iPhone 12 pro with iOS 26.0 (23A5276f) App: https://developer.apple.com/documentation/wifiaware/building-peer-to-peer-apps We aim to use Wi-Fi Aware to establish file transfer between Android and Apple devices. Apple will act as the Publisher, and Android will act as the Subscriber. According to the pairing process outlined in the Wi-Fi Aware protocol (Figure 49 in the Wi-Fi Aware 4.0 specification), the three PASN Authentication frames have been successfully exchanged. Subsequently, Android sends the encrypted Follow-up PMF to Apple, but the Apple log shows: Failed to parse event. Please refer to the attached complete log. We request Apple to provide a solution. apple Log-20250808a.txt

Hi Have uploaded the build version and status now is approved, but this build is not showing under testflight previous builds, not able to install this version. Also when adding independent tester, error occured showing like bolow, retry not work. Anyone facing this problem ?

Dear Apple： I find a problem on Airpods Pro2（USB-C type）. 1、When an iPhone Xs Max running iOS 18.1 is connected to AirPods Pro 2 (Lightning connector version), the headphone settings page displays four noise cancellation modes: Off, Transparency, Adaptive, and Noise Cancellation. 2、When an iPhone 14 running iOS 26.2 is connected to AirPods Pro 2 (Lightning connector version), the headphone settings page displays three noise cancellation modes: Transparency, Adaptive, and Noise Cancellation How many modes is on Airpods Pro2？

When using the NEHotspotConfigurationManager applyConfiguration interface for network connection.Sometimes there is a pop-up prompt when the connection fails, and sometimes there is no pop-up prompt. Why is there no pop-up prompt when the connection fails

Title： iPhone 17 Wi-Fi connection via NEBOTspotConfigurationManager::applyConfiguration is significantly slower compared to other models Description： When using the NEBOTspotConfigurationManager::applyConfiguration API to connect to a Wi-Fi network, the connection process on iPhone 17 is extremely slow compared to other iPhone models. For example, in one test case: The API call to connect to Wi-Fi (LRA-AN00%6149%HonorConnect) was initiated at 16:16:29. However, the Association Request was not actually initiated until 16:16:58. During this ~29-second delay, the device appears to be scanning before starting the association process. This issue is specific to iPhone 17 — the same code and network environment do not exhibit this delay on other iPhone models. Steps to Reproduce: On an iPhone 17, call NEBOTspotConfigurationManager::applyConfiguration to connect to a known Wi-Fi network. Observe the timestamps between API invocation and the start of the Association Request. Compare with the same process on other iPhone models. Expected Result: The Association Request should start almost immediately after the API call, similar to other iPhone models. Actual Result: On iPhone 17, there is a ~29-second delay between API call and Association Request initiation, during which the device appears to be scanning. Impact: This delay affects user experience and connection performance when using programmatic Wi-Fi configuration on iPhone 17. Environment: Device: iPhone 17 iOS Version:26.0.1 API: NEBOTspotConfigurationManager::applyConfiguration Network: WPA2-Personal IOS.txt

This is a major issue. After my iPhone 12 Pro was upgraded to iOS 26 beta 6, Apple's official Wi-Fi Aware Sample APP crashed immediately and couldn't be opened. It just force closes. Has any developer encountered this problem?

Environment: iOS Version: 26.0 Device Model: iPhone 12 Pro Max Peripheral: [Fill in peripheral name/model/firmware version] Steps to Reproduce: Connect to the peripheral using CoreBluetooth. Discover services via discoverServices. Discover characteristics via discoverCharacteristics. Call setNotifyValue:YES for a characteristic that supports notifications (Notify or Indicate). Capture the HCI log during the above process. Expected Result: After calling setNotifyValue:YES, CoreBluetooth should write the appropriate value to the Client Characteristic Configuration descriptor (UUID: 0xFCF8) to enable notifications, and subsequent notifications should be received from the peripheral. Actual Result: After calling setNotifyValue:YES, no subscription action is triggered. HCI logs show that the subscription write to the CCC descriptor (0xFCF8) is missing. The target service and characteristic values have already been discovered prior to calling setNotifyValue:YES. Additional Information: HCI log screenshot attached below highlights the moment after setNotifyValue:YES was invoked, showing no GATT Write Request to the CCC descriptor. Full HCI log file is also attached for reference. 11:29:38:165: Call setNotifyValue: YES

Please ask Apple to provide an interface for sending follow-ups like Samsung's WiFi Aware.

Hello, dear Apple engineers. We have recently tried to pair our Android phones and iPhones via BLE SMP, but have encountered a very high probability of pairing failures. Through PacketLogger and Android phone HCI, we have determined that the issue is caused by the iOS side sending an SMP Pairing Failed message during the SMP process. Please help us analyze the reason for this.

After Apple-to-Apple pairing is completed, the paired device will be recorded in “Settings → Privacy & Security → Paired Devices”. However, after Android-to-Apple pairing is completed, the device is not saved to this list. Android device can be normally displayed on the Apple official Wi-Fi Aware Sample. However, the indicator is not green. During pairing, the Apple log shows: state: authenticated, and the Android side triggers the callback onPairingSetupSucceeded. During pairing verification, the Apple log shows: state: authenticated, and the Android side triggers the callback onPairingVerificationSucceed. My iPhone is iPhone 13， iOS 26.0 （23A5287g）

Our goal is to establish a Wi‑Fi Aware data path (NDP) between Apple and Android devices. Apple will act as the Publisher, and Android will act as the Subscriber. Apple-to-Android pairing has already been completed. The Android device can be normally displayed on the Apple official Wi-Fi Aware Sample. However, the indicator is not green. During pairing, the Apple log shows: state: authenticated, and the Android side triggers the callback onPairingSetupSucceeded. During pairing verification, the Apple log shows: state: authenticated, and the Android side triggers the callback onPairingVerificationSucceed. The Android side sends an NDP request to Apple (as shown in the figure 1), but Apple does not reply. Note: Qualcomm’s NDI and NMI are different. In addition, after Apple-to-Apple pairing is completed, the paired device will be recorded in “Settings → Privacy & Security → Paired Devices”. However, after Android-to-Apple pairing is completed, the device is not saved to this list. My iPhone model: iPhone 13, iOS 26.0 (23A5287g).

Dear apple: Our app uses the BSD socket interface for socket communication over the local area network. However, when using the socket's connect interface, some iPhone devices fail, and the socket has also bound the local Wi-Fi card's IP using the bind interface. The errno is 65, indicating "no route." We have checked that the app has already requested local network permissions and permissions to use the local area network. The TCP server on the other end is also listening normally. Please help us see if any additional permissions need to be requested. Thank you

When using the NEHotspotConfigurationManager applyConfiguration interface for network connection, there is a certain probability of encountering the "Unable to join network" error. We captured the system logs when the issue occurred, some errors are due to the network not being scanned, while others are rejected by the system（console logs like:WCLScanManager scan is blocked by other system activity 32 or 9）. If there are any methods to optimize or avoid these errors?

Dear Apple: We are developing a file management-related app, I want to configure com.apple.security.temporary-exception.files.absolute-path.read-write to /Users/*** in the entitlements. Will this affect the approval process of our app on the App Store?

Dear Apple: We are developing a file management-related app, and I would like to retrieve the list of files from the "Recents" section under "Favorites" in the Mac sidebar, then display this information in the app's interface for users. Is there an API available to obtain this information?