I have several ObjC based apps in the App Store and used to validate the receipt file inside the app in my code, and then reject it with exit(173) if it's invalid, which did trigger macOS to update the receipt if possible. This isn't working any more in recent macOS versions, where the user is instead just told that the app is damaged, and they need to re-install it manually. Which sucks. So I wanted to update my code. I read about SKReceiptRefreshRequest, which is supposed to re-download and install the receipt file, if I understand it correctly. I implemented the code but now have trouble verifying that it works as intended, and does this in a user friendly way. I found in my tests that macOS now caches the receipt in ~/Library/Caches/com.apple.appstoreagent/fsCachedData and then hardlinks the file into the app. BTW: Sadly, this also requires that the app is located on the startup volume or the system will refuse to install the receipt, which wasn't a requirement in past times. Now, if the receipt is already present in the cache folder, then my code works - the receipt gets re-linked. But what if the cached receipt isn't there, yet? Such as that the user had copied the app from another Mac over to a freshly installed Mac? In the past, when the user then launched the app on the new Mac, he'd be prompted to login to the MAS and if that worked, the receipt would get installed and the app launched. Basically, the question is: What if the receipt validation fails in my app and I request a new receipt, but the user has not yet logged into MAS (e.g. new computer)? To simulate this, I logging out of the MAS and TestFlight, deleting all copies of the app and then run the app that I had copied from another Mac where it was authorized with a valid receipt for that device. If I do this with the old version that uses exit(173), I get these two messages in macOS 15.2: The second one is especially terrible because it shows the translocated path, which the average user surely get quite confused, and then maybe even search in vain for the app in there and get frustrated. But that's out of my hands. Sigh. Now, that was proving that the old method with exit(173) isn't working any more and needs to be changed in my apps. Since I'm still developing (testing) this new behavior, the app is therefore not in the MAS yet - the only way for me to test this is to use TestFlight. However, running a Testflight app copied from another Mac leads to this error: That is not helpful in simulating what would happen if this app was released in the MAS. This won't let me find out what happens if my app is run on a Mac where the receipt fails and I ask it to load it via SKReceiptRefreshRequest and if the user is NOT yet logged into the MAS account for this purchased app of his/hers. That leaves only one option: Release the app with untested code and hope for the best. Contrary to this new behavior, the old method did let me test this easily because I would just use the special App Store tester account with the MAS app, i.e. the built MAS app would, when I launched it locally, request for a login and I'd provide my tester's account. But this isn't available any more, apparently. What a mess.

I am developing an application that processes a video file stored on a server. I use URLSessionDataTask with a delegate handler to download the file. It is not necessary to download the entire file at once. Instead, I can load small chunks of the file as needed. This approach helps minimize memory consumption. I am trying to design a network layer that supports this behavior. Ideally, I would like to have an interface similar to: func readMoreData(length: Int) async throws -> Data Problems I Encountered: It seems that URLSessionDataTask does not allow controlling how many bytes will be downloaded. It always downloads the entire request. If I call suspend on URLSessionDataTask, the network activity does not stop, and the file keeps downloading. If I upgrade the dataTask to a StreamTask, the file still downloads, though reading bytes can be done through the StreamTask API. I would prefer behavior similar to AsyncHTTPClient (a Swift Server library) or Network Framework. These frameworks allow controlling the number of bytes downloaded at a time. Unfortunately, they do not fit the specific requirements of my project. Am I correct in understanding that controlling the download process is not possible with URLSessionDataTask? As a possible solution, I am considering using HTTP Range Requests, though this would increase the number of additional server requests, which I would like to avoid.

I’m working on a solution to archive iMessages by using an API or similar mechanism. Here’s the desired workflow: The user provides their phone number to initiate the archiving process. They receive a text message with a URL link. Clicking on the link authorizes the archiving of their iMessages. Once authorized, their text messages are archived. So far, I’ve researched third-party services and APIs but haven’t found any that offer this capability directly for iMessages. Questions: Are there any APIs or frameworks (Apple or third-party) that support accessing and archiving iMessages programmatically?

I really don't understand what kind of cyber crap CloudKit is! In macOS, CloudKit basically doesn’t work properly

Hello everyone, I hope you’ll all bear with me as I get up to speed. My background is in Unix, procedural languages, mission critical databases and enterprise applications. I’ve just started heading a team with an iOS app used in healthcare that contains confidential patient information (PHI) that's governed by HIPAA and FDA cybersecurity, etc. It seems there’s some contention in the team over whether the app, SQLite db, and medical images belong in the Documents or an Application Support directory in the Library. From everything I’ve read, it seems that Apple’s intent is Library/Application Support. Two questions: Which is the correct location? And hopefully, a few compelling justifications. On one of our iPads, the app stopped displaying what was two years of data in SQLite. I haven’t yet tested for index corruption, however one of the programmers believes this resulted from an iOS update that needed space and cleared data in the cache (but that makes no sense to myself). Feedback highly appreciated. Many thanks, David Why, because somebody has to

