In the last few weeks 5 users have reported my workout watch app being unable to read health data despite the permissions being enabled in the iPhone Settings app. This has been a common complaint over the years and is usually fixed by disabling the permissions; rebooting both devices; and then enabling them again. This usually nudges iOS into sending the permissions to watchOS. However that procedure doesn't work for these users, all of whom are using watchOS 10.6.2. They are using various versions of iOS 18 or 26 so it seems to be a problem with that version of watchOS, which users are usually limited to because their hardware won't support anything more up to date. It seems that unpairing and re-pairing the watch can fix the problem but not always. I looked around and it seems that other apps are having the same problem: https://www.reddit.com/r/runna/comments/1rhhs2n/runna_wont_start_an_outdoor_run_on_apple_watch/ Does anyone know a way to fix this? My current advice is to repeatedly unpair / re-pair until it works, which isn't really practical! Thanks in advance.

Hello Apple Developer Support / Community, I would like clarification regarding HealthKit observer behavior when comparing a Flutter-based iOS app with a fully native iOS app. We are using HealthKit background delivery with: HKObserverQuery enableBackgroundDelivery HKAnchoredObjectQuery We have observed that in a Flutter-based app, HKObserverQuery callbacks appear to execute multiple times or more frequently than expected for a single data update. In comparison, a native iOS implementation using similar HealthKit logic appears more stable and predictable. We would like to understand the expected platform behavior and whether there are any known considerations from Apple’s perspective. Specific questions: Does iOS treat HealthKit observer delivery differently for apps built with Flutter versus fully native UIKit / Swift apps? Are there known issues where app lifecycle handling, Flutter engine initialization, method channels, isolates, or plugin architecture could cause repeated observer callbacks? Can repeated HKObserverQuery executions occur if queries are registered multiple times during app launches or engine restarts? Does Apple recommend any specific observer management pattern for cross-platform frameworks such as Flutter? From the HealthKit system side, should observer callback frequency be identical regardless of whether the app is Flutter or native, assuming the same iOS code is used? We are trying to determine whether this behavior is due to HealthKit delivery semantics, duplicate observer registration, Flutter lifecycle integration, or framework-related limitations. Any guidance from Apple or developers who have implemented HealthKit successfully in Flutter would be appreciated. Thank you.

Hello Apple Developer Support / Community, I would like clarification regarding HealthKit data access behavior when an iPhone is locked. We are building an app that uses: HKObserverQuery enableBackgroundDelivery HKAnchoredObjectQuery Background execution to sync HealthKit data to our server Our specific question is: When the device is locked with passcode/Face ID protection enabled, can an app launched in the background through HKObserverQuery or other background mechanisms reliably access and read HealthKit data? We would like to understand the expected Apple-supported behavior for the following scenarios: If new HealthKit samples are written while the phone is locked, will HKObserverQuery still trigger immediately? If the observer callback is invoked while locked, can HKAnchoredObjectQuery successfully read the new samples? Is HealthKit data inaccessible while locked due to Data Protection / encrypted store behavior? Should developers expect delivery or data reads to be deferred until the user unlocks the device? We are trying to set correct expectations for background syncing and would appreciate official clarification on whether near real-time HealthKit sync is possible while the device remains locked. Relevant documentation mentions HealthKit store encryption, but we would appreciate direct confirmation for production behavior. Thank you.

In the WWDC 2019 session "Extended Runtime for WatchOS apps" the video talks about an entitlement being required to use the HR sensor judiciously in the background. It provides a link to request the entitlement which no longer works: http://developer.apple.com/contect/request/health-monitoring The session video is also quite hard to find these days. Does anyone know why this is the case? Is the API and entitlement still available? Is there a supported way to run, even periodically, in the background on the Watch app (ignoring the background observer route which is known to be unreliable) and access existing HR sensor data

Hello, I have submitted multiple requests for the Family Controls Distribution Entitlement through this form: https://developer.apple.com/contact/request/family-controls-distribution After submitting my requests, I waited for about 1 week but did not receive any response. Since I heard nothing, I contacted Apple Developer Support by email. After that, I finally received a response from an advisor asking for additional information, including my follow-up number. I replied with all the requested information immediately, but it has now been 5 more days and I still have not received any further response. In total, I have been waiting for about 2 weeks for this entitlement request. My app is a Screen Time control / digital wellbeing application that helps users reduce screen time through exercise-based challenges and healthy habits. My app uses the FamilyControls, ManagedSettings, and DeviceActivity frameworks and requires the Distribution Entitlement for App Store release. Here are my details: Case Number: 102866460896 Request Type: Family Controls Distribution Entitlement I understand the team may be busy, but I would appreciate any help checking the status of my request or escalating it if possible. Thank you very much.

