Hi, You're here because you've had issues with your implementation of Wallet Extensions for Apple Pay In-App Provisioning or In-App Verification. To prevent sending sensitive credentials in plain text, create a new report in Feedback Assistant to share the details requested below with the appropriate log profiles installed. Gathering Required Information for Troubleshooting Apple Pay In-App Provisioning or In-App Verification Issues While troubleshooting Apple Pay In-App Provisioning or In-App Verification, it is essential that the issuer is able to collect logs on their device and check those logs for error message. This is also essential when reporting issues to Apple. To gather the required data for your own debugging as well as reporting issues, please perform the following steps on the test device: Install the Apple Pay and Wallet profiles on your iOS or watchOS device. If the issue occurs on Mac, continue to Step 2. Reproduce the issue and make a note of the timestamp when the issue occurred, while optionally capturing screenshots or video. Gather a sysdiagnose on the same iOS or watchOS device, or on macOS. Create a Feedback Assistant report with the following information: The bundle IDs App bundle ID Non-UI app extension bundle ID (if applicable) UI app extension bundle ID (if applicable) The serial number of the device. For iOS and watchOS: Open Settings > General > About > Serial Number (tap and hold to copy). For macOS: Open the Apple () menu > About This Mac > Serial Number. The SEID (Secure Element Identifier) of the device, represented as a HEX encoded string. For iOS and watchOS: Open Settings > General > About > SEID (tap and hold to copy). For macOS: Open the Apple () menu > About This Mac > System Report > NVMExpress > Serial Number. The sysdiagnose gathered after reproducing the issue. The timestamp (including timezone) of when the issue was reproduced. The type of provisioning failure (e.g., error at Terms & Conditions, error when adding a card, etc.) The issuer/network/country of the provisioned card (e.g., Mastercard – US) Last 4 digits of the FPAN Last 4 digits of the DPAN (if available) Was this test initiated from the Issuer App? (e.g., yes or no) The type of environment (e.g., sandbox or production) Screenshots or videos of errors and unexpected behaviors (optional). Important: From the logs gathered above, you should be able to determine the cause of the failure from PassbookUIService, PassKit or PassKitCore, and by filtering for your SEID or bundle ID of your app or app extensions in the Console app. Submitting your feedback Before you submit to Feedback Assistant, please confirm the requested information above is included in your feedback. Failure to provide the requested information will only delay my investigation into the reported issue within your Apple Pay client. After your submission to Feedback Assistant is complete, please respond in your existing Developer Forums post with the Feedback ID. Once received, I can begin my investigation and determine if this issue is caused by an error within your client, a configuration issue within your developer account, or an underlying system bug. Cheers, Paris X Pinkney |  WWDR | DTS Engineer

Hi, To ensure the issue is not caused by an error within your app or web service request, please review the Apple Pay Merchant Integration Guide. Additionally, please review the following technotes on Apple Pay: TN3173: Troubleshooting issues with your Apple Pay merchant identifier configuration TN3174: Diagnosing issues with the Apple Pay payment sheet on your website TN3175: Diagnosing issues with displaying the Apple Pay button on your website TN3176: Troubleshooting Apple Pay payment processing issues If the resources above don’t help identify the cause of the error, please provide more information about your app or web services to get started. To prevent sending sensitive credentials in plain text, create a report in Feedback Assistant to share the details requested below. Additionally, if the error is something we need to investigate further, the appropriate engineering teams also have access to the same information and can communicate with you directly within Feedback Assistant for more information, as needed. Please follow the instructions below to submit your report. For issues occurring with your native app or web service, perform the following steps: Install the Apple Pay profile on your iOS or watchOS device. If the issue occurs on Mac, continue to Step 2. Reproduce the issue and make a note of the timestamp when the issue occurred, while optionally capturing screenshots or video. Gather a sysdiagnose on the same iOS or watchOS device, or on macOS. Create a Feedback Assistant report with the following information: The serial number of the device. For iOS and watchOS: Open Settings > General > About > Serial Number (tap and hold to copy). For macOS: Open the Apple () menu > About This Mac > Serial Number. The SEID (Secure Element Identifier) of the device, represented as a HEX encoded string. For iOS and watchOS: open Settings > General > About > SEID (tap and hold to copy). For macOS: Open the Apple () menu > About This Mac > System Report > NVMExpress > Serial Number. The sysdiagnose gathered after reproducing the issue. The timestamp of when the issue was reproduced. Screenshots or videos of errors and unexpected behaviors (optional). Important: From the logs gathered above, you should be able to determine the cause of the failure from PassbookUIService, PassKit or PassKitCore, and by filtering for your SEID or merchant domain in the Safari Web Inspector. See Inspecting Safari on macOS to learn more. Submitting your feedback Before you submit to Feedback Assistant, please confirm the requested information above is included in your feedback. Failure to provide the requested information will only delay my investigation into the reported issue within your Apple Pay website. After your submission to Feedback Assistant is complete, please respond in your existing Developer Forums post with the Feedback ID. Once received, I can begin my investigation and determine if this issue is caused by an error within your web implementation, a configuration issue within your developer account, or an underlying system bug. Cheers, Paris X Pinkney |  WWDR | DTS Engineer

