I have a table cell containing a UITextView. The table is using automaticDimension for the cell height and the cell itself is formatted in a way that the UITextView can be a variable height. The intention is that the textview and the cell should reisize as the user types and the text flows into additional lines. If I do nothing else, this doesn't happen. If I add a UITextViewDelegate and call sizeToFit() on the textview whenever the text changes, and then reload the table cell, it does resize, but it does so in an extremely sloppy and unusable way. Specifically, the textview loses focus, the cursor disappears, and the text starts to render in odd ways with overlapping characters or graphics from surrounding elements. What is the correct way to accomplish this? Thanks, Frank

I'm working on a BLE app with a hardware partner using samples of their device, which I am able to erase and re-flash when needed. When I try to use the device it initially works fine. I can connect to it, make requests, and get back responses. However, after a short time and a few successful runs, I start getting the error "Encryption is insufficient". The error is seen in the "didUpdateValueFor" function. I can still connect to the device, and enumerate all of its services and characteristics, but I can't read any data. If at this point I re-flash the device and also go into the iOS setting app and "forget" it, then I can use the device normally again, at least for a while. What causes this? Is there a way I can fix it in my app? Thanks, Frank

I manage several different apps for different customers, who have invited me as a user to their Apple Developer accounts. This week a new customer invited me and I accepted the invitation. If I go to App Store Connect, I can select that customer, view the Users screen and see that he has given me Admin access which is what I requested. However, when I go to developer.apple.com/account, I cannot access the "Certificates, IDs & Profiles" section. In fact, I do not even see the new customer in the pick list underneath my name. This customer is non-technical and needs me to do everything involved with publishing his app, starting with creating the App Store listing and certificates. In App Store Connect I can "Add App" but there are no bundle IDs in the pick list. If I click the link that says "Register a new bundle ID" it takes me to the Certificates page but with a different customer's account selected. Why am I unable to do this given that I have Admin access? Is there some other way I can set up this app? Frank

