I have developed an app that I had been testing on the hardware device with the developer profile signed builds, I had setup a CloudKit container in development mode and also had tested with Production mode and they are working as expected. I have also tested storekit auto renewal subscriptions using Storekit Config file and all of that is working on the hardware device with the developer profile signed builds. Now comes the Fun Part, I want to use the Distribution profile to test the app for production readiness, I had created a distribution profile and had set that up in the Release under target of the app in Xcode, I have also created sandbox tester account (which is showing inactive even after 7 days - though I am also logged in with this sandbox tester account on a hardware device and under developer setting it shows as a sandbox tester account) All the subscriptions are showing Ready to Submit in the App Store Connect. I need help understand this whole flow, how to ensure I can test CloudKit and storekit for production readiness and then publish my app for the review. Thank you.

There is a bug in Unity Plugins: Corehaptics.AssetPickerDrawer throws exceptions and draws incorrectly when fieldInfo or assetType is null (FB17305973). I fixed it and created a pull request: https://github.com/apple/unityplugins/pull/47 It has been months and this bug is really annoying.

I'm adding a few custom signposts with mxSignpost(.begin,...) and mxSignpost(.end,...). Is there a way to force delivery of the MXMetricPayload so I don't need to wait for the daily aggregation to be pushed?

Hi, I’m trying to free up space on my computer and have uninstalled Xcode. However, I noticed that many large files remain on the filesystem even after uninstalling it. The largest remaining files (~33 GB) are iOS Simulator images located at: /System/Volumes/Data/Library/Developer/CoreSimulator/Volumes I attempted to delete them using root privileges, but it seems that these system files are mounted as read-only. I’m reaching out to ask for guidance to ensure that these files do not contain anything important for macOS, and that it’s safe to remove them before getting in recovery mode. Thank you very much for your advice!

iphone 15 pro max ios 26 Stuck at the developer mode startup interface and unable to swipe up.

In the availability and pricing section, we have reviewed the plans and we will be upgrading to 50 or 100 million calls/month but before we do, we have a couple questions. Does the API have rate limit or throttling? Do you have additional weather forecast endpoints like hail, radar, or pollen forecast? I see in this thread https://developer.apple.com/forums/thread/795642 that air quality is not available Thanks

The target was chosen as IPhone and IPad. I can also run this build on my IPad. The info.plist content of all our other applications is the same and there were no problems until today. I don't understand why it is being rejected now.

Hey, I am using the terminal a lot. Since I updated to Sonoma (so, really a long time ago). My prompt or more precise the hostname always changes between three states. Sometimes it is username@Macbook-Pro-of-XXX, sometimes username@MacbookPro and sometimes it's username@xxxxxxxx-yyyy-zzzz-aaaa-bbbbbbbbbbbb. The latter is probably my UUID. Does anyone have a clue why this randomly changes?

Hi everyone, I’m hoping someone here can shed some light on what’s going on with Apple’s one-hour security delay when trying to register an iPhone for development use. I’m currently setting up an app build using Expo / EAS and a paid Apple Developer account. Every time I scan the device registration QR code or try to authorise my iPhone as a development device, I get hit with a “security delay — try again in one hour” message. This happens every single time, even if I wait the full hour. The device is the same iPhone I always use, signed in to the same Apple ID, and verified with 2FA. The only thing unusual about my setup is that I’m using Starlink for internet access. Because Starlink uses dynamic IP routing and your exit node changes frequently (depending on which satellite or ground station you’re on), it looks like I’m signing in from a new location each time — sometimes even hundreds of miles apart. It seems that Apple’s security system flags each of these as a “new login” or “new device registration,” then enforces a one-hour safety lockout. That makes it basically impossible to register my device and proceed with iOS builds or testing. Has anyone else run into this problem while using Starlink (or other dynamic-routing connections like VPNs or cellular hotspots)? And if so — is there any known workaround or setting to whitelist a device, stabilise verification, or bypass the repeated one-hour wait? This feels like an over-protective security feature that doesn’t play well with modern satellite internet setups. Any insights from the Apple engineers or other developers would be hugely appreciated. Thanks, Tim Lazenby

Hello, I've encountered unexpected behavior related to version information in our app logs, and I'd like to ask for some advice. We reviewed logs collected from a user running our app (currently available on the App Store). The logs are designed to include both the build number and the app version. Based on the build number in the logs, we believe the installed app version on the user's device is 1.0.3. However, the app version recorded in the logs is 1.1.5, which is the latest version currently available on the App Store. In our project, we set the app version using the MARKETING_VERSION environment variable. This value is configured via XcodeGen, and we define it in a YAML file. Under normal circumstances, the value defined in the YAML file (MARKETING_VERSION = 1.0.3) should be embedded in the app and reflected in the logs. But in this case, the version from the current App Store release (1.1.5) appears instead, which was unexpected. We'd like to know what might cause this behavior, and if there are any known factors that could lead to this. Also, is it possible that MARKETING_VERSION might somehow dynamically reflect the version currently available on the App Store? YAML: info.plist:

