So I have an M3 Max MBP which I was planning on taking out to use while my son had his 4-hours-long archery class, but I've been using the Studio (running Tahoe) for development, and the version of Xcode running on there is too new for the version running on the MBP. So I try to update the MBP, but Settings thinks it's up to date: This is an M3 Max... so that seems ... unlikely. I've tried rebooting the thing, I've tried clicking any number of times on the 'check for updates' button, but no joy. Anyone got any pointers ?

Apple son güncellemeden sonra saatiyle bağlantı kurmuyor bu çevremdeki herkesin yaşadığı bir sorun

Problem Description DP extended display: When hot-plugging the downstream DP port, there is no audio output. (Occurs randomly) 2. Setup Condition The product is connected to the following platform: Platform: Apple MacBook Pro (16-inch, M4 Max, 2024) The DP port is connected to the following monitor: 3. Reproduction Procedure Step 1: Connect the DP port to the extended display ASUS VP28U (4K 60Hz) Step 2: Connect the platform Apple MacBook Pro (16-inch, M4 Max, 2024) Step 3: Hot-plug the downstream DP port → no audio output (random occurrence) Bug Description DP extended display: When hot-plugging the downstream DP port, there is no audio output. (Random) Affected Platform & Monitor Combination Apple MacBook Pro (16-inch, M4 Max, 2024) & Samsung S32BG850NC (4K 240Hz) Vendor Anaysis: After analysis, we found that the issue also fails when the host is directly connected to the monitor (tested with two different USB-C to DP cables, both showing the same failure). The RTS5490 only bypasses the audio and video signals, and no abnormal behavior was observed in the logs. In addition, we found that different behaviors occur when switching the monitor OSD between DP 1.1 and DP 1.2: OSD set to DP 1.1: Direct connection: Pass Connected through RTS5490: Pass OSD set to DP 1.2: Direct connection: Fail Connected through RTS5490: Fail (same issue reported by Tongxing) Testing with other monitors does no

Problem Description When the Type-C port is connected to an ASUS ROG Swift OLED PG32UCDM monitor set to 3840×2160 @ 120 Hz, and the DP port is connected to a Samsung U28E590D monitor set to 3840×2160 @ 60 Hz, the DP port shows no response and no video output after the system wakes from sleep. The DP monitor is not detected. Reproduction Steps Apple MacBook Pro (14-inch ,2024) connect the DP port to Samsung U28E590D and set the resolution to 3840×2160 @ 60 Hz. Connect the Type-C port to ASUS ROG Swift OLED PG32UCDM and set the resolution to 3840×2160 @ 120 Hz. Put the platform into sleep mode, then wake it up. After wake-up, the DP port has no response and no video output. Bug Description When the Type-C port is connected to an ASUS ROG Swift OLED PG32UCDM at 3840×2160 @ 120 Hz, and the DP port is connected to a Samsung U28E590D at 3840×2160 @ 60 Hz, the DP port fails to output video after system sleep and wake-up, and the monitor is not detected.

Problem description: Connected to a Sharp 8TC60DWTX (8K) display, but unable to select 4K resolution Setup Condition Apple MacBook Pro 16-inch M4 Max Sharp 8TC60DWTX (8K) 3.Duplicate Procedure After connecting to 8K MNT and select 4K solution, it still display as 8K. Vendor analysis: 8K60 shows no image; switching to 30 Hz works normally → After analysis, we found that the 8K60 timing output from the MacBook is incorrect. The horizontal blanking (H-CBlanking) is too small to accommodate the audio data, so the RTD2191E does not output video to the monitor. → This issue does not occur on Windows platforms, confirming that this is a host-side issue.

Hi everyone, my Digital Services Act (DSA) status in App Store Connect has been “In Review” for over a week. Is this normal? The app is already available in 178 countries, but it can’t be released in the EU (my home market) solely because this DSA isn’t approved yet. How long did it take for you? Is there anything that helps speed up the DSA review? Thanks for any insights.

one of my app users cancelled the subscription from settings. After that, she tried to buy the subscription from app which she could not as I receive same transaction id and previous exp date.