I often get crash logs where nothing in the stack trace is my code, other than an entry point in main. I don't know how to use these to figure out where the problem is. For example this one, Exception Type: EXC_CRASH (SIGABRT) Exception Codes: 0x0000000000000000, 0x0000000000000000 Exception Note: EXC_CORPSE_NOTIFY Triggered by Thread: 0 Last Exception Backtrace: 0 CoreFoundation 0x1c21cf180 __exceptionPreprocess + 228 (NSException.m:172) 1 libobjc.A.dylib 0x1c13a79f8 objc_exception_throw + 56 (objc-exception.mm:557) 2 UIKitCore 0x1ee572b1c -[UINavigationController pushViewController:transition:forceImmediate:] + 2312 (UINavigationController.m:7317) 3 UIKitCore 0x1ee5720b0 -[UINavigationController pushViewController:animated:] + 664 (UINavigationController.m:7272) 4 UIKitCore 0x1ee62ae9c -[_UIViewControllerTransitionCoordinator _applyBlocks:releaseBlocks:] + 264 (UIViewControllerTransitioning.m:1121) 5 UIKitCore 0x1ee62725c -[_UIViewControllerTransitionContext _runAlongsideCompletions] + 140 (UIViewControllerTransitioning.m:374) 6 UIKitCore 0x1ee626f34 -[_UIViewControllerTransitionContext completeTransition:] + 132 (UIViewControllerTransitioning.m:286) 7 UIKitCore 0x1ee6371f4 __53-[_UINavigationParallaxTransition animateTransition:]_block_invoke.118 + 740 (_UINavigationParallaxTransition.m:393) 8 UIKitCore 0x1ef032d1c -[UIViewAnimationBlockDelegate _didEndBlockAnimation:finished:context:] + 752 (UIView.m:12852) 9 UIKitCore 0x1ef009a74 -[UIViewAnimationState sendDelegateAnimationDidStop:finished:] + 312 (UIView.m:0) 10 UIKitCore 0x1ef00a048 -[UIViewAnimationState animationDidStop:finished:] + 296 (UIView.m:2111) 11 UIKitCore 0x1ef00a0e8 -[UIViewAnimationState animationDidStop:finished:] + 456 (UIView.m:2130) 12 QuartzCore 0x1c671f3c8 CA::Layer::run_animation_callbacks(void*) + 284 (CALayer.mm:6680) 13 libdispatch.dylib 0x1c1c0d7d4 _dispatch_client_callout + 16 (object.m:511) 14 libdispatch.dylib 0x1c1bbb008 _dispatch_main_queue_callback_4CF$VARIANT$mp + 1068 (inline_internal.h:2441) 15 CoreFoundation 0x1c2160b20 __CFRUNLOOP_IS_SERVICING_THE_MAIN_DISPATCH_QUEUE__ + 12 (CFRunLoop.c:1813) 16 CoreFoundation 0x1c215ba58 __CFRunLoopRun + 1924 (CFRunLoop.c:3113) 17 CoreFoundation 0x1c215afb4 CFRunLoopRunSpecific + 436 (CFRunLoop.c:3247) 18 GraphicsServices 0x1c435d79c GSEventRunModal + 104 (GSEvent.c:2245) 19 UIKitCore 0x1eeba7c38 UIApplicationMain + 212 (UIApplication.m:4353) 20 therapeutic-listening 0x100b83380 main + 88 (main.m:16) 21 libdyld.dylib 0x1c1c1e8e0 start + 4 (:-1) Thread 0 name: Thread 0 Crashed: 0 libsystem_kernel.dylib 0x00000001c1d6b0dc __pthread_kill + 8 (:-1) 1 libsystem_pthread.dylib 0x00000001c1de4094 pthread_kill$VARIANT$mp + 380 (pthread.c:1492) 2 libsystem_c.dylib 0x00000001c1cc3ea8 abort + 140 (abort.c:94) 3 libc++abi.dylib 0x00000001c1390788 abort_message + 132 (abort_message.cpp:75) 4 libc++abi.dylib 0x00000001c1390934 default_terminate_handler() + 308 (cxa_default_handlers.cpp:68) 5 libobjc.A.dylib 0x00000001c13a7e00 _objc_terminate() + 124 (objc-exception.mm:693) 6 libc++abi.dylib 0x00000001c139c838 std::__terminate(void (*)()) + 16 (cxa_handlers.cpp:66) 7 libc++abi.dylib 0x00000001c139c8c4 std::terminate() + 84 (cxa_handlers.cpp:97) 8 libdispatch.dylib 0x00000001c1c0d7e8 _dispatch_client_callout + 36 (object.m:514) 9 libdispatch.dylib 0x00000001c1bbb008 _dispatch_main_queue_callback_4CF$VARIANT$mp + 1068 (inline_internal.h:2441) 10 CoreFoundation 0x00000001c2160b20 __CFRUNLOOP_IS_SERVICING_THE_MAIN_DISPATCH_QUEUE__ + 12 (CFRunLoop.c:1813) 11 CoreFoundation 0x00000001c215ba58 __CFRunLoopRun + 1924 (CFRunLoop.c:3113) 12 CoreFoundation 0x00000001c215afb4 CFRunLoopRunSpecific + 436 (CFRunLoop.c:3247) 13 GraphicsServices 0x00000001c435d79c GSEventRunModal + 104 (GSEvent.c:2245) 14 UIKitCore 0x00000001eeba7c38 UIApplicationMain + 212 (UIApplication.m:4353) 15 therapeutic-listening 0x0000000100b83380 main + 88 (main.m:16) 16 libdyld.dylib 0x00000001c1c1e8e0 start + 4 (:-1)

I'm building a physical therapy app and as part of it, I want the app to oversee and measure certain exercises that the user will do. I'm not sure if I should use Core Motion, location services, or something else. These are the specific things we want to measure: The user walks for 6 minutes. At the end of it, we tell them how far they walked. The user runs for 30 seconds. We tell them their average speed and peak speed. The user does a broad jump: basically just jumping forward as far as they can. We want to measure the distance jumped. I'm thinking location services might work for #1 but I doubt it will be accurate enough for #2. For #3 I thought I could do this with the accelerometer if I took readings at short intervals and combined them with something like the trapezoidal rule, but I can't get this to produce a reliable result. Let me know what you think, thanks.

I need to test my app's in-app purchases and I am having a very difficult time with it. I created a "Sandbox" account in App Store connect. Doing so was very frustrating. It told me multiple times that my password was "too simple", without ever explaining what the password rules are. Then it emailed me something so I could "validate" the account. Luckily I used an actual email address that I can receive mail on. I was expecting I could use any fake address since this is a Sandbox account. After that I started an iOS simulator and tried to log in. It immediately asked me to turn on two-factor authentication. I declined, and then it just said "User name or password is incorrect". I tried a couple more times, then I went back and actually turned on the two factor auth. But that didn't solve the problem. I still cannot log in. Can someone explain what I'm doing wrong here?