While attempting to read a user’s daily step history spanning backward to the last 7 days, a small but consistent subset of users encounter Error Code 3 with the underlying error description: Error Code 3 "Unable to invalidate interval: no data source available." When this error occurs, we are entirely unable to read their step history. We have received ~10 direct user reports of this within the last couple of weeks.

Hello, I'm seeing an inconsistency in how HKAnchoredObjectQuery applies predicates between its initial results handler and its update handler. Specifically, predicates that filter quantity samples by correlation membership - using either HKQuery.predicateForObjectsWithNoCorrelation() or NSPredicate(format: "%K == nil", HKPredicateKeyPathCorrelation) - are respected in the resultsHandler but silently ignored in the updateHandler. Setup I have three long-running HKAnchoredObjectQuery instances: One for HKCorrelationType(.bloodPressure) - no predicate One for HKQuantityType(.bloodPressureSystolic) - predicate: HKQuery.predicateForObjectsWithNoCorrelation() One for HKQuantityType(.bloodPressureDiastolic) - predicate: HKQuery.predicateForObjectsWithNoCorrelation() The intent of the predicate on the systolic/diastolic queries is to capture only standalone quantity samples written directly by third-party apps - not the constituent sub-samples of an HKCorrelation. The correlation query handles correlated samples. Expected behavior When a BloodPressure correlation is saved to the store, only the correlation query's updateHandler should fire, with 1 new sample. The systolic and diastolic updateHandlers should not fire, since those samples have correlation != nil which is excluded by the predicate. Actual behavior After saving one BloodPressure correlation, all three updateHandlers fire with 1 new object each. The systolic and diastolic update handlers receive the correlated sub-samples despite the predicateForObjectsWithNoCorrelation() predicate. The same predicate correctly filters those kinds of samples out of the initial resultsHandler. Additionally, the same predicate applied in a one-shot HKSampleQuery for the systolic or diastolic type correctly returns 0 results when only correlated readings exist. The problem is only experienced in updateHandler of a long-running HKAnchoredObjectQuery. Tested iOS versions iOS 26.3 iOS 18.7.6 Workaround When an HKAnchoredObjectQuery updateHandler fires with systolic or diastolic samples, I fire a one-shot HKSampleQuery with a compound predicate using the sample UUIDs and predicateForObjectsWithNoCorrelation. Any samples that are part of a correlation are not returned in the HKSampleQuery resultsHandler.

Hi Team, We are implementing HealthKit data sync using HKObserverQuery along with enableBackgroundDelivery and BGTaskScheduler for fallback processing. However, we are observing inconsistent behavior and would like clarification on expected system behavior: For HKObserverQuery: When using enableBackgroundDelivery with frequency .immediate, we sometimes receive updates promptly, but other times we do not receive any trigger at all. Similarly, when using .hourly, our expectation was that updates would be delivered approximately once per hour, but in practice, triggers are delayed, batched, or skipped. For BGTaskScheduler: We are scheduling BGAppRefreshTask with earliestBeginDate set (e.g., 1 hour), but tasks are sometimes delayed by several hours or not triggered predictably. In some cases, tasks are not executed even after extended periods. We would like to understand: Are HKObserverQuery delivery frequencies (.immediate, .hourly, .daily) strictly best-effort hints rather than guaranteed intervals? Under what conditions can observer updates be skipped or significantly delayed? Is there any recommended approach to ensure more reliable periodic syncing of HealthKit data? For BGTaskScheduler, what factors most strongly influence scheduling delays or missed executions? Our goal is to design a reliable sync mechanism, but the lack of deterministic behavior is making it difficult to define expected system behavior. Any clarification or recommended best practices would be greatly appreciated. Thanks in advance!