When attempting to deploy schema changes in the iCloudKit Database by clicking the Deploy Schema Changes button, a Confirm Deployment dialog appears, showing an error: “Internal error”. The following error details were observed in the JavaScript console: • description: “The request has failed due to an error.” • headers: undefined • message: “Known response error: The request has failed due to an error.” • result: • code: 400 • detailedMessage: undefined • message: “bad-request” • reason: “Internal error” • redirectUrl: undefined • requestUuid: “0c5b4af2-15c9-425f-87ea-************” • retryAfterSeconds: undefined

Periodically when testing I am running into a situation where the app hangs and beach balls forever when using AVAudioEngine. This seems to log out when this affect happens: Now when this happens if I pause the debugger it's hanging at a call to: [engine connect:playerNode to:engine.mainMixerNode format:buffer.format]; #0 0x000000019391ca9c in __psynch_mutexwait () #1 0x0000000104d49100 in _pthread_mutex_firstfit_lock_wait () #2 0x0000000104d49014 in _pthread_mutex_firstfit_lock_slow () #3 0x00000001938928ec in std::__1::recursive_mutex::lock () #4 0x00000001ef80e988 in CADeprecated::RealtimeMessenger::_PerformPendingMessages () #5 0x00000001ef818868 in AVAudioNodeTap::Uninitialize () #6 0x00000001ef7fdc68 in AUGraphNodeBase::Uninitialize () #7 0x00000001ef884f38 in AVAudioEngineGraph::PerformCommand () #8 0x00000001ef88e780 in AVAudioEngineGraph::_Connect () #9 0x00000001ef8b7e70 in AVAudioEngineImpl::Connect () #10 0x00000001ef8bc05c in -[AVAudioEngine connect:to:format:] () Current all my audio engine related calls are on the main queue (though I am curious about this https://forums.developer.apple.com/forums/thread/123540?answerId=816827022#816827022). In any case, anyone know where I'm going wrong here?

Good day. Installed Sequoia Developer Beta. After that, the laptop started to behave incorrectly, programs over 1 GB stopped installing, updates were not installed, sometimes it rebooted spontaneously. Decided to roll back. With the help of another Macbook, I managed to install 14.6.1. Errors remained. Updates are not installed. Tried to restore through the recovery menu, error at 52 minutes, using a boot disk, the same error. What else can I do? Mac Book Pro M1 16gb/2tb

