How to add speech recognition in + capability in Xcode there is no "Speech Recognition" in the list.

I'm running macOS 15.5. I now have Xcode 26 and I'm testing my iOS app against iOS 26. I've encountered several UIKit / iOS 26 bugs I'd like to report. In Feedback Assistant I choose "Developer Technologies & SDKs". Eventually I get asked "What build does the issue occur on?". The list of choices is: iOS 18.2 Seed 4 iOS 18.1.1 iOS 17.7.2 An earlier iOS build I'm not sure So how to I report this as an iOS 26 beta 1 issue?

In the availability and pricing section, we have reviewed the plans and we will be upgrading to 50 or 100 million calls/month but before we do, we have a couple questions. Does the API have rate limit or throttling? Do you have additional weather forecast endpoints like hail, radar, or pollen forecast? I see in this thread https://developer.apple.com/forums/thread/795642 that air quality is not available Thanks

Hi, I’m trying to free up space on my computer and have uninstalled Xcode. However, I noticed that many large files remain on the filesystem even after uninstalling it. The largest remaining files (~33 GB) are iOS Simulator images located at: /System/Volumes/Data/Library/Developer/CoreSimulator/Volumes I attempted to delete them using root privileges, but it seems that these system files are mounted as read-only. I’m reaching out to ask for guidance to ensure that these files do not contain anything important for macOS, and that it’s safe to remove them before getting in recovery mode. Thank you very much for your advice!

TL;DR version: AkVox - “Your App in Your User’s Language” Quickly and easily localize your app into as few or as many languages as you want with AkVox. Longer version: AkVox can localize any Xcode project. Simply drag your Exported Localizations folder into AkVox, click translate, then export, and you’re ready to import the translated localizations catalogs back into Xcode. Alas, you cannot import the whole localizations folder as one, you must import each catalog individually, a process that takes around 10 seconds per language. AkVox can also assist you when you’re ready to publish your app on App Store Connect. You can create a list of texts you will enter to promote your app and AkVox will translate them. Again, you can’t apply all your translations to the App Store in ne go, you have to apply each language individually. To make this task less painful, AkVox has a convenient set of buttons to make the copy and paste process as quick and simple as possible. The same arrangement is available when you come to add “mini texts” during setting monetization subscriptions. AkVox employs Google Cloud Translate which means you will need an API Key to be able to run full translations. However, Google offers a generous monthly allowance of 500,000 characters to be translated for free each month. This may well mean that you don’t ever pay for the translation process, just the very low price to use AkVox. The free version of AkVox simulates translating by substituting jumbled versions of Hamlet’s “To be or not to be” speech – this is instead of utilising what would normally be used in this case, the tediously dull Lorem Ipsum text. To see AkVox explained in detail, go to the website: https://akvox.com/

My app will not open to myself or to clients and has a pop up that claims "App Outdated" The app version you are using is no longer supported. Please install he latest Heartland update through the App Store. However, there have been no updates to the app.

Hi, I really appreciate the C++ binding provided. I got the metal-cpp source code from the website at Getting Started. However, I could not find the same for metal-cpp-extensions. Is it not available or do we have to always extract it from the sample code? Thanks.

We are developing a cross platform c++ application. We also use some objective-c (no swift) and specific Apple frameworks like AVFoundation, CoreML in the MacOs version of our software. We use Apple Clang as compiler when building for MacOs. As our code is primarily c++ we would like to use the latest and greatest c++ 20 features. So we are looking into using vanilla clang instead, the builds with vanilla clang seem to work fine, however our concern is that we might have overlooked possible issues that could arise. So our question is whether there are specific things we need to address when switching compilers, are there things that we need to be aware of? In the end we just want to know if switching compilers won't cause problems we can't oversee. So we would like to know if others took the same steps and what your thoughts/experiences are regarding this?

Hello! I am trying to automate iOS builds for my Unreal Engine game using Unreal Automation Tool, but I cannot produce a functionnal build with it, while packaging from XCode works perfectly. I have tracked down the issue to a missing file. I'm using the Firebase SDK that requires a GoogleService-Info.plist file. I have copied this file at the root of my project, as the Firebase documentation suggests. I have not taken any manual action to specify that this file needs to be included in the packaged app. The Firebase code checks the existence of this file using NSString* Path = [[NSBundle mainBundle] pathForResource: @“GoogleService-Info” ofType: @“plist”]; return Path != nil; If I package my app from XCode using Product -> Archive, this test returns true and the SDK is properly initialized. If I package my app using Unreal Engine's RunUAT.sh BuildCookRun, this test returns false and the SDK fails to initialize (and actually crashes upon trying). I have tried several Unreal Engine tricks to include my file, like setting it as a RuntimeDependecies in my projects Build.cs file. Which enables Unreal Engine code to find it, but not this direct call to NSBundle. I would like to know either how to tell Unreal Engine to include files at the root of the app bundle, or what XCode does to automatically include this file and is there a way to script it? I can provide both versions .xcarchive if needed. Thanks!

