How do I replace an Apple Developer ID Certificate that indicates it is not trusted? When I look at my Certificate Expiring 02-20-2025, I see a valid status displayed. (See annotation #1.) However, when I look at my Apple Developer ID Certificate renewal, I see the words not trusted. (See annotation #2.) I downloaded the renewal certificate and double double-clicked the downloaded item to place it in my KeyChain. This certificate period is from 01-21-2025 to 01-22-2030. QUESTIONS Why does the renewal certificate say "certificate is not trusted"? (Its period is 01-21-2025 to 01-22-2030. Today is 01-27-2025.) How did the renewal certificate get damaged? What must I do to get the damaged certificate replaced with a valid one?

I’m having trouble with the notary step of our electron app. It sometimes says “In progress” for days on end, where other times, it only takes 15-20 minutes. For the last few weeks, I’ve noticed that it will take longer than the 20 minutes if our app was using a not latest version of the electron module -- https://www.npmjs.com/package/electron. I would then update our codebase to build using the latest version, and then try to sign and notarize the app again, and it would work till a new version was released. This was the first time that that process didn’t work. Everything is on latest, and we’re still getting stuck “in progress” for days on end. We have been signing and Notarizing this app for years now, so it's not the first time we're trying to do this process To make matters stranger, I have two branches of the same exact code base – same dependencies, same source code, same everything – there is no difference. One sign and notarize works 100% of the time where the other one hasn’t worked yet. Any ideas would be helpful. I'm not really sure where to begin to debug this. Thanks!

I am trying to resign a package using a script from Docebo. But I got an error when running the script error: The specified item could not be found in the keychain. So I ran security find-identity and I got a 0 Valid identity message. But I can see these certificates installed in my keychain and downloaded a brand new mobile provissioning profile. No dice... any ideas?

Notarization has been stuck for hours in "Current Status: In Progress...." Should I keep on waiting or restart the process. If I need to restart the process, how should I go about and do that?

Hi Apple Developer Community, I'm trying to resolve the following Xcode build error: *"Provisioning profile 'iOS Team Provisioning Profile: ' doesn't include the com.apple.developer.live-activities entitlement." To fix this, I understand I need to add the Live Activity capability to my App ID and ensure it’s included in the provisioning profile. However, when I go to Certificates, Identifiers & Profiles, select my App ID, and click Edit under "App ID Configuration," the Live Activity capability is not available in the list of capabilities. As a result, I can’t proceed with enabling the entitlement or regenerating a correct provisioning profile. I’ve confirmed: My App ID is explicit (not a wildcard). The app’s deployment target is set to iOS 16.1 or later. I’m signed in with the correct Apple Developer Team account. etc. Has anyone experienced this? Is there a prerequisite that I might be missing? Thanks in advance for your help! Best regards, David Winograd Rokfin, Inc.

Dear Apple support, Since the last couple of days, we have some (very) long running notarization requests. Similar requests were done normally under 1 minute. This behavior is unexpected to us, and we did not see it before. The issue occurs for a small CLI tool submitted as a ZIP archive. Checking the documentation, I come across the section about "Avoid long notarization response times and size limits" (https://developer.apple.com/documentation/security/customizing-the-notarization-workflow#Avoid-long-notarization-response-times-and-size-limits). One fact is mentioned “Limit notarizations to 75 per day.” What is behavior if that limitation is reached? Is that limitation per Apple ID or per team ID? Are there some known issues about Notarization Service? Best regards, Stefan