I recently used Open core legacy patcher to update my old 2012 Macbook pro to run a new pice of dj software. the update went smooth but now the Dj software wont open just gives me a crash report. Im totally stumped. the crash report. Crashed Thread: 0 Dispatch queue: com.apple.main-thread Exception Type: EXC_BAD_INSTRUCTION (SIGILL) Exception Codes: 0x0000000000000001, 0x0000000000000000 Termination Reason: Namespace SIGNAL, Code 4 Illegal instruction: 4 Terminating Process: exc handler [3839] Thread 0 Crashed:: Dispatch queue: com.apple.main-thread 0 Engine DJ 0x10c9e3d81 0x10c28f000 + 7687553 1 dyld 0x7ff807632729 invocation function for block in dyld4::Loader::findAndRunAllInitializers(dyld4::RuntimeState&) const + 241 2 dyld 0x7ff80766b34e invocation function for block in dyld3::MachOAnalyzer::forEachInitializer(Diagnostics&, dyld3::MachOAnalyzer::VMAddrConverter const&, void (unsigned int) block_pointer, void const*) const + 133 3 dyld 0x7ff80765fb73 invocation function for block in dyld3::MachOFile::forEachSection(void (dyld3::MachOFile::SectionInfo const&, bool, bool&) block_pointer) const + 543 4 dyld 0x7ff80761a07b dyld3::MachOFile::forEachLoadCommand(Diagnostics&, void (load_command const*, bool&) block_pointer) const + 249 5 dyld 0x7ff80765ebe8 dyld3::MachOFile::forEachSection(void (dyld3::MachOFile::SectionInfo const&, bool, bool&) block_pointer) const + 176 6 dyld 0x7ff807661266 dyld3::MachOFile::forEachInitializerPointerSection(Diagnostics&, void (unsigned int, unsigned int, bool&) block_pointer) const + 116 7 dyld 0x7ff80766b084 dyld3::MachOAnalyzer::forEachInitializer(Diagnostics&, dyld3::MachOAnalyzer::VMAddrConverter const&, void (unsigned int) block_pointer, void const*) const + 390 8 dyld 0x7ff8076325c2 dyld4::Loader::findAndRunAllInitializers(dyld4::RuntimeState&) const + 150 9 dyld 0x7ff807638af7 dyld4::JustInTimeLoader::runInitializers(dyld4::RuntimeState&) const + 21 10 dyld 0x7ff807632928 dyld4::Loader::runInitializersBottomUp(dyld4::RuntimeState&, dyld3::Array<dyld4::Loader const*>&, dyld3::Array<dyld4::Loader const*>&) const + 276 11 dyld 0x7ff807636141 dyld4::Loader::runInitializersBottomUpPlusUpwardLinks(dyld4::RuntimeState&) const::$_0::operator()() const + 147 12 dyld 0x7ff8076329bc dyld4::Loader::runInitializersBottomUpPlusUpwardLinks(dyld4::RuntimeState&) const + 90 13 dyld 0x7ff80764e1f7 dyld4::APIs::runAllInitializersForMain() + 277 14 dyld 0x7ff80761f52e dyld4::prepare(dyld4::APIs&, dyld3::MachOAnalyzer const*) + 3433 15 dyld 0x7ff80761e792 dyld4::start(dyld4::KernelArgs*, void*, void*)::$_0::operator()() const + 572 16 dyld 0x7ff80761e27f start + 1727 Thread 1: 0 libsystem_pthread.dylib 0x7ff8079a8bcc start_wqthread + 0 Thread 2: 0 libsystem_pthread.dylib 0x7ff8079a8bcc start_wqthread + 0 Thread 0 crashed with X86 Thread State (64-bit): rax: 0x00006000012acc80 rbx: 0x00006000032b3c90 rcx: 0x00006000012acd00 rdx: 0x000000011008e000 rdi: 0x0000000000000000 rsi: 0x00006000012ac000 rbp: 0x00007ff7b3c5a9f0 rsp: 0x00007ff7b3c5a9c0 r8: 0x0000000000000002 r9: 0x000000000000001b r10: 0x00000000001ff800 r11: 0x0000000000000080 r12: 0x000000010eeae278 r13: 0x000000010c28f6e8 r14: 0x00007ff84a461050 r15: 0x00007ff84a4614a0 rip: 0x000000010c9e3d81 rfl: 0x0000000000010207 cr2: 0x0000000000000000 Logical CPU: 2 Error Code: 0x00000000 Trap Number: 6

Hello everyone, I have a small error 23. I wanted to know if you also already have this error so in the simulator it works, I have no error, but once I do in the TestFlight I have the error that appears error 23, can anyone help me on this? Thanks a lot.

I'm using flutter's inappwebview. All functions work on my simulator and phone, but when I submit for review, I get an answer saying infinite loading. How did it happen? I don't know what the problem is.

I am working with an open source watch called PineTime to implement ANCS support so users can receive iOS notifications in the watch. I am having g trouble discovering the ANCS on an iOS device. The watch is properly paired and bonded. I realize that the ANCS may not always be present, so I also subscribed to the GATT Service changed characteristic, but never received a notification/indication for a service becoming active. Is there something I am missing? Thanks!

When I open Iplaytv on my Apple TV it says refresh needed but I don’t know how

Hi (from France) I have a MacOS application which handles the App Store receipt by requesting at the url "https://buy.itunes.apple.com/verifyReceipt". From the response, I can know what are the inApps bought by the user and that suits for me. I don't know if if I must change something in my code accordingly to this TN3118. Does someone knows the response ? Best regards.

Hi All, I have created a Push Notification certificate from my Apple Developer account. After downloading the aps.cer file and adding it to my Keychain, the certificate was added successfully, but the private key is missing. Has anyone encountered a similar issue in the past? What could be causing this problem?

When user opened my application, it crashed immediately. This is crash log message from firebase. com.apple.CFNetwork.Connection EXC_BAD_ACCESS KERN_INVALID_ADDRESS After restarting iPhone, user can use my application without crash. I cannot reproduce this crash from other device. Here are .ips crash log that I changed to .txt. crashLog-2024-12-26-182447.txt crashLog-2024-12-26-182449.000.txt crashLog-2024-12-26-182535.000.txt crashLog-2024-12-26-182535.txt Do you have any idea to fix this?

Hi, I have a problem about "NSPOSIXErrorDomain Code=65 & iOS18 & Xcode 16". I used 'CocoaAsyncSocket', '~> 7.6.5'. It works fine on iOS 15.2， But it's worried on iOS 18.3. Before this, broadcasts can be obtained normally。 I had get socket Multicast Networking. Please help me .

