I’m developing an app that uses Family Controls to block other apps. I’ve already received approval from Apple for the entitlement, and everything works perfectly when I run the app from Xcode on a physical device. However, when I upload the same build to TestFlight, the app installs and runs, but the Family Controls functionality doesn’t work — it seems like the entitlement isn’t being applied in the TestFlight version. So I’d like to ask: 👉 Do Family Controls entitlements work automatically on TestFlight builds, or is there any additional step required to enable them?

Hello, I've encountered unexpected behavior related to version information in our app logs, and I'd like to ask for some advice. We reviewed logs collected from a user running our app (currently available on the App Store). The logs are designed to include both the build number and the app version. Based on the build number in the logs, we believe the installed app version on the user's device is 1.0.3. However, the app version recorded in the logs is 1.1.5, which is the latest version currently available on the App Store. In our project, we set the app version using the MARKETING_VERSION environment variable. This value is configured via XcodeGen, and we define it in a YAML file. Under normal circumstances, the value defined in the YAML file (MARKETING_VERSION = 1.0.3) should be embedded in the app and reflected in the logs. But in this case, the version from the current App Store release (1.1.5) appears instead, which was unexpected. We'd like to know what might cause this behavior, and if there are any known factors that could lead to this. Also, is it possible that MARKETING_VERSION might somehow dynamically reflect the version currently available on the App Store? YAML: info.plist:

I wanted to rollback a commit. So I shifted to the commit before it. Then I added new commits on the one I switched to, not realising this is not happening on the main branch. Now what do I do? Neerav

So, as we found out from WWDC, the migration to Apple Silicon is inevitable. Does anyone have a good recommendation for a replacement for Macintosh Common Lisp on Apple Silicon? I was using it back in the MPW days and struggling to keep the Lisp code working, but Apple Silicon has thrown a money wrench at it! Thanks in advance for any advice on any available Apple Silicon Lisp development tools!

I need to install the AirPlay profile on an iphone to watch decrypted traffic in ATS for development work on CarPlay. The documentation for ATS says to click "Utilities -> Download Profiles -> AirPlay Diagnostic Mode". When I do this, it brings up a file dialog, presumably to select a location to download. But nothing happens. The other profiles launch a web browser and download the .mobileconfig profile. How do I get the AirPlay profile? Am I misunderstanding how this is supposed to work? I found ATSAssetsInfoDefault.plist which references these files. And they all have https://developer.apple.com/services-account/download?path=/iOS/iOS_Logs/... except the AirPlay profile, which is type "slug" and just says ats-airplay-diagnostic-mode-profile. Is this a bug in the app?

I am developing a simple watch app and I use my personal watch for development with Xcode. Personal watch is series 10 gps only. I have two other watches that I want to use for testing the app, but not needing them to be connected to Xcode. The test watches have cellular option, and I need a cell plan per watch because the watches need to be standalone, not counting initial setup. To get the standalone cell plan the watches need to be configured using AWFK. Here is what I have tried/current issues. I switch between all three watches on my phone using the watch app. Originally tried to put test watches in developer mode, thinking I would connect to Xcode, developer mode is not available when watch is setup using AWFK. Pushed the watch app to apple connect, setup TestFlight group, added the test users and my phone user, accepted invites TestFlight is installed on my phone, I see the testflight setup for the watch app I set a test watch using watch app on the phone, run install for the test app from TestFlight on the phone, spinner moves for awhile then goes back to Install. I am not able to get the watch app installed on the test watches from the phone. Is what I am attempting to do supported? I haven't found much specific documentation on this. If I pair the test watches as regular watches, set them to developer mode, can I pair them again as AWFK and will developer mode survive the switch? Or is there something really simple that I'm overlooking? Appreciate any help that can be extended.

