We have a subscription WeatherKit app which has been on the App Store since December 2023. I am getting intermittent JWT auth failures on customer devices. In the great majority of cases, the request succeeds, but sometimes it fails, and sometimes it fails and never recovers. I’m working with a customer right now who is unable to get any weather data at all, and the logs he sends me show WeatherDaemon.WDSJWTAuthenticatorServiceListener.Errors error 2 The app uses the WeatherKit SDK (we are not using the REST API directly). We know we have the project setup as it has been working since launch, and I can verify weatherkit using security cms -D -i embedded.mobileprovision It it not a problem with the specific query, since I can get data for the dates and locations they are requesting. I can’t replicate the problem on my test devices. In case there is a rate limit issue: this app is a bit unusual and downloads an unusual amount of data at once using multiple queries in parallel using a TaskGroup. When the user creates a location, the app downloads a 10 day block of weather (7 days in the past + 3 day forecast) using WeatherService.shared.weather( for: location, including: WeatherQuery.daily( startDate: startDate, endDate: endDate ), WeatherQuery.hourly( startDate: startDate, endDate: endDate ) ) It also downloads about 2 months of daily precipitation data using multiple parallel calls to dailySummary in 10 day blocks: WeatherService.shared.dailySummary( for: location, forDaysIn: DateInterval(start: startDate, end: endDate), including: .precipitation ) In almost every case, including on my test devices, this works. But some users get WeatherDaemon.WDSJWTAuthenticatorServiceListener.Errors error 2 on every request. The two users yesterday that had this problem were both on iOS 18.5 for what that's worth, though the app supports 17.2+ Is anyone else seeing this? And can anyone suggest anything else to explore? It's obviously a terrible experience for customers who pay for the service and are unable to get any data. I did submit this info to Apple as FB18276275

Hi and help needed! I updated my iPhone 16 Pro max to iOs 26. When I go to the software update section, the beta developer tab is gone, and it says "Unable to check for update" I reset my network settings and restarted the device. No change. Any help would be appreciated.

I created a ShieldConfigurationExtension in Xcode 14.3 with File > New > Target > ShieldConfigurationExtension. This created the extension with all the necessary Info.plist values (correct NSExtensionPrincipalClass, etc.), with the extension included in embedded content in the host app target. No matter what I try, the extension is not getting invoked when I shield applications from my host app. The custom UI does not show as the shield, and looking at the debugger, an extension process is never invoked. I am shielding categories like this: let managedSettings = ManagedSettingsStore() ... managedSettings.shield.applicationCategories = .all() And my extension code overrides all the ShieldConfigurationDataSource functions. class ShieldConfigurationExtension: ShieldConfigurationDataSource { override func configuration(shielding application: Application) -> ShieldConfiguration { return ShieldConfiguration( backgroundBlurStyle: UIBlurEffect.Style.systemThickMaterial, backgroundColor: UIColor.white, icon: UIImage(systemName: "stopwatch"), title: ShieldConfiguration.Label(text: "You are in a Present Session", color: .yellow) ) } override func configuration(shielding application: Application, in category: ActivityCategory) -> ShieldConfiguration { return ShieldConfiguration( backgroundBlurStyle: UIBlurEffect.Style.systemThickMaterial, backgroundColor: UIColor.white, icon: UIImage(systemName: "stopwatch"), title: ShieldConfiguration.Label(text: "You are in a Present Session", color: .yellow) ) } override func configuration(shielding webDomain: WebDomain) -> ShieldConfiguration { return ShieldConfiguration( backgroundBlurStyle: UIBlurEffect.Style.systemThickMaterial, backgroundColor: UIColor.white, icon: UIImage(systemName: "stopwatch"), title: ShieldConfiguration.Label(text: "You are in a Present Session", color: .yellow) ) } override func configuration(shielding webDomain: WebDomain, in category: ActivityCategory) -> ShieldConfiguration { return ShieldConfiguration( backgroundBlurStyle: UIBlurEffect.Style.systemThickMaterial, backgroundColor: UIColor.white, icon: UIImage(systemName: "stopwatch"), title: ShieldConfiguration.Label(text: "You are in a Present Session", color: .yellow) ) } } What am I missing?

Could someone please explain how to use a custom sound when setting up an alarm using AlarmKit? It keeps playing a default sound. Also, I keep having an issue where the alarm sound plays but doesn’t show the alarm interface buttons unless the screen is locked.

