Hi, I have a .NET MAUI app which I've added subscriptions to using the Plugin.InAppBilling nuget package. When I tested on TestFlight I got an almost immediate crash. After doing some research I followed advice to add an Entitlements.plist file to Platforms > iOS with the following entry: com.apple.developer.in-app-purchase The distribution provisioning profile I'm using to sign my app has the App ID set to an Identifier which has "In-App Purchase" ticked, but greyed out in it's "Capabilities" section on https://developer.apple.com/. I'm not sure why it's ticked and greyed out, but I assume that means that "In-App Purchase" is enabled. The app runs file locally but when I create an IPA file and add it to Transporter for upload to App Store Connect I get the following error: "Validation failed (409) Invalid Code Signing Entitlements. Your application bundle's signature contains code signing entitlements that are not supported on iOS. Specifically, key 'com.apple.developer.in-app-purchase' in 'Payload/[Removed].app/[Removed]' is not supported. (ID: [Removed])". Here is the structure of my csproj code for creating a IPA file for iOS: The command I use: dotnet publish [Removed]/app.csproj -f:net9.0-ios -c:Release ^ /p:PlatformTarget=Arm64 ^ /p:RuntimeIdentifier=ios-arm64 ^ /p:ServerAddress=[Removed] ^ /p:ServerUser=[Removed] ^ /p:ServerPassword=[Removed] ^ /p:ArchiveOnBuild=true ^ /p:BuildIpa=true I'm stuck trying to figure this out. If you could please point out any issues with what I'm doing or if you have any suggestions to resolve the problem I would very much appreciate it. Thanks, Ben

Hello everyone, I'm hoping to find a solution for a critical issue that is blocking my app's submission to the App Store. My app uses the Screen Time API and therefore has a main app and a DeviceActivityMonitor extension. The main app has been successfully granted the Family Controls (Distribution) entitlement. However, the DeviceActivityMonitor extension is stuck with only the Family Controls (Development) entitlement. This mismatch causes my build to fail during the archive/distribution process with the error: "Provisioning profile failed qualification. Profile doesn't support Family Controls (Development)." This is a hard blocker, as the extension is a mandatory part of the API. I have already filled out the entitlement request form and also contacted Developer Support (Case #102666581576), who confirmed they could not assist and directed me here. My question is: What is the correct procedure to escalate or resolve the issue of a required extension not receiving the distribution-level Family Controls entitlement after the main app has already been approved? Has anyone else encountered this specific "Development" vs. "Distribution" mismatch and found a definitive way to resolve it? Any guidance would be greatly appreciated. Thank you!

Hi Apple Developer Community, I'm experiencing an issue with Family Controls entitlements for my iOS app that I'd like to discuss and see if others have encountered similar problems. Background: My app (BrightStart) uses Family Controls to help users build healthy morning routines by temporarily blocking distracting apps until they complete a sunlight exposure session. The core functionality relies on automatic time-based blocking (e.g., block social media apps from 6-8am daily). The Problem: I have Family Controls working perfectly in development builds, but I'm blocked from distributing via TestFlight due to entitlement issues with my Device Activity Monitor extension. Technical Details: Main app bundle ID: app.brightstart.app ✅ Has both "Family Controls (Development)" and "Family Controls (Distribution)" options available Extension bundle ID: app.brightstart.app.BrightStartMonitorExtension ❌ Only shows "Family Controls (Development)" - no Distribution option Error when archiving for TestFlight: ❌ Provisioning profile failed qualification Profile doesn't support Family Controls (Development). Family Controls (Development) feature is for development only. Please use Family Controls (Distribution) for distribution. Impact: Cannot upload to TestFlight for beta testing Native FamilyActivityPicker falls back to mock UI in distributed builds Automatic scheduled app blocking (via DeviceActivityMonitor) doesn't function in production Questions for the community: Has anyone successfully gotten "Family Controls (Distribution)" enabled for a Device Activity Monitor extension? Is this a known limitation, or should I expect this option to be available? Are there alternative approaches for time-based automatic app blocking that work in distribution builds? Should I contact Apple Support directly about enabling this entitlement for the extension? Btw, Cursor wrote this summary above, so it could be just hallucinating the issue? Would really appreciate anyone's thoughts here.