For Apple Pay Testing purposes, we're trying out cards from https://developer.apple.com/apple-pay/sandbox-testing/ Visa, AMEX, Discover cards can be added to the wallet. But all 5 of the listed options for Mastercard cannot be added to the wallet with the error "Card Device Limit". How can we resolve this?

Hello, I’m experiencing a strange issue with a newly created Subscription Group in my iOS app. For all my existing subscription groups, everything works perfectly — initial purchase, renewals, cancellations, all notifications arrive normally. But for this one newly created group, the first purchase never triggers any server notification from App Store Server Notifications (ASSN). ⸻ 📘 Problem Summary • I created a new Subscription Group in App Store Connect. • The products are all Approved and Published for over a week. • Users can successfully purchase the subscription in production. • The purchase is shown as Purchased in the App Store purchase UI. • The receipt can be fetched locally on device. • But my server receives no notifications, including: • DID_RENEW • DID_CHANGE_RENEWAL_STATUS • SUBSCRIBED • ONE_TIME_CHARGE • CONSUMPTION_REQUEST • etc. The old subscription groups still send notifications normally, so the notification URL and server infrastructure are correct.

Hello, I'm using PassKit with to perform Apple Pay payment in a financial application. Our approach are: On iOS application, define PKMerchantCapability threeDSecure and credit, perform apple pay experience and get the encrypted response. On PCI service, receive the encrypted data Payment token, decrypt this data, and use to perform the payment. The problem is, in MasterCard transaction the eciIndicator is missing. I want to know if has some rule or problem about it.

Our company sells insurance and we'd like to offer annual renewals via Apple Pay on the Web. Most of the docs seem to point towards using recurringpaymentrequest but this method required an amount value which would only be calculated at renewal time. It appears that Shopify is doing something akin to what we want where they do auto payments so my question is can we do annual payments with unknown renewal prices with Apple Pay for Web ? What we cannot do is show the renewal price like this as it being insurance is almost certain to change. This is our current code which works but won't get past the regulator. const applePayPaymentRequestAnnual = { countryCode: 'GB', currencyCode: 'GBP', supportedNetworks: ['visa', 'masterCard'], merchantCapabilities: ['supports3DS'], requiredBillingContactFields: ['postalAddress', 'email'], requiredShippingContactFields: ['phone'], recurringPaymentRequest: { paymentDescription: 'Annual Insurance Renewal', regularBilling: { label: 'Annual Renewal Premium', amount: price, paymentTiming: "recurring", recurringPaymentIntervalUnit: "year", recurringPaymentStartDate: year + "-" + month + "-" + day + "T00:00:00.000Z", type: 'final' }, managementURL: window.location.protocol + '//' + window.location.host + '/manage-policy', tokenNotificationURL: window.location.protocol + '//' + window.location.host + '/apple-pay-notifications' }, lineItems: [{ label: alabel, amount: price, }], total: { label: alabel, amount: price, type: "final" }, }

