Hello Apple Team, I’d like to request a feature that allows users to close all background apps at once on iPhones. Currently, closing each app individually can be time-consuming, especially when many are running. A “Close All” button would greatly improve user experience and efficiency. Thank you for considering this suggestion!

Dear Apple Developer Relations Team, We are currently reviewing the documentation for the UIDesignRequiresCompatibility Info.plist key. In the documentation, there is a warning that states: "Temporarily use this key while reviewing and refining your app’s UI for the design in the latest SDKs." However, in the adoption guide for Liquid Glass: Adopting Liquid Glass, we did not see any explicit requirement to force adoption of the Liquid Glass design. We have the Gojek app, which currently uses the UIDesignRequiresCompatibility key. To ensure long-term stability, we would like clarification on the following points: Future Support of the Key: Is it safe to continue using the UIDesignRequiresCompatibility key? Can you confirm whether this key will remain supported or if there are plans for it to be deprecated/removed in future iOS versions? Liquid Glass Adoption: Our app’s design guidelines do not align with the Liquid Glass style. Can you confirm that adoption of Liquid Glass is not mandatory, and that apps can continue to use their existing custom design guidelines without any restrictions? Compatibility with iOS 26: Are there any required changes we need to make to our existing views to ensure that the UI will continue to render as it does today on iOS 26 and beyond? We want to make sure we provide the best user experience while remaining compliant with Apple’s guidelines. Your clarification would help us plan our design and development roadmap accordingly. Thank you for your support and guidance.

The bane of my existence has been designing interfaces where the whole view needs to scroll, but a portion is a List and the other portion is static. I run into this problem time and again so I was hoping someone has a good solution because we all know that embedding a List view inside ScrollView is a no-go within SwiftUI. It simply doesn't work. So what is a best practice when you need the whole screen to scroll, but a portion is a List? Use a navigation stack instead of a ScrollView? What if it's a child view of a navigation stack already?

Hi Apple developer community. I have a question a lot of users don’t like the new control center and notification center. Are you guys gonna blur the background or are you guys gonna keep it the same?

I noticed a discrepancy between the Material specifications for tvOS on the Developer page and the naming in the Design Resources (Sketch files). Which one should we consider authoritative? https://developer.apple.com/design/human-interface-guidelines/materials

I accedently removed my info.plist can someone help me make one based on this image

Our application was first published on December 16, 2012, at 11:42 PM, and has been available on the market for 13 years. Over the years, we have implemented hundreds of updates to enhance and refine the app. Our recent updates are rejected for the reason "Guideline 4.3(a) - Design - Spam" warning. How can it be for a 13 years old app. Please advice me what to do. Thanks in advance

Below is the sample css code where I render a web page in my webview screens fonts became too small after 18.4 and its so hard to read when I launch my app . Any workarounds to address this issue .sg-labels-canvas { font-size: 15px; display: flex; flex-direction: column; font-family: -apple-system, BlinkMacSystemFont, 'Helvetica Neue', Roboto, sans-serif; font-style: normal; }

I am creating a shooting game which uses Game Center for multiplayer and I want to make the Matchmaker view look different. How can I do that?

Hi Guys, I noticed that with Icon Composer when you export the icon it does not export a square image, is there any way of doing it or that's how it is now? Checking the icon on the iPhone something doesn't seem right...

Existing smartphones store multiple NFC card information. When the NFC antenna of the phone is close to the card reader, it is usually necessary to open the APP to select NFC card information or default to one card information to be transmitted to the card reader. It is not possible to quickly select or switch cards among multiple cards. For example, after using the NFC function to swipe the subway card, the phone needs to open the car access control and community access control again. It is necessary to open the mobile NFC card information management APP to select the community access control card and then swipe the mobile NFC access control, which causes inconvenience. （现有的智能手机存储多个 NFC 卡信息。当手机的NFC天线靠近读卡器时，通常需要打开APP选择NFC卡信息或默认一个卡信息传输到读卡器。无法在多张卡之间快速选择或切换卡。例如，使用NFC功能刷完地铁卡后，手机需要重新打开车内门禁和小区门禁。需要打开手机NFC卡信息管理APP选择社区门禁卡，然后刷手机NFC门禁，造成不便。） Divide the smartphone screen into multiple areas, and users can freely define corresponding NFC information for each area. When the screen is turned off and not unlocked, select NFC card information by pressing different screen areas with your fingers. When the mobile NFC is close to the card reader, the selected card information will be transmitted to the reader(将智能手机屏幕划分多个区域，每个区域手机用户可以自由定义对应NFC信息。在熄屏’不解锁的情况下，通过手指按压不同屏幕区域选择NFC卡片信息，手机NFC贴近读卡器时将选择的卡片信息传递给读卡器。) Below, the method will be further explained in conjunction with the accompanying drawings and embodiments. Figure 1 is a schematic diagram of a utility model; Figure 2 is the flowchart of the present utility model; NFC reader, 2. Mobile screen partition, 3. NFC signal in Figure 1. In Figure 2, 1. Press the area of the screen partition with your finger. 2. Place the phone close to the NFC reader. 3. The phone senses the returned NFC signal. 4. The phone detects the pressed area.（ 下面结合附图和实施例对方法进一步说明。 图1为实用新型示意图； 图2为本实用新型流程图； 图1中1.NFC读取器，2.手机屏幕分区，3.NFC信号。 图2中1.手指按压屏幕分区的区域2.手机贴近NFC读取器3.手机感应到返回的NFC信号4.手机检测到按压的区域，5.是否检测到手机用户按压区域的动作，6.检测到按压区域，根据按压区域做出匹配相对应的NFC的动作7.选择用户所需的NFC卡8.NFC卡收到信息并发出卡片信息9.NFC读卡器收到NFC卡的信息。） For example, a smartphone user has N NFC virtual cards in their phone. Users can divide the smartphone screen into N areas, distinguished as A area, B area, C area..., each area controls different NFC. When a smartphone user holds down the B area that controls NFC (such as virtual access cards) and brings the phone close to the NFC card reader (such as access control). The mobile phone will sense NFC signals (access control signals), triggering the phone to detect the area that the user is pressing. There are two possibilities. Firstly, if the user's pressing action is not detected, the NFC card corresponding to the default A zone (set as the default here) will be selected. If the user's pressing action is detected and it is detected that the pressing is in Zone B (the partition corresponding to the access card), then the NFC information corresponding to Zone B is triggered. The smartphone receives this message, and the corresponding NFC sends out a card message. The NFC card reader (access control device) receives the message and reacts (door opens).（例如，一智能手机用户手机中有N个NFC虚拟卡。用户可以将智能手机屏幕分为N个区域，分辨为A区、B区、C区······，每个区域分别控制不同的NFC。当智能手机用户按住控制NFC（如虚拟门禁卡）的B区域并将手机靠近NFC读卡器（如门禁）。手机将会感应到NFC信号（门禁信号），触发手机检测用户正在按压的区域。有两种可能性，第一没有检测到用户的按压动作则选择默认的A区（这里把A区设为默认）所对应的NFC卡。第二检测到用户的按压动作并检测出按压的是B区域（门禁卡所对应的分区），则触发B区域所对应的NFC信息。智能手机收到此信息，相对应的NFC发出卡片信息，NFC读卡器（门禁设备）收到信息，做出反应（门打开）。） 图1 image1 图2 image2

