On an iOS 18 device, after installing the application and initially denying local network permission when prompted, manually enabling this permission in the system settings does not resolve the issue. After uninstalling and reinstalling the app, although local network access is granted, the app cannot discover smart hardware devices over the local area network (LAN) or proceed with configuration. The smart hardware sends configuration data packets over the LAN, but the app fails to receive these packets. This issue persists even after another uninstall and reinstall of the app. However, rebooting the device restores normal functionality. Steps to Reproduce: Install the application on an iOS 18 device. Upon first launch, deny the request for local network permissions. Manually enable local network permissions via "Settings" > [App Name]. Uninstall and then reinstall the application. Attempt to discover and configure smart hardware devices using the app. Notice that the app fails to receive configuration data packets sent by the smart hardware over the LAN. Expected Result: The application should be able to normally receive configuration data packets from smart hardware devices over the LAN and successfully complete the configuration process after obtaining local network permissions. Actual Result: Even after being granted local network permissions, the application cannot discover devices or receive configuration data packets over the LAN unless the iPhone device is rebooted. (reinstall app and obtaining local network permissions is not work too.)

Hi All, I am looking for a terminal command to get the exact same output as the file count you recieve when using Get Info in finder. The closest i can get is using the find command with flags: find 'path/to/folder' -not -path '*/\.*' -and -not -path '*\.key/*' -and -not -path '*\.numbers/*' -and -not -path '*\.pages/*' -and -not -path '*__MACOSX/*' -and -not -path '*\.pdf/*' -and -not -path '*\.app/*' -and -not -path '*\.rtfd/*' | wc -l I will be searching on an external volume that sometimes produces keynote save files that finder sometimes sees as a package and sometimes sees as a folder. If a folder finder counts the items contained if a package it doesn't, I need the command or script to mimic this behaviour. In the example of the screenshot get info on the top folder produces a count of 14 and the find command produces a count of 23. There are also other behaviours that differ the file count between them but i'm not sure what causes them. Any help on a solution it being a command or script would be much apreciated. Thanks, James

Im building a small iphone app with StoreKit and currently testing it in testflight right on my mac, not on iphone. StoreKit part almost exactly copied from SKDemo from one of the Apple's WWDC. For some users and for myself Transaction.currentEntitlements always returns .unverified results. I double-checked Apple Connect settings, i checked my internet connection and everything is fine. Is there some pitfalls for testflight on mac? How can I find out what is causing this problem?

