Should there be separate intents to open each supported file type? Or a single intent, and my code sniffs out the format?

I've got a streaming Radio app that loads an HLS stream into an AVAudioPlayer. I've set up an Intents extension that notifies SiriKit that my app must handle the INPlayMediaIntent in app, and, I'm able to successfully initiate the stream playing from my phone using the string "Play ". My intent handler in app looks like this: completionHandler(INPlayMediaIntentResponse(code: .success, userActivity: nil)) DispatchQueue.main.async { AudioPlayerService.shared.play() } The Audio Player service, in its init, does the following: try AVAudioSession.sharedInstance().setCategory( .playback, mode: .default, policy: .longFormAudio ) Additionally, in my Info.plist, I have the AirPlay optimization policy set to Long Form Audio. Having said all that, when I try to route my app to play "on a given HomePod speaker" ("play on ") the speaker routing instructions are never followed. I've looked and not been able to find where I might be able to instruct my app to follow the correct path here. I was assuming I could not trigger this behavior manually, as I believe I don't really have any control over AirPlay routing. Is there any guidance for working with SiriKit to do the right thing with regards to audio routing?

We use AppShortcutsProvider with a parameterized App Shortcut. One of the entities has a dynamic display title (e.g. "Everyone is searching: {keyword}") that comes from UserDefaults and is returned in EntityQuery.suggestedEntities() and entities(for:). When we change the keyword and call updateAppShortcutParameters(), the Shortcuts app updates and shows the new title. In Spotlight (Siri Suggestions), the displayed title stays on the old value (e.g. still shows "Everyone is searching: 456" after we switched to "123"). On tap, the shortcut runs with the new value (123), so the execution is correct; only the displayed title in Spotlight is stale. Question: Is this expected? Is there any API or recommended approach to invalidate or refresh the Spotlight suggestion so the displayed title matches the current parameter, or should we avoid dynamic titles for the first suggestion for better UX?

I am building an automation using Shortcuts. The shortcut reads text from my Notes, sends it to Apple Intelligence, converts the result into dictionary values, and then saves those values into a Numbers sheet by adding rows through a form. The problem is that when the automation processes multiple lines and adds multiple rows, the Numbers app opens every time a row is added. I would like this process to run automatically at a scheduled time without opening the Numbers app repeatedly on my iPhone. Is there a way to update the Numbers sheet in the background without launching the Numbers app? Please let me know if there is a solution.

I am trying to create an automation that will anable to add transactions to my app and it’s using a shared shortcut and a quick automation on the user end. it works great on the iPhone but i couldn’t find any way to make it work on my Apple Watch… any help with that?

The AppIntent feature is available on tvOS since OS 16. https://developer.apple.com/documentation/appintents I tried a real basic integration where I just want simply open a specific tab in my tabbar. But the perform action gets never called. Is it really possible already to use AppIntent on tvOS? Or is this feature still mostly targeted for mobile devices? Also, the documentaiton says so often something about shortcuts app and features, that are not available on tvOS, that I started doubting that the AppIntent is really usable on tvOS. If AppIntents are available and usable for tvOS, what could be wrong, so that I do not see the expected results?

