Apple Sign In - "Sign up not completed" Error in Development Build (React Native / Expo) Problem Summary I'm implementing Apple Sign In in a React Native app using expo-apple-authentication. The Apple sign-in dialog appears as expected, but after tapping "Continue," it displays the message: "Sign up not completed". No credential is returned, and the promise eventually rejects with ERR_REQUEST_CANCELED. App Configuration Platform: React Native (Expo SDK 52) Library: expo-apple-authentication v7.1.3 Target: iOS development build (not Expo Go) Bundle ID: com.example.appname.nativetest (new App ID created for testing) Apple Developer Console Setup (Reviewed Carefully) App ID Explicit App ID (not a wildcard) "Sign In with Apple" capability enabled No associated Services IDs or Sign In with Apple Keys Provisioning Profile Development profile created for the test App ID Profile includes the test device and development certificate Installed successfully and used to sign the app Certificates and Signing Valid Apple Developer Program membership Development certificate installed and selected during build App installs and launches properly on the test device Implementation Attempts Attempt 1: Supabase OAuth Method Initially tried using Supabase’s built-in Apple OAuth provider: Configured with team ID, key ID, and JWT credentials Proper redirect URLs and scheme were in place Resulted in OAuth URL pointing to Supabase instead of Apple, with incomplete client ID Ultimately moved to native implementation for improved control and reliability Attempt 2: Native Apple Sign In (Current Approach) Using expo-apple-authentication with the following code: const credential = await AppleAuthentication.signInAsync({ requestedScopes: [ AppleAuthentication.AppleAuthenticationScope.FULL_NAME, AppleAuthentication.AppleAuthenticationScope.EMAIL, ], }); Relevant app.config.js Section: ios: { bundleIdentifier: 'com.example.appname.nativetest', usesAppleSignIn: true, infoPlist: { NSAppTransportSecurity: { NSAllowsArbitraryLoads: true, NSAllowsLocalNetworking: true, }, }, }, plugins: ['expo-apple-authentication'] Observed Behavior AppleAuthentication.isAvailableAsync() → true Credential state → NOT_FOUND (expected for new user) Apple Sign In dialog appears and allows interaction User taps "Continue" → dialog reports "Sign up not completed" Eventually returns: [Error: The user canceled the authorization attempt], code ERR_REQUEST_CANCELED Confirmed Working Aspects AppleAuthentication API is available and initialized App is signed correctly and launches on the physical test device Apple Sign In dialog appears with correct styling and options Same result observed across both Wi-Fi and cellular networks Clean Setup and Debugging Performed Removed all previous build artifacts Created a new App ID and new provisioning profile Rebuilt the app using expo run:ios --device Validated entitlements and provisioning assignments Removed any Services IDs and Apple Sign In keys used in previous attempts Verified ATS (App Transport Security) policies allow dev-time communication Environment Information Device: iPhone (not simulator) iOS Version: 18.5 Xcode: Latest version Apple ID: Developer account with 2FA enabled Build Method: EAS CLI using expo run:ios --device Open Questions Has anyone experienced the "Sign up not completed" issue with a clean native implementation in Expo? Are there known limitations when testing Apple Sign In in local development builds? Could prior Apple ID authorization attempts impact sign-in behavior during testing? Are there any additional configuration steps, Info.plist changes, or entitlements required beyond those listed above? Thank you in advance for any suggestions or guidance. We’re hoping this is simply a configuration detail that needs to be adjusted.

Our app uses Sign in with Apple. In recent weeks (or months), we've noticed that emails sent to @privaterelay.appleid.com addresses are not being delivered. We're not receiving any bouncebacks or error messages from the mail server, but the emails never reach the user's mailbox. We've also checked spam folders, with no luck. We have verified that our Email Sources are configured correctly in Apple Developer settings. Is there any way to debug or trace what might be happening with these messages? Thanks in advance!

