the framework. It should not be exposed in the public interface (so it shouldn't be imported in the umbrella header). To expose this API to Swift that's within the framework only the documentation seems to indicate that this needs to be imported in the umbrella header? Import Code Within a Framework Target To use the Objective-C declarations in files in the same framework target as your Swift code, configure an umbrella header as follows: 1.Under Build Settings, in Packaging, make sure the Defines Module setting for the framework target is set to Yes. 2.In the umbrella header, import every Objective-C header you want to expose to Swift. Swift sees every header you expose publicly in your umbrella header. The contents of the Objective-C files in that framework are automatically available from any Swift file within that framework target, with no import statements. Use classes and other declarations from your Objective-C code with the same Swift syntax you use for system classes. I would imagine that there must be a way to do this?

If I do this: NSString *name = @"Jim"; NSMenuItem *menuItem = [[NSMenuItem alloc]init]; // Analyze does show localization warning when format string is used. menuItem.title = [NSString stringWithFormat:@"Hello %@",name]; I expect to get the following warning: User-facing text should use localized string macro But I don't. However if I do this: menuItem.title = @"What"; I do get the warning about localization as expected and as desired when I run Analyze. Is this considered a bug? Thanks!

I have an outside Mac App Store app. It has an action extension. I can't get it to run from Xcode. I try to debug it from Safari. It shows up in the menu when I click the 'rollover' button but it doesn't show up in the UI at all. Xcode doesn't give me any indication as to what the problem is. I see this logs out in console when I try to open the action extension: Prompting policy for hardened runtime; service: kTCCServiceAppleEvents requires entitlement com.apple.security.automation.apple-events but it is missing for accessing={TCCDProcess: identifier=BundleIdForActionExtHere, pid=6650, auid=501, euid=501, binary_path=/Applications/AppNamehere.app/Contents/PlugIns/ActionExtension.appex/Contents/MacOS/ActionExtension}, requesting={TCCDProcess: identifier=com.apple.appleeventsd, pid=550, auid=55, euid=55, binary_path=/System/Library/CoreServices/appleeventsd}, I don't see why the Action extension needs Apple events but I added it to the entitlements anyway but it doesn't seem to matter. The action extension fails to open.

So I just updated Xcode to 16.3 and updated a project to its recommended build settings which includes "Register App Groups". So I have an outside Mac App Store app that uses app groups. Here we have an action extension. I can't debug it, can't get it to run. Nothing useful in Xcode is displayed when I try... but it looks like a code signing issue when I run and have Console open. So I try to make a provisioning profile manually and set it...didn't work. I noticed now though in signing & capabilities the group id is in red...like it's invalid, or something? This was a "macOS styled" group without the "group." prefix. So am I supposed to switch it to have the group. prefix? It makes the red text go away (no warnings or anything about app groups here, just red text). So if I change it to group. prefix..does that make an entire new container?What happens on app update for installs that don't have group. prefix? Does the system transparently migrate the group? Or Am I supposed to migrate the entire group container to the identifier with group. prefix? Also how does this affect running on older version of macOS? If I go with the "group." prefix to make the red text go away,.. what happens on macOS 11.0? Got a little more than I bargained for here after midnight.

Say I want to sync a toggle in my app with SMAppService's .status property. If the status changes from my app I can track it. But if user toggles it from System Settings, I don't see a notification so then the UI in my app is out of date. The status property is not key value observable and there doesn't appear to be a SMAppServiceStatusDidChangeNotification ? I can re-read it every time my app will become active but feels kind of wrong to do it this way.