General: Forums topic: Privacy & Security Apple Platform Security support document Developer > Security Enabling enhanced security for your app documentation article Creating enhanced security helper extensions documentation article Security Audit Thoughts forums post Cryptography: Forums tags: Security, Apple CryptoKit Security framework documentation Apple CryptoKit framework documentation Common Crypto man pages — For the full list of pages, run: % man -k 3cc For more information about man pages, see Reading UNIX Manual Pages. On Cryptographic Key Formats forums post SecItem attributes for keys forums post CryptoCompatibility sample code Keychain: Forums tags: Security Security > Keychain Items documentation TN3137 On Mac keychain APIs and implementations SecItem Fundamentals forums post SecItem Pitfalls and Best Practices forums post Investigating hard-to-reproduce keychain problems forums post App ID Prefix Change and Keychain Access forums post Smart cards and other secure tokens: Forums tag: CryptoTokenKit CryptoTokenKit framework documentation Mac-specific resources: Forums tags: Security Foundation, Security Interface Security Foundation framework documentation Security Interface framework documentation BSD Privilege Escalation on macOS Related: Networking Resources — This covers high-level network security, including HTTPS and TLS. Network Extension Resources — This covers low-level network security, including VPN and content filters. Code Signing Resources Notarisation Resources Trusted Execution Resources — This includes Gatekeeper. App Sandbox Resources Share and Enjoy — Quinn “The Eskimo!” @ Developer Technical Support @ Apple let myEmail = "eskimo" + "1" + "@" + "apple.com"

General: Forums topic: Privacy & Security Privacy Resources Security Resources Share and Enjoy — Quinn “The Eskimo!” @ Developer Technical Support @ Apple let myEmail = "eskimo" + "1" + "@" + "apple.com"

I have an app (currently not released on App Store) which runs on both iOS and macOS. The app has widgets for both iOS and macOS which uses user preference (set in app) into account while showing data. Before upgrading to macOS 15 (until Sonoma) widgets were working fine and app was launching correctly, but after upgrading to macOS 15 Sequoia, every time I launch the app it give popup saying '“Kontest” would like to access data from other apps. Keeping app data separate makes it easier to manage your privacy and security.' and also widgets do not get user preferences and throw the same type of error on Console application when using logging. My App group for both iOS and macOS is 'group.com.xxxxxx.yyyyy'. I am calling it as 'UserDefaults(suiteName: Constants.userDefaultsGroupID)!.bool(forKey: "shouldFetchAllEventsFromCalendar")'. Can anyone tell, what am I doing wrong here?

On macOS 26.1 (25B78) I can't give Full Disk Access to sshd-keygen-wrapper. Now my Jenkins jobs do not work because they do not have the permission to execute the necessary scripts. Until macOS 26.1 everything worked fine. I restarted the machine several times and tried to give access from Settings -> Privacy & Security -> Full Disk Access but it just does not work. I tried logging with ssh on the machine and executing a script but again nothing happened.

Hi, For some reason all implemented (and working before) App Attest code has stopped working. iOS is unable to get attestation returning "Operations could not be completed. (com.apple.devicecheck.error error 4.) (serverUnavailable)" On https://developer.apple.com/system-status/ I can see green dot but I suspect that infrastructure is not OK. This is happening with multiple of our apps in multiple geographical regions. Can anyone confirm these problems or know whether it is strictly connected to App Attest service availability?

We have a custom SecurityAgentPlugin that is triggered by multiple authorizationdb entries. Some customers report that the SecurityAgent process takes window focus even though no UI or windows are displayed. Our plugin explicitly ignores the _securityAgent user and does not show any UI for that user. However, in macOS 26.1, it appears that the plugin still causes the SecurityAgent to take focus as soon as it is triggered. Is this a change in macOS 26.1 or a bug? Can we do anything to prevent "focus stealing"?