Hello, We tried calling Apple support who suggested they cannot help and work thru emails and discussion forums to resolve the technical issue we are facing to post our first App in App Store. I have given admin level credential to my son (minor) allowing him to incorporate his Xcode to App Store with his credentials. Apparently, he keeps getting error he does not have enough credentials to do so and we are unable to proceed further. I acknowledge I am not a developer & Apple support team was unable to help, I wonder if there is specific support channel I need to follow to resolve the issue. His App is going to help is Robotics team in upcoming event and we appreciate if someone can kindly point me to right direction to resolve the matter at earliest.

Good morning. I have an APPLE DEVELOPER ACCOUNT. I am inquiring about Distributing In House Apps using my own website. All the links so far do not help. They all seem to be relevant to the Apple Store and not In House apps. I have my apps ready for evaluation. I understand you need to evaluate them. I want to apply for a certificate that will allow me to put the apps on my OWN website and have users download these and install to their Apple devices. So far I have been testing using own devices but every build I create does NOT create a manifest file. They do work but obviously I need a manifest for the website. I assume a relevant certificate would provide that. Can you please let me know of any and all information that applies on how to apply for an In House Distribution Certificate and how and where I should upload my apps for evaluation. Thank you so much. John

Hi, I'm generating MusicKit JWT tokens on my backend side and using it on the client side to query the Apple Music API. One concern I have is accidentally over issuing the scope of this JWT, resulting in accidental access more services than intended like DeviceCheck or APNS. Other than using separate keys for MusicKit and other services, is there a way to limit the generated JWT to only the Apple Music API (https://api.music.apple.com/v1/*) using the JWT payload scope?

Device: iPhone 13 OS Version: iOS 26.4, iOS 26.5 Summary: The Settings app crashes when accessing the Sandbox account management screen in Developer Settings while the device is offline. Steps to Reproduce: Enable Developer Mode on the device Disconnect from the internet (Wi-Fi and cellular off) Go to Settings → Developer Ensure a Sandbox account is signed in Tap on "Sandbox" Tap on "Manage" Expected Result: The system should either: Open the Sandbox management screen, or Show an error indicating no internet connection Actual Result: The Settings app crashes immediately after tapping "Manage". Reproducibility: Always (100%) when offline Additional Notes: Issue observed on iOS 26.4 and iOS 26.5 Does not occur on iOS 18 May also be present in other iOS 26.x versions Does not occur when the device has an active internet connection

Hello there everyone. I've got numerous support projects using old school development. Things from Objective-C to RxSwift and UIKit. I've tried the LLM/Agents and they just destroy the codebase over time, so I have given up. The final straw was trying to get it to fix a POSTCODE validation issue which was using some novel ways to provide validation in place using RxSwift. Has anyone had any luck with these LLMs on Legacy codebases? Would love to hear tips.

Hi everyone, I'm developing a visionOS application using Unity with an enterprise developer account. I applied for the Main Camera Access entitlement, but at the time of submission, the email address associated with my Apple ID was deactivated, so I couldn’t receive any email communication from Apple. Later, I updated the email address for my Apple ID. Now, in the Apple Developer portal under Identifiers, I can see that my app has been granted Main Camera Access, and I can also add the corresponding capability in Xcode. However, according to Apple’s documentation(https://developer.apple.com/documentation/visionos/building-spatial-experiences-for-business-apps-with-enterprise-apis): “To use entitlements, you need to include both the entitlement file and a corresponding license file in your app. After Apple approves your app for one or more entitlements, you receive a license file, along with additional instructions.” I never received this license file, possibly due to the deactivated email. I don't know where to find it or how to retrieve it now. What exactly is this license file? If it was originally sent to an unreachable email, how can I request it again or get it resent? Where in the Apple Developer portal (or elsewhere) can I access or download this file? Any help or guidance would be greatly appreciated! Thanks in advance.