Hello, PrivacyInfo.xcprivacy Is primordial and without it the app is rejected from the Store I believe. All 5 ressources I had found related to it, mention XCODE, or explain how to add the code to langages that I don't use (Switf i think?) etc. I am building the app thought CI/CD, so prior to building it the app does not have privacy manifest and there is not way to generate it automatically without xcode it seems. My app is written in Flutter prior to becoming an iOS app. I am seeking for a method to do that. Thanks.

unable to find developer runtimes in this list https://developer.apple.com/download/all/?q=simulator%20runtime also, can see it's not being published since iOS 18.2 release, any specific reasons for it? or is the download link changed here?

i am trying to create key for apn file to use it in firebase fcm for my app but when click on download this error occured Download Failed Auth Key can only be downloaded once. This auth key has already been downloaded. what should i do ?

Weirdness going on here. Our app is crashing on startup with iPad 7s running iOS 18.5. Before updating to iOS 18.5, it was working fine on iPad 7s. Even with iOS 18.5, it is working fine on every device we have tried including dozens of other iPads and iPhones. We have narrowed it down to the SquareReaderSDK. If we remove that SDK, it will launch and work without issues. But, many of our users need the SquareReaderSDK. The crash happens at app load, before appDelegate didFinishLaunchingWithOptions. So we can't figure out any way to debug the issue. Is anyone else having a similar issue? Square thinks it is an Apple issue.

Hello, I have an iphone but not an ipad Actually a relative has an iPad. The problem I encoutered was when i was testing an app that I had built prior (so I had the ipa file) but no acces to Xcode. The thing is when I wanted to test it on my iphone, everything WENT SMOOTH and ok. When I tried on iPAD, I encounteed the problem I could not unlock the hidden "developer mode" option in any way, I tried so many things, checked and rechecked, the option was and stayed hidden, I could not activate it. Therefore I could not test the app. In the apple store I was required to give a screenshot for iPAD but that failed. because I could not produce ANY, since I could not run my app on iPAD. I actually have no idea how I activated the ability to turn on the developer mode on my iphone, it was just there and I activated it perhaps because I had added the email of my iphone to the developer account somehow? somehwere? But for iPAD I just could not find a way to do it, don't know if adding it somewhere could trigger something on the ipad to allow it to show the developer mode option so I can activate it finally? Anyway, I tried things I read on internet, methods that mention how to activate the developer mode ability on an ios devide though WINDOWS, there were 2 but one I did not trust much, and even I think i tried it and in the end it did not work for some incompatibility making that method obsolete or something? the other I am not sure but probably same idea. I would like to know, how to activate the ABILITY to SHOW the option to activate the developer mode on iPAD (or any other device but for now I am focuson on iPad) please, and without using macbook or xcode!? Could Apple or anyone offer some guidance? That would help a fellow developer. Thank you. Ps. No I cant get the mac or xcode for now (but hopefully in a far future, but for now I can't). Thanks

I have developed a Swift macro called @CodableInit in the SwiftCodableMacro module, and I’m able to use it successfully in my main project. Here’s an example usage: import SwiftCodableMacro @CodableInit // This is for Codable macros public class ErrorMonitoringWebPlugin { public var identifier: UUID = UUID() // MARK: - Codable required public init(from decoder:Decoder) throws { let values = try decoder.container(keyedBy: CodingKeys.self) identifier = try values.decode(UUID.self, forKey: .identifier) } } However, when I try to write a unit test for the ErrorMonitoringWebPlugin class, I encounter an issue. Here's the test case: func testCodableSubjectIdentifierShouldEqualDecodedSubjectIdentifier() { self.measure { let encoder = JSONEncoder() let data = try? encoder.encode(subject) //Here I am getting this error Class 'JSONEncoder' requires that 'ErrorMonitoringWebPlugin' conform to 'Encodable' let decoder = JSONDecoder() let decodedSubject = try? decoder.decode(ErrorMonitoringWebPlugin.self, from: data!) XCTAssertEqual(subject.identifier, decodedSubject?.identifier) } } The compiler throws an error saying: Class 'JSONEncoder' requires that 'ErrorMonitoringWebPlugin' conform to 'Encodable' Even though the @CodableInit macro is supposed to generate conformance, it seems that this macro-generated code is not visible or active inside the test target. How can I ensure that the @CodableInit macro (from SwiftCodableMacro) is correctly applied and recognized within the XCTest target of my main project?

