Hi, looks like 15.4.x has broken softwareupdate --verbose --fetch-full-installer --full-installer-version for all versions (still works in 15.3.1) softwareupdate --verbose --list-full-installers Finding available software Software Update found the following full installers: * Title: macOS Sequoia, Version: 15.4.1, Size: 15244333KiB, Build: 24E263, Deferred: NO * Title: macOS Sequoia, Version: 15.4, Size: 15243957KiB, Build: 24E248, Deferred: NO * Title: macOS Sequoia, Version: 15.3.2, Size: 14890483KiB, Build: 24D81, Deferred: NO * Title: macOS Sequoia, Version: 15.3.1, Size: 14891477KiB, Build: 24D70, Deferred: NO * Title: macOS Sequoia, Version: 15.3, Size: 14889290KiB, Build: 24D60, Deferred: NO * Title: macOS Sequoia, Version: 15.2, Size: 14921025KiB, Build: 24C101, Deferred: NO * Title: macOS Sonoma, Version: 14.7.5, Size: 13337289KiB, Build: 23H527, Deferred: NO * Title: macOS Sonoma, Version: 14.7.4, Size: 13332546KiB, Build: 23H420, Deferred: NO * Title: macOS Sonoma, Version: 14.7.3, Size: 13334287KiB, Build: 23H417, Deferred: NO * Title: macOS Sonoma, Version: 14.7.2, Size: 13333067KiB, Build: 23H311, Deferred: NO * Title: macOS Ventura, Version: 13.7.5, Size: 11916960KiB, Build: 22H527, Deferred: NO * Title: macOS Ventura, Version: 13.7.4, Size: 11915317KiB, Build: 22H420, Deferred: NO * Title: macOS Ventura, Version: 13.7.3, Size: 11915737KiB, Build: 22H417, Deferred: NO * Title: macOS Ventura, Version: 13.7.2, Size: 11916651KiB, Build: 22H313, Deferred: NO * Title: macOS Monterey, Version: 12.7.4, Size: 12117810KiB, Build: 21H1123, Deferred: NO * Title: macOS Big Sur, Version: 11.7.10, Size: 12125478KiB, Build: 20G1427, Deferred: NO * Title: macOS Catalina, Version: 10.15.7, Size: 8055650KiB, Build: 19H15, Deferred: NO * Title: macOS Catalina, Version: 10.15.7, Size: 8055522KiB, Build: 19H2, Deferred: NO * Title: macOS Catalina, Version: 10.15.6, Size: 8055450KiB, Build: 19G2021, Deferred: NO softwareupdate --verbose --fetch-full-installer --full-installer-version 15.4 Scanning for 15.4 installer Install failed with error: Update not found https://discussions.apple.com/thread/256042015

Problem Description: On the iPad 10th tablet, when a USB 2.0 interface extended by a Type - C interface through a USB 2.0 hub is used to connect a keyboard, there is an issue that the keyboard cannot wake up the system when the system version is 18.0 (inclusive) or higher. However, this problem does not occur on systems earlier than 18.0. Note: To ensure low power consumption of the product, if there is no key press on the keyboard for 10 minutes, the power supply of some functions of the hub will be cut off, but the power supply of the keyboard will remain on. When a key is pressed, the power supply of all functions of the hub will be reconnected.

Sometimes, when I close the lid using the MacOs version Sequoia 15.2, with the configuration to require a password for 5 seconds, the system does not ask for the password as expected. This happens sometimes even though nothing preventing the system from sleeping when you close and open the lid, but it still seems like a security concern. Is there some known issue related to this problem or a way to avoid it? Result of command pmset -g: Configuration:

Hi Apple.I‘m currently using iPhone SE2 and Today I damaged my Finger with which I’m using Touch ID and now I cannot get access to password even I cannot delete fingerprint because I need to use my finger to delete fingerprint. Please help

I download a demo from:https://applepaydemo.apple.com/wallet-extensions And I run my WalletUIExtention,but it's failed. This is some key in my info.plist <key>NSExtensionMainStoryboard</key> <string>MainInterface</string> <key>NSExtensionPointIdentifier</key> <string>com.apple.PassKit.issuer-provisioning.authorization</string> <key>NSExtensionPrincipalClass</key> <string>MyAUViewController</string> But I found that deleting the key: NSExtendesionPrincipalClass or NSExtendeionMainStoryboard in the info.plist file can make it run. Should I delete the key ? Whitch key ? This is it alert: This it's message: 2025-05-06 09:15:02.946890+0800 WalletUIExt[626:13530] Successfully load keyboard extensions Line: 1 Col:1 2025-05-06 09:15:02.972702+0800 WalletUIExt[626:13597] [xpc.exceptions]<NSXPCConnection: 0x2830c30c0> connection from pid 584 on mach service named com.bank.app.WalletUIExt.viewservice: Exception caught during decoding of received selector __connectToViewControllerFromRemoteViewController:replyHandler:, dropping incoming message. Exception:<NSXPCDecoder: Qx12a82bc00> received a message or reply block that is not in the interface of the remote object (__connectToViewControllerFromRemoteViewController:replyHandler:),