Hello, I have a question about running tests on multiple simulators. Currently, my company has a WDIO+Appium test suite with XCUITEST driver that runs on a single simulator through a mockttp proxy (we are intercepting and mocking some of the responses from our APIs and pass through the rest). In order to route the traffic we are currently using 'networksetup -setsecurewebproxy '. Everything works as expected. With growing number of tests we'd like to scale number of simulators on a single host to 3-5. We have a working setup but the problem are system-wide proxy settings routing traffic from multiple simulators, which we can't distinguish by UDID or any other means, we know of. We can spin multiple mock servers on the same machine but we are struggling to find the way to route the traffic on a simulator basis. In the end, both options are viable: 1 mock server running for multiple simulators N number of mock servers for N number of simulators Has anyone had the same/similar problem? How to approach this? We are currently running on Sequoia OSX and platform version 18.6. Thanks!

Hello, I am facing a critical issue where the Family Controls (Distribution) entitlement is not being applied to my app extensions, despite the main app ID being approved. Main App ID: com.hayashikento.focuspact (Approved on March 13) Extension ID 1: com.hayashikento.focuspact.ShieldActionExtension (Pending/Not visible) Extension ID 2: com.hayashikento.focuspact.ShieldConfigurationExtension (Pending/Not visible) I have submitted requests multiple times, but the entitlement does not appear in the "Capability Requests" for these extensions in the Certificates, Identifiers & Profiles portal. Furthermore, I am unable to contact Developer Support because the "Contact Us" form on the developer website consistently shows a "Request error" or freezes on the submission page. Since I am completely blocked from TestFlight distribution, could someone from Apple please look into my account (Team ID: UHG4J7F7NH) and manually sync these entitlements? Thank you for your help.

I'm trying to authenticate to a git host using SSH keys stored in 1Password. I have ~/.ssh/config with mode 600 set with a symlink: Host * IdentityAgent "~/.1password/agent.sock" But ssh-add -l shows no identities. If I set $SSH_AUTH_SOCK, ssh-add -l works just fine. I'd love to not have to do this, though. Why doesn't ssh-add seem to read ~/.ssh/config? The built-in version is OpenSSH_10.0p2, LibreSSL 3.3.6. I've searched fruitlessly for an answer anywhere else.

Hello guys, I know people already talked about this here but maybe some of you solved it. When trying Alarmkit, it keeps playing the same default sound. I tried a lot of changes to make it play my custom sound but nothing worked. Has anyone solved this or is it just the alarmkit problem? Thank you and take care guys.

Hi everyone! I change my iPhone but I don't find the voice to activate "Developer Mode". I remember that I activated this feature with my old Xs in few minutes. I don't understand.... I must add the 16 Pro and the new Watch 10 for testing in Xcode. How? Thanks!

I have created and Ios app using xojo, and run using the Xcode simulator. I want to test it on my phone and don't seed to put it on the app store as it is for personal use. I've seen pages that indicate a free apple developer option is available for a limited time but can't for the live of me get my app to actually run on my phone. I've tried both apple configurator and xcode to add my app with no luck

I would like to inquire about a concern related to the app review process. Specifically, I would like to understand if forcefully denying an application's execution on the iOS Simulator (for instance, by implementing a check in the code that prevents the app from running in a simulated environment) could negatively impact or delay the app’s approval during the App Store review process. This measure is intended solely for security and integrity reasons during development and distribution. The app functions normally on real devices, and all other guidelines and requirements outlined by Apple are being strictly followed. Could you please confirm whether such a restriction on the Simulator is acceptable, and if there are any best practices or recommendations from Apple regarding this? Thank you for your support, and I look forward to your guidance.

Hi, I have a .NET MAUI app running on .NET 9. When I test locally in debug or release mode it works perfectly fine, but when testing from TestFlight it crashes almost immediately every time. I have sent the crash report to TestFlight and produced the symbolicated.crash file (attached), but I'm not sure it's helpful for understanding how to fix the issue. If anyone can help me understand what the issue might be and any possible fixes it'd be very much appreciated. I'm developing using Visual Studio 2022 paired to my Mac. I have distributed previously without issue, but now can't seem to, even after reverting recent code. net9.0-ios 15.0 symbolicated.crash