How do I add my hospital to the list of hospitals available on the Health Records on iPhone application?

I've ran into an error with the insertRouteData function of the HKWorkoutRouteBuilder that I can't seem to find any information on. The error is "Unable to find location series 1A193D3B-AFF5-41D8-A967-B1BE08D9F543 during data insert.". It seems to only happen when trying to insert very long routes, in the most recent case it was a 5 hour bike ride with 5900 samples. I save all the route data in a sqlite table as backup and after checking out the data there isn't any red flags as to why it would not insert correctly. Has anyone seen this before and could offer some insight or point me in the right direction to find the source of the error?

I'm trying to hook into the new workoutEffort score supported in iOS 18, I am collecting this information from users when they submit their workout and trying to add a sample to the HKWorkout in the same manner as I've been adding other samples like bodyweight, calories burned, etc. I'm receiving the error: HKWorkout: Sample of type HKQuantityTypeIdentifierWorkoutEffortScore must be related to a workout I tried adding the samples using HKWorkoutBuilder.add([samples]) as which has been working perfectly for calories burned & bodyweight, but I am receiving the above error for workoutEffortScore As a second approach, I tried adding the sample after I called finishWorkout on the HKWorkoutBuilder and received back the HKWorkout object using HKHealthStore.add([samples], to: HKWorkout) and am still receiving the same error! I don't know otherwise how to relate a sample to a workout, I thought those were the APIs to do so? I'm using Xcode 16.0 RC (16A242) and testing on an iOS 16 Pro simulator

I have FB12696743 open since July 21, 2023 and this happened again today. I get home at approx 10 mins after the hour, walk appox 50 ft across my yard, up 5 steps into my house, let the dog out and pace on my deck watching the dog, go back in the house walk around the kitchen while preparing dinner. A total of about 200 ft. I sit down about 35 past the hour and start to eat and at 10 mins to the next our and I get the reminder to stand. On the other side I wake up at 5 mins to hour. Walk 8 steps to the bathroom and successfully achieve the stand for that hour. WHY!?!?!? 😁🤣

WorkoutKit WorkoutScheduler seems broken with the first beta of iOS 18.2. I have tested using my app from Xcode and the one that is on the App Store (and working properly on other devices), and it's not working with this new beta of iOS. They appears in WorkoutScheduler.shared.scheduledWorkouts, but not on the watch. I even tried with other apps that do the same with Manual add to Apple Watch with SwiftUI workoutPreview work. Xcode 16.0 iOS 18.2 Beta 1 WatchOS 11.1

We are seeing an issue where sending data using the asynchronous method HKWorkoutSession.sendToRemoteWorkoutSession(data: Data) will never return in some cases (no success nor failure). This issue is happening for roughly 5% of Workouts started and will stay broken for the whole workout. The other 95% of the workouts, the connection works flawlessly. This happens on both watchOS 10 and 11, and with phones running iOS 17 or 18. The issue is quite random and not reproducible. Our app has thousands of workouts a day that use the workout session workout data send, with constant messages being send every few seconds. In some of those 5% cases the "sendToRemoteWorkoutSession" will throw way later, like 30+ minutes later, if the watch app is awake long enough to capture a log of a failure. Our code uses the same flow as in the sample project: https://developer.apple.com/documentation/healthkit/workouts_and_activity_rings/building_a_multidevice_workout_app Here is some sample code, which is pretty simple. Setup code: let workoutSession = try HKWorkoutSession(healthStore: healthStore, configuration: configuration) workoutSession.delegate = self activeWorkoutSession?.startMirroringToCompanionDevice { success, error in print("Mirroring started on companion device: \(success), error: \(error)") } workoutSession?.prepare() then later we send data using the workout session: do { print("Will send data") try await workoutSession.sendToRemoteWorkoutSession(data: data) print("Successfully sent data") // This nor the error may be called after waiting extensive amounts of time } catch { print("Failed to send data, error: \(error)") // This nor the success may be called after waiting extensive amounts of time } So far, the only fix is to restart the phone and watch at the same time, which is not a great user experience. Is anyone else seeing this issue? or know how to fix this issue?