According to https://developer.apple.com/documentation/security/app_sandbox/discovering_and_diagnosing_app_sandbox_violations it is possible to view detailed violation reports for non-system services. Is it possible to do something similar for system services? I have encountered an issue where several (all?) of my Macbooks get into a sandbox violation situation (I assume). Below is in excerpt from logs focusing just on the sandbox violation. The errors are surrounded by XPC failures and errors. error 23:23:21.382263+0100 kernel Sandbox: Family(1316) deny(1) mach-lookup com.apple.contactsd.persistence error 23:23:24.385962+0100 kernel Sandbox: Family(1316) deny(1) mach-lookup com.apple.contactsd.persistence error 23:23:27.389910+0100 kernel Sandbox: Family(1316) deny(1) mach-lookup com.apple.contactsd.persistence error 23:23:36.408940+0100 kernel Sandbox: Family(1316) deny(1) mach-lookup com.apple.contactsd.persistence error 23:23:45.419593+0100 kernel Sandbox: Family(1316) deny(1) mach-lookup com.apple.contactsd.persistence error 23:23:54.432109+0100 kernel Sandbox: Family(1316) deny(1) mach-lookup com.apple.contactsd.persistence The above is just an except, and it seems that Family, imagent and searchpartyuseragent are trying to access com.apple.contactsd.persistance once per second or so and failing (there are also some attempts to reach com.apple.timed.xpc, but an insignificant amount in comparison to com.apple.contactsd.persistance). This in turn causes Diagnostics Reporter to start, and then end hastily almost every ten seconds. fault 23:23:05.903908+0100 Diagnostics Reporter Invalid launch. fault 23:23:16.038017+0100 Diagnostics Reporter Invalid launch. fault 23:23:26.136348+0100 Diagnostics Reporter Invalid launch. fault 23:23:36.274543+0100 Diagnostics Reporter Invalid launch. fault 23:23:46.414546+0100 Diagnostics Reporter Invalid launch. I have no idea how I did this, but I seemed to have messed up sandbox access rights to contacts for some system services?

Hi Apple Developer Team, I am encountering an issue with the “Sign in with Apple” feature. While implementing this functionality in my dotnet application, I noticed that the user’s first name and last name are not being returned, even though I have explicitly requested the name scope. However, the email and other requested information are returned successfully. Here are the details of my implementation: 1. Scope Requested: name, email 2. Response Received: Email and other data are present, but fullName is missing or null. 3. Expected Behavior: I expected to receive the user’s first and last name as per the fullName scope. I have verified the implementation and ensured that the correct scopes are being passed in the request. Could you please help clarify the following? 1. Are there specific conditions under which Apple may not return the user’s fullName despite the scope being requested? 2. Is there a recommended approach or fallback mechanism to handle this scenario? 3. Could this behavior be related to a limitation or change in the API, or might it be an issue on my end? I also came to know that for initial sign in the user details will be displayed in the signin-apple payload as Form data but how do I fetch those form-data from the signin-apple request, please suggest I would greatly appreciate any guidance or solutions to resolve this issue. Thank you for your support!

Hi everyone, We are using the App Attest API to securely transition users to our new system. As part of this, we store the Key ID of the attestation key for each user to verify their identity later. However, we’ve noticed that some users are encountering the error “DCErrorInvalidKey 3” when calling generateAssertion. Importantly, the key was previously successfully attested, and generateAssertion has worked before for these users. Our questions: Could this error be caused by an app or iOS update? Is it problematic to link an attestation key's Key ID directly to a user, or are there scenarios where the key might change or become invalid? If there’s a way to mitigate this issue or recover affected users, what best practices would you recommend? Any help or shared experiences would be greatly appreciated! Thanks in advance.

I have these two pods: Frameworks/GTMSessionFetcher.framework/GTMSessionFetcher Frameworks/GoogleToolboxForMac.framework/GoogleToolboxForMac they are showing this error: ITMS-91061: Missing privacy manifest I've tried manually making privacy files, I've tried updating the SDK's too. I cant update them because firebase depends on GTM Session at a lower version and if I update, MLKit depends on toolbox (even though its deprecating) If I upgrade then the whole project explodes. What do I do. I need help. this is all I get and it doesn't help: https://developer.apple.com/support/third-party-SDK-requirements