After updating the Xcode 26, defined universal links are not working in the iOS simulator. In the configuration, we have verified all the things including AASA file hosting and domain configuration. It is working properly in the real devices. Issue occurring only for Simulators. How can I debug it in the simulators to validate this ? Xcode Version: 26.1 Simulator iOS: 26.1

I have a Macbook and a Mac Mini at home, connected with Universal Control. When I copy-paste some big group of files (say, 250GB of photos) the OS creates a copy of all those files under shared-clipboard in Library (filling up disk space in short time) even if I don't even move the cursor to other devices. It doesn't even delete those files and clear up disk space even after I paste it. This is a design flaw, it shouldn't be like this.

When I try to create a post in Apple Support Community, it forces me to create a new account (for some supersmart reason because my apple account is apparently not enough). In this process, I am required to pick a new username and choose my communications preferences. The next screen? 403 Forbidden Error page.

Regardless of how long my Mac has been running, clicking on the Messages app causes it to bounce repeatedly. Eventually, it stops and behaves as if it has opened, but sometimes it doesn’t open at all. When it does open, the messages either don’t sync or take several hours to load. Most of the time, the last synced messages are over a week old. Occasionally, I can only message certain people from my Mac. If I attempt to text someone from my Mac, it freezes completely, requiring me to force quit. Interestingly, I don’t encounter any issues between my iPhone 16 Pro Max and iPad Pro. Both my iPhone and iPad are running the latest macOS betas.

I'm developing an App, a function is through the bluetooth firmware upgrade. there is a problem now. when I send data via bluetooth, App into the background, the data sent to immediately stop, peripheralIsReadyToSendWriteWithoutResponse will not be invoked, At the same time canSendWriteWithoutResponse always returns false. When I open the App again, peripheralIsReadyToSendWriteWithoutResponse still will not be invoked, canSendWriteWithoutResponse or returns false. I have set Acts as a Bluetooth LE accessory and Uses Bluetooth LE accessories. Is there a good way to send data to the device when my App goes into the background?

I never come to post or something like this on board. if I have something I will use on call and sent on suggestion i‘ve suggestion on call to Apple care in thailand and I have Apple care+ but not support same us and another pls call I need some of sugesstion for correct and I’m lost on I prepare on cloud back up for 20 year to use on Apple to Apple ,Microsoft to Microsoft ,Android to Android I don’t need to tran and I interment if I do i accepted in that if regarding my bio is incorretc it’s only because I lost in court case in thailand and in India I‘ve fraind and good relation from “Defendent“ on my case and I thing I’m not supid because on that time my company is only registeration in Thailand than i can’t to other under India law because it’s just registered that I‘ve project regarding “ Make IOS and Mac OS watch os “ in rental and use MDM on correct and I think is only use on ownership is correcty on the asset as we investment on that and it’s basic to use on LAW in corrected inclouded reverneu department and is help for reducing cost on ISO 27001 “ but it’s same on that need to help Thank you Kirati Srichawla share holder of 95 MFF on Both pls came on the correct I find is not correct regarding my password it’s happen and I suggestion on behalf of end user and it‘s effected to me on march 2025 and I found on Apr 2025 and make request on “ suggestion “ to check and “Apple care+ “ as around few days to you know