Hello, We have a Push-to-Talk (PTT) application that is already well established and widely used. Our app has the proper VoIP entitlement, which we are using to wake up the app and establish a WebSocket connection for real-time communication. We are also using CallKit as a supporting mechanism, but not as the primary interaction upon receiving the VoIP Push, since our use case differs from traditional full-duplex VoIP calls. While our implementation works correctly in many cases, we have noticed a consistent issue where, after multiple VoIP Push notifications, the system still delivers the push, but prevents the WebSocket from reconnecting. At this point, all connection attempts return errors such as: • "Software caused connection abort" This issue persists until the app is manually relaunched, after which the behavior resets and repeats. We are aware that VoIP Push was originally designed for full-duplex calls, but since Apple allows its use for other purposes through the entitlement, we would like to understand why this limitation is occurring and how to handle it properly. Questions: 1. Is iOS enforcing stricter background execution rules after multiple VoIP Push events within a short period? 2. Are there any recommended best practices to ensure reliable WebSocket reconnection in this scenario?

I've recently published an app, and while developing it, I could always get consistent entitlements from Transaction.currentEntitlements. But now I see some inconsistent behaviour for a subscribed device in the AppStore version. It looks like sometimes the entitlements do not emit value for the subscriptions. It usually happens on the first couple tries when the device goes offline, or on the first couple tries when the device goes online. But it also happens randomly at other times as well. Can there be a problem with Transaction.currentEntitlements when the connectivity was just changed? Of course my implementation may also be broken. I will give you the details of my implementation below. I have a SubscriptionManager that is observable (irrelevant parts of the entity is omitted): final class SubscriptionManager: NSObject, ObservableObject { private let productIds = ["yearly", "monthly"] private(set) var purchasedProductIDs = Set<String>() var hasUnlockedPro: Bool { return !self.purchasedProductIDs.isEmpty } @MainActor func updatePurchasedProducts() async { var purchasedProductIDs = Set<String>() for await result in Transaction.currentEntitlements { guard case .verified(let transaction) = result else { continue } if transaction.revocationDate == nil { purchasedProductIDs.insert(transaction.productID) } else { purchasedProductIDs.remove(transaction.productID) } } // only update if changed to avoid unnecessary published triggers if purchasedProductIDs != self.purchasedProductIDs { self.purchasedProductIDs = purchasedProductIDs } } } And I call the updatePurchasedProducts() when the app first launches in AppDelegate, before returning true on didFinishLaunchingWithOptions as: Task(priority: .high) { await DependencyContainer.shared.subscriptionManager.updatePurchasedProducts() } You may be wondering maybe the request is not finished yet and I fail to refresh my UI, but it is not the case. Because later on, every time I do something related to a subscribed content, I check the hasUnlockedPro computed property of the subscription manager, which still returns false, meaning the purchasedProductIDs is empty. You may also be curious about the dependency container approach, but I ensured by testing multiple times that there is only one instance of the SubscriptionManager at all times in the app. Which makes me think maybe there is something wrong with Transaction.currentEntitlements I would appreciate any help regarding this problem, or would like to know if anyone else experienced similar problems.

is there any error in sandbox auto renewal when Im test a app subscription automatically cancelled

Some of our users encounter an issue after updating their iPhone/iPad to iOS 17.5.1. The tokens passed in the Shield Configuration extension don't match the tokens they selected in my app using the FamilyPicker before updating to iOS 17.5.1. It seems the tokens changed for no reason. My app can't match the token from the ShieldConfigurationDataSource to any tokens stored on my end, causing my shield screens to turn blank. The same applies to tokens in the Device Activity Report extension. The only workaround I've found is to tell affected users to unselect and reselect apps and websites to block in my app. This gets them new tokens from the FamilyActivityPicker, which solves the issue. However, for some users, the bug reoccurs a few days later. Tokens seem to change again, causing the same issue in the Shield Configuration extension. I am not able to reproduce the issue on my test devices so I have no sysdiagnose to attach. However, this issue is affecting other screen time apps: https://developer.apple.com/forums/thread/732845 https://forums.developer.apple.com/forums/thread/756440 FB14082790 FB14111223 A change in iOS 17.5.1 must have triggered this behaviour. Could an Apple engineer give us any updates on this?