I cannot get CMMotionActivityManager.startActivityUpdates() to work. I have given my app permission to use core motion and also put the required description key into my Info.plist file. I am expecting my user to walk. I call startActivityUpdates() and then stand up and start walking. I typically get about 3 callbacks within a couple of seconds, all of which have "false" set for all of the activity flags, even "unknown". Then after that I get nothing. I can't figure out what I could possibly be doing wrong here. The code is really simple. I looked at doezens of examples and my code is doing the exact same things.

I'm working on a screen where the goal is for the user to walk for 6 minutes while the app times them and measures the distance walked. I'm using CMPedometer to track the walking distance and a repeating 1-second Timer to count down the time. This works fine as long as the app is in the foreground, but I'd like my user to be able to lock their phone and put it away while they walk. I used UIApplication.shared.beginBackgroundTask, but it doesn't provide enough time. It usually only gives me around 30 seconds. I also tried calling UIApplication.shared.beginBackgroundTask again or calling it once every time the timer ticks, with no better result. How can I accomplish my goal here?

I'm trying to use CMAcceleration data in my app to detect when the user is doing certain kinds of activities. The problem I'm having is that the acceleration data for the same user motions is different depending on how they are holding their phone. I don't care about the orientation of the phone, I just care about the overall motion of the person holding it. I've researched and tried a whole bunch of ways to correct the data for phone orientation, such as rotating the acceleration using the CMAttitude rotation matrix, removing the effect of gravity with a series of calculations, and doing both of these in both orders. I can't seem to come up with something that works. I think there has to be some solution since iOS can do things like step counting which I assume doesn't depend on the orientation of the phone. Thanks, Frank

I added this file as Apple requested due to my app using UserDefaults, but it still complains when I upload it. This is the message: TMS-91053: Missing API declaration - Your app’s code in the “Production” file references one or more APIs that require reasons, including the following API categories: NSPrivacyAccessedAPICategoryUserDefaults. And this is my file, what's wrong? <dict> <key>NSPrivacyAccessedAPITypes</key> <array> <dict> <key>NSPrivacyAccessedAPIType</key> <string>NSPrivacyAccessedAPICategoryUserDefaults</string> <key>NSPrivacyAccessedAPITypeReasons</key> <array> <string>CA92.1</string> </array> </dict> </array> </dict>

I have a customer who wants to protect the REST API of their app with a private certificate. They would then distribute the client certificate to the authorized users. Their app would not work unless the client certificate is already installed on the user's phone before they run the app. I have never done this before. Is it possible to install a client certificate on an iPhone without running an app, for example if it were sent in an email message? And if it is possible, is App Review going to let such an app into the app store? Thanks, Frank

Whenever I make a new app I end up getting bug reports from people who say they can't see text, or they can just about see white text against an almost white background. It always turns out to be because their phone is in dark mode, which I don't use. Almost all of my views have the background color set to "System background color" which is the default value when you create a view. Why does dark mode change the color of the text but not the background?

One of my customers is reporting a crash. He sent me a file called "Analytics-2024-07-08-200041.ips.ca.synced". I don't know what to do with this file. It appears to contain thousands of lines of JSON. I can read them, but the file is too large for me to find any specific problem. What is this file, how was it generated, and how am I supposed to use it? When I searched for the answer online, I kept running into instructions asking me to choose tabs or press buttons in Xcode that don't exist. I assume that this is because Xcode changed since those instructions were written. I did check for crash reports in the Organizer and it does not report any for the current version of my app, or any within the past two weeks for any version.

You used to be able to use the "User Defined Runtime Attributes" section in Interface Builder to add attributes such as layer.borderColor, layer.borderWidth, layer.cornerRadius, etc. I can still enter these values, but they don't do anything. What happened? I can still set them via code and then they work, but it's much more convenient to be able to do it in interface builder.

I need some clarification on what is supposed to happen if the "allowsBackgroundLocationUpdates" flag on CLLocationManager is set to true, and only the "While in Use" permission has been given. The customer I'm working with thinks that this combination should allow the app to receive location updates in the background indefinitely, as long as the app was in the foreground when we started receiving them. What we've experienced is inconsistent. App updates do continue when the screen locks and in some cases when we switch to another app, but often they do not. Our app doesn't require location updates 24/7, it requires them for a period of time when the user is performing an activity. The user starts and stops the activity in the app, and the activity might last up to a couple of hours. Can we do this using "While in Use" or do we need to request "Always" ?