FB18383742 Setup 🛠️ Xcode 16.4 (16F6) 📱 iPhone 13 mini (iOS 18.0.1) ⌚️ Apple Watch Series 10 (watchOS 11.3.1) Observations As AccessorySetupKit does not request "Core Bluetooth permissions", when a watchOS companion app is installed after having installed the iOS app, the toggle in the watch settings for Privacy & Security > Bluetooth is turned off and disabled After removing the iPhone associated with the Apple Watch, Bluetooth works as expected in the watchOS app Upon reinstalling the iOS app, there's a toggle for Bluetooth in the iOS ASK app's settings and the ASK picker cannot be presented 🤨 From ASK Documentation: AccessorySetupKit is available for iOS and iPadOS. The accessory’s Bluetooth permission doesn’t sync to a companion watchOS app. But this doesn't address not being able to use Core Bluetooth in a watch companion app at all 🥲 Reproducing the bug Install the iOS + watchOS apps Launch iOS app, tap "start scan", observe devices can be discovered (project is set up to find heart rate monitors) Launch watchOS, tap allow on Bluetooth permission pop-up watchOS app crashes 💥 Meanwhile, in the iOS app, there should be a log entry for 💗 CBCentralManager state: poweredOff and the ASK picker is no longer able to discover any devices The state of the device permissions: iOS app has no paired accessories or Bluetooth permission watchOS app's Bluetooth permission shown as turned off & disabled Remove the iOS app Relaunch the watchOS app Notice the CBCentralManager state is unauthorized Remove and reinstall the watchOS app Tap allow on Bluetooth permission pop-up watchOS app does not crash and CBCentralManager state is poweredOn The state of the watch permissions: Bluetooth is turned on & the toggle is not disabled Note that at this time the iOS app is not installed, there is no way to remove Bluetooth permission for the watch app. Reinstall + launch the iOS app Notice a warning in the log: [##### WARNING #####] App has companion watch app that maybe affected if using CoreBluetooth framework. Please read developer documentation for AccessorySetupKit. Notice a log entry for 💗 CBCentralManager state: poweredOn before tapping start scan Tap start scan and observe another log entry: Failed to show picker due to: The operation couldn’t be completed. (ASErrorDomain error 550.) ASErrorDomain 550: The picker can't be used because the app is in the background. Is this the expected error? 🤔 The state of the iOS permissions: The app's settings show a Bluetooth toggle normally associated with Core Bluetooth, but the app never showed a Core Bluetooth pop-up The iOS ASK app now has Core Bluetooth permission 😵‍💫 Following up with Apple This is a known bug that should be fixed in watchOS 26 when Bluetooth permissions for watch apps can be set independently of the iOS app. I've yet to test it with watchOS 26. See repo for the same post with screenshots of the settings and demo code reproducing the bug: https://github.com/superturboryan/AccessorySetupKit-CoreBluetooth-watchOS-Demo

While working with Platform SSO on macOS, I’m trying to better understand how the system handles cases where a user’s local account password becomes unsynchronized with their Identity Provider (IdP) password—for example, when the device is offline during a password change. My assumption is that macOS may store some form of persistent token during the Platform SSO user registration process (such as a certificate or similar credential), and that this token could allow the system to unlock the user’s login keychain even if the local password no longer matches the IdP password. I’m hoping to get clarification on the following: Does macOS actually use a persistent token to unlock the login keychain when the local account password is out of sync with the IdP password? If so, how is that mechanism designed to work? If such a capability exists, is it something developers can leverage to enable a true passwordless authentication experience at the login window and lock screen (i.e., avoiding the need for a local password fallback)? I’m trying to confirm what macOS officially supports so I can understand whether passwordless login is achievable using the persistent-token approach. Thanks in advance for any clarification.