Prior to iOS 14 our Dev server was routing universal links to our test devices just fine from both Xcode and TestFlight builds. But now that we've started testing on iOS 14 devices the links aren't being handled any more. After doing some research we noticed the new configuration regarding Associated Domains for web servers that aren't reachable from the public internet. https://developer.apple.com/documentation/safariservices/supporting_associated_domains Starting with macOS 11 and iOS 14, apps no longer send requests for apple-app-site-association files directly to your web server. Instead, they send these requests to an Apple-managed content delivery network (CDN) dedicated to associated domains. While you’re developing your app, if your web server is unreachable from the public internet, you can use the alternate mode feature to bypass the CDN and connect directly to your private domain.You enable an alternate mode by adding a query string to your associated domain’s entitlement as follows: <service>:<fully qualified domain>?mode=<alternate mode> Given our Dev server is only reachable via a VPN we changed our project config to use the alternate mode: <key>com.apple.developer.associated-domains</key> <array> <string>webcredentials:ourDevServerURL?mode=developer</string> <string>applinks:ourDevServerURL?mode=developer</string> </array> But unfortunately that still doesn't work and in the console we can see the following swcd logs being generated after a fresh app install. debug com.apple.swc 11:45:19.016561-0600 swcd entry Skipping domain si….va….com?mode=developer because developer mode is disabled So what else do we need to get developer mode working for these app links?

有一个用户反馈7月8日充值了3笔后一直无法发起新的购买，总是提示已经购买。我们查了是之前的交易无法结束，我们使用StoreKit2，已经调用await transaction.finish()成功结束交易了，但是每次发起新支付时，Transaction.unfinished还会返回之前已完成的交易信息。 是设备或AppleID的问题么？用户尝试了重启设备、重新登录AppleID都没用。有什么办法解决呢？ 用户无法结束的苹果交易id为：200002703899379、200002703900716、200002703902023。 A user reported that after making 3 purchases on July 8th, they have been unable to initiate new purchases, always receiving a prompt that the item has already been purchased. Upon investigation, we found that the previous transactions couldn't be finalized. We use StoreKit2 and have successfully called await transaction.finish() to end the transactions. However, every time a new payment is initiated, Transaction.unfinished still returns information about the previously completed transactions. Could this be an issue with the device or Apple ID? The user has tried restarting the device and re-logging into their Apple ID, but these attempts were unsuccessful. Is there any way to resolve this? The Apple transaction IDs that the user is unable to finalize are: 200002703899379, 200002703900716, 200002703902023.

I’m implementing App Store subscriptions using StoreKit 2 and testing in the Sandbox environment. Until about a week ago everything worked fine, but recently the Settings > Subscriptions screen shows this message for my test account: “Your current payment method is not available.” The behavior: • Using a Sandbox tester account (not a production Apple ID) • Purchase flow works successfully — the transaction completes, and I receive server notifications • However, the system Settings app still displays that message under the subscription entry • No code changes were made since it last worked Questions: 1. What exactly does this message mean in the Sandbox environment? 2. Could this be related to any Apple system issue or recent backend update? 3. Has anyone else seen the same behavior in recent days? Environment: • Xcode 15.4 • iOS 17.5 (physical device) • StoreKit 2 / Swift 5.10 • Sandbox tester (Japan region) Thanks in advance for any insights or confirmations from others who are testing subscriptions in Sandbox!

On an app that was using the old API for In-App Purchases (StoreKit 1). The app is already published on the App Store. The purchase is non-consumable. While trying to migrate to StoreKit 2, I'm unable to restore purchases. Specifically displaying and purchasing products works as expected, but when deleting and reinstalling the app, and then trying to restore purchases I can't do it. I'm trying to restore them using the new APIs but it doesn't seem to be working. What I have tried so far: I'm listening for transaction updates during the whole lifetime of the app, with: Task.detached { for await result in Transaction.updates { if case let .verified(safe) = result { } } } I have a button that calls this method, but other than prompting to log in again with the Apple ID it doesn't seem to have any effect at all: try? await AppStore.sync() This doesn't return any item for await result in Transaction.currentEntitlements { if case let .verified(transaction) = result { } } This doesn't return any item for await result in Transaction.all { if case let .verified(transaction) = result { } } As mentioned before I'm trying this after purchasing the item and deleting the app. So I'm sure it should be able to restore the purchase. Am trying this both with a Configuration.storekit file on the simulator, and without it on a real device, in the Sandbox Environment. Has anyone being able to restore purchases using StoreKit 2? PD: I already filed a feedback report on Feedback Assistant, but so far the only thing that they have replied is: Because StoreKit Testing in Xcode is a local environment, and the data is tied to the app, when you delete the app you're also deleting all the transaction data for that app in the Xcode environment. The code snippets provided are correct usage of the API. So yes, using a Configuration.storekit file won't work on restoring purchases, but if I can't restore them on the Sandbox Environment I'm afraid that this won't work once released, leaving my users totally unable to restore what they have already purchased.