I keep getting invalid_client, here is a test login: https://www.bella-booking.ch/_get_incl/test_apple_login.cfm Any help appreciated. NOTE: Everey other error, like wrong reroute or wrong client id, a different error will be sent frpm apple, after I checked all and crosschecked with jwt.io, it keep getting invalid_client. Any clue? If the response is correct, the token should be displayed on the page. Thx

Hello, We’ve resumed the migration process after a break. Since my colleague is no longer with us, I had to go through the steps again myself. As before, we’re trying to migrate "Sign In with Apple" users from tenant TENANT_A with client_id=CLIENT_ID_A to tenant TENANT_B with client_id=CLIENT_ID_B I followed the procedure described here: [Apple Developer Documentation](https://developer.apple.com/documentation/technotes/tn3159-migrating-sign-in-with-apple-users-for-an-app-transfer – Migrating Sign In with Apple Users, essentially repeating what my coworker previously attempted in coordination with your employee Stephanie. Here’s a summary of the steps and the issue we’re facing: STEP 1 - get authcode for TEAM A curl --location 'https://appleid.apple.com/auth/token' --header 'Content-Type: application/x-www-form-urlencoded' --data-urlencode 'grant_type=client_credentials' --data-urlencode 'scope=user.migration' --data-urlencode 'client_id=pl.CLIEND_ID_A' --data-urlencode 'client_secret=<TEAM_A_SECRET>' I receive response: { "access_token": "<ACCESS_TOKEN_TEAM_A>", "token_type": "Bearer", "expires_in": 3600 } STEP 2 - get authcode for TEAB B curl --location 'https://appleid.apple.com/auth/token' --header 'Content-Type: application/x-www-form-urlencoded' --data-urlencode 'grant_type=client_credentials' --data-urlencode 'scope=user.migration' --data-urlencode 'client_id=CLIENT_ID_B' --data-urlencode 'client_secret=<TEAB_B_SECRET>' I receive response: { "access_token":"<ACCESS_TOKEN_TEAB_B>", "token_type": "Bearer", "expires_in": 3600 } STEP 3 - get transfer_sub from TEAM A curl --location 'https://appleid.apple.com/auth/usermigrationinfo' --header 'Authorization: Bearer <ACCESS_TOKEN_TEAM_A>' --header 'Content-Type: application/x-www-form-urlencoded' --data-urlencode 'client_id=CLIENT_ID_A' --data-urlencode 'client_secret=<TEAM_A_SECRET>' --data-urlencode 'sub=USER_SUB_FROM_TEAM_A' --data-urlencode 'target=TENANT_B' I receive response: { "transfer_sub": "USER_SUB_FROM_TEAM_B" } STEP 4 - Team B exchanges transfer identifers curl --location 'https://appleid.apple.com/auth/usermigrationinfo' --header 'Authorization: Bearer <ACCESS_TOKEN_TEAM_B' --header 'Content-Type: application/x-www-form-urlencoded' --data-urlencode 'client_id=CLIENT_ID_B' --data-urlencode 'client_secret=<TEAM_B_SECRET>' I receive response: { "error": "invalid_request" } We’ve created a new client_id under tenant B and want to migrate users there. However, we skipped the step described in Step 3 of the documentation(https://developer.apple.com/documentation/technotes/tn3159-migrating-sign-in-with-apple-users-for-an-app-transfer#3-Team-A-initiates-app-transfer-to-Team-B), which involves initiating an app transfer. The reason is that this client_id is used solely for web authentication, not for a mobile app, so we don’t have an app to transfer. Based on our analysis and your documentation, it seems this flow only works if the client_id matches across both tenants, which can only be achieved through an app transfer, something we cannot proceed with. Apple previously insisted that we migrate these users, but as shown above, we’re stuck. Is there any alternative flow available, or can you assist us in completing this migration?