I've got an app with several app extensions (call extension, action extension, notification service extension, message filtering extension, notification content extension). If I need to interactively debug these then I can select the scheme and run the extension within Xcode for all of them except for the notification content extension, with that I get an error dialog summary saying: Failed to install the app on the device / The provided item to be installed is not of a type that CoreDevice recognizes. Which when expanded has the blumpf posted below. Why can I not run the notification content extension, when I can run any other type of app extension? Failed to install the app on the device. Domain: com.apple.dt.CoreDeviceError Code: 3002 Failure Reason: The provided item to be installed is not of a type that CoreDevice recognizes. User Info: { DVTErrorCreationDateKey = "2024-12-27 16:39:54 +0000"; IDERunOperationFailingWorker = IDEInstallCoreDeviceWorker; NSURL = "file:///Users/Me/Library/Developer/Xcode/DerivedData/XFinity-celiagrvtevxcagztrguseawvjkl/Build/Products/Debug.Ceq.QA-iphoneos/NotificationContentExtension.appex"; } -- Event Metadata: com.apple.dt.IDERunOperationWorkerFinished : { "device_identifier" = "00008101-00115D623460001E"; "device_isCoreDevice" = 1; "device_model" = "iPhone13,3"; "device_osBuild" = "18.2 (22C152)"; "device_platform" = "com.apple.platform.iphoneos"; "device_thinningType" = "iPhone13,3"; "dvt_coredevice_version" = "397.28"; "dvt_coresimulator_version" = "993.7"; "dvt_mobiledevice_version" = "1759.40.2.100.1"; "launchSession_schemeCommand" = Run; "launchSession_state" = 1; "launchSession_targetArch" = arm64; "operation_duration_ms" = 7; "operation_errorCode" = 3002; "operation_errorDomain" = "com.apple.dt.CoreDeviceError"; "operation_errorWorker" = IDEInstallCoreDeviceWorker; "operation_name" = IDERunOperationWorkerGroup; "param_debugger_attachToExtensions" = 0; "param_debugger_attachToXPC" = 1; "param_debugger_type" = 1; "param_destination_isProxy" = 0; "param_destination_platform" = "com.apple.platform.iphoneos"; "param_diag_113575882_enable" = 0; "param_diag_MainThreadChecker_stopOnIssue" = 0; "param_diag_MallocStackLogging_enableDuringAttach" = 0; "param_diag_MallocStackLogging_enableForXPC" = 1; "param_diag_allowLocationSimulation" = 0; "param_diag_checker_tpc_enable" = 1; "param_diag_gpu_frameCapture_enable" = 0; "param_diag_gpu_shaderValidation_enable" = 0; "param_diag_gpu_validation_enable" = 0; "param_diag_guardMalloc_enable" = 0; "param_diag_memoryGraphOnResourceException" = 0; "param_diag_mtc_enable" = 0; "param_diag_queueDebugging_enable" = 1; "param_diag_runtimeProfile_generate" = 0; "param_diag_sanitizer_asan_enable" = 0; "param_diag_sanitizer_tsan_enable" = 0; "param_diag_sanitizer_tsan_stopOnIssue" = 0; "param_diag_sanitizer_ubsan_enable" = 0; "param_diag_sanitizer_ubsan_stopOnIssue" = 0; "param_diag_showNonLocalizedStrings" = 0; "param_diag_viewDebugging_enabled" = 1; "param_diag_viewDebugging_insertDylibOnLaunch" = 1; "param_install_style" = 2; "param_launcher_UID" = 2; "param_launcher_allowDeviceSensorReplayData" = 0; "param_launcher_kind" = 0; "param_launcher_style" = 0; "param_launcher_substyle" = 2; "param_runnable_appExtensionHostRunMode" = 0; "param_runnable_productType" = "com.apple.product-type.app-extension"; "param_structuredConsoleMode" = 1; "param_testing_launchedForTesting" = 0; "param_testing_suppressSimulatorApp" = 0; "param_testing_usingCLI" = 0; "sdk_canonicalName" = "iphoneos18.2"; "sdk_osVersion" = "18.2"; "sdk_variant" = iphoneos; } -- System Information macOS Version 14.7 (Build 23H124) Xcode 16.2 (23507) (Build 16C5032a) Timestamp: 2024-12-27T08:39:54-08:00

I'm try to monitor all processes by ES client. But I found the process name is different from the Activity Monitor displayed. As shown in the picture below, there are ShareSheetUI(Pages) and ShareSheetUI(Finder) processes in Activity Monitor, but I can only get the same name ShareSheetUI, I thought of many ways to display the name in parentheses, but nothing worked, so there is a way to display the process name like Activity Monitor?

Has anyone experienced frozen images when having camera on video recording mode? For example i live in Los Angeles and sometimes I like to record the sunrise or sunset or while I’m crossing a bridge but my video camera kinda freezes and doesn’t record. I’ve already checked my memory and I have more than enough to not have issues maybe it’s a setting issue? if anyone has a solution or suggestions please let me know thank you.