Hello. I have an enterprise application that requires specific privileges to execute correctly on MacOS. One of these privileges is SystemPolicyAllFiles (aka Full Disk Access), as we use the endpoint security framework. When we distribute our application, we generate: A signed, notarized pkg consisting of our application binaries. An MDM-compatible .mobileconfig, which contains the SystemPolicyAllFiles setting. We expect our users to install both to get the application to function correctly. However, we have three environments we deploy to: Internal (local development on a developer's workstation), "development" (where features are integrated prior to release) and "production" (what our customers get). For local, our developers create an Apple account and use a Mac Development certificate for signing. They also generate their own embedded.provisionprofile and drop that into their local installation config. For development/production, we use our Developer ID certificate and Developer Installer certificate, with an endpoint security embedded.provisionprofile bound to those. However, when we generate a .mobileconfig, we need to include a CodeRequirement (CR) for SystemPolicyAllFiles. I've been retrieving this using codesign -dr - ... (i.e., the designated requirement aka DR). However, the designated requirement is very specific to the certificate, which is problematic specifically for local development, where each developer has their own Mac Development certificate. Here's what the relevant section of our generated mobileconfig looks like right now: <dict> <key>SystemPolicyAllFiles</key> <array> <dict> <key>Allowed</key> <true/> <key>CodeRequirement</key> <string>identifier "com.example.app and anchor apple generic and certificate 1[field.1.2.840.113635.100.6.2.6] /* exists */ and certificate leaf[field.1.2.840.113635.100.6.1.13] /* exists */ and certificate leaf[subject.OU] = <TEAMID></string> <key>Comment</key> <string>app</string> <key>Identifier</key> <string>com.exmple.app</string> <key>IdentifierType</key> <string>bundleID</string> <key>StaticCode</key> <false/> </dict> </array> </dict> That's in a format that works for our Developer ID cert, but the DR for the Mac Development certificate looks like: identifier "com.example.app" and anchor apple generic and certificate leaf[subject.CN] = "Mac Developer: John Doe (12ABC34567)" and certificate 1[field.1.2.840.113635.100.6.2.1] /* exists */ Question: Is it possible to relax the code requirement so that it is generic enough to cover all Mac Developer certificates and Developer ID certificates we use? If not, is there a way to have one code requirement for our Mac Developer certificates and a separate CR for our Developer ID certificate? My use case is deploying a static "local" .mobileconfig using our internal company MDM (Apple Business Essentials) to all developer workstations so we don't have to have each developer manually configure their system for the software to run. Thanks! D

In Xcode's (version 16.1) "Devices and Simulators" window pressing the device's context menu item "Show Provisioning Profiles..." does nothing: no new window, no message, nothing. How can I fix this?

I'm trying to get an app notarized, which fails with this error: The signature of the binary is invalid. However, locally checking the signature does succeed: $ codesign -vvv --deep --strict TheApp.app […] TheApp.app: valid on disk TheApp.app: satisfies its Designated Requirement Performing this check on every single item in the app's MacOS folder also succeeds. Context: embedded prebuilt binaries Now, the app has something unusual about it: it embeds prebuilt binaries, arranged in various nested folders. So, the app bundle's MacOS folder actually contains another folder with a whole tree of executables and libraries: Removing these (before building) does fix the notarization issue, but obviously I'd like to keep them in. I did my best to properly sign these items: At build time, they're copied into the product by a Copy Files phase (but not signed), then signed by a script phase That signing uses the same signing identity as the running Xcode build, and enables the hardened runtime The app builds and runs correctly, even as a release build The app has runtime hardening and app sandbox enabled How should I go about diagnosing the notarization issue?

I'm trying to help out one of our vendors by building a skeleton PCI dext which they can flesh out. However, I can't seem to get the signing right. I can't sign it at all using no team or my personal team. "Signing for requires a development team", and "Personal development teams ... do not support the System Extension capability". I can't sign the driver because "DriverKit Team Provisioning Profile: doesn't match the entitlements file's value for the com.apple.developer.driverkit.transport.pci entitlement. I think this problem occurs because our company has already been assigned a transport.pci entitlement, but for our own PCI vendor ID. But I want to build and test software that works with our vendor's PCI device. I tried generating a profile for the driver manually, it contained only our own company's PCI driver match: IOPCIPrimaryMatch = "0x0000MMMM&0x0000FFFF"; where MMMM is our own PCI vendor ID. Is there a better way to inspect the profile Xcode is using than the postage-stamped sized info popup which truncates the information? I would download the generated profile but it doesn't appear on the profile, but Xcode is accessing it from somewhere. When I look at the available capabilities I can add to an app identifier on the Developer portal, I see com.apple.developer.driverkit.transport.usb, which is "development only". There's no "development only" capability for PCI. Does this mean it isn't possible to develop even a proof-of-concept PCI driver without being first granted the DriverKit PCI (Primary Match) entitlement? When adding capabilities to a driver, the list of available capabilities shown in Xcode has one "DriverKit PCI (Primary Match) entry", but if I double click it, two such entries appear in the Signing and Capabilities tab for my driver target. On the Developer portal, when I look at my driver's Identifier, there are two Capabilities labelled DriverKit PCI (Primary Match). Why?