İphone 16 cihazım ios 18.3.1 yüklü. Kamerada donma, odaklanma ve siyah ekran şikayetim var. Apple servisi ile görüştüğümde cihazın bütün donanım testlerinden basarıyla geçtiğini söylediler. Sorunun yazılımsal olduğunu söylediler. rica ediyorum bu iphone 16 için bu kamera sorununu ortadan kaldıracak ara bir düzeltme güncellemesi gönderin. Ve bu konuda azımsanmayacak kadar mağdur apple gönül dostları vardır. Bizi kaybetmeyin. Size güvenimizin boş olmadığını bizlere gösterin. Saygılarımla

I installed iOS 18.4 on Friday evening, all worked well during Saturday and Sunday, Monday morning the Phone rebooted and appeared to have installed an Update, I didn´t notice, I was about to answer a WhatsApp and the TestFlight beta didn´t start up, a renew of the App was not possible due to TestFlight not being available. So I thought a reboot would help, but I did a reset, since then BOOT LOOP. I brought in recovery mode, updated with the 18.4 ipsw, no change - BOOT LOOP

With CarPlay communication plugin R18.1, I followed these steps to integrate Enhance siri, the music sound was output from carplay and there is no option for output to Car. ============================================ Enhanced Siri Declare supported audioFormats for the AuxIn and AuxOut streams Since the AuxIn and AuxOut streams for Siri do not have to be both active at the same time, the accessory must claim audio formats support for AuxIn Audio and AuxOut audio independently. The audio formats for each stream can differ from each other (48KHz for AuxOut and 16KHz for AuxIn). The new audio types represent these new streams - AuxIn/speechRecognition & AuxOut/speechRecognition. Check if connected device supports the feature AirPlayReceiverSessionHasFeatureEnhancedSiri() Claim support in the Setup Response message if device supports the feature Add kAirPlayKeyAccessoryEnabledFeature_EnhancedSiri key through the AirPlayReceiverServer delegate AirPlayReceiverServerCopyProperty_f function for the kAirPlayKey_AccessoryEnabledFeatures key. Helper function: CFArrayAppendValue() Add Enhanced Siri parameters dictionary in the INFO message Add dictionary through the AirPlayReceiverServer delegate AirPlayReceiverServerCopyProperty_f function for the kAirPlayKey_EnhancedSiriInfo key. kAirPlayKey_EnhancedSiriInfo dictionary parameters: Voice activation of Siri - kAirPlayKey_EnhancedSiriVoice Current language of voice model - kAirPlayKey_VoiceModelCurrentLanguage Supported languages of voice model - kAirPlayKey_VoiceModelSupportedLanguages Enhanced Button activation of Siri - kAirPlayKey_EnhancedSiriButton Supported zone(s) if any - kAirPlayKey_SupportedSiriTriggerZones Update AudioStream Get state of the AuxIn state by providing an implementation of AudioStreamUpdateState() - Off, local buffering, or streaming to device. Decouple input streams from output streams. AuxIn is an independent input stream only. The property kAudioStreamProperty_Direction will provide the necessary information if the stream is input, output or input & output. Provide a handler for the AirPlayReceiverSessionDelegate setEnhancedSiriParams_f This will provide additional information: Activation type Setting the language of the voice model Invoke the Communication Plugin to start buffering Once the activation type has been specified, the accessory can request the plugin to start buffering using AirPlayReceiverSessionAuxInStart(). Use the new APIs to trigger Siri: AirPlayReceiverSessionRequestSiriActionWithLatency() AirPlayReceiverSessionRequestSiriVoiceActivationWithLatency() AirPlayReceiverSessionRequestSiriVoiceActivationWithSample() Button presses and voice activations should use this new APIs which adds a timestamp of the activation. These APIs allow a choice of a latency or a sample for button and voice activations. If there is a delay between the user pressing the button to notifying the device on the button press, this latency value should represent this time. If the accessory can determine which zone activated, it can provide the zone with the request. Invoke the Communication Plugin to stop buffering You may need to invoke the plugin to stop buffering (AirPlayReceiverSessionAuxInStop()) if exclusive access to the microphone is necessary. Such instances may include but not limited to: Native voice recognition session Telephony Another stream function which uses the microphone starts modesChanged notification can be used to determine if a resource is being used Note, if the session ends, the plugin will automatically stop buffering

I used spotlight search for almost everything I do through cmd+space. However ever since i updated my laptop to MacOS Sequoia 15.3.1, the spotlight search won't give me app results: for example i type "flux" and will get just web-based results, not the app. I tried going into the spotlight settings and only enabling applications to be searched for results and got nothing. I tried the same with the Notes app, i get the same result, i get some notes i wrote as result but not the actual app. It doesn't happen on all apps for example Brave or Spotify work.