Hello, I’m trying to set up Sign In with Apple for my Firebase Authentication integration. Steps I followed: Created a Service ID in Apple Developer, e.g. com.example.myapp.signin. Tried to enable Sign In with Apple and configure the Web Authentication Configuration. Web Domain: myapp.firebaseapp.com Return URL: https://myapp.firebaseapp.com/__/auth/handler When I click Save, I get the following error in the browser console and a blank response page: Unsupported Request PATCH to http://developer.apple.com/services-account/v1/bundleIds/XXXXXXXX not supported. Reference #... What I have verified so far: My Apple Developer Program membership is active (paid). My App ID (e.g. com.example.myapp) exists in Identifiers. The App ID has Sign In with Apple capability checked. I need to link the Service ID with this App ID for Firebase web-based auth. Goal: Complete setup of Apple as a sign-in provider in Firebase Authentication. To do this, Apple requires me to add the Firebase return URL above, but the Developer Portal prevents saving with the 501 error. Has anyone else run into this, and is there a workaround (e.g. enabling via Xcode, App Store Connect, or other methods)? Is this a known bug with the Apple Developer Portal? Here is the screenshot of the error: And Response part: Thanks in advance!

Private relay emails are not being delivered, even though we've followed the guidance here, https://developer.apple.com/help/account/capabilities/configure-private-email-relay-service/ iCloud, gmail etc. get delivered fine but as soon as its a private relay email address they get bounced as unauthorized sender. We've tried a couple of domains but here I'll document test.x.domain.com We have registered domains (test.x.domain.com), also the sender communication emails just to be safe (noreply at test.x.domain.com). Passed SPF Authentication, DKIM Authentication. ESP account shows as all green checks in mailgun. Is there any way to track down what the actual rejection reason is? { "@timestamp": "2025-08-20T14:30:59.801Z", "account": { "id": "6425b45fb2fd1e28f4e0110a" }, "delivery-status": { "attempt-no": 1, "bounce-type": "soft", "certificate-verified": true, "code": 550, "enhanced-code": "5.1.1", "first-delivery-attempt-seconds": 0.014, "message": "5.1.1 <bounce+b53c9e.27949-6qj4xaisn4k=privaterelay.appleid.com@test.x.domain.com>: unauthorized sender", "mx-host": "smtp3.privaterelay.appleid.com", "session-seconds": 1.7229999999999999, "tls": true }, "domain": { "name": "test.x.domain.com" }, "envelope": { "sender": "noreply@test.x.domain.com", "sending-ip": "111.22.101.215", "targets": "6qj4xaisn4k@privaterelay.appleid.com", "transport": "smtp" }, "event": "failed", "flags": { "is-authenticated": true, "is-delayed-bounce": false, "is-routed": false, "is-system-test": false, "is-test-mode": false }, "id": "1gtVBeZYQ0yO1SzipVP99Q", "log-level": "error", "message": { "headers": { "from": "\"Test Mail\" <noreply@test.x.domain.com>", "message-id": "20250820143058.7cac292cf03993f2@test.x.domain.com", "subject": "Test Mail", "to": "6qj4xaisn4k@privaterelay.appleid.com" }, "size": 22854 }, "primary-dkim": "s1._domainkey.test.x.domain.com", "reason": "generic", "recipient": "6qj4xaisn4k@privaterelay.appleid.com", "recipient-domain": "privaterelay.appleid.com", "recipient-provider": "Apple", "severity": "permanent", "storage": { "env": "production", "key": "BAABAgFDX5nmZ7fqxxxxxxZNzEVxPmZ8_YQ", "region": "europe-west1", "url": [ "https://storage-europe-west1.api.mailgun.net/v3/domains/test.x.domain.com/messages/BAABAgFDXxxxxxxxxxxxxxNzEVxPmZ8_YQ" ] }, "user-variables": {} }

Hi everyone, I am currently implementing Server-to-Server Notifications for Sign in with Apple. I’ve encountered a discrepancy between the official documentation and the actual payload I received, and I would like to clarify which one is correct. The Situation: I triggered an account deletion event via privacy.apple.com to test the notification flow. When my server received the notification, the type field in the JSON payload was account-deleted (past tense). The Issue: According to the official Apple documentation, the event type is listed as account-delete (present tense). Here is the discrepancy I am observing: Documentation: account-delete Actual Payload: account-deleted My Question: Is the documentation outdated, or is this a known inconsistency? Should I handle both strings (account-delete and account-deleted) in my backend logic to be safe, or is account-deleted the new standard? Any insights or confirmation from those who have implemented this would be greatly appreciated. Thanks!