I'm seeking clarification on how Requirement 4.1 ("Card Issuers with a Mobile App must support In-App provisioning") applies when the card issuer uses a third-party mobile banking platform rather than a self-developed app. Our situation: We are a small credit union (the card issuer) Our mobile banking app is provided by a third-party digital banking vendor (white-label, but branded with our name) Card processing is handled by a separate vendor The ambiguity: The Apple Pay Specifications define "Card Issuer Mobile App" as: "The Card Issuer-branded, iOS software application made available on a Device that is used by such Card Issuer's customers to manage, administer, or use Cards." Our mobile banking app meets this definition—it's branded with our name and used by our members to manage their accounts and cards. However, we don't develop or directly control the app; our digital banking vendor does. The webinar FAQ stated: "Do we have to implement in-app provisioning? Yes, if you have an app." Our digital banking vendor interprets this as not applying to them because they are "not the issuer." They've stated: "Apple's requirements are at the card-processor level... our credit unions and, by extension, we are not required to support Apple Pay's in-app provisioning." Our card processor has indicated they will support in-app provisioning integrations but notes "this would be digital provisioning and we would need the digital banking vendor to work with us to enable." Specific questions: When a card issuer uses a third-party mobile banking app (branded for the issuer but developed/maintained by a vendor), does Requirement 4.1 apply? If yes, who bears compliance responsibility—the issuer, the mobile app vendor, or both? If the mobile app vendor does not implement in-app provisioning by January 15, 2026, what is the issuer's exposure? Does the issuer face suspension from the Program due to vendor non-compliance? Is there an alternative compliance path under Requirement 4.8 (Web Provisioning) for issuers whose mobile app vendors cannot deliver in-app provisioning by the deadline? This scenario likely affects hundreds of small financial institutions using shared digital banking platforms. Clarity on vendor vs. issuer responsibility would help the entire ecosystem prepare appropriately. Thank you.

Hello, we develop a banking app and have successfully provisioned our cards (they are in the Wallet). But the method passes() of PassKit library always returns empty list. What may be the reason of this? Thanks.

Cybersource production support has clarified issue as below "On the BAD Case, it seems that the Apple Payload did not contain the "onlinePaymentCryptogram" object within the JSON. The Cryptogram is critical and mandatory. Since the merchant cannot really control this, and since CYBS is just decrypting the payload and uses it, we cannot comment as to why it was missing. The merchant would need to reach out to Apple and/or decrypt the payment themselves locally to check if and why this data was not present, for troubleshooting purposes."

Cybersource production support has clarified issue as below "On the BAD Case, it seems that the Apple Payload did not contain the "onlinePaymentCryptogram" object within the JSON. The Cryptogram is critical and mandatory. Since the merchant cannot really control this, and since CYBS is just decrypting the payload and uses it, we cannot comment as to why it was missing. The merchant would need to reach out to Apple and/or decrypt the payment themselves locally to check if and why this data was not present, for troubleshooting purposes."

Dear Apple Developer Support, I would like to request a technical escalation to the engineering team regarding an ongoing issue with Apple Pay domain verification. Error returned by Apple Even though Apple’s request to our domain returns HTTP 200, the verification still fails with: resultCode: 13014 resultString: "Domain verification failed. Review your TLS Certificate configuration to confirm that the certificate is accessible and a supported TLS Cipher Suite is used." requestUrl: https://developer.apple.com/services-account/QH65B2/account/ios/identifiers/verifyDomain TLS Certificate Validation We performed a full TLS analysis: Certificate issued by Sectigo Public Server Authentication CA DV E36 (public trusted CA) Full and correct certificate chain No handshake errors Configuration fully valid SSL Labs rating: A From our side, the TLS configuration is confirmed to be correct. Accessibility of the .well-known file The file is publicly and accessible It returns 200 OK and the content is exactly identical to the file downloaded from the Apple Developer Portal, without any modification. Our network team confirmed that Apple’s verification request also receives HTTP 200 when pressing “Verify” in the Apple Developer Console. Network-side findings We monitored Apple’s request in real time. Findings: TLS handshake succeeds No cipher mismatch File delivered correctly Status: 200 OK No redirect or transformation applied Despite this, Apple still returns error 13014. Request for engineering review We kindly request that an Apple engineer verify the following: The actual TLS handshake performed by Apple's verification service (cipher suite, protocol negotiation, SNI, trust chain). Whether the Sectigo issuing CA is fully trusted and supported by your domain-verification backend. If there is an internal reason behind error 13014—since the external message does not provide actionable details. Whether the response is rejected for reasons other than TLS, given that the file is accessible and the request returns 200. The exact condition that leads Apple to report “TLS Certificate configuration is incorrect” in this case. This issue is blocking an urgent deployment and must be resolved as soon as possible. Existing case reference Case ID: 102760005987 We are fully available to provide: full response headers packet captures (PCAP) SSL/TLS diagnostics file integrity checks server configuration details or join a technical call (Teams / WebEx) Thank you in advance for the escalation. Andrea

My client has provided me with admin access to the Apple Developer console. However, when I log in, I am prompted to enroll in the Apple Developer Program. Should I proceed with the enrollment myself, or does the client need to complete the enrollment from their own account?