When we upload workout data to HealthKit the route information with the workout detailed data is incomplete: just a few dots. When we select "Show all workout routes" the route data for the same workout shows correctly. We use the HKWorkoutBuilder to store the workout data, and add the location data with the HKWorkoutRouteBuilder to the workout with Is this an Apple Health issue, or do we have to change something in the way we store the location data to the workout?

For a given date, there are discrepancies between the step counts obtained from HealthKit and those displayed in the Health app. Is it possible for such discrepancies to occur even if step counts are not manually entered and multiple devices are not being used?

Hi, I've had trouble for a while now with HealthKit giving me different values if I make the request on iOS and WatchOS. I am using the exact same method on both with the same parameters but I get vast differences in the results. The code I am using to call HealthKit on both devices is: let dateRange = HKQuery.predicateForSamples(withStart: Date().removeMonths(numberOfMonths: 1), end: Date().endOfDay()) let predicate: NSPredicate predicate = NSCompoundPredicate(type: .and, subpredicates: [dateRange]) let query = HKStatisticsQuery(quantityType: HKQuantityType(.stepCount), quantitySamplePredicate: predicate, options: .cumulativeSum) { _, result, error in if error != nil { //print("Error fetching step count, or there is no data: \(error.localizedDescription), \(startDate) -> \(endDate)") onComplete(0) return } if let result, let sum = result.sumQuantity() { let stepCount = sum.doubleValue(for: HKUnit.count()) DispatchQueue.main.async { onComplete(Int(stepCount)) } } } healthStore.execute(query) }

In the fitness app under iOS 18, the location of all workouts is displayed on a small map. For workouts with routes, I can already successfully read out the route and thus also determine the starting point. So that works. For indoor workouts such as yoga or indoor rowing, the exact location is also displayed in the fitness app. I would now also like to read out this location for these indoor workouts in my app. Does anyone know how to do this?

Hi everyone! I'm trying to get the total sleep time for a given day, but users report that there's a difference between what my app reports and what the Apple Health app reports. In particular, we're off by 2 minutes less on average. What we're doing is: Get all the samples that are either core, deep, rem or unspecified Cut-off time at 3 PM previous day Merge overlapping intervals Add all the remaining intervals For debugging purposes I'm storing and sending all the raw samples to a server, and I have run tests and I don't find anything wrong. It looks like the number we come up with is correct according to our own rules. I wonder, how is Apple adding up all the samples to arrive at a number that's slightly off to our number. Any insight would be appreciated. Thanks.

I need to be able to create and store a HeartbeatSeries for a given time-period from an Apple Watch, to then retrieve that data from HealthKit to be processed. I have working code which allows me to begin a workout session, which is being used to determine how long a session has been running for. I also have working code for retrieving HeartbeatSeries data from HealthKit. The issue is that no HeartbeatSeries data is being stored into HealthKit as a result of the workout session running. Whether that session is running for as little as 30 seconds or as long as 20 minutes, nothing is stored. However, when I use the the Apple "Meditation" app (formerly known as "Breathe"), I can query HealthKit afterwards and retrieve a list of individual heartbeat timings during that 2 minute period. Therefore, it IS possible to store a HeartbeatSeries from within an app on the Apple Watch. What I would like to know is, how can I use the pulse sensor built-in to the Apple Watch to be able to record a HeartbeatSeries similar to how the Meditation app does it.