This posts collects together a bunch of information about the symbols found in a Mach-O file. It assumes the terminology defined in An Apple Library Primer. If you’re unfamiliar with a term used here, look there for the definition. If you have any questions or comments about this, start a new thread in the Developer Tools & Services > General topic area and tag it with Linker. Share and Enjoy — Quinn “The Eskimo!” @ Developer Technical Support @ Apple let myEmail = "eskimo" + "1" + "@" + "apple.com" Understanding Mach-O Symbols Every Mach-O file has a symbol table. This symbol table has many different uses: During development, it’s written by the compiler. And both read and written by the linker. And various other tools. During execution, it’s read by the dynamic linker. And also by various APIs, most notably dlsym. The symbol table is an array of entries. The format of each entry is very simple, but they have been used and combined in various creative ways to achieve a wide range of goals. For example: In a Mach-O object file, there’s an entry for each symbol exported to the linker. In a Mach-O image, there’s an entry for each symbol exported to the dynamic linker. And an entry for each symbol imported from dynamic libraries. Some entries hold information used by the debugger. See Debug Symbols, below. Examining the Symbol Table There are numerous tools to view and manipulate the symbol table, including nm, dyld_info, symbols, strip, and nmedit. Each of these has its own man page. A good place to start is nm: % nm Products/Debug/TestSymTab U ___stdoutp 0000000100000000 T __mh_execute_header U _fprintf U _getpid 0000000100003f44 T _main 0000000100008000 d _tDefault 0000000100003ecc T _test 0000000100003f04 t _testHelper Note In the examples in this post, TestSymTab is a Mach-O executable that’s formed by linking two Mach-O object files, main.o and TestCore.o. There are three columns here, and the second is the most important. It’s a single letter indicating the type of the entry. For example, T is a code symbol (in Unix parlance, code is in the text segment), D is a data symbol, and so on. An uppercase letter indicates that the symbol is visible to the linker; a lowercase letter indicates that it’s internal. An undefined (U) symbol has two potential meanings: In a Mach-O image, the symbol is typically imported from a specific dynamic library. The dynamic linker connects this import to the corresponding exported symbol of the dynamic library at load time. In a Mach-O object file, the symbol is undefined. In most cases the linker will try to resolve this symbol at link time. Note The above is a bit vague because there are numerous edge cases in how the system handles undefined symbols. For more on this, see Undefined Symbols, below. The first column in the nm output is the address associated with the entry, or blank if an address is not relevant for this type of entry. For a Mach-O image, this address is based on the load address, so the actual address at runtime is offset by the slide. See An Apple Library Primer for more about those concepts. The third column is the name for this entry. These names have a leading underscore because that’s the standard name mangling for C. See An Apple Library Primer for more about name mangling. The nm tool has a lot of formatting options. The ones I use the most are: -m — This prints more information about each symbol table entry. For example, if a symbol is imported from a dynamic library, this prints the library name. For a concrete example, see A Deeper Examination below. -a — This prints all the entries, including debug symbols. We’ll come back to that in the Debug Symbols section, below. -p — By default nm sorts entries by their address. This disables that sort, causing nm to print the entries in the order in which they occur in the symbol table. -x — This outputs entries in a raw format, which is great when you’re trying to understand what’s really going on. See Raw Symbol Information, below, for an example of this. A Deeper Examination To get more information about each symbol table, run nm with the -m option: % nm -m Products/Debug/TestSymTab (undefined) external ___stdoutp (from libSystem) 0000000100000000 (__TEXT,__text) [referenced dynamically] external __mh_execute_header (undefined) external _fprintf (from libSystem) (undefined) external _getpid (from libSystem) 0000000100003f44 (__TEXT,__text) external _main 0000000100008000 (__DATA,__data) non-external _tDefault 0000000100003ecc (__TEXT,__text) external _test 0000000100003f04 (__TEXT,__text) non-external _testHelper This contains a world of extra information about each entry. For example: You no longer have to remember cryptic single letter codes. Instead of U, you get undefined. If the symbol is imported from a dynamic library, it gives the name of that dynamic library. Here we see that _fprintf is imported from the libSystem library. It surfaces additional, more obscure information. For example, the referenced dynamically flag is a flag used by the linker to indicate that a symbol is… well… referenced dynamically, and thus shouldn’t be dead stripped. Undefined Symbols Mach-O’s handling of undefined symbols is quite complex. To start, you need to draw a distinction between the linker (aka the static linker) and the dynamic linker. Undefined Symbols at Link Time The linker takes a set of files as its input and produces a single file as its output. The input files can be Mach-O images or dynamic libraries [1]. The output file is typically a Mach-O image [2]. The goal of the linker is to merge the object files, resolving any undefined symbols used by those object files, and create the Mach-O image. There are two standard ways to resolve an undefined symbol: To a symbol exported by another Mach-O object file To a symbol exported by a dynamic library In the first case, the undefined symbol disappears in a puff of linker magic. In the second case, it records that the generated Mach-O image depends on that dynamic library [3] and adds a symbol table entry for that specific symbol. That entry is also shown as undefined, but it now indicates the library that the symbol is being imported from. This is the core of the two-level namespace. A Mach-O image that imports a symbol records both the symbol name and the library that exports the symbol. The above describes the standard ways used by the linker to resolve symbols. However, there are many subtleties here. The most radical is the flat namespace. That’s