I am getting report of a crash occurring, while doing a NFC HCE CardSession. The swift code is mostly the same as the example from the CardSession docs: @objc func deviceSupportsNFC (_ call: CAPPluginCall) { call.keepAlive = true let supportsNFCCallbackId = call.callbackId! Task() { guard NFCReaderSession.readingAvailable, CardSession.isSupported, // <-- line 86 await CardSession.isEligible else { print(TAG + " HCE not allowed/available") var support = JSObject() support["supported"] = false; let callback = bridge?.savedCall(withID: supportsNFCCallbackId) call.resolve(); callback?.resolve(support); return; } print(TAG + " HCE allowed") var support = JSObject() support["supported"] = true; let callback = bridge?.savedCall(withID: supportsNFCCallbackId) call.resolve(); callback?.resolve(support); } } Calling it from my plugin, to verify if (HCE) NFC is supported: if(await deviceInfoService.isIos()) { if(iosSupportEnabled === false) { console.log("NfcHceService:iOS but disabled"); return; } this.requiresManualTrigger = true; DfsNfcHce.deviceSupportsNFC((supportObj) => { const support = supportObj?.supported ?? false; this.hceSupported = support; }); } else { this.hceSupported = true; } The crash report i get via Crashlytics is below. It's specifying the error occurs at line 86 (marked it in my code above) The error seems to be in the CoreNFC (NFCHardwareManager areFeaturesSupported). # Crashlytics - Stack trace # Application: com.wodanbrothers.dyflexis # Platform: apple # Version: 2025.04.101356 (1744977392) # Issue: c3a293fbfa73c64f59f92c4b4cdfeb83 # Session: 5c64465c452c41e3abb1ba9f970b54c0_DNE_0_v2 # Date: Wed May 07 2025 07:56:11 GMT+0200 (Central European Summer Time) Fatal Exception: NSInvalidArgumentException 0 CoreFoundation 0x11a2ec __exceptionPreprocess 1 libobjc.A.dylib 0x31a7c objc_exception_throw 2 CoreFoundation 0x18467c +[NSObject(NSObject) _copyDescription] 3 CoreFoundation 0x31b84 ___forwarding___ 4 CoreFoundation 0x314f0 _CF_forwarding_prep_0 5 CoreNFC 0x2ac40 -[NFCHardwareManager areFeaturesSupported:outError:] 6 CoreNFC 0x2b184 -[NFCHardwareManager areFeaturesSupported:expiry:completion:] 7 CoreNFC 0x2f9d8 block_destroy_helper.5 8 Dyflexis 0x5c08 closure #1 in DfsNfcHcePlugin.deviceSupportsNFC(_:) + 86 (DfsNfcHcePlugin.swift:86) 9 Dyflexis 0x7f8d <deduplicated_symbol> 10 Dyflexis 0x7725 specialized thunk for @escaping @isolated(any) @callee_guaranteed @async () -> (@out A) (<compiler-generated>) 11 Dyflexis 0x77fd <deduplicated_symbol> 12 libswift_Concurrency.dylib 0x65241 completeTaskWithClosure(swift::AsyncContext*, swift::SwiftError ... Crashed: com.google.firebase.crashlytics.ios.exception 0 FirebaseCrashlytics 0x1b658 FIRCLSProcessRecordAllThreads + 172 1 FirebaseCrashlytics 0x1ba64 FIRCLSProcessRecordAllThreads + 1208 2 FirebaseCrashlytics 0x13adc FIRCLSHandler + 48 3 FirebaseCrashlytics 0xe9d4 __FIRCLSExceptionRecord_block_invoke + 92 4 libdispatch.dylib 0x1b584 _dispatch_client_callout + 16 5 libdispatch.dylib 0x11728 _dispatch_lane_barrier_sync_invoke_and_complete + 56 6 FirebaseCrashlytics 0xe260 FIRCLSExceptionRecord + 204 7 FirebaseCrashlytics 0xe4f8 FIRCLSExceptionRecordNSException + 452 8 FirebaseCrashlytics 0xdeb8 FIRCLSTerminateHandler() + 396 9 libc++abi.dylib 0x158b4 std::__terminate(void (*)()) + 16 10 libc++abi.dylib 0x18e1c __cxa_get_exception_ptr + 86 11 libc++abi.dylib 0x18dc4 __cxxabiv1::failed_throw(__cxxabiv1::__cxa_exception*) + 90 12 libobjc.A.dylib 0x31be4 objc_exception_throw + 448 13 CoreFoundation 0x18467c +[NSObject(NSObject) _copyDescription] + 362 14 CoreFoundation 0x31b84 ___forwarding___ + 1492 15 CoreFoundation 0x314f0 _CF_forwarding_prep_0 + 96 16 CoreNFC 0x2ac40 -[NFCHardwareManager areFeaturesSupported:outError:] + 364 17 CoreNFC 0x2b184 -[NFCHardwareManager areFeaturesSupported:expiry:completion:] + 96 18 CoreNFC 0x2f9d8 block_destroy_helper.5 + 8028 19 Dyflexis 0x5c08 closure #1 in DfsNfcHcePlugin.deviceSupportsNFC(_:) + 86 (DfsNfcHcePlugin.swift:86) 20 libswift_Concurrency.dylib 0x5c134 swift::runJobInEstablishedExecutorContext(swift::Job*) + 292 21 libswift_Concurrency.dylib 0x5d5c8 swift_job_runImpl(swift::Job*, swift::SerialExecutorRef) + 156 22 libdispatch.dylib 0x13db0 _dispatch_root_queue_drain + 364 23 libdispatch.dylib 0x1454c _dispatch_worker_thread2 + 156 24 libsystem_pthread.dylib 0x4624 _pthread_wqthread + 232 25 libsystem_pthread.dylib 0x19f8 start_wqthread + 8 ...

We’ve recently encountered an increased rate of purchase errors StoreKit.InvalidRequestError error 1 (https://developer.apple.com/documentation/storekit/invalidrequesterror) specifically on iOS 18.4. We suspect this might be related to the new Advanced Commerce API introduced by Apple, although we haven’t made any changes related to this API in our app. Have you experienced similar issues since the release of iOS 18.4 or when integrating the Advanced Commerce API? Any insights or suggestions would be greatly appreciated. Thanks!