Hello Apple Community, What does approach use the Fitness app for swimming distance calculation per set (segment)? I've tried 2 options but all of them have different values than in the Fitness app. Calculation like that: pool length * number of laps = swimming distance BUT the Fitness app sometimes shows other values for distance per set (segment). Fetch all distance values via HKQuantityTypeIdentifier.distanceSwimming (HKSampleQuery`) and than try to match distance values with set (segment) duration. Again I got other values for swimming distance per set, values are bigger than in the Fitness app. let healthStore = HKHealthStore() let distanceType = HKQuantityType.quantityType(forIdentifier: HKQuantityTypeIdentifier.distanceSwimming)! let predicate = HKQuery.predicateForSamples(withStart: startDate as Date, end: endDate as Date?, options: .strictStartDate) let query = HKSampleQuery(sampleType: distanceType, predicate: predicate, limit: HKObjectQueryNoLimit, sortDescriptors: [.init(keyPath: \HKSample.startDate, ascending: true)], resultsHandler: { (query, results, error) in if let error { Logger.e("\(error)") continuation.resume(returning: nil) } continuation.resume(returning: results) }) healthStore.execute(query) Is it possible to get the same swimming distance like in the Fitness app per set via HealthKit?

I am a developer from mainland China. Today, I noticed that the HKWorkoutRoute data stored by my app in HealthKit shows significant discrepancies when viewed on the workout route map in the Health and Fitness apps on iOS 18.4. Instead of displaying the actual movement path, the route appears to be offset by several hundred meters. I collected this data using my app on watchOS 11.3.1, and all CLLocation data comes directly from Core Location. I did not convert WGS84 standard data to GCJ02. Reviewing historical data, all workout routes before March 17, 2025, appear correct, but every record after that date exhibits the offset issue.

Hello Apple Developer Community, I’m working on creating a chart that combines Screen Time Usage data with Workout Time from HealthKit. I’ve successfully implemented a DeviceActivityReportExtension to fetch Screen Time data and draw a chart. I’m also able to read HealthKit data from the main app. However, I’m having trouble integrating the HealthKit data into the View generated by the DeviceActivityReportExtension. I’ve attempted to read HealthKit data directly from the extension , but this doesn’t seem to work, likely due to HealthKit access restrictions in extensions. I also tied using a shared object to pass HealthKit data to the extension, but unfortunately this didn’t seem to work as expected. I’d greatly appreciate any suggestions on how to successfully integrate HealthKit data into the extension-generated View. Has anyone dealt with a similar challenge or found a workaround for this? Thanks in advance for your help!

We are developing a mobile app focused on lone worker protection, which does not include any fitness tracking features. We require the use of HKWorkoutSession solely to enable background execution of critical safety-related code. Could you please confirm whether this use of HKWorkoutSession is permitted under App Store Review guidelines, given that our app does not offer fitness or workout-related functionality?

I am trying to track a user's real-time sleep state using heart rate data, but I have encountered several issues: When using HKSampleQuery on the phone to fetch heart rate data, I can only retrieve data recorded before the app comes to the foreground or before it is terminated and restarted (see related issue: https://developer.apple.com/forums/thread/774953). I attempted to get data on the Apple Watch and send updates to the phone via Watch Connectivity. However, if I use WKExtendedRuntimeSession, although I can obtain data on the watch, once the watch screen goes off, it can no longer transmit data via Watch Connectivity to the phone (since I cannot guarantee the app will remain in the foreground when lying in bed). On the other hand, using HKWorkoutSession results in interference with the activity rings and causes the heart rate sensor to run too frequently, which I worry may affect the battery life of the watch. Is there an elegant solution for tracking a user's heart rate data for sleep monitoring?