out of scope for this post, because it’s a really bad option for the vast majority of products. However, if you’re curious, the ld man page has some info about how symbol resolution works in that case. A more interesting case is the -undefined dynamic_lookup option. This represents a halfway house between the two-level namespace and the flat namespace. When you link a Mach-O image with this option, the linker resolves any undefined symbols by adding a dynamic lookup undefined entry to the symbol table. At load time, the dynamic linker attempts to resolve that symbol by searching all loaded images. This is useful if your software works on other Unix-y platforms, where a flat namespace is the norm. It can simplify your build system without going all the way to the flat namespace. Of course, if you use this facility and there are multiple libraries that export that symbol, you might be in for a surprise! [1] These days it’s more common for the build system to pass a stub library (.tbd) to the linker. The effect is much the same as passing in a dynamic library. In this discussion I’m sticking with the old mechanism, so just assume that I mean dynamic library or stub library. If you’re unfamiliar with the concept of a stub library, see An Apple Library Primer. [2] The linker can also merge the object files together into a single object file, but that’s relatively uncommon operation. For more on that, see the discussion of the -r option in the ld man page. [3] It adds an LC_LOAD_DYLIB load command with the install name from the dynamic library. See Dynamic Library Identification for more on that. Undefined Symbols at Load Time When you load a Mach-O image the dynamic linker is responsible for finding all the libraries it depends on, loading them, and connecting your imports to their exports. In the typical case the undefined entry in your symbol table records the symbol name and the library that exports the symbol. This allows the dynamic linker to quickly and unambiguously find the correct symbol. However, if the entry is marked as dynamic lookup [1], the dynamic linker will search all loaded images for the symbol and connect your library to the first one it finds. If the dynamic linker is unable to find a symbol, its default behaviour is to fail the load of the Mach-O image. This changes if the symbol is a weak reference. In that case, the dynamic linking continues to load the image but sets the address of the symbol to NULL. See Weak vs Weak vs Weak, below, for more about this. [1] In this case nm shows the library name as dynamically looked up. Weak vs Weak vs Weak Mach-O supports two different types of weak symbols: Weak references (aka weak imports) Weak definitions IMPORTANT If you use the term weak without qualification, the meaning depends on your audience. App developers tend to assume that you mean a weak reference whereas folks with a C++ background tend to assume that you mean a weak definition. It’s best to be specific. Weak References Weak references support the availability mechanism on Apple platforms. Most developers build their apps with the latest SDK and specify a deployment target, that is, the oldest OS version on which their app runs. Within the SDK, each declaration is annotated with the OS version that introduced that symbol [1]. If the app uses a symbol introduced later than its deployment target, the compiler flags that import as a weak reference. The app is then responsible for not using the symbol if it’s run on an OS release where it’s not available. For example, consider this snippet: #include <xpc/xpc.h> void testWeakReference(void) { printf("%p\n", xpc_listener_set_peer_code_signing_requirement); } The xpc_listener_set_peer_code_signing_requirement function is declared like so: API_AVAILABLE(macos(14.4)) … int xpc_listener_set_peer_code_signing_requirement(…); The API_AVAILABLE macro indicates that the symbol was introduced in macOS 14.4. If you build this code with the deployment target set to macOS 13, the symbol is marked as a weak reference: % nm -m Products/Debug/TestWeakRefC … (undefined) weak external _xpc_listener_set_peer_code_signing_requirement (from libSystem) If you run the above program on macOS 13, it’ll print NULL (actually 0x0). Without support for weak references, the dynamic linker on macOS 13 would fail to load the program because the _xpc_listener_set_peer_code_signing_requirement symbol is unavailable. [1] In practice most of the SDK’s declarations don’t have availability annotations because they were introduced before the minimum deployment target supported by that SDK. Weak definitions Weak references are about imports. Weak definitions are about exports. A weak definition allows you to export a symbol from multiple images. The dynamic linker coalesces these symbol definitions. Specifically: The first time it loads a library with a given weak definition, the dynamic linker makes it the primary. It registers that definition such that all references to the symbol resolve to it. This registration occurs in a namespace dedicated to weak definitions. That namespace is flat. Any subsequent definitions of that symbol are ignored. Weak definitions are weird, but they’re necessary to support C++’s One Definition Rule in a dynamically linked environment. IMPORTANT Weak definitions are not just weird, but also inefficient. Avoid them where you can. To flush out any unexpected weak definitions, pass the -warn_weak_exports option to the static linker. The easiest way to create a weak definition is with the weak attribute: __attribute__((weak)) void testWeakDefinition(void) { } IMPORTANT The C++ compiler can generate weak definitions without weak ever appearing in your code. This shows up in nm like so: % nm -m Products/Debug/TestWeakDefC … 0000000100003f40 (__TEXT,__text) weak external _testWeakDefinition … The output is quite subtle. A symbol flagged as weak external is either a weak reference or a weak definition depending on whether it’s undefined or not. For clarity, use dyld_info instead: % dyld_info -imports -exports Products/Debug/TestWeakRefC Products/Debug/TestWeakDefC [arm64]: … -imports: … 0x0001 _xpc_listener_set_peer_code_signing_requirement [weak-import] (from libSystem) % dyld_info -imports -exports Products/Debug/TestWeakDefC Products/Debug/TestWeakDefC [arm64]: -exports: offset symbol … 0x00003F40 _testWeakDefinition [weak-def] … … Here, weak-import indicates a weak reference and weak-def a weak definition. Weak Library There’s