I'm developing a watchOS nap app that detects when the user falls asleep by monitoring heart rate changes. == Technical Implementation == HKWorkoutSession (.mindAndBody) for background execution HKAnchoredObjectQuery for real-time heart rate data CoreMotion for movement detection == Battery Considerations == Heart rate monitoring ONLY active when user explicitly starts a session Monitoring continues until user is awakened OR 60-minute limit is reached If no sleep detected within 60 minutes, session auto-ends (user may have abandoned or forgotten to stop) App displays clear UI indicating monitoring is active Typical session: 15-30 minutes, keeping battery usage minimal == The Problem == HKWorkoutSession affects Activity Rings during the session. Users receive "Exercise goal reached" notifications while resting — confusing. == What I've Tried == Not using HKLiveWorkoutBuilder → Activity Rings still affected Using builder but not calling finishWorkout() (per https://developer.apple.com/forums/thread/780220) → Activity Rings still affected WKExtendedRuntimeSession (self-care type) (per https://developer.apple.com/forums/thread/721077) → Only ~10 min runtime, need up to 60 min HKObserverQuery + enableBackgroundDelivery (per https://developer.apple.com/forums/thread/779101) → ~4 updates/hour, too slow for real-time detection Audio background session for continuous processing (suggested in https://developer.apple.com/forums/thread/130287) → Concerned about App Store rejection for non-audio app; if official approves this technical route, I can implement in this direction Some online resources mention "Health Monitoring Entitlement" from WWDC 2019 Session 251, but I could not find any official documentation for this entitlement. Apple Developer Support also confirmed they cannot locate it? == My Question == Is there any supported way to: Monitor heart rate in background for up to 60 minutes WITHOUT affecting Activity Rings or creating workout records? If this requires a special entitlement or API access, please advise on the application process. Or allow me to submit a code-level support request. Any guidance would be greatly appreciated. Thank you!

Has anyone actually managed to read the free-text note/context from Apple Health State of Mind entries? I’m building an iOS app that reads HKStateOfMind data from HealthKit. I can get the expected stuff fine: valence labels associations But in the Health app, users can also add extra context text to a mood entry, like: Tasks, Weather - Great work-life balance From my app, I can read Tasks and Weather, but I can’t find the Great work-life balance part anywhere. I already checked: public HKStateOfMind properties metadata debug description / object description attachment-ish routes Nothing so far. So before I spend more time chasing this: is that text just not exposed to third-party apps? Or is there some weird HealthKit path I’m missing? If anyone has actually pulled this off, I’d love to know how.

I have a watchOS app with a connected iOS app using Swift and SwiftUI. The watchOS app should read heart rate date in the background using HKOberserQuery and enableBackgroundDelivery(), send the data to the iPhone app via WCSession. The iPhone app then sends the data to a Firebase project. The issue I am facing now it that the app with the HKObserverQuery works fine when the app is in the foreground, but when the app runs in the background, the observer query gets triggered for the first time (after one hour), but then always get terminated from the watchdog timeout with the following error message: CSLHandleBackgroundHealthKitQueryAction scene-create watchdog transgression: app<app.nanacare.nanacare.nanaCareHealthSync.watchkitapp((null))>:14451 exhausted real (wall clock) time allowance of 15.00 seconds I am using Xcode 16.3 on MacOS 15.4 The App is running on iOS 18.4 and watchOS 11.4 What is the reason for this this issue? I only do a simple SampleQuery to fetch the latest heart rate data inside the HKObserverQuery and then call the completionHandler. The query itself takes less than one second. Or is there a better approach to read continuously heart rate data from healthKit in the background on watchOS? I don't have an active workout session, and I don't need all heart rate data. Once every 15 minutes or so would be enough.

I'm building an app with a leaderboard based on users' step counts, so I need the data to sync in real time at minimum. The problem is that when the app is terminated, steps don't seem to be counted at all, so if a user hasn't opened the app in 5 days, the leaderboard ends up completely out of sync. Is it even possible to retrieve this data when the app has been terminated and hasn't been opened? I'm currently using Background Fetch, which works when the app is suspended, slowly, but it does work. However, it does not sync when the app is fully terminated.