As of iOS 18.1 being released we are having issues with our users experiencing issues with our app that relies on strobing the device torch. We have narrowed this down to being caused on devices with adaptive true-tone flash and have submitted a radar: FB15787160. The issue seems to be caused by ambient light levels. If run in a dark room, the torch strobes exactly as effectively as in previous iOS versions, if run in a light room, or outdoors, or near a window, the strobe will run for ~1s and then the torch will get stuck on for half a second or so (less frequently it gets stuck off) and then it will strobe again for ~1s and this behaviour repeats indefinitely. If we go to a darker environment, and background and then foreground the app (this is required) the issue is resolved, until moving to an area with higher ambient light levels again. We have done a lot of debugging, and also discovered that turning off "Auto-Brightness" from Settings -> Accessibility -> Display & Text Size resolves the issue. We have also viewed logs from Console.app at the time of the issue occurring and it seems to be that there are quite sporadic ambient light level readings at the time at which the issue occurs. The light readings transition from ~100 Lux to ~8000 Lux at the point that the issue starts occurring (seemingly caused by the rear sensor being affected by the torch). With "Auto-Brightness" turned off, it seems these readings stay at lower levels. This is rendering the primary use case of our app essentially useless, would be great to get to the bottom of it! We can't even really detect it in-app as I believe using SensorKit is restricted to research applications and requires a review process with Apple before accessing? Edit: It's worth noting this is also affecting other apps with strobe functionality in the exact same way

Hello, When attempting to assign the UNNotificationResponse to a Published property on the main thread inside UNUserNotificationCenterDelegate's method func userNotificationCenter(_ center: UNUserNotificationCenter, didReceive response: UNNotificationResponse) async both Task { @MainActor in } and await MainActor.run are throwing a NSInternalInconsistencyException: 'Call must be made on main thread'. I thought both of them were essentially doing the same thing, i.e. call their closure on the main thread. So why is this exception thrown? Is my understanding of the MainActor still incorrect, or is this a bug? Thank you Note: Task { await MainActor.run { ... } } and DispatchQueue.main.async don't throw any exception.

I have an app using weatherkit and its currently live and up on the app store, recently I had some users report to me that they had been receiving errors loading weather data, I had error handling built in and it reported an issue with apples authentication server Failed to generate jwt token for: com.apple.weatherkit.authservice with error: Error Domain=WeatherDaemon.WDSJWTAuthenticatorServiceListener.Errors Code=2 "(null)" I have not come across this during the development lifecycle of my project, there where no codebase changes, it just stopped functioning. The app entitlements are valid and correct, Weatherkit is enabled in both xcode and across my Certs, identifiers and profiles. I was not experiencing this issue until I reinstalled the app from the app store completly by first removing it and then re-installing fresh. Hard reboots do not help and I do not want to start suggesting to my users to factory reset their devices. We are using WeatherKit in both our main app and widget, relying entirely on Apple’s framework for authentication and token management. We do not generate or inject our own JWT tokens; all token handling is managed by WeatherKit. We have implemented a debug menu with the following actions: Clear WeatherKit JWT tokens from the keychain Clear all related UserDefaults key Clear all app group data and all UserDefaults. Perform a “nuclear” cache clear (removes all app data, keychain, and cached files). We log all WeatherKit fetch attempts and failures, including authentication errors, both in the app and widget and get nothing but code 2. We have attempted all of the above steps, but continue to experience issues with WeatherKit JWT authentication We would appreciate any guidance or insight into what else could be causing persistent WeatherKit JWT/authentication issues, or if there are any additional steps we should try. P.S. - Tested and experiencing the same issues on an iPhone 15 Pro Max and iPhone 15 The Pro Max is on the iOS 26 Beta // and the 15 is on the latest iOS 18

Recently I've been working on a demo project called iLibrary. The main goal was to learn more about CloudKit and SwiftData. After a while I noticed that there were some hangs/freezes when running the app in debug mode. I first tried this with Xcode 15.4 and iOS 17.5. Here the hang only appears at the beginning, but only for a few seconds. But when I exit debug mode, there are no more hangs. With Xcode 16 beta 4 and iOS 18 it looks completely different. In this case, the hangs and freezes are always present, whether in debug mode or not. And it's not just at the beginning, it's throughout the app. I'm aware that this is still a beta, but I still find this weird. And when I profile this I see that the main thread gets quite overloaded. Interestingly, my app doesn't have that many operations going on. So I guess something with the sync of SwiftData or my CloudKitManger where I fetch some records from the public database is not running fine. Lastly, I wanted to delete the iCloud app data. So I went to Settings and tried to delete it, but it didn't work. Is this normal? Does anyone have any idea what this could be? Or has anyone encountered this problem as well? I'd appreciate any support. My project: https://github.com/romanindermuehle/iLibrary