one final confusing use of the term weak, that is, weak libraries. A Mach-O image includes a list of imported libraries and a list of symbols along with the libraries they’re imported from. If an image references a library that’s not present, the dynamic linker will fail to load the library even if all the symbols it references in that library are weak references. To get around this you need to mark the library itself as weak. If you’re using Xcode it will often do this for your automatically. If it doesn’t, mark the library as optional in the Link Binary with Libraries build phase. Use otool to see whether a library is required or optional. For example, this shows an optional library: % otool -L Products/Debug/TestWeakRefC Products/Debug/TestWeakRefC: /usr/lib/libEndpointSecurity.dylib (… 511.60.5, weak) … In the non-optional case, there’s no weak indicator: % otool -L Products/Debug/TestWeakRefC Products/Debug/TestWeakRefC: /usr/lib/libEndpointSecurity.dylib (… 511.60.5) … Debug Symbols or Why the DWARF still stabs. (-: Historically, all debug information was stored in symbol table entries, using a format knows as stabs. This format is now obsolete, having been largely replaced by DWARF. However, stabs symbols are still used for some specific roles. Note See <mach-o/stab.h> and the stab man page for more about stabs on Apple platforms. See stabs and DWARF for general information about these formats. In DWARF, debug symbols aren’t stored in the symbol table. Rather, debug information is stored in various __DWARF sections. For example: % otool -l Intermediates.noindex/TestSymTab.build/Debug/TestSymTab.build/Objects-normal/arm64/TestCore.o | grep __DWARF -B 1 sectname __debug_abbrev segname __DWARF … The compiler inserts this debug information into the Mach-O object file that it creates. Eventually this Mach-O object file is linked into a Mach-O image. At that point one of two things happens, depending on the Debug Information Format build setting. During day-to-day development, set Debug Information Format to DWARF. When the linker creates a Mach-O image from a bunch of Mach-O object files, it doesn’t do anything with the DWARF information in those objects. Rather, it records references to the source objects files into the final image. This is super quick. When you debug that Mach-O image, the debugger finds those references and uses them to locate the DWARF information in the original Mach-O object files. Each reference is stored in a stabs OSO symbol table entry. To see them, run nm with the -a option: % nm -a Products/Debug/TestSymTab … 0000000000000000 - 00 0001 OSO …/Intermediates.noindex/TestSymTab.build/Debug/TestSymTab.build/Objects-normal/arm64/TestCore.o 0000000000000000 - 00 0001 OSO …/Intermediates.noindex/TestSymTab.build/Debug/TestSymTab.build/Objects-normal/arm64/main.o … Given the above, the debugger knows to look for DWARF information in TestCore.o and main.o. And notably, the executable does not contain any DWARF sections: % otool -l Products/Debug/TestSymTab | grep __DWARF -B 1 % When you build your app for distribution, set Debug Information Format to DWARF with dSYM File. The executable now contains no DWARF information: % otool -l Products/Release/TestSymTab | grep __DWARF -B 1 % Xcode runs dsymutil tool to collect the DWARF information, organise it, and export a .dSYM file. This is actually a document package, within which is a Mach-O dSYM companion file: % find Products/Release/TestSymTab.dSYM Products/Release/TestSymTab.dSYM Products/Release/TestSymTab.dSYM/Contents … Products/Release/TestSymTab.dSYM/Contents/Resources/DWARF Products/Release/TestSymTab.dSYM/Contents/Resources/DWARF/TestSymTab … % file Products/Release/TestSymTab.dSYM/Contents/Resources/DWARF/TestSymTab Products/Release/TestSymTab.dSYM/Contents/Resources/DWARF/TestSymTab: Mach-O 64-bit dSYM companion file arm64 That file contains a copy of the the DWARF information from all the original Mach-O object files, optimised for use by the debugger: % otool -l Products/Release/TestSymTab.dSYM/Contents/Resources/DWARF/TestSymTab | grep __DWARF -B 1 … sectname __debug_line segname __DWARF … Raw Symbol Information As described above, each Mach-O file has a symbol table that’s an array of symbol table entries. The structure of each entry is defined by the declarations in <mach-o/nlist.h> [1]. While there is an nlist man page, the best documentation for this format is the the comments in the header itself. Note The terms nlist stands for name list and dates back to truly ancient versions of Unix. Each entry is represented by an nlist_64 structure (nlist for 32-bit Mach-O files) with five fields: n_strx ‘points’ to the string for this entry. n_type encodes the entry type. This is actually split up into four subfields, as discussed below. n_sect is the section number for this entry. n_desc is additional information. n_value is the address of the symbol. The four fields within n_type are N_STAB (3 bits), N_PEXT (1 bit), N_TYPE (3 bits), and N_EXT (1 bit). To see these raw values, run nm with the -x option: % nm -a -x Products/Debug/TestSymTab … 0000000000000000 01 00 0300 00000036 _getpid 0000000100003f44 24 01 0000 00000016 _main 0000000100003f44 0f 01 0000 00000016 _main … This prints a column for n_value, n_type, n_sect, n_desc, and n_strx. The last column is the string you get when you follow the ‘pointer’ in n_strx. The mechanism used to encode all the necessary info into these fields is both complex and arcane. For the details, see the comments in <mach-o/nlist.h> and <mach-o/stab.h>. However, just to give you a taste: The entry for getpid has an n_type field with just the N_EXT flag set, indicating that this is an external symbol. The n_sect field is 0, indicating a text symbol. And n_desc is 0x0300, with the top byte indicating that the symbol is imported from the third dynamic library. The first entry for _main has an n_type field set to N_FUN, indicating a stabs function symbol. The n_desc field is the line number, that is, line 22. The second entry for _main has an n_type field with N_TYPE set to N_SECT and the N_EXT flag set, indicating a symbol exported from a section. In this case the section number is 1, that is, the text section. [1] There is also an <nlist.h> header that defines an API that returns the symbol table. The difference between <nlist.h> and <mach-o/nlist.h> is that the former defines an API whereas the latter defines the Mach-O on-disk format. Don’t include both; that won’t end well!