Hello, why is apple won’t adding Just-In-Time compiler to ”Emulators” in the app store. And/or hypervisor for newer devices. i feel like UTM (which is a PC Emulator) or other Apps that emulate need JIT to work properly, and will consume significantly less battery to emulate/virtualize, And will have a noticeably better performance than just not enabling JIT, and by the way jit is already being used on iPadOS/iOS 18.3/18.3.1 and newer/older version of that so being enabled by the choice of the developer of the App is more convenient than doing it with tools. and by the why apple wont let emulators on iPads and newer iPhones do hypervisor, it’s better than JIT but requires a good cpu, like making it available to people with newer/powerful devices, hypervisor is better than JIT by a lot and removing it in iPadOS/iOS 18.4 was an unnecessary choice?, becuase it had a better potential in virtualization instead of emulating, and I feel like enabling it In M1-M2 iPads and A14-18pro and newer devices is just better from having it disabled, to unlock the fullest potential of the iPad it needs to have a app or something to do instead of just running high graphics games/or Apps.

After updating my carrier name changed to 410 04 name is not displaying just this code is showing

Issue with Heart Rate Graph from Apple Watch in iOS App Hello Community! I hope everyone is doing well. I'm developing an iOS app that includes a feature to display a graph of the heart rate recorded during a route using the Apple Watch. Current Implementation I have successfully implemented data collection and transfer from the Apple Watch to the iPhone. The app's main UI correctly displays the user's real-time BPM. When the user stops the route, an analysis view is generated, showing speed and altitude (both work perfectly). Expected Behavior The user starts recording a route while monitoring heart rate. After tapping "Stop Route," an analysis view should display a heart rate graph along with speed and altitude data. Issue Encountered Despite multiple attempts, I have not been able to properly generate the heart rate graph. The only result I have achieved so far is a flat line with points representing the recorded BPM over time, instead of a proper graph. Request for Help If anyone has experience implementing a similar feature, I would appreciate any guidance on correcting my implementation. I can share: The file responsible for graph visualization. The file handling data processing after the user stops the route. Any help or suggestions would be greatly appreciated! Summary I'm trying to display a heart rate graph from Apple Watch data in my iOS app. While data collection and transfer work fine, the graph only shows a flat line instead of a proper visualization. Speed and altitude graphs work correctly. If anyone has experience with this, I’d love some guidance!

I enable to visit the googleUrl , But My Terminal Can’t Click The http://www.google.com ( Use ping http://www.google.com ) . My Popose is to downloading the homebrew , Can’t download ,so I use ping . By the way , I successfully ping http://www.bing.com

iPhone15 Pro 18.4beta2版本，隔空投送碰一碰：两设备靠近共享名片功能失效

I have an old application. It worked at one time. Due to changes in the user environment, it is now possible to download applications from the AppStore. I built the app and sent it for review. And I received a report that my app crashed at startup. I tried to reproduce the fall for myself, but it didn't work out. In the crash log, I couldn't figure out what was wrong with the app. Please help me and tell me what I should look for in the log or in the application. The crash location (which I found in the log): _UIPathLazyImageAsset imageWithConfiguration cl-1.crash cl-1-n.crash

The issue occurred on a macOS device where nsurlsessiond consumed excessive data (75GB+) while Microsoft Office was installed. No active usage was involved. The issue stopped after uninstalling Office. To reproduce: Install Office, monitor nsurlsessiond via Activity Monitor for high data usage.

When i say “forgot password” in the app store it allows me to reset with passcode but when i enter the passcode it’s different than the one i enter when i unlock the phone. what would cause this issue?

Hi all, I'm working for a publisher, and we're looking to bring some of our PC/console titles over to Apple Arcade - how viable is this? Is Unity or Unreal Engine easier to port from? Does anyone have any contacts with porting studios who have done this before? Thanks

I’m trying to register an Apple Developer Account for my company. I uploaded all the required documents, but my initial application was rejected, and I was asked to provide notarized translations of my documents. I translated them and submitted everything for review on April 1. After a week without a response, I contacted Apple Support. They replied that the documents had been received and were under review. However, as of today, April 24, my account is still under review. I’ve sent five follow-up emails to Support asking for a status update on my case, but I haven’t received any replies. Has anyone faced a similar situation and could suggest what I can do to get a status update and finally complete the registration? If anyone from Apple Support is reading this, my case number is 20000098634973 and my Enrollment ID is J34432JQFC. Thank you in advance for your help.

I use DeviceActivityCenter to monitor app usage. For DeviceActivityEvent, I set 30 events, and the threshold of each event increases by 2 minutes: var events: [DeviceActivityEvent.Name: DeviceActivityEvent] = [:] for index in 0..<30 { let threshold = (index == 29) ? DateComponents(hour: 1) : DateComponents(minute: (index + 1) * 2) let name = DeviceActivityEvent.Name("\(prefix)|\(index)") events[name] = DeviceActivityEvent(applications: tokens, threshold: threshold) } After reaching the last DeviceActivityEvent, I will restart directly in DeviceActivityMonitor private func restartMonitoring(activity: DeviceActivityName) { let center = DeviceActivityCenter() let currentEvents = center.events(for: activity) do { try center.startMonitoring(activity, during: schedule, events: currentEvents) } catch { print("Fail: \(error)") } } But I found that after restarting, DeviceActivityEvent will be automatically executed even if I don't use the app. My iOS version is 18.5