Prior to Sequoia, Mac Catalyst Apps worked fine when using group folders that started with group. They now get an alert that the Mac Catalyst app is trying to access data from other applications. This may also impact some SwiftUI developers. According to this the documentation for the App Group Entitlements entitlement, on macOS we should begin use the Team Identifier instead of group. Should Mac Catalyst follow the macOS or iOS rules for com.apple.security.application-groups? If they should need to follow the macOS rules now, that creates several issues for developers. We would now need separate build targets to pick up the different Entitlements files. More distressing is that we would need to do some kind of migration process to get our files to the new location. There wouldn't be a transparent way to do so where the user wasn't warned about the application accessing files that don't belong to it. Any clarification on what Mac Catalyst developers should be doing to prepare for Sequoia would be greatly appreciated.

https://developer.apple.com/documentation/appstoreserverapi/send_consumption_information If the customer provided consent, respond by calling this API and sending the consumption data in the ConsumptionRequest to the App Store. If not, respond by calling this API and setting the customerConsented value to false in the ConsumptionRequest; don't send any other information. Since our server would be receiving CONSUMPTION_REQUEST server notifications and will be the one calling the Consumption API, how do we know if the user has provided consent? That info doesn't seem to be in the server notification or anywhere else.

Hello, I think it is quite a common use-case to open the parent app that owns the ShieldActionDelegate when the user selects an action in the Shield. There are only three options available that we can do in response to an action: ShieldActionResponse.none ShieldActionResponse.close ShieldActionResponse.defer It would be great if this new one would be added as well: ShieldActionResponse.openParentApp While finding a workaround for now, the problem is that the ShieldActionDelegate is not a normal app extension. That means, normal tricks do not work to open the parent app from here. For example, UIApplication.shared.open(url) does not work because we can’t access UIApplication from the ShieldActionDelegate unfortunately. NSExtensionContext is also not available in the ShieldActionDelegate unfortunately, so that’s also not possible. There are apps however, that managed to find a workaround, in my research I stumbled across these two: https://apps.apple.com/de/app/applocker-passcode-lock-apps/id1132845904?l=en-GB https://apps.apple.com/us/app/app-lock/id6448239603 Please find a screen recording (gif) attached. Their workaround is 100% what I’m looking for, so there MUST be a way to do so that is compliant with the App Store guidelines (after all, the apps are available on the App Store!). I had documented my feature request more than 2 years ago in this radar as well: FB10393561

Triggered by Thread: 0 Thread 0 Crashed: 0 dyld 0x1a87922b0 lsl::PreallocatedAllocatorLayout<278528ull>::init(char const**, char const**, void*) + 436 1 dyld 0x1a878ba38 start + 1960 Thread 0 crashed with ARM Thread State (64-bit): x0: 0x2010003030100000 x1: 0x0000000fffffc0d0 x2: 0x0000000000000004 x3: 0x00000001a87607a9 x4: 0x0000000000000000 x5: 0x0000000000000000 x6: 0x0000000000000000 x7: 0x0000000000000000 x8: 0x2010003030100000 x9: 0x2010003030100000 x10: 0x000000016d923dfd x11: 0x00000001a87ccf30 x12: 0x0000000000000050 x13: 0x0000000000000044 x14: 0x0000000000052010 x15: 0x0000000000000000 x16: 0x0000000000000000 x17: 0x0000000000000000 x18: 0x0000000000000000 x19: 0x00000001801d0000 x20: 0x000000016d923b50 x21: 0x000000016d923af8 x22: 0x00000001e6184050 x23: 0x000000016d9237d8 x24: 0x0000000fffffc10c x25: 0x0000000000000000 x26: 0x0000000000000000 x27: 0x0000000000000000 x28: 0x0000000000000000 fp: 0x000000016d923870 lr: 0xb0228001a8792130 sp: 0x000000016d9237d0 pc: 0x00000001a87922b0 cpsr: 0x60001000 far: 0x00000001e61840e0 esr: 0x92000047 (Data Abort) byte write Translation fault Binary Images: 0x1a8758000 - 0x1a87db693 dyld arm64e <77c1eed22ed7396aba34e770120d81d4> /usr/lib/dyld 0x1024dc000 - 0x10594ffff main_executable_path_missing arm64 /main_executable_path_missing 0x0 - 0xffffffffffffffff ??? unknown-arch <00000000000000000000000000000000> ??? Error Formulating Crash Report: dyld_process_snapshot_get_shared_cache failed EOF crash.log