This is unique situation, save your rhetoric calling me crazy unless you’re willing to look at the evidence I’ve collected over the last 2 years. My entire family is being stalked and harassed by a DOD Contractor named Galapagos Federal Systems. They are literally using our identities to and accounts they’ve created to run Amazon Marketplace Business Accounts as sellers. They have amended my tax returns and they have hijacked my domain, which is MauiEasyRiders.Com. It’s pretty easy to see that they’ve hikacked my domain as they are using more than 20 ports around the clock, and I had to walk away from my business of 15 years because of a DDoS attack that is literally impossible to escape. These people are the lowest of the low. They have 250 million dollars in DODcontracts and they are registered as a small section 8a Native Hawaiian owned business, regardless of the fact that the owner is not Hawaiian and not from Hawaii, and the business was formed in Delaware. Their headquarters is literally a house in a neighborhood with nothing but a big ass can in the driveway, no traffic, no offices, just spook government hacks. I’ve mailed a complaint to the DOD hotline, been to the FBI in person, filled out all the forms online for every possible agency, filed police reports, nobody will even glance at the data I’ve accumulated and meticulously detailed, both in pdf format and on paper. They’re using my mothers identity and the identities of my two adult sons. It’s ridiculous. I literally have 90 Ip addresses in my DNS Leak Test and my home WiFi is hosting 190 IP Addresses. They have a Cisco business account in my name with over two hundred ASA and Fire IO devices that are years out of date. I have their exploit data, names, email addresses, absolutely everything I could possibly need that anyone investigating fraud would ask for, yet these parasites continue to carry out their crimes as if the law doesn’t apply to them. The only thing I have not tried is going to my Representatives from Washington in person. Anyone have any ideas? I’m happy to share data if anyone is interested in seeing it, even if you’re not interested in helping I’m happy to share all the info I can on their fraud. Thanks in advance!

2nd time this happened within weeks. Caution to all developers. Used to be reliable. Don't rely on it any more.

Since updating to tvoS 26.1/2 YouTube audio breaks when playing videos at anything other than 1x speed. At 1.25x or higher, the audio is "static-y" and distorted almost immediately. Strangely, AirPods work fine, it only happens with other audio outputs. Anyone else experiencing this, or have a fix? tvOS: 26.2 (23J582) YouTube app: 4.51.08 Speed Output Static 1x TV speakers No 1x HomePods No 1x AirPods Pro 3 No 1.25x TV speakers Yes 1.25x HomePods Yes 1.25x HomePods Mini Yes 1.25x Sonos One Yes 1.25x AirPods Pro 3 No

i am facing error while trying to enroll for Apple developer progam whenenver i am trying to sign in on apple developer website it saying that we are unable to process your request

Hi everyone, I’m running into repeated App Store rejections under Guideline 5.2.1 (Ownership) and would appreciate advice from anyone who’s navigated this successfully. Context: • The app is called FitQuest: AI Health Coach • FitQuest is a product/brand name, not a legal entity • The legal owner and operator is PandeyInvestment LLC • The Apple Developer account is under PandeyInvestment LLC • There are no third-party brand affiliations or white-label use • The app was built using a third-party app builder (web-to-native wrapper) What I’ve already provided to App Review: • Official LLC formation documents • A signed ownership & authorization letter explicitly stating: • FitQuest is a product owned by PandeyInvestment LLC • PandeyInvestment LLC is solely responsible for the app, services, and data • Clear explanations in Resolution Center replies Despite this, Apple continues to respond that the app “appears to be created from an app generation service and not directly submitted by the owner/provider of the business or service,” and asks again whether FitQuest is a business entity. My questions: 1. Is Apple expecting the app name to exactly match the legal entity name in cases like this? 2. Has anyone resolved a similar issue without creating a separate DBA or renaming the app to the LLC name? 3. Are there specific metadata fields (Seller Name, Copyright, Support URL, etc.) that reviewers rely on more heavily for ownership verification? 4. Is there additional documentation Apple typically accepts beyond LLC registration + signed authorization? Any guidance or firsthand experience would be hugely appreciated. Thanks in advance.

Hello, Our messaging app was rejected with guidelines 4.0 and 4.2.3 for using wallet authentication. Rejection reasons: "App uses web browser to sign in" we use deep links to native wallet apps, but they fallback to browser when wallets aren't installed "Requires users to download external apps" (Phantom/Solflare/Backpack wallets) Our situation: Wallet authentication is identity verification users sign with their private key There's no username/password alternative - the wallet address IS the identity Similar Web3 apps are approved on the App Store. Or like similar to whatsapp using phone number as the authentication to start with. What's the recommended implementation for wallet-based auth on iOS? Should we just provide a demo mode for reviewers like they suggested for? If so, how do we handle features requiring a real wallet. And can we remove that on later versions of the app? Is there a way to satisfy these guidelines while maintaining wallet authentication? Thank you.

I am not receiving any replies back for a request for entitlements I made a month ago, cant get a status or a response on any post, email, support ticket I create, what can I do?