I am currently developing an app that measures HRV to estimate stress levels. To align the values more closely with those from Galaxy devices, I decided not to use the heartRateVariabilitySDNN value provided by HealthKit. Instead, I extracted individual interbeat intervals (IBI) using the HKHeartBeatSeries data. Can I obtain accurate IBI data using this method? If not, I would like to know how I can retrieve more precise data. Any insights or suggestions would be greatly appreciated. Here is a sample code I tried. @Observable class HealthKitManager: ObservableObject { let healthStore = HKHealthStore() var ibiValues: [Double] = [] var isAuthorized = false func requestAuthorization() { let types = Set([ HKSeriesType.heartbeat(), HKQuantityType.quantityType(forIdentifier: .heartRateVariabilitySDNN)!, ]) healthStore.requestAuthorization(toShare: nil, read: types) { success, error in DispatchQueue.main.async { self.isAuthorized = success if success { self.fetchIBIData() } } } } func fetchIBIData() { var timePoints: [TimeInterval] = [] var absoluteStartTime: Date? let dateFormatter = DateFormatter() dateFormatter.timeZone = TimeZone(identifier: "Asia/Seoul") dateFormatter.dateFormat = "yyyy-MM-dd HH:mm:ss.SSS" var calendar = Calendar.current calendar.timeZone = TimeZone(identifier: "Asia/Seoul") ?? .current var components = DateComponents() components.year = 2025 components.month = 4 components.day = 3 components.hour = 15 components.minute = 52 components.second = 0 let startTime = calendar.date(from: components)! components.hour = 16 components.minute = 0 let endTime = calendar.date(from: components)! let predicate = HKQuery.predicateForSamples(withStart: startTime, end: endTime, options: .strictStartDate) let sortDescriptor = NSSortDescriptor(key: HKSampleSortIdentifierStartDate, ascending: false) let query = HKSampleQuery(sampleType: HKSeriesType.heartbeat(), predicate: predicate, limit: HKObjectQueryNoLimit, sortDescriptors: [sortDescriptor]) { (_, samples, _) in if let sample = samples?.first as? HKHeartbeatSeriesSample { absoluteStartTime = sample.startDate let startDateKST = dateFormatter.string(from: sample.startDate) let endDateKST = dateFormatter.string(from: sample.endDate) print("series start(KST):\(startDateKST)\tend(KST):\(endDateKST)") let seriesQuery = HKHeartbeatSeriesQuery(heartbeatSeries: sample) { query, timeSinceSeriesStart, precededByGap, done, error in if !precededByGap { timePoints.append(timeSinceSeriesStart) } if done { for i in 1..<timePoints.count { let ibi = (timePoints[i] - timePoints[i-1]) * 1000 // Convert to milliseconds // Calculate absolute time for current beat if let startTime = absoluteStartTime { let beatTime = startTime.addingTimeInterval(timePoints[i]) let beatTimeString = dateFormatter.string(from: beatTime) print("IBI: \(String(format: "%.2f", ibi)) ms at \(beatTimeString)") } self.ibiValues.append(ibi) } } } self.healthStore.execute(seriesQuery) } else { print("No samples found for the specified time range") } } self.healthStore.execute(query) } }

Hi, I’m currently working on an app that utilizes sleep data from HealthKit to provide users with meaningful insights about their sleep. To ensure a smooth user experience, I’d like to understand when sleep data collected by the Apple Watch is saved to the HealthKit store and when it gets synced to the iPhone. Ideally, I want to fetch sleep data right after the user wakes up and opens our app. However, to do this reliably, I need to know the timing of how and when this data becomes available in the iPhone’s HealthKit store. I’ve looked through the official documentation and relevant WWDC sessions but couldn’t find clear information on this topic. If anyone has insights or experience with how and when the Apple Watch syncs HealthKit data—especially sleep records—to the iPhone, I’d greatly appreciate your input. Thanks!

Hello, I’m developing an iOS app that works with sleep data from Apple Watch via HealthKit. I would like to clarify the following: How can an iPhone app detect when a sleep session ends on the Apple Watch? When is sleep data typically written to the HealthKit store on iPhone after sleep ends? Is it immediately after wake-up, or does it depend on certain conditions (e.g., watch charging, connectivity)? Understanding the timing and mechanism of sleep data synchronization is crucial for our app to process accurate and timely health information. Thank you for your assistance.