During internal testing, we observed the following behavior and would appreciate clarification on whether it is expected and supported in production environments. When generating an elliptic-curve cryptographic key pair using "kSecAttrTokenIDSecureEnclave", and explicitly specifying a "kSecAttrAccessGroup", we found that cryptographic operations (specifically encryption and decryption) could be successfully performed using this key pair from two distinct applications. Both applications had the Keychain Sharing capability enabled and were signed with the same provisioning profile identity. Given the documented security properties of Secure Enclave, backed keys, namely that private key material is protected by hardware and access is strictly constrained by design, we would like to confirm whether the ability for multiple applications (sharing the same keychain access group and signing identity) to perform cryptographic operations with the same Secure Enclave–backed key is expected behavior on iOS. Specifically, we are seeking confirmation on: Whether this behavior is intentional and supported in production. Whether the Secure Enclave enforces access control primarily at the application-identifier (App ID) level rather than the individual app bundle level in this scenario. Whether there are any documented limitations or guarantees regarding cross-application usage of Secure Enclave keys when keychain sharing is configured. Any guidance or references to official documentation clarifying this behavior would be greatly appreciated.

I now had the second user with 26.2. complaining about a hang in my app. The hang occurs when the first AppleScript for Mail is run. Here is the relevant section from the process analysis in Activity Monitor: + 2443 OSACompile (in OpenScripting) + 52 [0x1b32b30f4] + 2443 SecurityPolicyTestDescriptor (in OpenScripting) + 152 [0x1b32a2284] + 2443 _SecurityPolicyTest(char const*, void const*, unsigned long) (in OpenScripting) + 332 [0x1b32a2118] + 2443 InterpreterSecurity_ScanBuffer (in libInterpreterSecurity.dylib) + 112 [0x28c149304] + 2443 -[InterpreterSecurity scanData:withSourceURL:] (in libInterpreterSecurity.dylib) + 164 [0x28c148db4] + 2443 -[XProtectScan beginAnalysisWithFeedback:] (in XprotectFramework) + 544 [0x1d35a1e58] + 2443 -[XPMalwareEvaluation initWithData:assessmentClass:] (in XprotectFramework) + 92 [0x1d359ada4] + 2443 -[XPMalwareEvaluation initWithRuleString:withExtraRules:withURL:withData:withAssessmentClass:feedback:] (in XprotectFramework) + 36 [0x1d359b2a8] My app is correctly signed and notarised. The first user had to completely uninstall/reinstall the app and the everything worked again. Why does this happen? How can the problem be fixed?

Please excuse my lack of understanding of what are probably fundamental concepts in iOS/iPadOS development but I have searched far and wide for documentation and haven't had much luck so far. I am not sure that what I want to do is even possible with an iPad iPadOS app. Goals: Develop a Swift iPadOS app that can digitally sign a file using a PIV SmartCard/Token (Personal Identity Verification Card): Insert a PIV SmartCard/Token (such as a Yubikey 5Ci) into the lightning port of an iPadOS device iPad (NOT MacOS) Interface with the SmartCard/Token to access the user's PIV certificate/signature and "use it" to sign a file Question 1: How to get the PIV Certificate from SmartCard/Token/Yubikey into iPadOS keychain?   * Do we need to get the PIV certificate into the iOS keychain? Is there another way to interact with a SmartCard directly?   * This should prompt the user for their PIN? Question 2: How to get our Swift app to hook into the event that the SmartCard/Token is inserted into the device and then interface with the user's certificate?   * When is the user prompted to enter their PIN for SmartCard/Token/Yubikey?   * Do we need to use CyrptoTokenKit to interface with a smartcard inserted into the lightning port of an iOS device?

I recently turned on the enhanced security options for my macOS app in Xcode 26.0.1 by adding the Enhanced Security capability in the Signing and Capabilities tab. Then, Xcode adds the following key-value sets (with some other key-values) to my app's entitlements file. <key>com.apple.security.hardened-process.enhanced-security-version</key> <integer>1</integer> <key>com.apple.security.hardened-process.platform-restrictions</key> <integer>2</integer> These values appear following the documentation about the enhanced security feature (Enabling enhanced security for your app) and the app works without any issues. However, when I submitted a new version to the Mac App Store, my submission was rejected, and I received the following message from the App Review team via the App Store Connect. Guideline 2.4.5(i) - Performance Your app incorrectly implements sandboxing, or it contains one or more entitlements with invalid values. Please review the included entitlements and sandboxing documentation and resolve this issue before resubmitting a new binary. Entitlement "com.apple.security.hardened-process.enhanced-security-version" value must be boolean and true. Entitlement "com.apple.security.hardened-process.platform-restrictions" value must be boolean and true. When I changed those values directly in the entitlements file based on this message, the app appears to still work. However, these settings are against the description in the documentation I mentioned above and against the settings Xcode inserted after changing the GUI setting view. So, my question is, which settings are actually correct to enable the Enhanced Security and the Additional Runtime Platform Restrictions?