Hi I am experiencing a persistent 'invalid_client' error when attempting to exchange the authorization code for an access token using Sign in with Apple for my website (https://www.vitamarinaweb.com). Current Setup & Steps Taken: Identifier: I am using the Service ID com.vitamarinaweb.web1, which is correctly linked to the Primary App ID com.vitamarinaweb.web. Client Secret: I have generated a fresh Client Secret (JWT) using a valid Key (.p8) and confirmed the Team ID (29J763Q88J) and Key ID (RRW6536D27) are correct. Redirect URIs: My Return URL is set to https://www.vitamarinaweb.com/login.php and I have verified there are no trailing spaces or mismatches. Manual Test (CURL): When I perform a manual POST request via CURL using the generated Client Secret, I receive an 'invalid_grant' response (meaning the Client Secret and Client ID are accepted, and only the temporary code is rejected as expected). The Issue: Despite the CURL success, every request initiated through the web browser/PHP application returns {"error":"invalid_client"}. Verification Requested: Could you please verify if there is a synchronization delay or a specific block on Service ID com.vitamarinaweb.web1? Is there any internal mismatch between the Key ID RRW6536D27 and its association with the newly created Service ID? I have already cleared browser caches and tried multiple devices (different IP addresses) with the same result. Thank you for your assistance."

Dear Apple Developer Technical Support, We are currently following the official Apple documentation “TN3159: Migrating Sign in with Apple users for an app transfer” to carry out a Sign in with Apple user migration after successfully transferring several apps to a new developer account. Here is a summary of our situation: Under the original Apple developer account, we had five apps using Sign in with Apple, grouped under a shared primary app using App Grouping. Recently, we transferred three of these apps to our new Apple developer account via App Store Connect. After the transfer, these three apps are no longer associated with the original primary App ID. We reconfigured individual Services IDs for each app in the new account and enabled Sign in with Apple for each. More than 24 hours have passed since the app transfer was completed. Now we are attempting to follow the migration process to restore user access via the user.migration flow. Specifically, we are using the following script to request an Apple access token: url = "https://appleid.apple.com/auth/token" headers = {"Content-Type": "application/x-www-form-urlencoded"} data = { "grant_type": "client_credentials", "scope": "user.migration", "client_id": "com.game.friends.ios.toptop.sea", # New Services ID in the new account "client_secret": "<JWT signed with new p8 key>" } response = requests.post(url, headers=headers, data=data) However, the API response consistently returns: { "error": "invalid_client" } We have verified that the following configurations are correct: The client_secret is generated using the p8 key from the new account, signed with ES256 and correct key_id, team_id, and client_id. The client_id corresponds to the Services ID created in the new account and properly associated with the migrated app. The scope is set to user.migration. The JWT payload contains correct iss, sub, and aud values as per Apple documentation. The app has been fully transferred and reconfigured more than 24 hours ago. Problem Summary & Request for Support: According to Apple’s official documentation: “After an app is transferred, Apple updates the Sign in with Apple configuration in the background. This can take up to 24 hours. During this time, attempts to authenticate users or validate tokens may fail.” However, we are still consistently receiving invalid_client errors after the 24-hour waiting period. We suspect one of the following issues: The transferred apps may still be partially associated with the original App Grouping or primary App ID. Some Sign in with Apple configuration in Apple’s backend may not have been fully updated after the transfer. Or the Services ID is not yet fully operational for the transferred apps in the new account. We kindly request your assistance to: Verify whether the transferred apps have been completely detached from the original App Grouping and primary App ID. Confirm whether the new Services IDs under the new account are fully functional and eligible for Sign in with Apple with user.migration scope. Help identify any remaining configuration or migration issues that may cause the invalid_client error. If necessary, assist in manually ungrouping or clearing any residual App Grouping relationships affecting the new environment. We have also generated and retained the original transfer_sub identifiers and are fully prepared to complete the sub mapping once the user.migration flow becomes functional. Thank you very much for your time and support!