Hello, We have a SwiftUI-based application that runs as a LaunchAgent and communicates with other internal components using Unix domain sockets (UDS). On Sequoia (macOS virtualized environment), when installing the app, we encounter the Local Network Privacy Alert, asking: "Allow [AppName] to find and connect to devices on the local network?" We are not using any actual network communication — only interprocess communication via UDS. Is there a way to prevent this system prompt, either through MDM configuration or by adjusting our socket-related implementation? Here's a brief look at our Swift/NIO usage: class ClientHandler: ChannelInboundHandler { ... public func channelRead(context: ChannelHandlerContext, data: NIOAny) { ... } ... } // init bootstrap. var bootstrap: ClientBootstrap { return ClientBootstrap(group: group) // Also tried to remove the .so_reuseaddr, the prompt was still there. .channelOption(ChannelOptions.socketOption(.so_reuseaddr), value: 1) .channelInitializer { channel in // Add ChannelInboundHandler reader. channel.pipeline.addHandler(ClientHandler()) } } // connect to the UDS. self.bootstrap.connect(unixDomainSocketPath: self.path).whenSuccess { (channel) in .. self.channel = channel } ... ... // Send some data. self.channel?.writeAndFlush(buffer).wait() Any guidance would be greatly appreciated.

I am using the public url https://api.storekit-sandbox.itunes.apple.com/inApps/v1/notifications/jwsPublicKeys to get the jwks keys to verify the signed payload for store kit payments. I am checking Apple server notifications. const APPLE_JWKS_URL = "https://api.storekit-sandbox.itunes.apple.com/inApps/v1/notifications/jwsPublicKeys" // Apple JWK set (cached by jose) const appleJWKS = createRemoteJWKSet(new URL(APPLE_JWKS_URL)); const jwks = await appleJWKS(); logger.debug("Apple JWKS Keys: %O", jwks); // Log the keys if (!signedPayload) { // return res.status(400).json({ error: "Missing signedPayload" }); } // Step 1: Verify JWS (signature + payload) using Apple's JWKS const { payload, protectedHeader } = await jwtVerify( signedPayload, appleJWKS, { algorithms: ["ES256"], // Apple uses ES256 for signing } );

I am aware the USB / HID devices can come and go, if you have a long running application that's what you want to monitor. But for a "one-shot" command-line tool for example, I would like to enumerate the devices present on a system at a certain point in time, interact with a subset of them (and this interaction can fail since the device may have been disconnected in-between enumerating and me creating the HIDDeviceClient), and then exit the application. It seems that HIDDeviceManager only allows monitoring an Async[Throwing]Stream which provides the initial devices matching the query but then continues to deliver updates, and I have no idea when this initial list is done. I could sleep for a while and then cancel the stream and see what was received up to then, but that seems like the wrong way to go about this, if I just want to know "which devices are connected", so I can maybe list them in a "usage" or help screen. Am I missing something?

Hey folks! In one of our apps we're using the FamilyControls framework to manage the screentime for the child. The app requires the Guardian to activate a subscription on his/her device to enable the functionality for the Child on the child device. We're currently using StoreKit 2 to get notified when there is an active subscription. The issue we're seeing (and our users) is that an activated subscription isn't instantly propagated to the Family members, in this case the device belonging to the child. Is this a known bug, and are the possible any workarounds? Currently we have to ask our users to "Restore Purchase" or wait minutes/hours for the app to active, which isn't a viable solution. We want it to "just work" :) Sincerely, César Pinto Castillo Ambi Studio