I'm trying to export and re-import a P-256 private key that was originally generated via SecKeyCreateRandomKey(), but I keep running into roadblocks. The key is simply exported via SecItemExport() with format formatWrappedPKCS8, and I did set a password just to be sure. Do note that I must use the file-based keychain, as the data protection keychain requires a restricted entitlement and I'm not going to pay a yearly fee just to securely store some private keys for a personal project. The 7-day limit for unsigned/self-signed binaries isn't feasible either. Here's pretty much everything I could think of trying: Simply using SecItemImport() does import the key, but I cannot set kSecAttrLabel and more importantly: kSecAttrApplicationTag. There just isn't any way to pass these attributes upfront, so it's always imported as Imported Private Key with an empty comment. Keys don't support many attributes to begin with and I need something that's unique to my program but shared across all the relevant key entries, otherwise it's impossible to query for only my program's keys. kSecAttrLabel is already used for something else and is always unique, which really only leaves kSecAttrApplicationTag. I've already accepted that this can be changed via Keychain Access, as this attribute should end up as the entry's comment. At least, that's how it works with SecKeyCreateRandomKey() and SecItemCopyMatching(). I'm trying to get that same behaviour for imports. Running SecItemUpdate() afterwards to set these 2 attributes doesn't work either, as now the kSecAttrApplicationTag is suddenly used for the entry's label instead of the comment. Even setting kSecAttrComment (just to be certain) doesn't change the comment. I think kSecAttrApplicationTag might be a creation-time attribute only, and since SecItemImport() already created a SecKey I will never be able to set this. It likely falls back to updating the label because it needs to target something that is still mutable? Using SecItemImport() with a nil keychain (i.e. create a transient key), then persisting that with SecItemAdd() via kSecValueRef does allow me to set the 2 attributes, but now the ACL is lost. Or more precise: the ACL does seem to exist as any OS prompts do show the label I originally set for the ACL, but in Keychain Access it shows as Allow all applications to access this item. I'm looking to enable Confirm before allowing access and add my own program to the Always allow access by these applications list. Private keys outright being open to all programs is of course not acceptable, and I can indeed access them from other programs without any prompts. Changing the ACL via SecKeychainItemSetAccess() after SecItemAdd() doesn't seem to do anything. It apparently succeeds but nothing changes. I also reopened Keychain Access to make sure it's not a UI "caching" issue. Creating a transient key first, then getting the raw key via SecKeyCopyExternalRepresentation() and passing that to SecItemAdd() via kSecValueData results in The specified attribute does not exist. This error only disappears if I remove almost all of the attributes. I can pass only kSecValueData, kSecClass and kSecAttrApplicationTag, but then I get The specified item already exists in the keychain errors. I found a doc that explains what determines uniqueness, so here are the rest of the attributes I'm using for SecItemAdd(): kSecClass: not mentioned as part of the primary key but still required, otherwise you'll get One or more parameters passed to a function were not valid. kSecAttrLabel: needed for my use case and not part of the primary key either, but as I said this results in The specified attribute does not exist. kSecAttrApplicationLabel: The specified attribute does not exist. As I understand it this should be the SHA1 hash of the public key, passed as Data. Just omitting it would certainly be an option if the other attributes actually worked, but right now I'm passing it to try and construct a truly unique primary key. kSecAttrApplicationTag: The specified item already exists in the keychain. kSecAttrKeySizeInBits: The specified attribute does not exist. kSecAttrEffectiveKeySize: The specified attribute does not exist. kSecAttrKeyClass: The specified attribute does not exist. kSecAttrKeyType: The specified attribute does not exist. It looks like only kSecAttrApplicationTag is accepted, but still ignored for the primary key. Even entering something that is guaranteed to be unique still results in The specified item already exists in the keychain, so I think might actually be targeting literally any key. I decided to create a completely new keychain and import it there (which does succeed), but the key is completely broken. There's no Kind and Usage at the top of Keychain Access and the table view just below it shows symmetric key instead of private. The kSecAttrApplicationTag I'm passing is still being used as the label instead of the comment and there's no ACL. I can't even delete this key because Keychain Access complains that A missing value was detected. It seems like the key doesn't really contain anything unique for its primary key, so it will always match any existing key. Using SecKeyCreateWithData() and then using that key as the kSecValueRef for SecItemAdd() results in A required entitlement isn't present. I also have to add kSecUseDataProtectionKeychain: false to SecItemAdd() (even though that should already be the default) but then I get The specified item is no longer valid. It may have been deleted from the keychain. This occurs even if I decrypt the PKCS8 manually instead of via SecItemImport(), so it's at least not like it's detecting the transient key somehow. No combination of kSecAttrIsPermanent, kSecUseDataProtectionKeychain and kSecUseKeychain on either SecKeyCreateWithData() or SecItemAdd() changes anything. I also tried PKCS12 despite that it always expects an "identity" (key + cert), while I only have (and need) a private key. Exporting as formatPKCS12 and importing it with itemTypeAggregate (or itemTypeUnknown) does import the key, and now it's only missing the kSecAttrApplicationTag as the original label is automatically included in the PKCS12. The outItems parameter contains an empty list though, which sort of makes sense because I'm not importing a full "identity". I can at least target the key by kSecAttrLabel for SecItemUpdate(), but any attempt to update the comment once again changes the label so it's not really any better than before. SecPKCS12Import() doesn't even import anything at all, even though it does return errSecSuccess while also passing kSecImportExportKeychain explicitly. Is there literally no way?