Is the Notary service unavailable again? The system-status page shows it as being green but I am back to receiving the same error as previously which fixed itself once the notary service went green again and I am unable to notarize and staple my Distribution PKG.

I spent 20 minutes trying to figure out why codesigning was failing -- I had the pf block set up correctly, my keychains were unlocked, and then, eventually, it occurred to me, hey, maybe an IP address changed, so I disabled IPv6 except for link local, and then amazingly, it went back to working. I filed FB13706261 over a year ago. This is ridiculous.

I have a .NET 6 application that runs in the background. The installer is a .pkg file built using a third-party tool called "Packages". All .dylib and executable files are codesigned before packaging. The resulting .pkg file is notarized. The app uses these entitlements: com.apple.security.cs.allow-jit com.apple.security.cs.allow-unsigned-executable-memory com.apple.security.cs.allow-dyld-environment-variables com.apple.security.cs.disable-library-validation The app is built on a macbook Air 2015 running macOS 12.6 and it works without issues on that machine. On a macbook Pro M3 running macOS 14.6.1 the app fails to run even though the installation itself is successful. The only logs that I was able to find are related to syspolicyd (4 warnings): Unable to apply protection to app: 45, PST: (vuid: A78FF6C2-08D5-4DCC-B946-8836251AA0E7), (objid: 1873967), (team: (null)), (id: (null)), (bundle_id: (null)) Failed to register app bundle for protection: 45, PST: (vuid: A78FF6C2-08D5-4DCC-B946-8836251AA0E7), (objid: 1873967), (team: (null)), (id: (null)), (bundle_id: (null)) scan failed, finishing evaluation : PST: (vuid: A78FF6C2-08D5-4DCC-B946-8836251AA0E7), (objid: 1873967), (team: (null)), (id: (null)), (bundle_id: (null)) Terminating process due to Gatekeeper rejection: 95158, Unfortunately, verification commands such as sudo codesign --verify --deep --strict -vvv MyApplication.App spctl -a -vvv -t install MyApplicationInstaller.pkg do not indicate any issues. Are there any additional steps that need to be performed in order for my app to work properly on newer machines?

I'm currently befuddled by the entire signing and certificate process. I don't understand what I need, what the team admin needs to do, or how to go about doing it so that I can build the project. We've managed to have this working in the past but I guess the system has changed somewhat. Here's what we have going: A Unity project which hasn't changed from a few years ago. I build the project in unity, open the Xcode project and this: There's an issue with the Signing and Capabilities. If I choose automatic setup it shows an error saying that it requires a development team. I had the account admin add my Apple ID to the team so I'm not sure why that's an issue still. Do I need to pay the 99$ to be able to building Xcode? If I try to do it manually I select the provisioning profile that the account admin sent me and it auto selects the team associated with the provisioning profile I guess but then there's no singing certificate. The error says: There is no signing certificate "iOS Development" found. No "iOS Development" signing certificate matching team ID "V7D5YBZRMV" with a private key was found. So, if someone could explain to me like I'm 5 the entire signing and certificate process is and let me know what we're doing wrong with the team/provisioning profile/certificate setup I would be very much appreciative.

Hello! I've been facing an issue with notarizing a macOS app with an Enterprise API Key. Due to some misunderstanding setting up the project some years ago, the notarization step was using a developer's accounts API Key. I am looking to fix it to have everything centralized in the Enterprise account we work with, but I get "Debug [JWT] Generating new JWT for key ID" with the new key. This is using the xcrun notarytool directly to get more input. Using Fastlane it fails as: Error polling for notarization info: [11:29:25]: unexpected token at '' The project is deployed via MDM, so we need it to prevent the security warning. I used this documentation to create the key: https://developer.apple.com/documentation/enterpriseprogramapi/creating-api-keys-for-enterprise-program-api I have tried a Developer and an Admin access key, and the Account Holder has also created an Admin key but the errors keep the same. I just updated my Fastlane script to use the new key with the updated values. The old developer account key still works. I am not sure if I am missing any steps in the documentation or if this is not achievable. Important to add that all the profiles and certificates were already set up properly in the Enterprise account, the only error was using an App Store Connect Key instead of an Enterprise Key. Thanks in advance for the help.