Hi, is there a compiled version of MailCore.swift? I want to build an easy-to-use mail app for my mother, who is 97, has a MacBook Air, but Apple Mail is too complicated for her. chatGPT said I am too stupid to compile it by myself. Regards Stephan

在将游戏从 Nintendo Switch 移植到 Mac 的过程中使用 .NET （NativeAOT） 有哪些限制和注意事项（尽管两者都是 ARM）？

I have developed a Swift macro called @CodableInit in the SwiftCodableMacro module, and I’m able to use it successfully in my main project. Here’s an example usage: import SwiftCodableMacro @CodableInit // This is for Codable macros public class ErrorMonitoringWebPlugin { public var identifier: UUID = UUID() // MARK: - Codable required public init(from decoder:Decoder) throws { let values = try decoder.container(keyedBy: CodingKeys.self) identifier = try values.decode(UUID.self, forKey: .identifier) } } However, when I try to write a unit test for the ErrorMonitoringWebPlugin class, I encounter an issue. Here's the test case: func testCodableSubjectIdentifierShouldEqualDecodedSubjectIdentifier() { self.measure { let encoder = JSONEncoder() let data = try? encoder.encode(subject) //Here I am getting this error Class 'JSONEncoder' requires that 'ErrorMonitoringWebPlugin' conform to 'Encodable' let decoder = JSONDecoder() let decodedSubject = try? decoder.decode(ErrorMonitoringWebPlugin.self, from: data!) XCTAssertEqual(subject.identifier, decodedSubject?.identifier) } } The compiler throws an error saying: Class 'JSONEncoder' requires that 'ErrorMonitoringWebPlugin' conform to 'Encodable' Even though the @CodableInit macro is supposed to generate conformance, it seems that this macro-generated code is not visible or active inside the test target. How can I ensure that the @CodableInit macro (from SwiftCodableMacro) is correctly applied and recognized within the XCTest target of my main project?