Good afternoon, Our team is currently developing a mobile application that includes video call functionality, and we are seeking the optimal approach to enable incoming calls on iOS devices. Ideally, we would like calls to be delivered even when the app is completely closed or after the device is restarted. As I understand it, this may require obtaining VoIP permissions; otherwise, calls may only work when the app is open or running in the background. I would appreciate it if you could confirm my understanding and advise me on the steps or requirements for obtaining the appropriate permissions. Currently, when I try to launch the app in XCode, I see an error (screenshot).

Hi All, Like many others I'm a little confused with gaining access to the family controls capability. Our app is ready to push to testflight, and we sent the request to apple last week. However only learning today that we need to request for the shield extension as well. I wanted to ask what the expected timeline is for being approved? I've seen posts here saying less than a week, and some people having to wait longer than 6 weeks. Any advise or guidance on getting approved smoothly & swiftly would be highly appreciated

Hello Apple support, A few days ago, I received an e-mail granting the entitlement for Critical Alerts to my app VIAWEB Mobile, bundle ID br.com.viawebsystem.VIAWEBservice . This was my second attempt: in the first time I requested the entitlement for all our apps, but it was denied. This time I requested for just our main app, and now it was approved. I have just followed several tutorials and instructions available on the Internet, but I couldn't enable this capability in my app. What I tried and where I stopped: In my Xcode 16.4, target "VIAWEB Mobile", Signing & Capabilities, All: unchecked the Automatic manage signing and checked again, selected the correct Team. In the iOS section, Xcode Managed Profile, click in the little "i" and there is no Critical Alerts in the Capabilities list, nor com.apple.developer.usernotifications.critical-alerts in the Entitlements list. And so, there is no Critical Alerts in the "+ Capability" window. If I go to Certificates, Identifiers & Profiles, Identifiers, and click to edit my App ID Configuration, there is no Critical Alerts to enable in the Capabilities list. In Capability Requests, I just see the plus sign next to Critical Alerts (to make an additional request), and the status Approved when I click on View Requests (2). Can you provide me with updated instructions on how I can enable this entitlement for my app? Thank you! Best regards, The VIAWEB Developer Team.

I'm trying to help out one of our vendors by building a skeleton PCI dext which they can flesh out. However, I can't seem to get the signing right. I can't sign it at all using no team or my personal team. "Signing for requires a development team", and "Personal development teams ... do not support the System Extension capability". I can't sign the driver because "DriverKit Team Provisioning Profile: doesn't match the entitlements file's value for the com.apple.developer.driverkit.transport.pci entitlement. I think this problem occurs because our company has already been assigned a transport.pci entitlement, but for our own PCI vendor ID. But I want to build and test software that works with our vendor's PCI device. I tried generating a profile for the driver manually, it contained only our own company's PCI driver match: IOPCIPrimaryMatch = "0x0000MMMM&0x0000FFFF"; where MMMM is our own PCI vendor ID. Is there a better way to inspect the profile Xcode is using than the postage-stamped sized info popup which truncates the information? I would download the generated profile but it doesn't appear on the profile, but Xcode is accessing it from somewhere. When I look at the available capabilities I can add to an app identifier on the Developer portal, I see com.apple.developer.driverkit.transport.usb, which is "development only". There's no "development only" capability for PCI. Does this mean it isn't possible to develop even a proof-of-concept PCI driver without being first granted the DriverKit PCI (Primary Match) entitlement? When adding capabilities to a driver, the list of available capabilities shown in Xcode has one "DriverKit PCI (Primary Match) entry", but if I double click it, two such entries appear in the Signing and Capabilities tab for my driver target. On the Developer portal, when I look at my driver's Identifier, there are two Capabilities labelled DriverKit PCI (Primary Match). Why?

I have an app that runs as a status bar app, mostly. I have set the following in the info.plist file for the app: <key>Application is agent (UIElement)</key> <true/> However, I get a compile error: Provisioning profile Mac Team Provisioning Profile: yout.Drive doesn't include the Application is agent (UIElement) entitlement. Checking the entitlements, I do not see this entitlement anywhere. Where and how do I set this?