We have a VPN app built using PacketTunnelProvider and support per-app VPN on iOS. We're currently investigating an issue specific to per-app VPN configurations that use split tunneling, where some URLs are routed through the VPN tunnel while others are intended to go directly. Tunneled traffic works as expected. However, for direct traffic, we observe intermittent failures where the browser does not receive an ACK, leading to repeated retransmissions and eventual page load failures. This issue appears only in per-app VPN scenarios, and we've reproduced it across multiple MDM solutions (Intune, CEM) and multiple managed browsers. It's intermittent but frequently reproducible with common public URLs routed directly. Key observations: writePackets returns true, confirming the VPN app writes packets to the TUN interface. Despite that, the browser often fails to acknowledge receipt (no ACK), suggesting it may not receive the packet at all. We suspect a possible packet loop, where packets written to TUN are immediately read back by the app. However, due to the intermittent nature of the issue, this is hard to confirm. A consistent loop would likely result in persistent failures, not sporadic ones. We are attaching: A Wireshark summary - highlighting the missing ACK and retransmission pattern. As we cannot attach the xlsx file or a zip file, we have took the screenshots of the files names as image1, image2, image3, image4 and image5 in sequence. Dails on the iOS device and MDM environment. NETunnelProviderProtocol configuration that reproduces the issue Any guidance on how to further debug this, particularly on confirming packet delivery to the browser and identifying potential loops would be greatly appreciated. Thank you. e t

I have the following lines of code to access data through CoreData. import Foundation import CoreData import CloudKit class CoreDataManager { static let instance = CoreDataManager() let container: NSPersistentCloudKitContainer let context: NSManagedObjectContext init() { container = NSPersistentCloudKitContainer(name: "ABC") container.loadPersistentStores(completionHandler: { (storeDescription, error) in if let error = error as NSError? { print(error.userInfo) } }) context = container.viewContext context.automaticallyMergesChangesFromParent = true context.mergePolicy = NSMergePolicy(merge: .mergeByPropertyObjectTrumpMergePolicyType) } func save() { do { try container.viewContext.save() print("Saved successfully") } catch { print("Error in saving data: \(error.localizedDescription)") } } } I have confirmed that I can share data between iPhone and iPad. Now, I need to use AppGroup as well. I have changed my code as follows. import Foundation import CoreData import CloudKit class CoreDataManager { static let shared = CoreDataManager() let container: NSPersistentContainer let context: NSManagedObjectContext init() { container = NSPersistentCloudKitContainer(name: "ABC") container.persistentStoreDescriptions = [NSPersistentStoreDescription(url: FileManager.default.containerURL(forSecurityApplicationGroupIdentifier: "some group name")!.appendingPathComponent("CoreDataMama.sqlite"))] container.loadPersistentStores(completionHandler: { (description, error) in if let error = error as NSError? { print("Unresolved error \(error), \(error.userInfo)") } }) context = container.viewContext context.automaticallyMergesChangesFromParent = true context.mergePolicy = NSMergePolicy(merge: .mergeByPropertyObjectTrumpMergePolicyType) } func save() { do { try container.viewContext.save() print("Saved successfully") } catch { print("Error in saving data: \(error.localizedDescription)") } } } Other files being unaltered, my sample apps aren't sharing data. What am I doing wrong? Just FYI, I'm using actual devices. Thank you for your reading this topic.

Hello, I am trying to get space which is consumed by APFS volume. The call getattrlist() works fine on macOS 15 (Apple silicon). However, it returns EINVAL on macOS 11.7.10 (Intel) if ATTR_VOL_SPACEUSED is defined. struct VolAttrBuf { u_int32_t length; off_t spaceUsed; } __attribute__((aligned(4), packed)); int64_t GetVolumeSpaceUsed(const std::string& mountPath) { struct attrlist attrList; std::memset(&attrList, 0, sizeof(attrList)); attrList.bitmapcount = ATTR_BIT_MAP_COUNT; attrList.volattr = ATTR_VOL_INFO | ATTR_VOL_SPACEUSED; VolAttrBuf attrBuf; if (getattrlist(mountPath.c_str(), &attrList, &attrBuf, sizeof(attrBuf), 0) || attrBuf.length > sizeof(attrBuf)) { std::cout << "getattrlist() failed with errno (" << errno << ")" << std::endl; return -1; } return attrBuf.spaceUsed; } Is it bug or ATTR_VOL_SPACEUSED is unsupported on macOS 11? Are there any other way to get space which is used on an APFS volume? (C++) Thank you in advance, Pavel

Hi all, I would like to know if kext consent can still be disabled on Apple Silicon Macs. I tried spctl kext-consent disable in recovery OS, but after rebooting spctl kext-consent status still returns ENABLED. Is this command disabled or something?