I’m using Developer iOS app to watch WWDC session videos. i notice it doesn’t record a video as watched after I watched it and even manual marking it using Mark as Watch has no effect. I remember the issue started several years ago because some old WWDC videos were marked watches.

I am a solo developer building a cross-platform voice assistant app using Capacitor (with HTML, JS) and Xcode for the iOS version. The app is called "Echo Eyes," and it already functions well as a Progressive Web App (PWA). However, the iOS build has been completely blocked due to persistent sandbox permission errors from macOS during the CocoaPods framework embedding phase. This issue has caused severe disruption to my project and personal well-being, and I am writing to formally request assistance in identifying a clear solution. I am not a beginner and have followed all known best practices, forums, and Apple guidance without success. What I’ve Built So Far: Fully working PWA version of the app (voice input, HTML/JS interface) Capacitor initialized with ID: com.echo.eyes.voice Capacitor iOS platform added with CocoaPods App runs fine until Xcode reaches: [CP] Embed Pods Frameworks The Exact Problem: Sandbox: bash(12319) deny(1) file-read-data /Users/Shared/projects/Echo_Mobile/ios/App/Pods/Target Support Files/Pods-App/Pods-App-frameworks.sh Command PhaseScriptExecution failed with a nonzero exit code Clarification: This is not an HTML/JS issue. The failure occurs in Xcode long before web assets are embedded into the bundle. The shell script /Pods-App-frameworks.sh cannot be read due to macOS sandbox restrictions. Everything I’ve Tried: Gave Xcode and Terminal Full Disk Access Ran: sudo xattr -rd com.apple.quarantine on the entire Pods directory Added /bin/bash and /bin/sh to Full Disk Access (after confirming the exact shell via $SHELL) Attempted to disable Gatekeeper via Terminal: sudo spctl --master-disable (confirmed not effective without GUI toggle) Tried relocating project to /Users/Shared/projects/ Cleaned build folder, removed derived data, reinstalled pods Debugged shell usage with: echo "▶️ Embedding under shell: $SHELL" in the [CP] Embed Pods Frameworks script Attempted to grant shell access to Documents Folder, Desktop, and more via Files &amp; Folders Current State: Despite following all known and recommended steps, Xcode continues to return the same sandbox error. The shell script that embeds the CocoaPod frameworks is denied permission to read its own contents by macOS. What I Am Asking For: Is this a known issue in current versions of macOS or Xcode regarding sandbox denial for shell execution inside Pods? Is there a recommended method to grant /bin/bash or /bin/sh permission to read and run these scripts under Xcode without compromising system security? Is moving the project outside /Users (e.g. to /Projects) the only real workaround? Are there official Apple workarounds or entitlements available for developers encountering this? Personal Note: This issue has caused significant emotional and physical distress. I’m building this app as a personal healing tool and companion. I’ve poured months of work into this and done everything I can to follow Apple’s development guidelines. I’m not asking for hand-holding — only a clear, respectful response confirming whether this is expected behavior and what can be done to resolve it. Thank you for your time and understanding.

In our Unity App for iOS build, when we opened the PDF from the app, it is automatically opening in landspace mode instead of portrait. In the android and windows apps, we are able to open in the portrait mode. We tried to make the changes in the project settings but it did not change. Any way in which we can acheive this would be helpful for us.