Hello, Unable to see the App Sandbox entitlement while creating a new App ID. Have tried to recreate APP ID multiple times. Don't see the option in Developer portal.

We've been trying to get the CarPlay Navigation Entitlement for a couple years now without much luck. Did you have a similar experience? How did you succeed getting the entitlement? Part of the form requires us to submit Screenshots. Did you provide screenshots of your on-device experience or wireframe for CarPlay? How was your experience?

Hi everyone, I'm working with a third party to integrate their USB driver into our app and I'm wondering if iPadOS supports bundling a prebuilt .systemextension file with the entitlement com.apple.developer.system-extension.redistributable into our app that has the com.apple.developer.driverkit.communicates-with-drivers entitlement? If not, is there a way to bundle a third party USB driver into our iPad app?

Hello community, I'm new here, so please excuse my blunt question. I'm trying to understand how everything works and the logic behind it. I have an idea for an app which requires the FamilyControl entitlement. Now I am not sure if the idea even works, so I wanted to test it on my own device. Am I correct, that I cannot even test an App with such entitlements without paying for the ADP? Not even on my own device? I completely understand I need to be a member in the ADP if I want to distribute my app, but I'm not there, yet, and I just want to do a proof-of-concept. I thought I can't be the first one with that question, but couldn't find a past topic on this, so I'm posting it. Regards, Niklas

Two months ago we got approval for using the Notification Filtering entitlement. We rushed out to implement it in our app, only to find out that the permission was set for the wrong bundle identifier. We expected to get the permission for the notification extension's bundle identifier, yet it is added for the main app's bundle identifier. Per the official docs, the entitlement permission should be in the notification service extension target: After you receive permission to use the entitlement, add com.apple.developer.usernotifications.filtering to the entitlements file in the Notification Service Extension target. However, this fails to get signed when compiling for non-simulator targets because of the bundle mismatch issue. Simulator perfectly filters notifications. Adding the entitlement to the main app does compile, but filtering does not work (as expected). We reached out to Apple twice (Case-ID: 14330583) but we have yet to receive any response. Could there be something else wrong instead of the identifier mismatch?

Hello everyone, I'm hoping to get some guidance on a frustrating codesigning issue. I have a macOS application that successfully completes the entire notarization and stapling process, but it is still rejected by Gatekeeper during the final verification step. The rejection only happens when I apply the entitlements that I believe are necessary for my app's functionality. The application is built with PyInstaller and has the following components: A main executable written in Python. A bundled Tcl/Tk instance for the GUI. Embedded Playwright components, which include the Node.js runtime and a full Chromium browser instance. These are located deep inside the .app bundle. The Problem The core of my application relies on Playwright to perform some automated tasks, and its bundled Chromium browser requires specific entitlements to function under the Hardened Runtime. Specifically, it needs com.apple.security.cs.allow-jit and com.apple.security.cs.allow-unsigned-executable-memory. My signing process is as follows: Prepare Entitlements: I use two separate .plist files: main_app_entitlements.plist: This is for the main Python executable and only contains com.apple.security.cs.allow-jit. jit_helper_entitlements.plist: This is for the node and Chromium Helper executables within the Playwright framework. It contains both com.apple.security.cs.allow-jit and com.apple.security.cs.allow-unsigned-executable-memory. Inside-Out Signing: I perform a deep signing process. I find all binaries, dylibs, and frameworks, sort them by path length (deepest first), and sign each one individually with the appropriate entitlements. The main .app bundle is signed last. Notarization: I zip the .app bundle and submit it using xcrun notarytool submit --wait. The tool reports a successful notarization every time. Stapling: I use xcrun stapler staple on the .app bundle, and it confirms that the ticket was successfully stapled. The point of failure The final step is to verify the result with spctl: spctl --assess --type execute --verbose --ignore-cache "MyApp.app" This is where it fails. The output is: MyApp.app: rejected source=Unnotarized Developer ID This "Unnotarized Developer ID" message is confusing because xcrun notarytool and stapler both report complete success. The crucial detail If I run the entire process without any entitlements—just signing with the Hardened Runtime enabled—the final spctl assessment passes. However, the application then crashes at runtime as soon as it tries to use Playwright, which is expected since the browser helpers are missing their required JIT entitlements. My question Is there a known issue where using com.apple.security.cs.allow-jit or com.apple.security.cs.allow-unsigned-executable-memory on nested helper executables can invalidate an otherwise successful notarization? Is my strategy of applying different, granular entitlements to different executables within the same app bundle correct? Could the issue be related to how or when these entitlements are applied during an "inside-out" signing process? Is there a better way to structure the signing of these complex components? I'm confident the notarization itself is working, but it seems Gatekeeper's local assessment is stricter and is being tripped up by my entitlement configuration. Thank you in advance for any help or suggestions you can provide