Hi Apple, Currently we want to have enhancement for SMS OTP that we want to implement OTP Autofill, But after do some research we're stuck with option that the OTP only show in keyboard suggestion, is there any way for making OTP is automatically filled without user have to click the keyboard suggestion when receiving the SMS. Thanks Best Regards, Admiral Sultano Harly.

I have a binary executable which needs to be given Accessibility Permissions so it can inject keypresses and mouse moves. This was always possible up to macOS 15 - when the first keypress arrived the Accessibility Permissions window would open and allow me to add the executable. However this no longer works in macOS 26: the window still opens, I navigate to the executable file and select it but it doesn't appear in the list. No error message appears. I'm guessing that this may be due to some tightening of security in Tahoe but I need to figure out what to change with my executable to allow it to work.

Hi, In our app we are using DeviceCheck (App Attest) in a production environment iOS. The service works correctly for most users, but a user reported failure in a flow that use device check service. This failure is not intermittently, it is constant. We are unable to reproduce this failure and we are believing that this failure occurred by new version ios 26.3 because for others users using early versions the service is normally. Environment iOS 26.3 Real device App Attest capability enabled Correct App ID, Team ID and App Attest entitlement Production environment Characteristics: appears constantly affects only unique user -Don't resolves after time or reinstall not reproducible on our test devices NSError contains no additional diagnostic info (Error Domain=com.apple.devicecheck.error Code=3 "(null)") We saw about this error code 3 in this post 812308, but it's not our case because the ios version in this case is not iOS 17.0 or earlier. Please, help us any guidance for solution. Thank you

Hi! Is it possible to disable the option for users to 'Sign in with Another Device'? I encounter this message during the authentication process and I want to prevent it from appearing. I appreciate your help and look forward to your response.

Since around March 4, 2025 off and on, we've been receiving 500 errors back from the validate_device_token endpoint on development and production. Today (March 6) we are constantly getting 500 error back. https://api.development.devicecheck.apple.com/v1/validate_device_token This was working previously before then. No change has happened on our end since then. This is a critical piece for our infrastructure. Thanks in advance. -Matt