Bug Report Environment 4× HomePod mini, audioOS 26.4 (23L243) iPhone, iPad, Mac – all running latest OS versions (iOS/iPadOS/macOS 26) iCloud account active, Shortcuts sync enabled on all devices Summary Siri no longer executes custom Shortcuts on any HomePod mini. Instead, the HomePod responds with built-in Siri answers or refers to the internet, as if no custom Shortcuts were registered. The same Shortcuts work correctly via Siri on iPhone, iPad, and Mac. Reproducible Test Case Created a new Shortcut named "Lemon Blue Seven" from scratch – no resemblance to any built-in Siri command, single action: spoken text output. Result: Mac: recognized and executed correctly via Siri iPhone / iPad: recognized and executed correctly via Siri (after re-registration, see below) All 4 HomePod mini: not recognized – Siri responds as if the Shortcut does not exist Steps to Reproduce Create a new Shortcut with a unique name and a single spoken output action Ensure iCloud Shortcuts sync is active on all devices Invoke via Siri on HomePod mini: „Run [Shortcut name]" HomePod responds with a built-in Siri answer instead of executing the Shortcut Additional Observations The issue appeared without any user-initiated changes to the setup Deleting all Shortcuts and re-importing them manually caused Siri registration to also break on iPhone and iPad; this was resolved by disabling iCloud Shortcuts sync, restarting the devices, and re-enabling sync The HomePod issue persisted through this fix – suggesting the HomePod's Intent delegation is broken independently of the hub device's registration state When a Shortcut name resembles a built-in command (e.g. „What time is it?"), the HomePod executes the built-in command instead – confirming it does not consult the user's Shortcut registry at all Troubleshooting Already Performed Multiple HomePod restarts Full factory reset and re-setup of HomePod (multiple times, also tested with only one HomePod active) Voice recognition re-trained Personal Requests disabled and re-enabled iCloud Shortcuts sync disabled on all devices, devices restarted, sync re-enabled sequentially All Shortcuts deleted and manually re-imported Home Hub verified: Bathroom HomePod registered as Home Hub, status „Connected" Tested with a separate Home setup Contacted Apple Support – no resolution provided Expected Behavior Siri on HomePod mini recognizes and executes user-defined Shortcuts by name, as it did prior to this issue and as it continues to do on iPhone, iPad, and Mac. Actual Behavior Siri on HomePod mini ignores user-defined Shortcuts entirely and falls back to built-in responses.

While I was creating a shortcut using the dictionary function I encountered a bug. When creating a new dictionary to store the date and some other stuff I set a value to the current date variable. I went to change the date format to one I preferred I was unable to access the submenu to do so. To figure out what was going on I did some testing and here is what I found: You can't access the submenu of any inserted variable This only happens in newly created dictionaries You can be fix the dictionary by simply closing and opening the shortcut This bug does not happen on Iphone How to make this bug happen: Open any shortcut Create a new dictionary Add a variable in the value field You can no longer access the sub menu to edit the variable.

Hello. How to write this command correctly on a Macbook, in the script editor, so that I can click the "Run script" button and the script will give the result: if there is no folder, then report that there is no folder, if there is a folder, then report that the folder exists. do shell script "test -d 'Users/user/Desktop/New folder'" Now, if the folder exists, an empty string ("") is returned, if the folder does not exist, the script editor reports that an error has occurred. In general, my task is to write a script that checks the existence of a folder.

I am trying to implement URLRepresentableEntity on my AppEntity I am following along with the WWDC video here All compiles fine when I use the ID as in the video: extension SceneEntity: URLRepresentableEntity { static var urlRepresentation: URLRepresentation { "https://example.com/scene/\(.id)" } } but my URLs need to use a different property on the Entity. The WWDC video clearly states: "Notice that I'm using the entity’s identifier as an interpolated value. You can use an entity’s ID or any of its properties with the @Property attribute as interpolations in the URL string." So I annotated my entity with the @Property attribute and expected that to work but it doesn't compile. struct SceneEntity: AppEntity { let id: UUID @Property(title: "Slug") var slug: String } extension SceneEntity: URLRepresentableEntity { static var urlRepresentation: URLRepresentation { "https://example.com/scene/\(.slug)" } } Type 'EntityURLRepresentation.StringInterpolation.Token' has no member 'slug' How can I use this API with a property that is not the ID?