I developed a web app using .net c#. The app runs a workflow which included Apple payment. App can work on any browser of any device (even non-IOS). When the app is browsed using PC windows Chrome browser, the payment sheet will show with QR code to scan using iPhone. If I cancelled the pop-up by clicking on X without scanning the code, and then returned to idle screen and performed another payment, I will reach paymentRequest.Show() but nothing will show and no errors are logged in console. Note that: I use Payment Request API The issue appear on the second payment. The issue will be solved once I refresh the page. My app supports both single and separate pages mode and issue appear on both. I used to see an error "Uncaught NotSupportedError: Failed to execute 'define' on 'CustomElementRegistry': the name apple spinner has already been used with this registry. So I thought the issue might be in loading the apple SDK script multiple times, and solved the issue to be loaded only once. The error disappeared but the issue persist without errors.

During checkout at apple.com using a non-supported Apple Pay on the Web browser, apple.com presents a QR like code offering to "Scan Code with iPhone" to pay. The payment continues using Apple Pay on the iPhone after scan. We already offer Apple Pay and Apple Pay on the Web. Is this QR code option available for us for non-supported browsers? Could you point me to the docs to add it? Thank you.

We have been using ApplePay on the web for years, but we are running into a problem since today in sandbox where domainName is missing from the create payment sessions request. We haven't changed anything related to this request any time recently. Static payment sessions url being hit in sandbox: https://apple-pay-gateway-cert.apple.com/paymentservices/paymentSession request format: "merchantIdentifier": "merchant.com.identifier", "displayName": "Test Store", "initiative": "web", "initiativeContext": "test.example.com", "domainName": "test.example.com" response format: { "epochTimestamp": 1763533367972, "expiresAt": 1763536967972, "merchantSessionIdentifier": "<merchantSessionIdentifier>", "nonce": "<nonce>", "merchantIdentifier": "<merchantIdentifier>", "displayName": "Test Store", "signature": "<signature>", "initiative": "web", "initiativeContext": "test.example.com", "signedFields": [ "merchantIdentifier", "merchantSessionIdentifier", "initiative", "initiativeContext", "displayName", "nonce" ], "operationalAnalyticsIdentifier": "Test Store:<identifier>", "retries": 0, "pspId": "<pspId>" } Production create session request to https://apple-pay-gateway.apple.com/paymentservices/paymentSession is behaving as expected, sending the following fields as response: epochTimestamp, expiresAt, merchantSessionIdentifier, nonce, merchantIdentifier, domainName, displayName, signature, operationalAnalyticsIdentifier, retries, pspId Claude seems to suggest this is a response when Messages for Business is enabled, but this ApplePay Payment Processing merchant is only configured for Apple Pay on the Web. Any ideas or pointers to check for? We are worried this will spill over in production as well, which will break our ApplePay integration. Thanks in advance!

Hi everyone, I’m encountering a strange issue with Apple Pay in our React Native iOS app using the Stripe React Native SDK. Summary of the Problem: • Apple Pay shows up as an available payment method inside the Stripe Payment Sheet. • When I tap Apple Pay, the Apple Pay sheet opens normally. • After confirming payment, the Apple Pay sheet immediately closes, and nothing happens. • No payment is created and no request reaches Stripe’s servers. On Stripe Dashboard the PaymentIntent remains incomplete, with no errors, which means the failure happens before Stripe receives anything. Environment • React Native with @stripe/stripe-react-native • StripeProvider configured with: <StripeProvider publishableKey={...} merchantIdentifier="merchant.com.app.venga" stripeAccountId={...} urlScheme="venga" > Apple Pay works on our web checkout with the same merchant identifier. We have verified all of the required Apple Pay setup: • Merchant ID exists, active, and matches exactly. • Merchant ID added to the iOS app target in Xcode → Signing & Capabilities. • Apple Pay capability enabled. • Merchant domain is verified (web checkout works). • Apple Pay certificate and merchant certificate are valid. • Stripe publishable key and merchantIdentifier are correct. • Stripe SDK correctly initialized. • Device region supports Apple Pay. Extra Observations: • The PaymentIntent’s allowed_payment_methods includes "card" and Apple Pay does appear in the payment sheet. • But after tapping Pay → the Apple Pay sheet closes instantly. • There is no callback with an error, and nothing appears in Stripe logs. • We are testing in Sweden. As far as I know Apple Pay should work fine here. Questions: What could cause the Apple Pay sheet to dismiss instantly after attempting a payment? Could this be caused by a merchant ID mismatch—even if Apple Pay appears in the sheet? Is there any Apple-device-level requirement (region, wallet config, card type) that could cause this silent failure? Is there a way to get more detailed logs when Apple Pay closes before Stripe receives anything? Any help or suggestions would be greatly appreciated. Thanks!