Hello, I added a printer using lpadmin command. ` lpadmin "-p", "print_queue", "-D", "print queue", "-P", "temp/data/driver.ppd", "-E", "-o", "printer-error-policy=abort-job", "-o", "printer-is-shared=false", "-o", "cupsIPPSupplies=false", "-o", "cupsSNMPSupplies=false", "-o", "ColorModel=Color", "-o", "Media=A3", "-o", "OutputPaperSize=A3" then I set default printing options for your user account via lpoptions `lpoptions "-p", "print_queue", "-o", "Duplex=DuplexNoTumble", "-o", "Media=A3" But still default values in system print dialog are set to a4 and grayscale. Why? Is there any way how to change it to correspond with values set by these commands? Also tried to change driver files defaults, but again, nothing.

send a request and it returns with timeout Integration Team are Using Fortigate as a firewall and NGINX for some reasons so we use VPN TO Access , requests always succeed but at once it failed with timeout in randomize request not specific one we are using URLSession as a network layer when I retry the same failed request again, it success the request cannot connect apigee Sec Team concern { app session hits the security gateway with lots of SYN step to try to initiate a new session and doesn’t wait for (SYN-ACK / ACK) steps to happen to make sure the connection initiated correctly and gateway consider it flooding attack }

If a notification: ONE_TIME_CHARGE is used to ship the IAP content, it involves a point where the client might not finish the transaction, yet the item is shipped. Will an unfinished purchase affect refunds?

Hi there. How can I do for the title? URLRequest seems not to have property for protocols. NSURLSessionWebSocketTask seems to have either URLRequest or protocols, but have neither of them. What I want to do is setting both protocols and headers when using WebSocket. Should I use Network.framework instead?

We are currently working on deploying a Java Card applet onto the eSIM (eUICC) inside an iPhone. According to the GSMA SGP specifications, the eUICC is expected to support Java Card 3.0.5 Classic Edition. As defined in the Java Card 3.0.5 specification, the javacardx.crypto package should support standard algorithms including MessageDigest.ALG_HMAC_SHA_512. However, during our testing on the iPhone's embedded eSIM, we found that ALG_HMAC_SHA_512 appears to be unsupported or disabled. The same applet functions correctly on external Java Card platforms that support Java Card 3.0.5, leading us to believe that this is a restriction specific to the iPhone’s eUICC implementation. Our main questions are: Why is ALG_HMAC_SHA_512, which is part of the standard Java Card 3.0.5 specification, not available on the iPhone eSIM? Has Apple imposed any internal restrictions or exclusions on certain crypto algorithms for security, performance, or compliance reasons? Is there a list or documentation of supported and unsupported Java Card APIs or algorithms on the eUICC used in iPhones? Any insights from Apple engineers or other developers with experience on this topic would be greatly appreciated. Thank you in advance!

Hello, I'm running into an issue while developing an iOS app that requires local network access. I’m using the latest MacBook Air M4 with macOS sequoia 15.5 and Xcode 16.1. In the iOS Simulator, my app fails to discover devices connected to the same local network. I’ve already added the necessary key to the Info.plist: NSLocalNetworkUsageDescription This app needs access to local network devices. When I run the app on a real device and M2 Chip Macbook's simulators, it works fine for local network permission as expected. However, in the M4 Chip Macbook's Simulator: The app can’t find any devices on the local network Bonjour/mDNS seems not to be working as well I’ve tried the following without success: Restarting Simulator and Mac Resetting network settings in Simulator Confirming app permissions under System Settings > Privacy & Security Has anyone else encountered this issue with the new Xcode/macOS combo? Is local network access just broken in the Simulator for now, or is there a workaround? Thanks in advance!

Dear Apple Support Team, We are currently implementing auto-renewable subscriptions in our iOS app and are testing the integration using the sandbox environment. On the iOS app side, the in-app purchase flow completes successfully and displays a "Purchase Successful" message. However, we are not receiving any server notification callbacks on our configured App Store Server Notifications (Sandbox) webhook URL. For your reference, the webhook URL we have set in App Store Connect (Sandbox) is: https://9c0f-182-79-123-254.ngrok-free.app/ios/webhook Despite successfully completing a subscription purchase in the sandbox, there is no evidence that the webhook is being triggered. We would appreciate your guidance in resolving this issue or confirming if there are any additional configurations or steps required on our end.