Hi, I'm having the same issue described in https://developer.apple.com/forums/thread/690974?page=2. When connected to Xcode or when the app is in the foreground, HKObserverQuery fires correctly and my app processes step updates. But once disconnected from Xcode, background delivery stops completely and the observer callback is never called. My setup: com.apple.developer.healthkit.background-delivery entitlement is present and in the provisioning profile enableBackgroundDelivery(for: .stepCount, frequency: .immediate) returns success = true HKObserverQuery is registered on every launch including background launches I also have CMPedometer.startEventUpdates running as a supplemental trigger Background Modes includes "Background fetch" and "Background processing" Device: iPhone, iOS 17.4+ App type: App uses Screen Time / Family Controls (ManagedSettings) to block apps until a step goal is met Has anyone found a reliable fix? Any feedback from Apple engineers would be appreciated.

WorkoutKit WorkoutScheduler seems broken with the first beta of iOS 18.2. I have tested using my app from Xcode and the one that is on the App Store (and working properly on other devices), and it's not working with this new beta of iOS. They appears in WorkoutScheduler.shared.scheduledWorkouts, but not on the watch. I even tried with other apps that do the same with Manual add to Apple Watch with SwiftUI workoutPreview work. Xcode 16.0 iOS 18.2 Beta 1 WatchOS 11.1

I have a iOS/watchOS app that gives audio cues, like a metronome, on specific patterns. The intent of the watch app is to have it at the same time as a workout app (ie Strava, Apple Fitness) and/or a music app (Spotify/Apple Music). The app works in the foreground just fine. But if I start another app (i.e. Strava) the haptic feedback and a "ding" continues to play in the background, but the "beep or voice" stops. Beep/voice works fine in iOS when in the background, just not in watchOS.

I have a few feasibility questions regarding health data processing on iOS, related to HealthKit and system capabilities: Background Health Data Collection Can an iOS app continuously collect and process health data in the background, including: Collecting health data from the Health app while the device is locked or in sleep mode Triggering user notifications when anomalies are detected in health data processing Are there any technical limitations? Do these capabilities require specific enterprise qualifications or additional fees? 2. Emergency Contacts Integration Can an app write or modify the system’s built-in Emergency Contacts (Medical ID)? If a user updates Emergency Contacts in iOS Settings, can the app receive a change notification or access the updated data? 3. Automated Alerting for Health Metrics Beyond Apple’s fall detection, can abnormal health metrics (heart rate, irregular rhythm, blood oxygen, etc.) trigger automated alerts such as SMS to preset emergency contacts—without requiring the user to manually open the app or only receive on-device notifications? This is a feasibility inquiry about API and system behavior, not a bug report. Any official guidance or documentation references would be greatly appreciated.

Any plans to be able to allow to store Uric Acid (UA) and Ketones readings in Apple Health with HealthKit? There are now many blood test strips in the market that allow to read Glucose, UA and Ketones and currently only Glucose seems to be supported by HealthKit. Thank you

HealthKit is currently not supported on macOS nor tvOS, despite being supported by visionOS. Support for macOS was last asked about[1] here in 2018. My goal is to display interactive data visualisations over workouts collected in HealthKit on macOS. Will this be possible to do in the near future using HealthKit directly? If not, can I somehow read the information from an iPhone and display it on the mac? Cheers, Rodrigo [1] https://developer.apple.com/forums/thread/94937

The second time i start a workout session, the beginCollection instance method on HKLiveWorkoutBuilder freezes. To recreate run the Apple Sample Project Building a multidevice workout app. It looks like a bug with the HealthKit SDK and not the code but i could be wrong. The only workaround i found was erasing the simulator and reinstalling the app.

I am trying to figure out why my app is not receiving background deliveries from Healthkit. I have a successfully implemented HKObserverQuery  which is being used to send data like step count to a server. I have a successful enableBackgroundDelivery (completes without errors). I have also checkmarked the HealthKit Background Delivery and Clinical Health Records options in my app's Signing and Capabilities configurations. I know the observer is functional because the health data gets sent to the server when the app is running. The problem is I haven't seen any evidence of the observer handler being triggered when the app is not running. What am I missing? And what is the best way to go about debugging what is going wrong?