On iOS 18, when XCUITest encounters an "Application has not loaded accessibility" error after the 60 second timeout, it performs an undocumented auto-recovery ("Setting up automation session") instead of halting the test as documented. This leaves the XCUITest framework in a corrupted state, causing subsequent tests in the same session to fail with unexpected behavior. Expected Behavior (per Apple documentation): Any failure in the launch sequence will be reported as a test failure and the test will be halted at that point. Actual Behavior: XCUITest waits 60 seconds for accessibility to load Logs "Application has not loaded accessibility" error Instead of halting, performs "Setting up automation session" (auto-recovery) Test continues with corrupted framework state Subsequent tests in the same session fail with phantom element queries Steps Run XCUITest suite on a real iOS 18 device Have an app with moderately heavy initialization (e.g., synchronous network operations during bootstrap) Observe intermittent "accessibility not loaded" errors When error occurs, subsequent tests fail with unexpected behavior Test Logs Evidence First test (accessibility failure + recovery): t = 11.11s Wait for accessibility to load t = 71.14s Capturing diagnostic spindump t = 76.24s Assertion Failure: Application 'com.example.app' has not loaded accessibility t = 76.26s Setting up automation session ← Undocumented recovery t = 77.29s Tear Down Second test (corrupted state): t = 35.01s Tap "signin-button" t = 35.55s Waiting for "bannerButtonStackFirstItem" ← Query NOT in test code! t = 40.58s Assertion Failure: Failed to find element The second test executes element queries that do not exist in its source code, indicating leaked/corrupted state from the previous test's failed recovery. Note: The tearDown() method terminates the app but cannot reset the internal state of the XCUITest framework itself, so corruption persists across tests. We are observing this behavior consistently on iOS 18 real devices. We would like to know: Is this a known issue with XCUITest on iOS 18? Is anyone experiencing similar "accessibility not loaded" failures followed by auto-recovery? Is the "Setting up automation session" recovery behavior intentional or a bug? Is there a recommended workaround to prevent framework state corruption between tests?

Hi, I’m having trouble installing GPT 1.1 on macOS Sequoia 15.3.1 using Xcode Command Line Tools 16.0. I downloaded Evaluation Environment for Windows Games 2.1, mounted the image, and opened the README file. Then, I followed Option 2 to build the environment from scratch: Set up your development and Homebrew environment Ensure you are using Command Line Tools for Xcode 15.1. You can download this older version from: https://developer.apple.com/downloads Note: There is a header file layout change that prevents using newer versions of the macOS SDK. softwareupdate --install-rosetta arch -x86_64 zsh /bin/bash -c "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/HEAD/install.sh)" which brew brew tap apple/apple http://github.com/apple/homebrew-apple brew -v install apple/apple/game-porting-toolkit At first, I noticed that I needed to use CLT 15.1, which is not supported on later macOS versions (including mine). Even when I tried using 15.3 (which is somehow supported), I received a message stating that I needed CLT v16.0 or higher to install GPT. After following all the steps and waiting for the installation to complete, I got the following error: ==> Installing apple/apple/game-porting-toolkit ==> Staging /Users/tycjanfalana/Library/Caches/Homebrew/downloads/7baed2a6fd34b4a641db7d1ea1e380ccb2f457bb24cd8043c428b6c10ea22932--crossover-sources-22.1.1.tar.gz in /private/tmp/game-porting-toolkit-20250316-15122-yxo3un ==> Patching ==> /private/tmp/game-porting-toolkit-20250316-15122-yxo3un/wine/configure --prefix=/usr/local/Cellar/game-porting-toolkit/1.1 --disable-win16 --disable-tests --without-x --without-pulse --without-dbus --without-inotify --without-alsa --without-capi --without-oss --without-udev --without-krb5 --enable-win64 --with-gnutls --with-freetype --with-gstreamer CC=/usr/local/opt/game-porting-toolkit-compiler/bin/clang CXX=/usr/local/opt/game-porting-toolkit-compiler/bin/clang++ checking build system type... x86_64-apple-darwin24.3.0 checking host system type... x86_64-apple-darwin24.3.0 checking whether make sets $(MAKE)... yes checking for gcc... /usr/local/opt/game-porting-toolkit-compiler/bin/clang checking whether the C compiler works... no configure: error: in `/private/tmp/game-porting-toolkit-20250316-15122-yxo3un/wine64-build': configure: error: C compiler cannot create executables See `config.log' for more details ==> Formula Tap: apple/apple Path: /usr/local/Homebrew/Library/Taps/apple/homebrew-apple/Formula/game-porting-toolkit.rb ==> Configuration HOMEBREW_VERSION: 4.4.24 ORIGIN: https://github.com/Homebrew/brew HOMEBREW_PREFIX: /usr/local Homebrew Ruby: 3.3.7 => /usr/local/Homebrew/Library/Homebrew/vendor/portable-ruby/3.3.7/bin/ruby CPU: 14-core 64-bit westmere Clang: 16.0.0 build 1600 Git: 2.39.5 => /Library/Developer/CommandLineTools/usr/bin/git Curl: 8.7.1 => /usr/bin/curl macOS: 15.3.1-x86_64 CLT: 16.0.0.0.1.1724870825 Xcode: N/A Rosetta 2: true ==> ENV HOMEBREW_CC: clang HOMEBREW_CXX: clang++ CFLAGS: [..] Error: apple/apple/game-porting-toolkit 1.1 did not build Logs: /Users/xyz/Library/Logs/Homebrew/game-porting-toolkit/00.options.out /Users/xyz/Library/Logs/Homebrew/game-porting-toolkit/01.configure /Users/xyz/Library/Logs/Homebrew/game-porting-toolkit/01.configure.cc /Users/xyz/Library/Logs/Homebrew/game-porting-toolkit/wine64-build If reporting this issue, please do so to (not Homebrew/brew or Homebrew/homebrew-core): apple/apple In config.log, I found this: configure:4672: checking for gcc configure:4704: result: /usr/local/opt/game-porting-toolkit-compiler/bin/clang configure:5057: checking for C compiler version configure:5066: /usr/local/opt/game-porting-toolkit-compiler/bin/clang --version >&5 clang version 8.0.0 Target: x86_64-apple-darwin24.3.0 Thread model: posix InstalledDir: /usr/local/opt/game-porting-toolkit-compiler/bin configure:5077: $? = 0 configure:5066: /usr/local/opt/game-porting-toolkit-compiler/bin/clang -v >&5 clang version 8.0.0 Target: x86_64-apple-darwin24.3.0 Thread model: posix InstalledDir: /usr/local/opt/game-porting-toolkit-compiler/bin configure:5077: $? = 0 configure:5066: /usr/local/opt/game-porting-toolkit-compiler/bin/clang -V >&5 clang-8: error: argument to '-V' is missing (expected 1 value) clang-8: error: no input files configure:5077: $? = 1 configure:5066: /usr/local/opt/game-porting-toolkit-compiler/bin/clang -qversion >&5 clang-8: error: unknown argument '-qversion', did you mean '--version'? clang-8: error: no input files configure:5077: $? = 1 configure:5066: /usr/local/opt/game-porting-toolkit-compiler/bin/clang -version >&5 clang-8: error: unknown argument '-version', did you mean '--version'? clang-8: error: no input files configure:5077: $? = 1 configure:5097: checking whether the C compiler works configure:5119: /usr/local/opt/game-porting-toolkit-compiler/bin/clang [...] dyld[15547]: Symbol not found: _lto_codegen_debug_options_array Referenced from: <E33DCAC4-3116-3019-8003-432FB3E66FB4> /Library/Developer/CommandLineTools/usr/bin/ld Expected in: <43F5C676-DE37-3F0E-93E1-BF793091141E> /usr/local/Cellar/game-porting-toolkit-compiler/0.1/lib/libLTO.dylib clang-8: error: unable to execute command: Abort trap: 6 clang-8: error: linker command failed due to signal (use -v to see invocation) configure:5123: $? = 254 configure:5163: result: no configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "Wine" | #define PACKAGE_TARNAME "wine" | #define PACKAGE_VERSION "7.7" | #define PACKAGE_STRING "Wine 7.7" | #define PACKAGE_BUGREPORT "" | #define PACKAGE_URL "" | /* end confdefs.h. */ | | int | main (void) | { | | ; | return 0; | } configure:5168: error: in `/private/tmp/game-porting-toolkit-20250316-15122-yxo3un/wine64-build': configure:5170: error: C compiler cannot create executables See `config.log` for more details Does anyone have any ideas on how to fix this?