how to register more than 10 shortcuts

(Public dupe of FB16477656) The Shortcuts app allows you to parameterise the input for an action using variables or allowing "Ask every time". This option DOES NOT show when conforming my AppEntity.defaultQuery Struct to EntityStringQuery: But it DOES shows when confirming to EntityQuery: As discussed on this forum post (or FB13253161) my AppEntity.defaultQuery HAS TO confirm to EntityStringQuery to allow for searching by String from Siri Voice input. To summarise: With EntityQuery: My Intent looks like it supports variables via the Shortcuts app. But will end up in an endless loop because there is no entities(matching string: String) function. This will allow me to choose an item via the Shorcuts.app UI With EntityStringQuery: My Intent does not support variables via the Shortcuts app. I am not allows to choose an item via the Shorcuts.app UI. Even weirder, if i set up the shortcut with using a build with EntityQuery and then do another build with EntityStringQuery it works as expected. Code: /* Works with Siri to find a match, doesn't show "Ask every time" */ public struct WidgetStationQuery: EntityStringQuery { public init() { } public func entities(matching string: String) async throws -> [Station] { let stations = [Station(id: "car", name: "car"), Station(id: "bike", name: "bike")] return stations.filter { $0.id.lowercased() == string.lowercased() } } public func entities(for identifiers: [Station.ID]) async throws -> [Station] { let stations = [Station(id: "car", name: "car"), Station(id: "bike", name: "bike")] return stations.filter { identifiers.contains($0.id.lowercased()) } } public func suggestedEntities() async throws -> [Station] { return [Station(id: "car", name: "car"), Station(id: "bike", name: "bike")] } public func defaultResult() async -> Station? { try? await suggestedEntities().first } } /* DOES NOT work with Siri to find a match, but Shortcuts shows "Ask every time" */ public struct WidgetBrokenStationQuery: EntityQuery { public init() { } public func entities(matching string: String) async throws -> [Station] { let stations = [Station(id: "car", name: "car"), Station(id: "bike", name: "bike")] return stations.filter { $0.id.lowercased() == string.lowercased() } } public func entities(for identifiers: [Station.ID]) async throws -> [Station] { let stations = [Station(id: "car", name: "car"), Station(id: "bike", name: "bike")] return stations.filter { identifiers.contains($0.id.lowercased()) } } public func suggestedEntities() async throws -> [Station] { return [Station(id: "car", name: "car"), Station(id: "bike", name: "bike")] } public func defaultResult() async -> Station? { try? await suggestedEntities().first } }```

I'm currently trying to use the new @UnionValue macro. From what I understood, it allows multiple types for a parameter. I created the following enum: @UnionValue enum IntentDuration { case int(Int) case duration(Measurement<UnitDuration>) } Then, I tried to use it in the following AppIntent: struct MyIntent: AppIntent { static let title: LocalizedStringResource = "intent.title" static let description = IntentDescription("intent.description") static let openAppWhenRun: Bool = true @Parameter var duration: IntentDuration @Dependency private var appManager: AppManager @MainActor func perform() async throws -> some IntentResult { // My action return .result() } } However, I get the following error from Xcode at the @Parameter line: 'init()' is unavailable Did I wrongly understand how this works? Is there another way to accept multiple types for a parameter? I didn't manage to find any docs on this.

On iOS 18, I'm trying to index documents in Spotlight using the new combination of AppIntents+IndexedEntity. However, I don't seem to be able to index the textContent of the document. Only the displayName seems to be indexed. As recommended, I start with the defaultAttributeSet: /// I call this function to index in Spotlight static func indexInSpotlight(document: Document) async { do { if let entity = document.toEntity { try await CSSearchableIndex.default().indexAppEntities([entity]) } } catch { DLog("Spotlight: could not index document: \(document.name ?? "")") } } /// This is the corresponding IndexedEntity with the attributeSet @available(iOS 18, *) extension DocumentEntity { var attributeSet: CSSearchableItemAttributeSet { let attributeSet = defaultAttributeSet attributeSet.title = title attributeSet.displayName = title attributeSet.textContent = docContent attributeSet.thumbnailData = thumbnailData attributeSet.kind = "document" attributeSet.creator = Constants.APP_NAME return attributeSet } } How can I have more that the displayName to be indexed? Thanks :-)

I am on MacOS 15.5 trying to access tmutil latestbackup in AppleScript: set latestBackup to do shell script "tmutil latestbackup" It works perfect when run from script editor, and script editor is in full disk access permission list. When I export to an app and run it it fails with: Error retrieving latest backup: tmutil: latestbackup requires Full Disk Access privileges. To allow this operation, select Full Disk Access in the Privacy tab of the Security & Privacy preference pane, and add Terminal to the list of applications which are allowed Full Disk Access. Error code: 80 Terminal is on list, as is name of the app. I have same issue running in safe mode. I have tried deleting and redefining full disk access entries, all to no avail. Apple tech support says its a developer issue, but code works in script editor. any ideas?