Hi https://appleid.apple.com/auth/authorize?client_id=com.adobe.services.adobeid-na1.web shows: invalid_request But https://appleid.apple.com/auth/authorize?client_id=xrqxnpjgps shows: invalid_client I've created a Primary App ID and ticked "Sign In with Apple". I've created a Service ID and ticked "Sign In with Apple" (identifier is xrqxnpjgps). When I click "Configure" for the "Sign In with Apple" of the Service ID, it is linked to the Primary App ID. Why do I get an invalid_client error? I've contacted the support by mail, and have been redirected here, does someone here have the ability/access/knowledge/will to figure out the cause and then tell me? Regards

Hello, We are experiencing an issue related to Sign in with Apple Server-to-Server (S2S) notifications, specifically involving repeated delivery of the account-deleted event, and would like to ask whether this behavior is expected or known. Background We have configured an S2S notification endpoint for Sign in with Apple in accordance with Apple’s requirements for account status change notifications. Our endpoint: Is reachable over HTTPS Consistently returns HTTP 200 OK Successfully receives other S2S events, including: email-enabled email-disabled consent-revoked Issue: Repeated 'account-deleted' events for the same Apple ID For most users, the account-deleted event is delivered only once, as expected. However, for a specific Apple ID used with Sign in with Apple, we are observing repeated deliveries of the same account-deleted event, arriving at regular intervals (approximately every 5 minutes). The payload contents are identical between deliveries and include the same user identifier (sub) and event timestamp. Notably: The Apple ID deletion itself completed successfully The payload does not change between deliveries Our endpoint continues to return HTTP 200 OK for every request Questions We would appreciate clarification on the following points: Is repeated delivery of the same account-deleted event expected behavior in any scenario? Is there a retry or redelivery mechanism for this event type, even when HTTP 200 is returned? Could repeated deliveries indicate that the deletion process is still considered “in progress” on Apple’s side? Are developers expected to treat account-deleted events as at-least-once delivery and handle them idempotently? Additional context While researching this issue, we found a forum thread describing a very similar case: https://developer.apple.com/forums/thread/735674 In that discussion, Apple staff advised submitting the issue via Feedback Assistant, which suggests that this behavior may already be understood internally. We have also submitted a Feedback Assistant report with detailed logs and timestamps. Any clarification on the expected behavior or recommended handling for this scenario would be greatly appreciated. Thank you for your time and support.

I hope this problem could be solved, also in case any other one strugling the same issue could be helpful. We are developing an iOS App which use "sign in with Apple" feature. We found we can not login with this feature, the "sign in with Apple" dialog box always flash an error info "Sign-Up Not Complete". We have double checked configuration of Bundle ID, and xcode capabilities, info.plist, entitlements, etc. We have even changed the developer team, using other bundle ID and demo code to testify this, also got failure of "Sign-Up Not Complete" error. We did even just use Apple official demo code (https://developer.apple.com/documentation/AuthenticationServices/implementing-user-authentication-with-sign-in-with-apple), also got the same failure. Interestingly, we found that using some old Bundle IDs which created before (even we did not use it for App yet), we could get "sign in with Apple" success logged in. Therefore we now can not include "sign in with Apple" feature in our App today, and this is the key feature in our App. Please help. Since there is very little information we could collect, I just put the debug error here: Authorization failed: Error Domain=AKAuthenticationError Code=-7003 "(null)" UserInfo={AKClientBundleID=com.nethawk.flutter.battlebuddy} LaunchServices: store (null) or url (null) was nil: Error Domain=NSOSStatusErrorDomain Code=-54 "process may not map database" UserInfo={NSDebugDescription=process may not map database, _LSLine=72, _LSFunction=_LSServer_GetServerStoreForConnectionWithCompletionHandler} Attempt to map database failed: permission was denied. This attempt will not be retried. Failed to initialize client context with error Error Domain=NSOSStatusErrorDomain Code=-54 "process may not map database" UserInfo={NSDebugDescription=process may not map database, _LSLine=72, _LSFunction=_LSServer_GetServerStoreForConnectionWithCompletionHandler} Failed to get application extension record: Error Domain=NSOSStatusErrorDomain Code=-54 "(null)" ASAuthorizationController credential request failed with error: Error Domain=com.apple.AuthenticationServices.AuthorizationError Code=1001 "(null)"