Why my app icon doesn't have effect liquid glass on ios26. My team dev still not upgrade to xcode26, so I have to export icon for them. And I don't see the effect like stroke of the detail.

As the title indicates the problem, the large title is shown but the small title in Navitation Bar view is not shown when scrolled up with iOS26 beta7. It works with iOS18 or earlier. Is this iOS26 bug?

H ello there. I just installed IOS 26 on my iPhone 15 Pro Max. But i think i found a Bug with a Widget where you have an overview of all devices and their battery. In IOS 18 when we used the Dark Theme (Dark Icons etc.) this widget was dark aswell (look at the picture) and now in IOs everything is dark except this widget. Its kinda annoying…

I am developing an app that requires calling the iPhone's Face ID module to scan users' facial data. Where can I find Apple's design resources and guidelines for Face ID? The Face ID resources available in Figma are incomplete, and I need more support. For example, in the iPhone settings, the scenario: the UI interface for scanning the user's face to collect data, specifically the circular design in the "How to Set Up Face ID" screen.

When I first tried to create a custom SF Symbol using Affinity Designer, I encountered difficulties because of two problems which have cumulated: SVG files created by Affinity Designer cannot be directly imported into the SF Symbols app because Affinity Designer totally recreates the content of tag <g id="Notes">, making so the file incompatible for later import into the SF Symbols app. So I had to manually fix that tag via a text editor in order to make the file compatible with the SF Symbols app. Because I was so focused on fixing manually the SVG file, I did not see that the actual content of my SVG file did not follow all Apple recommendations. As a consequence, I have posted this question on the forum: Struggling creating a custom SF Symbol: The provided variants are not interpolatable Finally I have found a way to create an SVG file compatible with SF Symbols using Affinity Designer, meeting the Apple recommendations, and at last perfectly suitable for further use in Xcode. You will find the solution in my reply to this post below which is actually a quasi copy/paste of my final own reply to my original post. Marc

Hi everyone, I’m new to macOS development and working on an app idea that needs a timeline-based editor interface, similar to what you see in Logic Pro or Final Cut. The UI I want to build would have: A horizontal beat ruler that follows BPM and shows beat positions Several vertical tracks stacked below it (for things like events or markers) Horizontal zooming and scrolling A preview panel on the right side that stays in sync with the timeline I’m currently trying this in SwiftUI, but I’m running into some limitations and wondering if AppKit would be a better fit, or maybe a hybrid of the two. My questions: Where should I start when building something like this? What’s the best way to make the beat ruler and all track layers scroll together? How should I handle zooming in/out and syncing the display to a BPM timeline? Is there a clean way to integrate AppKit for the timeline view while keeping SwiftUI elsewhere?

Hi, Does the iPad Playgrounds app act completely the same way as a MacBook Playground? I am developing my app on a 2020 MacBook Air M1 using Swift Playgrounds. However, since the testing is going to be done on an iPad Swift Playgrounds, I was worried if my playground would work, since it relies heavily on the screen size etc. My app runs completely perfect on MacBook Playrgounds, but doesn't work on the iPad simulator on Xcode.

Hello, I have used CPPointOfInterestTemplate for displaying data and as user scrolls using the up/down arrow, I do not see any change in the map. Is there a way to highlight the POIs as the user scrolls through the list? I need to use the map controls and zoom to check the markers on the map. Is it possible to set the zoom level of the map in CarPlay? Pls suggest on the above queries

I think in the next updates of IOS 26 that Apple should add a setting to enable/disable Liquid Glass because we all know that everybody doesnt like the new update.