Hi I am building obs studio using cmake and Xcode. I used cmake --preset macos -DOBS_CODESIGN_IDENTITY="" to generate the build folder and inside X code used Provisioning Profile with Developer ID Application certification. The build was generated successfully but when I tried to turn on the virtual camera I see missing Missing entitlement com.apple.developer.system-extension.install error. (My Provisioning profile has System Extension Capability checked on apple developer portal) If I use this flow instead: cmake --preset macos -DOBS_CODESIGN_TEAM=63B5A5WDNG Build using Xcode with Automatic manage signing with Apple Developer Certificate. Obs studio builds successfully and Virtual camera extension also works fine. My primary goal is to notarise my app which contains OBS studio and Blackhole Audio driver for distribution outside app store. If I try to sign my obs app generated in second step codesign --deep --force --timestamp --verify --verbose \ --options runtime --sign "Developer ID Application:***" "OBS.app" The obs app fails to launch due to some errors. Can anyone please guide me which step I might be doing wrong, Much Appreciated. Thanks

Hello Everyone, I am currently building an app using React Native with Swift bridging, integrating VoIP functionality using Twilio, PushKit, and CallKit. I am encountering the following issue during development: "The current provisioning profile doesn't include the com.apple.developer.voip-push-notification entitlement." What I’ve Done So Far: VoIP Certificate: I have created a valid VoIP Services certificate in the Apple Developer portal. Bundle Identifier and Provisioning Profile: A new Bundle ID was created specifically for this app. I created a provisioning profile for this Bundle ID and downloaded it for use in Xcode. Xcode Capabilities Push Notifications: Enabled Background Modes: Voice over IP: Enabled, Remote notifications: Enabled Entitlements File I have an entitlements file named VoiceCallDemoProjectRelease.entitlements with the following content: <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>aps-environment</key> <string>development</string> <key>com.apple.developer.voip-push-notification</key> <true/> </dict> </plist> This entitlements file is properly linked in the project’s build settings. Project Setup I have integrated PushKit for VoIP push handling and CallKit for incoming call UI and control. Problem: In the Apple Developer portal under my App ID settings, I only see an option to enable Push Notifications. There is no option available to enable Voice over IP, and therefore the provisioning profile generated does not include the com.apple.developer.voip-push-notification entitlement. Despite enabling VoIP background mode in Xcode, adding the entitlement in my project, and using a valid VoIP certificate, the profile does not include the required entitlement. Additional Information: I am using an Individual Apple Developer Account, not an Organization account. I have already attempted re-downloading the provisioning profile, restarting Xcode, and cleaning the build folder. Question: What steps should I take to resolve this and ensure that the com.apple.developer.voip-push-notification entitlement is included in my provisioning profile? Is this limitation due to the type of developer account (individual vs. organization), and do I need to upgrade to an Organization account to access this entitlement? Is there any way to request for 'com.appple.developer.voip-push-notification' entitlement to Apple Team ? Any clarification would be appreciated. Thank you.

Hello Engineers My app was rejected with the message below, BUT I don't have this entitlements in my project! I already removed all Xcode files under ${HOME}/Developer/Xcode, but the problem still alive! Guideline 2.4.5(i) - Performance In order to continue reviewing your app, we require additional information. Your app uses one or more entitlements which do not appear to have matching functionality within the app. Please reply to this message in App Store Connect and describe how and where the app uses the following entitlements. You will not need to upload a new binary to provide this information. Apps should have only the minimum set of entitlements necessary for the app to function properly. If there are entitlements that are not needed, please remove them and submit an updated binary. You will need to Developer Reject the app to upload an updated version. "com.apple.security.assets.pictures.read-write" "com.apple.security.assets.movies.read-write" "com.apple.security.assets.music.read-write" "com.apple.security.files.downloads.read-write" Here my entitlements: <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>com.apple.security.app-sandbox</key> <true/> <key>com.apple.security.application-groups</key> <array> <string>group.org.eof.apps</string> </array> <key>com.apple.security.files.user-selected.read-write</key> <true/> </dict> </plist> code-block Who or where are these entitlements inserted? Which button should be clicked to deactivate them? Link to my project: DRFXBuilder Regards