I am developing an Augmented Reality (AR) navigation application for the iPad, utilizing the ARCL library to place Points of Interest (POIs) in the real world. The application's behavior varies significantly based on the device's networking configuration: Cellular Network (Expected Behavior): On an iPad with a cellular modem, when using the cellular network, all POIs are placed accurately with correct orientation. Wi-Fi Only (Expected Behavior): On a Wi-Fi-only model (no GPS chip), POI placement is inaccurate, confirming the need for an external GPS receiver for that hardware configuration. Cellular + Wi-Fi (Anomalous Behavior): The iPad is a cellular model (equipped with GNSS/GPS). The device is connected to a Wi-Fi network (enforced via an MDM profile, preventing the user from disabling Wi-Fi). When actively connected to this specific Wi-Fi network, the AR POIs consistently display with an incorrect orientation and placement, even though the device hardware has a dedicated GPS chip. The placement error strongly suggests that the device's determined location or heading is erroneous. It appears that the active Wi-Fi connection is somehow interfering with or overriding the high-accuracy GNSS/GPS data, leading to a flawed Core Location determination that negatively impacts the ARCL world tracking and anchor placement. Has anyone experienced a scenario where an active Wi-Fi connection on a cellular iPad model causes Core Location to prioritize less accurate location data (potentially Wi-Fi-based location services) over the device's built-in GNSS/GPS, resulting in severe orientation errors? We observed that on Apple map(native application) as well it is showing wrong location and orientation when it is connected to WiFi