We are working with two types of wallet passes. Provisioning works successfully for one pass type via wallet extensions, but the same process is not functioning for the other. For the second pass type, we are able to generate the required data for pull provisioning and send it to Apple. Additionally, in-app push provisioning for this pass type completes without issue. We would appreciate guidance on how to further debug and resolve this provisioning problem.

We have updated the PNO metadata to include the associatedApplicationIdentifiers for our wallet extensions and the issuer app. While we are able to successfully provision the card to Apple Wallet via pull provisioning, we are unable to retrieve the payment passes that have already been provisioned. How can we address this issue? let passLibrary = PKPassLibrary() let paymentPassLibrary = self.passLibrary.passes(of: .secureElement) paymentPassLibrary is an empty array even though we have passes provisioned.

PLATFORM AND VERSION iOS Development environment: Xcode Version 16.2 (16C5032a), macOS 14.6.1 Run-time configuration: iOS 26 DESCRIPTION OF PROBLEM We would like to seek clarification on how to determine whether a card used via Apple Pay is a credit or debit card before sending the transaction request. Currently, we can retrieve the card type information (credit/debit) from the Apple Pay response payload, but this is only available after the payment has been processed. However, we need to determine the card type in advance, as our system calculates and applies transaction fees based on the card type, which should be added to the total transaction amount before submission. Could you please advise if there is any parameter, API field, or pre-authorization mechanism available to identify the card type prior to initiating the transaction request? We would appreciate your guidance or any related documentation for implementing this. STEPS TO REPRODUCE Initiate Apple pay Payment from Apple pay Getting payload we can retrieve the card type information (credit/debit) from the Apple Pay response payload, but this is only available after the payment has been processed. We need to identify if there's any way to know the card user selected(whether it is credit/debit) before processing the payment.

Hi all, I’m running into a confusing issue with Apple Pay domain verification. Apple’s documentation says to host the verification file at: https://yourdomain.com/.well-known/apple-developer-merchantid-domain-association And the portal itself seems to expect the file to be served with .txt extension during verification. My first verification passed, but subsequent checks are failing — and I’m wondering if this mismatch is the cause. Should I Keep the .txt and configure my server to serve it at both paths? Would appreciate any insights or official clarification. Thanks!

I recently created a Sandbox account and successfully added an Apple Pay test MasterCard to the sandbox Wallet to run a test. Yesterday, I created a different account and tried to add a MasterCard on another device, but I received a "Card device limit" error. I then deleted the card from the original device (where it had been successfully added) and tried to re-add it, but this device also failed. I was able to confirm that a JCB card can be added, but I need to test with MasterCard. What should I do to resolve this?

We’re attempting to call the Apple Pay Web Merchant Registration API using our Platform Integrator flow and consistently receive 401 Unauthorized, despite successful TLS/mTLS. Details: Endpoint: https://apple-pay-gateway-cert.apple.com/paymentservices/registerMerchant (POST) Payload: { "domainNames": ["breakerfy.com"], "encryptTo": "platformintegrator.ai.packman", "partnerInternalMerchantIdentifier": "merchant.ai.packman.1", "partnerMerchantName": "breakerfy", "merchantUrl": "https://breakerfy.com" } Domain association: URL: https://breakerfy.com/.well-known/apple-developer-merchantid-domain-association What we tried: We created a Payment Platform Integrator ID (platformintegrator.ai.packman) We created a CertificateSigningRequest We used the certificate signing request to create an Apple Pay Platform Integrator Identity Certificate and downloaded the signed certificate. We exported the Private Key from keychain access in PKCS 12 format We converted both the private key and the signed certificate to PEM format We created a merchant id We used the converted keys to send requests to the API We received { "statusMessage": "Payment Services Exception Unauthorized", "statusCode": "401" } we also tried curl with the original p12 file and also had no luck. What could be the issue ?