I've developed a Mac app distributed through the App Store that uses NSAppleScript to control Spotify and Apple Music. I'm experiencing inconsistent behavior with automation permission prompts that's affecting user experience. Expected Behavior: When my app first attempts to send Apple Events to Spotify or Apple Music, macOS should display the automation permission prompt, and upon user approval, the app should appear in System Preferences &gt; Security &amp; Privacy &gt; Privacy &gt; Automation. Actual Behavior: Initial permission prompts work correctly when both apps are actively used after my app download. If a user hasn't launched Spotify/Apple Music for an extended period, the permission prompt fails to appear when they later open the music app. The music app doesn't appear in the Automation privacy pane too. Once this happens, permission prompts never trigger again for that app Steps to Reproduce: Fresh install of my app Don't use Spotify for several days/weeks Launch Spotify Trigger Apple Events from my app to Spotify No permission prompt appears, app doesn't show in Automation settings If you're using Apple Music during this time it runs without any problems. Troubleshooting Attempted: Used tccutil reset AppleEvents [bundle-identifier] - no effect Verified target apps are fully launched before sending Apple Events Tried different AppleScript commands to trigger permissions Problem occurs inconsistently across different Macs Technical Details: macOS 13+ support Using standard NSAppleScript with simple commands like "tell application 'Spotify' to playpause" App Store distribution (no private APIs) Issue affects both Spotify and Apple Music but seems more prevalent with Apple Music Questions: Is there a reliable way to programmatically trigger the automation permission prompt? Are there timing dependencies for when macOS decides to show permission prompts? Could app priority/usage patterns affect permission prompt behavior? I use MediaManager to run the functions and initialize it on AppDidFinishLaunching method and start monitoring there. Any insights or workarounds would be greatly appreciated. This inconsistency is affecting user onboarding and app functionality.

Hi everyone, I’ve been struggling for days with a recurring issue in my iOS app build. The build fails with the following error: Provisioning profile "iOS Team Provisioning Profile: com.myapp.bundleid" doesn't include the com.apple.InAppPurchase entitlement. Here’s what I’ve already tried: Created a new Bundle ID with correct capabilities (In-App Purchase, Push Notifications, Sign in with Apple). Created a new provisioning profile manually from Apple Developer Console. Used EAS CLI (Expo) and Xcode to regenerate all certificates and provisioning profiles. Ensured that the In-App Purchase capability is enabled in the App ID (it's greyed out but enabled). Made sure all subscriptions and products in App Store Connect are “Ready to Submit”. Followed all steps from RevenueCat and Apple documentation. Cleaned entitlements in .entitlements file and tried both and variations. Tried building both locally and with EAS – same error every time. Sent multiple tickets to Apple Developer Support, but no helpful reply yet. Extra Notes: I'm using react-native-purchases and RevenueCat, already integrated and working before this started. The error began randomly; before that, I was able to build successfully with in-app purchases. Even creating a completely fresh app from scratch results in the same entitlement missing error. Has anyone faced this exact problem where the provisioning profile fails to include com.apple.InAppPurchase, even though everything is correctly set up? Any help or insights would be greatly appreciated. Thanks in advance!

I am building an application using .NET and Avalonia UI. The application is cross-platform. One of the tasks of the application is to coordinate data collection that is then routed into a Docker container for analysis. Everything works as expected in Windows. Everything works as expected in macOS on the development workstation and before packaging. After I package/codesign into a hardened runtime, I start seeing crashes at the moment when I try to execute the system calls to Docker. I am reasonably confident that this has something to do with an entitlement flag or some other permissions issue. I have been trying to sort this on my own for a while. I am only hoping someone can nudge me in the right direction. Thanks, Kevin