I started a notarization run a few hours ago. (and used --wait) Conducting pre-submission checks for Metrix Installer.dmg and initiating connection to the Apple notary service... Submission ID received   id: dd77be4c-0cb6-4913-a846-d4025ede37fd Successfully uploaded file   id: dd77be4c-0cb6-4913-a846-d4025ede37fd   path: /Users/johnluss/Work/Metrix Installer.dmg Waiting for processing to complete. Current status: In Progress................................................................................................................................. I finally ctrl-c out of it (PAGES of ....) and tried getting the log Submission log is not yet available or submissionId does not exist   id: dd77be4c-0cb6-4913-a846-d4025ede37fd The Apple System Status page shows all servers up and running. Any suggestions on what might be going wrong?

After I upgraded to macOS 15.3, all of my current Xcode project have the signing issue, I spent half day and I didn't make any progress, I tried two projects, one is Swift AppKit App calling one C++ dylib, another one is a pure Swift AppKit app, when I build, there will be error: Warning: unable to build chain to self-signed root for signer "Apple Development: Steven Tang (XXXXX)" /Volumes/TwoTSSD/steventang/Library/Developer/Xcode/DerivedData/ImageEnhancement-ddbilgyraofrdyfeljyuknusunza/Build/Products/Release/ImageEnhancement.app: errSecInternalComponent I tried remove account, add account back in Xcode, none of it worked, also tried ChatGPT's WWDR updating and it won't help.

Hi, I need to bundle an additional binary along my yet published application. It is a Audio Unit test application. My yet published application implemented Audio Unit plugin support. But upload is always rejected: Validation failed (409) Invalid Provisioning Profile. The provisioning profile included in the bundle com.gsequencer.GSequencer [com.gsequencer.GSequencer.pkg/Payload/com.gsequencer.GSequencer.app] is invalid. [Missing code-signing certificate.] For more information, visit the macOS Developer Portal. (ID: ****) I have followed the instructions here: Embedding a helper tool in a sandboxed app but no luck. Does anyone know whats going on? I use Transporter to upload the application, the embedded.provisioningprofile is copied from Xcode build and code signing is done manually.

I have a mac app which has a launch agent. I signed it with my account, but it always shows as my personal 'XX XXX" in the login items of mac settings. Actually this is the reason I switched my personal account to a company account. But now it is still shown as 'XX XXX' in the login items after I signed up again with this company account. Do you know how I can change this? The identity I also tried to create a new one with the team, but it does not allow me to create a new one. Chatgpt recommends revoking the current one, but this will affect our old release.

I am responsible for the mobile app and thus also of the apple developer and app store connect accounts of a company. An external freelancer developed a software package for us which we aim to offer for installation and use on macOS systems of our customers; distributed exclusively outside of the Apple App Store. The software package has nothing to do with the mobile app. MacOS' Gatekeeper currently warns or even prevents our customers regarding the installation of the package on their device; pretty much as described here: https://developer.apple.com/developer-id/. According to a previous talk with Apple's Support, the software package (.app) the Freelancer developed must be signed with one of our own certificates. As we cannot grant selective app store connect access to third persons (only for the concerned certificates), we prefer to not provide access to our entire apple developer account to the freelancer, for the sole reason of the certificate & signing process. According to previous attempts with Apples' support regarding the most feasible solution in this case, they recommended me to manage the signing of the package of the freelancer, and simply request the package from the freelancer. I've thus generated an according Developer ID Certificate, but regarding the signing process, I'm confused. I know how signing works with mobile apps in XCode, but regarding software that is not distributed throughout the App Store on macOS, I'm unsure about the process. Also, as far as I know, the entitlements of the application are involved in the signing process. So my concern is that simply having the software package (.app) from the freelancer is not really enough to complete the signing + notarization process? Won't I need further information about the app's entitlements etc.? I would like to have a clear solution about the procedure that is required in these cases, as online documentations and / or forums as well as previous talks with your non-technical support from Apple did not resolve the issue.