Hello, I'm developing an iOS app that includes a Sign In with Apple feature. I’ve completed the following setup steps: Enabled Sign In with Apple for the app’s Bundle ID in the Apple Developer Console. Added Sign In with Apple capability in Xcode under Signing & Capabilities. Tested the feature on a real device, not a simulator. Registered the real device ID in the Developer Console just in case any hidden permission issues exist. Despite following all the necessary steps (and even using the official Apple sample code) the Sign In bottom sheet displays a "Sign Up Not Completed" message. Unfortunately, I don’t receive any further error details to help diagnose the issue. After searching through StackOverflow and this forum, I came across posts suggesting that the feature might take up to 48 hours to become active after setup. Is this still the case in 2025? Or is there something I might be missing? For additional context: other features such as APNs (Push Notifications) are working as expected. Thank you in advance for any help or insight!

Hello, our Sign in with Apple Button no longer works and throws an 7003 error. It worked a few days ago but suddenly fails. Any ideas how to fix this? Thanks in advance! plist: <dict> <key>com.apple.developer.applesignin</key> <array> <string>Default</string> </array> ... Code: var body: some View { VStack { SignInWithAppleButton(.signUp) { request in request.requestedScopes = [.fullName, .email] } onCompletion: { result in switch result { case .success(let authResults): handleSuccess(authorization: authResults) case .failure(let error): self.credentialFailure = true self.errorMessage = .appleSignInError logger.error("SIWA login failure: \(error)") } } .signInWithAppleButtonStyle(.white) .cornerRadius(GlobalValues.cornerRadius) } } Error: Authorization failed: Error Domain=AKAuthenticationError Code=-7003 "(null)" UserInfo={AKClientBundleID=com.our.app} ASAuthorizationController credential request failed with error: Error Domain=com.apple.AuthenticationServices.AuthorizationError Code=1001 "(null)" SIWA login failure: Error Domain=com.apple.AuthenticationServices.AuthorizationError Code=1001 "(null)"

I am trying to implement Apple Login on the web. The language I am using is PHP. I have created the App ID, Service ID, and Key. In the Service ID, I clicked the Configure button for Sign In With Apple and entered the domain and return URL. However, when I click the login button, I only get an "invalid_client" error screen.

I've been fighting this issue for 3 days now. After several failures, I created a new app id and service id yesterday. I checked and entered domain, callback, and login usage clearly, but it keeps returning an error. Can you help me figure out what's wrong? https://appleid.apple.com/auth/authorize?response_type=code&client_id=com.smoothmail.signin&redirect_uri=https%3A%2F%2Fsmoothmail.store%2Fapple-auth&state=4157daa763&scope=name+email&response_mode=form_post

Hello, I’m trying to remove the “Sign in with Apple” for my app via the iOS settings (also tried on a Mac, and on the web via account.apple.com). When I tap “Stop Using”, nothing happens, the dialog disappear but the app remains listed. Someone said on a forum that the issue is linked with the ServiceId that doesn't exist anymore. But how to recover it ? And anyway this behavior is unintended and creates a gap in the process. Has anyone experienced this before? Is there a known fix, or should I contact Apple Support directly for server-side revocation? Thank you!

Sign up not completed when I log to an app using apple id. What should i do?

When use apple login, It always failed, other app developer by me is success, but the new app failed, the code is the same, it tips Sign up not Completed

I'm trying to implement Apple Login using OAuth through the following URL: https://appleid.apple.com/auth/authorize I use the client_id parameter, which corresponds to the Service ID created under Identifiers in the Apple Developer portal. The problem is: an existing Service ID works fine, but when I create a new Service ID and try to use it, I get an invalid_client error as soon as the authorization window opens. I've double-checked everything, but I can't figure out what the issue is. Has anyone else experienced this or knows the cause? Any help would be greatly appreciated!