Was going to add a shortcut to an app via INIntent. I followed the WWDC developer.apple.com/videos/play/wwdc2021/10232/?time=986 Steps: Created a .intentdefinition file and created an intent. Added the intent to .intentdefinition and compiled the app. Import the header file for the custom intent in the AppDelegate MyIntentname.h Have the AppDelegate conform to the protocol created in the generated code. Implement: -application:handlerForIntent: and return self (the app delegate) Run the app. Open the Shortcuts app and search for the 'shortcut' (according to the WWDC video linked above it should show up in the actions list). Doesn't show up in the list. I tried moving the build application out from Debug to my Applications folder to see if that would help the Shortcuts app find it, but it didn't. Am I missing a step/doing something wrong?

I ran the following script while both VSCode and Windsurf were open. tell application "System Events" set electronProcesses to every application process whose name is "Electron" set outputText to "" repeat with p in electronProcesses set outputText to outputText & "Process: " & name of p set outputText to outputText & ", Displayed name: " & displayed name of p set outputText to outputText & ", Frontmost: " & frontmost of p & " " end repeat return outputText end tell The script incorrectly returned two Electron processes, where both were showing Windsurf as the displayed name. The output of the above script is: Process: Electron, Displayed name: Windsurf, Frontmost: false Process: Electron, Displayed name: Windsurf, Frontmost: false Separately, both Windsurf and VSCode share the same process name (Electron) but have different displayed names. This issue appears to affect how the frontmost application is detected, when using the following script: set frontApp to first application process whose frontmost is true The frontApp is incorrectly returned when switching between VSCode and Windsurf.

I'm developing an iOS app that uses Siri Shortcuts to enhance the user experience. Currently, I have implemented functionality that allows users to perform certain actions via Siri Shortcuts. My team wants to improve the user experience by giving an instructional audio prompt (e.g., "say 'hey Siri [action name]' if you want to [perform action]") to users. However, we want to ensure this prompt is only played when the user has already enabled Siri Shortcuts. The challenge is determining whether Siri Shortcuts are properly enabled before suggesting their use. We want to avoid situations where users follow our audio instructions to use Siri, only to discover that Siri Shortcuts aren't properly configured on their device. Since we're using Siri Shortcuts for this feature, the standard requestSiriAuthorization(_:) method doesn't apply to our use case(It said You don’t need to request authorization if your app only supports actions in the Shortcuts app. in https://developer.apple.com/documentation/sirikit/requesting-authorization-to-use-siri). What is the recommended approach to verify that Siri Shortcuts are properly enabled before prompting users to interact with them? Is there a reliable way to check this status(should be the bool value of the toggle in the pic below) programmatically? Thank you for your assistance.

Add NSUserActiveTypes -&gt;INSendMessage Intent to info. plist. Starting the app on watchos will handoff Outlook on Mac? Normal on iOS.

I have an app that lets you create cars. I have a CarEntity, an OpenCarIntent, and a CreateCarIntent. I want to support the Open When Run option when creating a car. I understand to do this, you just update the return type of your perform function to include & OpensIntent, then change your return value to include opensIntent: OpenCarIntent(target: carEntity). When I do this, I get a compile-time error: Cannot convert value of type 'CarEntity' to expected argument type 'IntentParameter<CarEntity>' What am I doing wrong here? struct CreateCarIntent: ForegroundContinuableIntent { static let title: LocalizedStringResource = "Create Car" @Parameter(title: "Name") var name: String @MainActor func perform() async throws -> some IntentResult & ReturnsValue<CarEntity> & OpensIntent { let managedObjectContext = PersistenceController.shared.container.viewContext let car = Car(context: managedObjectContext) car.name = name try await managedObjectContext.perform { try managedObjectContext.save() } let carEntity = CarEntity(car: car) return .result( value: carEntity, opensIntent: OpenCarIntent(target: carEntity) // FIXME: Won't compile ) } } struct OpenCarIntent: OpenIntent { static let title: LocalizedStringResource = "Open Car" @Parameter(title: "Car") var target: CarEntity @MainActor func perform() async throws -> some IntentResult { await UIApplication.shared.open(URL(string: "carapp://cars/view?id=\(target.id)")!) return .result() } }