Hi, I am having an issue with xcodebuild -showdestinations command. Steps to reproduce: Create a new iOS application project in Xcode or use an existing one. Navigate to this project in a terminal. Run xcodebuild -project 'your-project-name.xcodeproj' -scheme 'your-scheme' -showdestinations What I expect: All destinations available in the Xcode UI should be listed. What I get: It depends. For new projects, I consistently get only generic platform destinations and my connected physical device. When I run the same command on an older project, I sometimes see all the expected destinations. It seems to be a roughly 50/50 chance between the two outcomes. Is there a way to get consistent results from xcodebuild -showdestinations? What can I do to ensure all destinations are listed reliably? Here is a more detailed log and a screenshot: ❯ xcodebuild -workspace 'WorkoutDiary.xcworkspace' -scheme 'WorkoutDiary' -showdestinations Command line invocation: /Applications/Xcode.app/Contents/Developer/usr/bin/xcodebuild -workspace WorkoutDiary.xcworkspace -scheme WorkoutDiary -showdestinations User defaults from command line: IDEPackageSupportUseBuiltinSCM = YES 2025-06-17 19:13:50.261 xcodebuild[34753:6177985] DVTDeviceOperation: Encountered a build number "" that is incompatible with DVTBuildVersion. 2025-06-17 19:13:50.342 xcodebuild[34753:6177959] [MT] DVTDeviceOperation: Encountered a build number "" that is incompatible with DVTBuildVersion. Resolve Package Graph Resolved source packages: <REDACTED> Available destinations for the "WorkoutDiary" scheme: { platform:macOS, arch:arm64, variant:Designed for [iPad,iPhone], id:<REDACTED>, name:My Mac } { platform:iOS, arch:arm64, id:<REDACTED>, name:<REDACTED> } { platform:iOS, id:dvtdevice-DVTiPhonePlaceholder-iphoneos:placeholder, name:Any iOS Device } { platform:iOS Simulator, id:dvtdevice-DVTiOSDeviceSimulatorPlaceholder-iphonesimulator:placeholder, name:Any iOS Simulator Device } ❯ xcodebuild -workspace 'WorkoutDiary.xcworkspace' -scheme 'WorkoutDiary' -showdestinations Command line invocation: /Applications/Xcode.app/Contents/Developer/usr/bin/xcodebuild -workspace WorkoutDiary.xcworkspace -scheme WorkoutDiary -showdestinations User defaults from command line: IDEPackageSupportUseBuiltinSCM = YES 2025-06-17 19:13:52.393 xcodebuild[34757:6178035] DVTDeviceOperation: Encountered a build number "" that is incompatible with DVTBuildVersion. 2025-06-17 19:13:52.472 xcodebuild[34757:6178020] [MT] DVTDeviceOperation: Encountered a build number "" that is incompatible with DVTBuildVersion. Resolve Package Graph Resolved source packages: <REDACTED> Available destinations for the "WorkoutDiary" scheme: { platform:macOS, arch:arm64, variant:Designed for [iPad,iPhone], id:<REDACTED>, name:My Mac } { platform:iOS, arch:arm64, id:<REDACTED>, name:<REDACTED> } { platform:iOS, id:dvtdevice-DVTiPhonePlaceholder-iphoneos:placeholder, name:Any iOS Device } { platform:iOS Simulator, id:dvtdevice-DVTiOSDeviceSimulatorPlaceholder-iphonesimulator:placeholder, name:Any iOS Simulator Device } { platform:iOS Simulator, id:DBFB9613-0261-4544-908A-335570F3C35F, OS:18.3.1, name:iPhone 11 } { platform:iOS Simulator, id:A48C309C-231A-4197-A295-900F89C94D86, OS:18.3.1, name:iPhone 16 Pro Max }

Title basically explains what my issue is, from what I understand the only way to set an icon in an tauri app is using a icns file, I could be wrong but I don't know how to get macos theme changing stuff to work with it because of the icns file.

I developed an app using Unity and exported it as an iOS project file so that I could package it in Xcode. Now, I’m facing an issue where users who previously installed version 1.0 are still seeing the old version after installing the updated version 2.0. Although the installation process for version 2.0 appears to complete (with the installation animation), the app still opens as version 1.0. I am an individual developer but used enterprise signing for distribution. I’m quite confused and have looked into the issue—some sources mention it might be related to CFBundleVersion, but modifying it didn’t help. I’d really appreciate some help with this. o(╥﹏╥)o

There is a bug in Unity Plugins: Corehaptics.AssetPickerDrawer throws exceptions and draws incorrectly when fieldInfo or assetType is null (FB17305973). I fixed it and created a pull request: https://github.com/apple/unityplugins/pull/47 It has been months and this bug is really annoying.

I try to distribute my App again, but receive now the error that the Minimum IOS is not supported by Info.plist with Runner. i have latest XCode and the error stays whatever IOS I Set in General and in the building rules. Any one has an idea or had same issue since recent Xcode / project Updates ? thanks so much